How, what and how often it is necessary to lubricate the gearbox motorcosa for durable work

Motokosa gearbox and shaft inside the bar must be lubricated every 15-20 mothers of work. Then your tool for kosba grass will work out the resource laid for it without any serious failures and breakdowns.

To lubricate the lower reducer, the motorcycles turn the largest bolt under the hexagon, which closed the hole for lubrication of gears. In order to efficiently and controlled the lubricant of the lower gearbox, it is better to remove it from the end of the bar. To do this, we turn the fixing bolt also under the hexagon and weaken the nut of the fold bolt on the gearbox body.

The gearbox according to the factory instructions is lubricated with a special composition for gearboxes, but we use a lubricant from the UKO SHRUS-4 company, which is also very suitable for our purpose.

To introduce lubrication into the gearbox body, we use an ordinary medical syringe for 20 cubic meters, which we fill with grease. We insert the piston into place and squeeze out the lubricant into the gearbox, placing a syringe nose into a lubricant.

The required amount of lubricant is controlled by its appearance through the internal hole of the bearing, into which the end of the shaft is inserted. At the same time, air is removed through the hole from the gear cavity, which would prevent the gearbox from filling out if we had not removed it from the shaft.

After filling the gearbox, with lubricant, turn the gears with your hand so that the oil is evenly distributed along the teeth of the gears. Then add a small portion of oil, observing the process visually.

The reducer’s lubricant is completed on this, and we twist into a lubricant previously turned from there a bolt under the hexagon.

We proceed to the lubrication of the shaft, which rotates in the bushings fixed inside the bar with a certain step. The shaft is a steel rod, at the ends of which there are slots necessary for entering the engagement with the upper and lower gearboxes.

We apply grease not only to the helmets of the shaft, but also along its entire length to reduce the production of the shaft and bushings in which it rotates inside the bar. After lubrication, we install the shaft back, passing through all the bushings, and introducing into the ending with gearboxes.

The upper gearbox does not require lubrication, t. to. It has a closed bearing, and the lubricant from the gearbox does not go anywhere.

The lubricant is over. We put on the lower gearbox at the end of the bar, fix it on the rod with a bolt under the hexagon and tighten the nut of the fold bolt on the gearbox body.

How to lubricate a trimmer gearbox for grass or motorcycles: proper care of garden equipment | (Photo video)

Many Trimmer users do not pay much attention to servicing their tools. In particular, this applies to such a node of motorcycles as a gearbox. The work of the gearbox is associated with heating.

With prolonged operation, motorcycles occur regular overheating of the gearbox, which leads to its breakdowns. Reducer breakdown leads to the fact that the tool is unsuitable for operation and it must be repaired.

Reducer repair is an expensive event, so it is recommended not to bring the tool to such a state. The main reason for overheating of the gearbox and its failure is the absence of lubrication in it.

The article tells how to properly lubricate the gearbox of a trimmer for grass to avoid its breakdowns.

Necessary tools and materials

The following tools and materials will be needed for the maintenance of the gearbox:

Hexagonal key for opening the reducer lubricant hole

Usually, such a key is included with a motorcycle or trimmer.

The next tool is a regular medical syringe with a volume of 10 ml. It is with the help of a syringe that the lubricant enters the gearbox.

It is recommended to use proprietary lubrication from the manufacturer Motokos. In extreme cases, you can use any lubricant to lubricate rotating mechanisms, for example, Litol 24.

We open the gearbox

In order to gain access to the gearbox, it should be opened. To do this is quite simple. you need to unscrew the gearbox with a hexagonal key. This bolt for all Motokos is in the same place. directly near the working body.

Spring refueling action

The diameter of the tube with grease does not correspond to the diameter of the gearbox

In order to easily make lubrication into the gearbox, it is necessary to use the syringe.

Then a syringe is filled with a tube of a tube.

After which the piston is again inserted into the syringe. The syringe is ready to refuel the lubricant in the gearbox.

ACTIVITION OF SUPPLE OF Lubricant in Gear

The syringe is inserted into the gearbox hole

First, the syringe is inserted into the gearbox hole.

Squeezing in the gearbox slightly lubricant and turning it for about a quarter turnover

Then you need to squeeze a little grease in the gearbox and turn it for about a quarter of turn.

