The principle of operation of an electric tile cutter with water cooling

One of the most important tools during tile laying is tile cutter, since it is largely dependent on the overspending of the material.

Manual tiles can be effective only for small work at home. Almost the same applies to simple electrical tools, due to the rapid wear of their cutting blades and inconvenience in the work, serious work cannot be completed by them. Electric tiles with water cooling gives maximum efficiency in operation, its diamond blade serves for a very long time.

over, when using such a tool, it is almost impossible to break the tiles that due to its high cost it can be very invoice. In this regard, in professional activities, exclusively third type tiles are used.

Features in working with a tile

As can be seen from the images, electrical tiles of this type are quite massive, which can be concluded about their use in a static position.

To do this, they are put on special stands-stands, thus guaranteeing the most convenient height when cutting tiles. Such an installation must be connected to an electric network 220 V and a water supply system.

The working height when using a tile cutter is approximately equal to one meter, which makes it possible for a person to cut tiles standing in full height and without tired. These tables often have the property of adjusting the height of the legs, which allows you to install the most comfortable working height of the tool for each master.

Water cooling tiles are considered one of the safest cutting tools. This can be explained by a well.fixed cutting blade that moves only in a straight line. It is worth noting that it is equipped with a protective casing, which makes random production injuries impossible.

Unlike the Bulgarians, the probability that during operation it will jam or break the blade tends to zero.

Any possible injuries when working with a tool connected to an electric network and a rotating blade can be explained only by extreme negligence and non.compliance with safety precautions.

An example of an electric tile cutter can be viewed below at

Features, advantages and disadvantages

The main feature and difference between the electrical model of the tile cutter is its design. It is more extensive and specialized, which allows you to do the operation of the most convenient. It is worth noting universality in the processing of a variety of materials. this is both standard porcelain tiles and various stones and other similar materials. The scope of the use of electrical models is much wider due to functionality and efficiency.

There are quite a lot of advantages, so you should start with the most significant. The presence of water cooling allows the product to perform important functions. One of them is to maintain the workplace clean. Water is directly associated with dust, which does not allow it to rise next to the user.

If at a time you need to cut not so much tiles, then you can operate the tool without means of protection of the respiratory system.

As well as such models provide high quality process due to built.in structures, such as guides and special breakdowns. With their help, the tile will be cut without any chips and cracks. The edges are even and without roughness. If the tile cutting provides for a change in the corner of the edge, then you can process the products more variable, which takes place in those situations where the customer requires such execution from the master. In addition to the advantages, there are drawbacks. Although they are insignificant, they still have to face them during work. The first minus is due to the fact that it is necessary to constantly ensure the functioning of water cooling. If it is a standard action option, then the user will need to periodically add water, and devastate the provided containers.

When cooling is circular, then after several cycles the liquid becomes very dirty, contains small particles and dust. The second minus should be called the price. As a rule, electric tiles are popular with those who work with them, if not constantly, then at least periodically. If you only need to process a small amount of material as part of one repair, then it is better to do with mechanical products. They are less productive, but in such a situation the key will be the cost, which is noticeably less than that of electrical units with water cooling.

Device and principle of action

The design of such tools is a certain set of some elements. The basis of the product is a metal table on the supporting legs. In most cases, the material of the manufacture of this part is stainless steel, which meets all the requirements of the strength and ease of operation. A system of guides and stops is built into the design. It is they who increase the accuracy of processing, as they allow you to tightly consolidate the material of a variety of sizes depending on the dimensions of the table. Power is provided by connecting an electric drive with a cutting tool.

Its diameter in most cases reaches 200 mm or more, although there are some models with optionally small diamond circles specialized for fine cutting of tiles.

See How Termites Inspired a Building That Can Cool Itself | Decoder

adjustment, electric, tiles, water, cooling

The cooling system is represented by a fluid tank, a hose and pump for water supply. This is a standard device, but also some manufacturers expand the supply kit to make the work of products more productive.

For example, certain models have an additional drawback table of the table, increasing its length. In this regard, the user can place more material and process several large blanks in one entry. As well as professional units are equipped with rotary corner mechanisms located on top. A big plus is the presence of a system of mobile stops and cloths that allow you to more variable to fix the material and process it in an unusual way. Experienced craftsmen often purchase machines with lighting devices fixed from the side. This element is also optional, but makes the operation more convenient.

Figure cutter using an electric tile cutter

Electric tile cutter will help in creating a complex pattern on the tile, by figure cutting. However, remember that an electric tool is not a means of point work, too small details with it cannot be made. But the technology of figure cut is simple and consistent:

  • Draw on the tile the required pattern.
  • Using a tile cutter, make cuts in those places in which the tool can work.
  • Durable pliers break off the cut parts.
  • Carry sandpaper process the cuts.

