How to refuel a stihl chainsaw

In most cases, when preparing fuel for the work of saw, they use 1:50 and 1:40 proportions for the work. This means that one part of the oil is added to 50 or 40 parts of gasoline. The calculations are subsequently performed: one l = one thousand ml, 1000/50 = 20 ml or 1000/40 = 20 5 ml, in other words, pour 20 ml into each liter of gasoline, and in the 2nd-20 5 ml of oil. If there is no annotation and you do not understand the proportions for the manufacture of consistency, then use subsequent tips:

  • 1st brand tool and oil. For example, for the Stihl chainsaw, the ratio of gasoline and STIHL oil will be the same as indicated on containers with butter, as a rule, this is 1:50.
  • In substances used for consistency, various brands. a proportion of 1:40 is selected.
  • There is one brand, but there is no info about the ratio of substances on the oil. they bred 1:40.
  • In the absence of all data on the saw and oil, the mixture is bred in a proportion of 1:40. The only thing you need to make sure that the oil is created for two.stroke engines.

To carry out the run-in the latest saw at the first 3 gas stations with fuel oil are added 20% more. In this case, the ratio of 1:50 will be 1:42, and the proportion 1:40 is converted at 1:33. Per liter of gasoline will need 20 four or 30 three ml of oil, respectively. Other countless events with the latest saw do not conduct. Manufacturers recommend working only at the highest revolutions always. After the instrument is running, use ordinary proportions 1:50 or 1:40. In some cases, the manufacturer of equipment also shows other ratios, for example, 1:25 or 1:32, they must be observed.

How to breed gasoline for a chainsaw

Consider how the mixture for the chainsaw is preparing. It is necessary to calculate the correct ratio of gasoline and oil for chainsaw. A fuel with a high octane indicator is taken for a chainsaw: AI-92 or AI-95.

To prepare the fuel mixture, it is necessary to add 30 g of oil by 1 liter of gasoline, which corresponds to the construction of the saw. The resulting fuel fluid is poured into the fuel compartment. Before breeding gasoline, you should get advice from service specialists who specialize in the repair of chainsaws.

In order for the saw to have a long service life, it is necessary to correctly prepare a gasoline mixture for which only AI-92 and AI-95 brands can be used. Fuel should not be ethyled, otherwise the internal combustion engine may break. You can not use an old product that has expired, because over time, fuel can change the octane number. The proportion of lubrication and fuel is strictly withstanding.

You should not save when choosing oil for chainsaws of the brand Husqvarna and others. The proportions must be observed due to the fact that excess oil can lead to growth of soot on the nodes of the chainsaw. Excess gasoline can provoke the occurrence of damage to the piston and DIS breakdown. So, 1 liter of fuel is mixed with 20-50 ml of oil. Husqvarna recommends add 100 ml of grease by 4 liters of gasoline. This proportion is suitable for saws with power up to 1.5 kW.

For structures with a power of more than 1.5 kW, an oil proportion 1:50 is used. That is, dilute gasoline as follows: add gasoline for a chainsaw in an amount of 5 liters per 100 ml of oil. Partner recommends diluting the fuel fluid in the following norms when refueling the chainsaws: 100 ml of grease is added by 3.3 liters of fuel.

When using supersynthetic oils, the indicators are 1: 100. That is, the fuel mixture for the chainsaw should be prepared according to the recipe: add 100 ml of lubricant per 1 l fuel. When choosing components, you need to use the information that is given in the instructions of any modification of the saw.

Consider which container you can mix fuel. The stores have canists with measuring divisions in which there are 2 holes: for fuel and for lubrication. Using such a canister, pour both ingredients, tighten the lids and mix the substances, tilting the canister in different directions.

Often, plastic bottles and other containers are used to mix ingredients. With plastic and glass, you should be careful. When mixing components, static electricity may appear. It is necessary to ensure that pebbles, sand or drops of water do not get into the fuel mixture. The fuel mixture must be mixed well. The prepared fuel mixture cannot be stored for more than a month, since the oxidation of materials may occur, and the composition of the mixture may change.

Breakdown of the motor, which was caused by fuel with an expired shelf life, is recognized in the services of non.warranty. At the same time, the cost of repairs can reach 80% of the price of a new structure.

After all the work using the chainsaws were over, you need to spent the remaining fuel, turn off the motor, remove the remnants of the mixture.

For the best operation of the device, it is necessary to make a mixture that will ensure uninterrupted operation of the motor, complete combustion of a gasoline mixture without soot, smoke or damage.

Fuel and lubricants

Petrol

Engine manufacturers recommend the use of high-octane gasoline of the AI-92, 95 brand. The use of fuel with various additives to increase the octane number is not allowed. During this time, the process of resounding and polymerization can take place in it, which negatively affects the operation of the engine.