When all the lubricant is squeezed out, the process can be considered complete

Lubrication is seasoned in small portions. After each supply of lubrication, the gearbox turns on 1/3. 1/4 turnover. It is advisable to choose the amount of lubrication for each refueling so that the gearbox during the lubricant makes a full revolution.

Activation of the gearbox

After the gearbox is filled with lubrication, twist the gearbox and it is well clamped.

syringe, lubrication, trimmer, gearbox, grass

How to lubricate the motorcosa gearbox (the easiest way)

How to lubricate a trimmer gearbox for grass or motorcycles: proper care of garden equipment | (Photo video)

Feedback with our readers is very important for us. Leave your rating in the Комментарии и мнения владельцев with the argument of your choice. Your opinion will be useful to other users.

Possible problems

There are several common malfunctions that are subject to the gearbox of the lawn mower.

  • Excessive heating. The reason for this problem may be the absence or lack of lubrication, an inappropriate brand of lubricating oil or indelibility of the details of the mechanism (if the gearbox is new). It is quite easy to eliminate such a malfunction-to lubricate (replace grease) with a sufficient amount of oil of a suitable brand or work with a trimmer for some time in a sparing mode with frequent stops.
  • Knocking when working, too much freedom of move and/or stopping during the rotation of the shaft. The prerequisites for the occurrence of such a malfunction can be: failure of a pair of bearings (due to the lack of or incorrect lubrication, excessive operation of the device) or their incorrect installation, as a result of which anthers are damaged. The solution to this problem is the analysis of the mechanism and the replacement of the spoiled parts for pre.ordered new.
  • Reducer staggering or flying from the main pipe. The reason is the improper consolidation of the details of the mechanism or the crack/chip of the body of a mechanical nature. There is only one way out. replace the gearbox body.
  • The problem of fixing the location of the gearbox. The root cause of such a phenomenon is the abrasion of the pipe section on which the part is attached. Larrier repair (for some time) consists in wrapping the place of planting the gearbox with textile isolet or replacing the main trimmer pipe for grass.
  • The trimmer knife for the grass does not spin (at all or at high loads), while unpleasant noises are heard. This malfunction can manifest due to the grinding of bumps of conical gears. The problem is eliminated by the analysis of the mechanism and the replacement of a pair of conical gears.

How to disassemble?

The sequence of actions when disassembling the gearbox for subsequent repair is as follows:

  • First of all, weaken the fasteners (fittings) elements and remove the part from the pipe;
  • Clean the mechanism with a brush moistened in clean gasoline, and dry;
  • Together the ends of the locking circle (using round.drawers) and remove it;
  • Do the same procedure with another stop;
  • Next, warm up the mechanism body using a technical hair dryer;
  • Knock the secondary shaft with gears and a bearing (hitting the upper end of the tree of the tree), you can try to do this without preliminary heating, but you need to use only a wooden hammer to break the shaft. the metal can damage the body or the shaft itself;
  • Do the same procedure with the main shaft.

Now the gearbox is disassembled and prepared to replace individual details.

Lubricant for a trimmer gearbox for grass in Bryansk

Drill multi-slylic lubricant for coffee machines and meat grinder Original Bosch 10g.40/200 is used in models: Bosch TE603201RW/01, Bosch TE603201RW/02, Bosch TE603201RW/03, Bosch TE603201RW/04, Bosch Te603201RW/05, Bosch Te603201RW/07, BOSCH TE603201RW, BOSCH TE603201RW, BOSCH TE60320.

Mineral.based universal oil for lubrication of saw chains, guides, sliding bearings and stars of modern high.speed chain saws. Protects against corrosion and wear, extends the service life of equipment. Recommended for chain saws Huter

Lubrication for gearboxes 250005 is a universal tool that is used in the maintenance of equipment with a gear gear (planetary, hypoid gears), as well as mechanisms operating at temperatures from.40 to 120 degrees for medium or high.