The rules for using an electric tile cutter affect not only the quality of the work performed, but also the duration of operation of the tool. Do not neglect timely care to extend the performance of a tile cutter.

The principle of operation of an electric tile cutter with water cooling

One of the most important tools during tile laying is tile cutter, since it is largely dependent on the overspending of the material.

adjustment, electric, tiles, water, cooling

Manual tiles can be effective only for small work at home. Almost the same applies to simple electrical tools, due to the rapid wear of their cutting blades and inconvenience in the work, serious work cannot be completed by them. Electric tiles with water cooling gives maximum efficiency in operation, its diamond blade serves for a very long time.

over, when using such a tool, it is almost impossible to break the tiles that due to its high cost it can be very invoice. In this regard, in professional activities, exclusively third type tiles are used.

Useful tips

Wavy, embossed tile has a variable thickness. Unlike simpler. smooth, texture. this tile has a significant spread in thickness. You can cut it from the back, as much as possible. through most of the thickness of the material. the processed fragment. Further, with the help of an electrician with saws that have diamond spraying, neatly, in order to prevent excess glossy chips with increased strength, drink the same fragment.

It is strictly prohibited to break in the opposite direction of such a fragment. the screening will be uneven, and the pattern will be spoiled.

Embossed and wavy tiles can be filled with the front side using an angular grinder. Try to make cuts the same (at the same level, in a specific layer of the entire thickness of the tile) depth. Tiles of variable thickness, possessing sharp, rather than smooth, changes, can also be cut by a tile cutter, but here it is necessary to crush a decorative layer (relief) in the dust along the cutting line until the difference in the depths of the cut linear deepening disappears, it is visually easy Control. Then the tile breaks on the sharp corner. along the furrow, which the master drawn.

If the depth of the furrow is the same on the waves of the made section, and the actual residual thickness of the re.cut material. relative to the back. repeats these waves, the features of the relief, then break the smoothly and smoothly cut tiles may not work. The main principle. the thickness of the residual layer with any surface relief of the tile should be the same, otherwise chips are formed on the break.

Washing tiles at an angle of 45 degrees requires a special tile cutter that allows an adjustable slope relative to the platform on which the tile fragment is placed. The goal is to get a seamless (and without the use of overhead metal corners) convergence of both in the external and inner corner in the place where two walls came together. Not all manufacturers make such a cut of the side edge (side) of fragments, so it is better to take care of it yourself.

Method Surprised 50 Years Old Tiler! Remove Tiles Without Breaking

If we are talking about sawing at an angle of 45 degrees on the surface, then it is advisable not to break off a sawn fragment along the cut line, but to saw it with a saw machine, which can be made on the basis of a corner grinder fixed on a small platform. Cream of tiles from any material, including ceramics, is made using disks with diamond spraying.

It is not recommended to break beautiful tiles with improvised means. pliers, a forceps tile cutter, as well as cut it with a corner grinder using standard abrasive disks designed for sawing steel. In the first case, you will get an uneven breakup, which would still have to be leveled with a saw machine. In the second. the consumption of metal disks would be very large, since the corundum and fiberglass from which they are made are not intended for sawing ceramics and porcelain tiles.

You can try to cut off the tile, as well as to cut it with a corner grinder, but the plug.up tiles, however, plugs, nippers and simple forceps are unsuitable here.

Cutting tiles with a mechanized tool. dusty work. To prevent the formation of an excessive amount of dust that cannot be breathed, moisten the cut place with water. Motorized tiles are equipped with a water spraying system, in the case using an angular grinder, the master applies water independently. from a manual sprayer, periodically suspending the process of sawing.

adjustment, electric, tiles, water, cooling

In any case, without a respirator, it is not recommended to use a motorized tile. drying from heating during friction of the disk about the material, the tile immediately begins to give a certain amount of dust. Manual tile cutter may require wetting the glossy surface with oil (instead of water). along the cut line. This prevents the flight of high.speed fragments that strive to get into the eyes when the master used not completely closed glasses with a panoramic visor.

How the tile cutter is chosen the main criteria

To choose the tool suitable for performing work, it is recommended to pay attention to a number of some signs, such as power, cutting disk, length and depth of cutting. These are the main parameters that must be taken into account in order to eventually choose the most suitable tile cutting cutter to perform the planned work.

  • Power is the main parameter on which the ability of the tool depends. Equipment copes with sharp ceramic tiles, the power of which is up to 1 kW. If you need to cut granite or stone, then it is better to choose models with a large power of power up to 2 kW
  • The size of the cutting disk. this parameter determines the ability of the equipment to cut materials of different thicknesses. The larger the diameter of the cutting disk, the thicker the workpiece is capable of cutting a tile cutter. At the same time, it should also be borne in mind that the size of the disk is interconnected with the power
  • The length and depth of the cut. depends on the size of the device. The parameters on the depth of the cut and the length of the materials for sawing are indicated directly in the technical description to the corresponding model of the equipment

A significant role is also played by the manufacturer that produces tile cutters. Buying cheap Chinese devices for constant use is not rational, since they will not last a couple of months. Among the manufacturers of tile cutters, which are worthy of attention, include:

The choice of such expensive equipment needs a competent approach. After the purchase, you have to learn how to work as a tool, what the instruction will help. Even if everything is clear, it is recommended to deal with some recommendations for the use of cutting equipment before the first use.

It is interesting! Electric tiles with water cooling on which the engine is located below do not have clamps on the working surface, so the squeezing force and the quality of the cut depends on the hands of the master.

How the tiles are cut with an electric tile cutting step.step instructions and recommendations

To cut the tiles, you need not only to buy an electric tile cut, but also learn to work on it. To do this, you need to perform a number of the following actions:

  • Prepare and connect equipment
  • Put on protective uniforms. glasses, headphones, gloves
  • Mark the workpiece, which is subject to separation
  • Fix the tile on the table to prevent the occurrence of its vibration
  • You need to start cutting carefully and slowly
  • The disk should not be pressed on it, otherwise you can simply transmit, spoiling the facing material
  • After the cutting is finished, turn off the equipment, and only then take the material

Upon completion of work, it is necessary to remove the workplace. You can not leave a tile cut into a socket unattended, as a child can turn it on and get an injury.

It is interesting! For work, it is recommended to use high-quality discs, the cost of which is at least 200-300 hryvnias. The cost of the discs also depends on their diameters, but in order for it to serve for a long time, it should be used correctly.

The operation of the device is quite simple and uncomplicated, but some factors should still be taken into account in order to avoid the development of negative consequences. When cutting with a tile, the following recommendations are taken into account:

  • The passage must be made only in one direction. If you move the rotating disk in the opposite direction, this will lead to the formation of chips and other defects on the sawed material
  • If the work is carried out on a machine with the upper location of the engine, then it is necessary to manually move the disk. If it is a tile cutter with a lower engine, then when working you need to hold the tile with your hands. This method of cutting is less safe, so during the work you will need special caution and attentiveness
  • Prepare equipment for work. install a disk, pour water, connect equipment in a socket, and also fix the workpiece. It should be noted that not all models of electric cooling electric power cutters have a cooling system, which is implemented through the use of the pump

Working on an electric tile cutter is no more difficult than on manual, but at the same time you need skills. In order not to spoil the workpiece, it is recommended to practice on spoiled details.

How to cut tiles with a tile with water cooling?

Tile cutting is a serious process, so before starting work, it is recommended to get acquainted with some nuances. All electronic units that include a water circuit have a certain sequence of cutting facing materials.

The functional part of the water tile cutters is represented by a diamond circle. The use of such a cutting element allows you to accelerate quickly and with high accuracy perform quite large volumes of work. When cutting, it is necessary to remember that the facing product must be moved towards the disk.

Useful information! An important role is played by what material the tile is made of. The stronger the structure of the product, the more pressure it is necessary to produce it during cutting. Experts recommend gradually increasing the pressure of pressure during operation.

In order to avoid jamming of the cutting disk and minimize the percentage of vibration, it must be fixed on the table. The water accumulating in the tank during operation is gradually polluted, so it is necessary to change it in time.

It is best to put pressure on the processed product from both sides. This will exclude the likelihood of distortion and chips formation. In some cases, a diamond circle can jam. over, this does not depend on the cost of the unit and its quality.

During the cutting process, press on the tile with a certain effort, it will depend on its composition, thickness and density

And, of course, do not forget about elementary precautions while working with such a tool. Safety precautions takes into account the use of special glasses to protect the eyes, as well as headphones from noise.

How to cut with a tile cut at an angle: Recommendations

The processing of facing materials at right angles is not very difficult. problems and questions (especially for novice masters) are caused by cutting tiles diagonally. It is worth noting immediately that manual models are not adapted for such operations, so you need to use an electronic unit with a water circuit.

The change of angle in such devices is made by changing the position of the cutting head. Special screws are used to fix it. Depending on what angles of inclination can be used when working with tiles, all electric steamers are divided into three varieties:

  • cutting only at right angles (90 °);
  • allowing the tiles under two fixed corners (90 and 45 °);
  • operating in the range from 45 to 90 °.