AL-KO garden lubricant for gearboxes, 100 g

Lane lubricant 50g. MS 4115-0 for power tools, prevents the jamming and rusting of toothed gearboxes in corner grinders, peorators, rupture of part 1002 manufacturer VMPUUTO

Lubrication for gearboxes of the Ultra-0 power tool, Vfavto, 50 g

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Vfavto. Lubrication MS Ultra, 200g tube. 1003

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Product: grease for gearboxes; Dimensions, mm: 170x80x50; Weight, kg: 0.12; Product volume, m3: 0.00068; Appointment: for gearboxes; Volume, ml: 100

Lubrication for gearboxes of grass-shirt/bush cutter 100 grams, Husqvarna 5039764-01

High.quality special lubricant for gearboxes, hoses, transmission of coils and motorcade gearboxes. Due to its fluidity, the lubricant spreads evenly in all places even with small volumes. It significantly increases the life and protects against corr.

Lubrication for gearboxes Patriot Arsenal AR-417, 100 g

-457 Multifunctional DDE Multifunctional oil session for 0.1l gearboxes (NLGI 2. Graphite and Molybdenum di-Sulph multi-purpose, antifriction, waterproof lubrication with EP additives. Application: gearboxes and flexible shafts of motorcycles, trimmers and black cutters; Roller and needle bearing.

Multifunctional DDE oil-mesh for gearboxes 0.1l (NLGI 2. Graphite and Molybdenum Di-Sulph

Elitech 2006 grease name for garden technology.000300. Category of oil technology oil. Type of product lubrication. The type of engine is two.stroke and four.stroke. Seasonality is all.season. Additional information for gearboxes

Lubrication for garden technology Elitech 2006.000300, 125 g

Lubrication of brake mechanisms CRC Braklube Pro 100 ml

High.temperature lubricant Vitex Termo Grease

Pro-Gold. Lubrication, which is in demand of shooters around the world. A specially designed high.quality formula is designed to lubricate and protect weapons, fishing accessories, crossbows. Suitable for use on weapons made of stainless steel, chron.

Universal lubricant Weldtite TF2 ENDURANCE CERAMIC LUBRICANT for chain, cables and shirts. Improved composition with ceramics, for all.weather use. Volume 100 ml

Weldtite lubricant Weldtite Ceramic Lube 100 ml

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T.h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for a long time.

Lubrication for Ultra power tools System package 50 g

Designed for gear gearboxes, planetary and hypoid gears. The special additives included in the composition provide reliable operation of the mechanisms for a long time and effective lubrication of the nodes, prevents them from overheating

Lubrication of gearboxes for Ultra-0 50 g of VMPAVTO 1002

Machine oil (domestic lubricant) in an oil 50 ml, suitable for use at home, for lubricating locks, door loops, various mechanisms. Protects parts from corrosion

Lubricant for the Makita gearbox. 30g, for peorators

syringe, lubrication, trimmer, gearbox, grass

Arsenal Patriot AR-417 lubricant is designed for high-speed gearboxes, also in closed gearboxes with cylindrical and conical gearboxes. Due to its fluidity, the lubricant spreads evenly in all places even with small volumes. It is significant.

Lubrication for reducers of trimmers. 595 goods.595 goods

Lubrication for gearboxes 250005 is a universal tool that is used in the maintenance of equipment with a gear gear (planetary, hypoid gears), as well as mechanisms operating at temperatures from.40 to 120 degrees for medium or high.

Mineral.based universal oil for lubrication of saw chains, guides, sliding bearings and stars of modern high.speed chain saws. Protects against corrosion and wear, extends the service life of equipment. Recommended for chain saws Huter

Drill multi-slylic lubricant for coffee machines and meat grinder Original Bosch 10g.40/200 is used in models: Bosch TE603201RW/01, Bosch TE603201RW/02, Bosch TE603201RW/03, Bosch TE603201RW/04, Bosch Te603201RW/05, Bosch Te603201RW/07, BOSCH TE603201RW, BOSCH TE603201RW, BOSCH TE60320.

Lane lubricant 50g. MS 4115-0 for power tools, prevents the jamming and rusting of toothed gearboxes in corner grinders, peorators, rupture of part 1002 manufacturer VMPUUTO

syringe, lubrication, trimmer, gearbox, grass

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Composition: Lubrication for gearboxes multi-purpose ECO 100 g (OG-101)

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

-457 Multifunctional DDE Multifunctional oil session for 0.1l gearboxes (NLGI 2. Graphite and Molybdenum di-Sulph multi-purpose, antifriction, waterproof lubrication with EP additives. Application: gearboxes and flexible shafts of motorcycles, trimmers and black cutters; Roller and needle bearing.

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T.h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for a long time.

Arsenal Patriot AR-417 lubricant is designed for high-speed gearboxes, also in closed gearboxes with cylindrical and conical gearboxes. Due to its fluidity, the lubricant spreads evenly in all places even with small volumes. It is significant.

Elitech 2006 grease name for garden technology.000300. Category of oil technology oil. Type of product lubrication. The type of engine is two.stroke and four.stroke. Seasonality is all.season. Additional information for gearboxes

High.quality special lubricant for gearboxes, hoses, transmission of coils and motorcade gearboxes. Due to its fluidity, the lubricant spreads evenly in all places even with small volumes. It significantly increases the life and protects against corr.

Machine oil (domestic lubricant) in an oil 50 ml, suitable for use at home, for lubricating locks, door loops, various mechanisms. Protects parts from corrosion

Product: grease for gearboxes; Dimensions, mm: 170x80x50; Weight, kg: 0.12; Product volume, m3: 0.00068; Appointment: for gearboxes; Volume, ml: 100

Designed for gear gearboxes, planetary and hypoid gears. The special additives included in the composition provide reliable operation of the mechanisms for a long time and effective lubrication of the nodes, prevents them from overheating

Universal multi-purpose outdadical plastic lubric lubricant based on highly purified mineral basic oil with the addition of anti-sympathetic and outfit (Ep.Extreme Pressure) molybdenum and lubricant disulfide, which has a high t.

A lubricant for servicing bearings, gearboxes, stars, slotted compounds in peorators, jackhaled hammers, trimmers, chainsaws and other construction, garden and household tools. Due to the soft consistency, it is evenly distributed throughout the mechanism, the effect.

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Mineral motor oil. 2-stroke engine

Engine oil. 2-stroke/4-stroke engine

Lubrication for reducers of trimmers

Lubrication for gearboxes 250005 is a universal tool that is used in the maintenance of equipment with a gear gear (planetary, hypoid gears), as well as mechanisms operating at temperatures from.40 to 120 degrees for medium or high.

AL-KO garden lubricant for gearboxes, 100 g

Lane lubricant 50g. MS 4115-0 for power tools, prevents the jamming and rusting of toothed gearboxes in corner grinders, peorators, rupture of part 1002 manufacturer VMPUUTO

Lubrication for gearboxes of the Ultra-0 power tool, Vfavto, 50 g

Mineral.based universal oil for lubrication of saw chains, guides, sliding bearings and stars of modern high.speed chain saws. Protects against corrosion and wear, extends the service life of equipment. Recommended for chain saws Huter

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Vfavto. Lubrication MS Ultra, 200g tube. 1003

Drill multi-slylic lubricant for coffee machines and meat grinder Original Bosch 10g.40/200 is used in models: Bosch TE603201RW/01, Bosch TE603201RW/02, Bosch TE603201RW/03, Bosch TE603201RW/04, Bosch Te603201RW/05, Bosch Te603201RW/07, BOSCH TE603201RW, BOSCH TE603201RW, BOSCH TE60320.

Lubricant for the Makita gearbox. 30g, for peorators

Machine oil (domestic lubricant) in an oil 50 ml, suitable for use at home, for lubricating locks, door loops, various mechanisms. Protects parts from corrosion

Universal multi-purpose outdadical plastic lubric lubricant based on highly purified mineral basic oil with the addition of anti-sympathetic and outfit (Ep.Extreme Pressure) molybdenum and lubricant disulfide, which has a high t.

Lubrication Mannol EP-2 Multi-Mos2 Grease 0.23 kg

Product: grease for gearboxes; Dimensions, mm: 170x80x50; Weight, kg: 0.12; Product volume, m3: 0.00068; Appointment: for gearboxes; Volume, ml: 100

Lubrication for gearboxes of grass-shirt/bush cutter 100 grams, Husqvarna 5039764-01

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T.h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for a long time.

Lubrication for reducers of trimmers in St. Petersburg

Lubrication for gearboxes 250005 is a universal tool that is used in the maintenance of equipment with a gear gear (planetary, hypoid gears), as well as mechanisms operating at temperatures from.40 to 120 degrees for medium or high.