The dimensions of the working plane allow you to cut the tiles of not only standard sizes (30×30 cm), but also products, the length and width of which reaches 1 m. A long table is one of the characteristic features of professional tile cutter. However, different models differ from each other and, above all, it is necessary to look at their work characteristics.

Almost all models of electrical tile cutter can perform cuts and porcelain tiles at an angle of up to 45 degrees, but for different materials you need to select your disk

With a diagonal cut of tiles, it is necessary to be very careful to exclude the likelihood of chips. Experts do not recommend very much pressure on the facing product when processing it.

Thus, there are several varieties of electronic tile cutters, each of which is selected depending on the purpose. When choosing this device, you should pay attention to its external elements. They should not have damage. And it is also recommended to study the passport of an electric tile cutter. Reviews about different models can be easily found on the Internet on specialized forums.

Peculiarities

Dewalt’s slappers, although present in a small assortment, are represented by very universal products that allow you to perform the most diverse types of work. Two available models are in different price ranges, which makes it possible for the consumer to choose the option that will be proportionate to the volume of work performed. It is also worth noting that these products are suitable for processing both tiles and some other materials: artificial and natural stone, as well as concrete.

A reliable and strong design allows you to make the workflow safer, and the setting system significantly simplifies the process of use. It is impossible not to notice that Dewalt decided to focus not on the number of products, but on their quality.

At the production stage, the company uses modern technologies that allow you to achieve high accuracy of processing materials.

Review of models

Dewalt DWC410 is an inexpensive model, the main advantages of which should be called simplicity of operation and reliability. This tool is well suited both for ordinary household work and for use in professional conditions. A rather powerful 1300 W electric motor allows you to have 13,000 rpm, due to which the speed of the cut of tiles makes it possible to perform a large amount of work. The method of use can be either dry and wet due to the presence of a special nozzle intended for water supply. The maximum sawing depth of 34 mm is carried out not only in one plane, but also at an angle of 45 °.

To carry out long.term work, a button for automatically turning on is provided. The diameter of the cutting discs is up to 110 mm, adjusting the angle of inclination and depth according to a simplified type, so the user does not need to use the key. The design was created in such a way as to not only reliably protect the mechanisms of the product, but also provide easy access to brushes. An important advantage of the DWC410 should be called small weight, which is only 3 kg, and therefore the carrying of the tool is very simple even in a construction site.

Dewalt D24000 is a more powerful electric tile cutting machine, which, thanks to its characteristics, saves a lot of time when working with a large amount of material. The principle of the device is quite simple, as it resembles the action of a disk saw, only the disk itself is equipped with a diamond coating. The water cooling system has adjustable double nozzles, which increase the efficiency and time of continuous operation. Unlike DWC410, the level of inclination can be changed in the range from 45 to 22.5 °.

Directors are built into the structural frame, due to which high incision of cutting is achieved. D24000 is safe and during its use leaves a minimum amount of dust. The diameter of the disk reaches 250 mm, engine power 1600 watts. A removable cutting trolley facilitates the cleaning of the tile cutter. On the back and side parts of the device, you can install water collectors.

Despite the weight of 32 kg, the movable part has a light move, and therefore it will not be difficult for the user to direct the saw after changing the level of inclination.

Tips and recommendations

Rating, characteristics and other important reviews of electrical tiles undoubtedly help to choose the best model. However, tips from experienced specialists and ordinary users will not be superfluous.

Expert advice will help you choose a good tile cutter

When choosing a model, it will not be superfluous to pay attention to the following capabilities of the tool:

  • convenience of adjustments and settings;
  • the presence of a scale with a detailed graduation;
  • good overview of the cut zone;
  • the presence of a guide laser or a special slot for the accuracy of the saw;
  • long network cord, comfortable handles, easily removed protective casing.

Professionals advise choosing models on which it is easier to change diamond circles. If this is a machine, then the bed should be folding. Well, if there are transport wheels.

Reviews of the owners of such a tool often help to choose an electric tile cutter. Before buying, it will not be superfluous to visit the forums of the corresponding topic. If the exhaustive answer was not found, you will have to rely on the honesty of consultants of the outlet.

The third year I have been using the professional model Messer M125. I purchased a tile cut through a lot of cost, but it helps out with large volumes of work. In addition, it is easier to deliver to construction facilities compared to the machine. The quality of the cut is good. Cooling cope with its duties.

I work in a construction company. Since tiles have to cut a lot, I use the Fubag Masterline machine. German quality is evident. The speed of work is high, accurate cut at any angle. I have not met the best equipment, at least at our construction site.

| Denial of responsibility | Contacts |RSS