AL-KO garden lubricant for gearboxes, 100 g

Mineral.based universal oil for lubrication of saw chains, guides, sliding bearings and stars of modern high.speed chain saws. Protects against corrosion and wear, extends the service life of equipment. Recommended for chain saws Huter

Drill multi-slylic lubricant for coffee machines and meat grinder Original Bosch 10g.40/200 is used in models: Bosch TE603201RW/01, Bosch TE603201RW/02, Bosch TE603201RW/03, Bosch TE603201RW/04, Bosch Te603201RW/05, Bosch Te603201RW/07, BOSCH TE603201RW, BOSCH TE603201RW, BOSCH TE60320.

Lane lubricant 50g. MS 4115-0 for power tools, prevents the jamming and rusting of toothed gearboxes in corner grinders, peorators, rupture of part 1002 manufacturer VMPUUTO

Lubrication for gearboxes of the Ultra-0 power tool, Vfavto, 50 g

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Vfavto. Lubrication MS Ultra, 200g tube. 1003

Lubrication for gearboxes multi-purpose ECO 100 g (OG-101)

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

syringe, lubrication, trimmer, gearbox, grass

-457 Multifunctional DDE Multifunctional oil session for 0.1l gearboxes (NLGI 2. Graphite and Molybdenum di-Sulph multi-purpose, antifriction, waterproof lubrication with EP additives. Application: gearboxes and flexible shafts of motorcycles, trimmers and black cutters; Roller and needle bearing.

Multifunctional DDE oil-mesh for gearboxes 0.1l (NLGI 2. Graphite and Molybdenum Di-Sulph

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T.h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for a long time.

Lubrication for Ultra power tools System package 50 g

Arsenal Patriot AR-417 lubricant is designed for high-speed gearboxes, also in closed gearboxes with cylindrical and conical gearboxes. Due to its fluidity, the lubricant spreads evenly in all places even with small volumes. It is significant.

Lubrication for gearboxes, Patriot, Arsenal AR-417, 100 g, 855400417

Elitech 2006 grease name for garden technology.000300. Category of oil technology oil. Type of product lubrication. The type of engine is two.stroke and four.stroke. Seasonality is all.season. Additional information for gearboxes

Lubrication for a gasoline trimmer for grass

Correctly selected care for the motorcycle system gives a guarantee of durability and quality work of equipment. Manufacturers try to take into account all the nuances and prescribe which materials to use for service. Typically, a specific type of lubricant is not indicated, well.known standards are simply given to which lubricants must comply with.

Lubrication should be selected in such a way as to take into account the temperature, rotation speed, load dynamics and vibration. The main requirement is that this mixture remains in the maximum friction zone.

Lubrices should have good anti.corrosion properties, reliably protecting the nodes from rust.

Based on the above information, it should be noted that the manufacturers of the benzos are developing universal additional funds for their equipment. It can be served by general.industrial compositions. The main condition is compliance with operating conditions, namely, the presence of a substance against rust and lime, as well as a filler, which consists of a solid lubricant. The lubricant is poured into a gearbox into a special hole, while the node is not dismantled.

Replacement is performed quickly enough.

  • First, turn off the device from the network. From devices on gasoline, you must drain gasoline.
  • If the lubricant changes completely, then be sure to wash the gearbox. To do this, pour the cleaner first, then rinse the gearbox well, then drain. It is important to clean the body completely.
  • A special tool that is included with the trimmer, you need to turn the gearbox cork.
  • We apply a new lubricant: insert a syringe with a tube into the hole and squeeze out a lubricant (2-5 ml).
  • Manually turn the shaft, turn on the braid on small turns without load. This is necessary so that the lubricant is qualitatively distributed in places subject to maximum friction.

Prevention and possible malfunctions of the gearbox

The lawn mower requires the first prevention immediately after the purchase, because the manufacturer lays a small amount of grease. If a trimmer for grass performs a small amount of work, then lubricate the device at the beginning and at the end of the season. If the lawn mower works a lot, then we lubricate after 30-55 hours of operation.

If the lubricants are not enough, then it is completely changed. Manufacturers try to produce universal chemistry, which is suitable for processing various hoses and nodes.

The main faults include the most common options.

| Denial of responsibility | Contacts |RSS