We do not recommend consuming gas stored for more than 60 days

Most chainsaw engines provide for the use of ethyl gasoline. If you purchased a tool with a catalyst (the tank cover will be green) we recommend that unequilled brands of gasoline.

Important: you should not save and use gasoline with an octane number below 90. It is also not recommended to use gasoline with an octane number, higher for 95. This leads to premature wear of the piston group of the motor.

Oil

In the design of two.stroke engines with air cooling, a separate lubrication system is not provided structurally. Lubrication of moving parts occurs with oil available in the fuel mixture. Therefore, it is necessary to use only high.quality oils from trusted manufacturers.

Recommended oils for gas station refueling:

  • STIHL HP. designed specifically for chainsaw engines. It has proven itself under any weather conditions, provides ideal engine operation.
  • Husqvarna HP. oil from the famous manufacturer of garden technology. Special additives reduce the pale formation on the engine crankcase, which can occur due to the use of low-quality fuel.
  • Oleo-Mac Prosint 2T-multifunctional oil with synthetic esters. Protects the engine details from corrosion, reduces the wear of mechanisms and parts.
  • Champion Jaso FD. high.quality oil from a well.known company. Provides good protection of all moving engine parts;
  • Vitals Semisynthetic. all.season oil for budget models of chainsaws, intended for use at temperatures from.20 to 40C 0.

Important: the use of mineral, semi.synthetic and synthetic car oils is prohibited. They are intended for engines of a different type and do not have the necessary properties.

The choice of oil

Unlike four.stroke engines, STIHL 180 chainsaw oil is poured directly into the gas tank, having previously mixed with gasoline. It is recommended to pour the oil specified in the instructions for this model in the chainsaw.

In no case can you use oil intended for low.speed engines (boats, scooters, etc. D.).

It can significantly reduce the life of the motor, and if traces of such a substance in the cylinder-piston group are detected, the tool will be considered removed from the guarantee, t. e. will not be subject to warranty repair or exchange.

Synthetic and mineral oil oils for chainsaws STIHL are sold in bottles or cans of different containers: from 100 ml to 5 liters. Minerals have a lower cost, and semi.synthetic and synthetic provide complete combustion in the process of engine operation, t. e. lack of soot and a minimum of toxic compounds in the exhaust.

In addition, synthetic oils retain their qualities in a much wider temperature range, as well as contain special additives that are useful for engine operation: anti.orally, detergents, cannibal, etc. D.

You can choose motor oil for your tasks depending on the model of the saw and the frequency of its use: the oil consumption during the operation of the device is low, and given the shelf life of semi.synthetic and mineral lubricants, there is a risk of simply not having time to use even a liter bottle to the end.

So with small alleged volumes of work, you can not buy a voluminous canister, but limit yourself to a bottle. The expiration date does not have only mineral lubricants of Stihl.

Varieties of oils

When deciding which oil chain to use, first of all, you need to be guided by the recommendations of the tool manufacturer. Of course, the best lubricant will be the original oil. In case of its absence, you can use ordinary car lubricant.

What oil is used for the chainsaw depends on its future operation, and the classification of grease is on the composition. It is divided into groups:

Synthetic brands can withstand the temperature minus 40 degrees. Semi-synthetic products operate in the average temperature range (-30-25 degrees). Sometimes manufacturers to improve the characteristics of the lubricant add special additives to its composition. They change the properties of the oil, giving the opportunity to choose a lubricant corresponding to the future operating conditions. Depending on the type of engine engine, oil consumption occurs. In a four.stroke motor, the combustion chamber has a special design. Therefore, there are no traces of soot in it. To achieve a similar effect in a two.stroke motor, you have to fill in a special oil

It is very important that the fuel corresponds to the lubricant

Lubrication for the aid of the chainsaw

To increase the duration of the stars, as well as reduce friction, the manufacturer sets a needle bearing. For its periodic lubrication, oil for the stihl chainsaw is used.

STIHL 180 chainsaw What oil is poured

What oil is used to lubricate the chain?

Chainsaws. A popular tool for those who are dealing with numerous household chores. They can be used for different purposes. collect firewood, cut dry branches. But in order for the device to last as long as possible, you must correctly take care of it, correctly selecting different connections. A special role is played by oil chains, which is selected depending on the principles of the tool and its characteristics.

What to count?

Lubricate chain saws should pay due attention you should choose a special oil that does not hurt the oil pump

In addition, this will ensure high.quality operation of a self.smoking system. The chain requires proper storage, that is, immersion in oil, and in case of wear, do not try. It is easier to replace it. What is the best oil for chain chains so that it is safe and meets all the requirements?

Types and composition

The choice of specific oil follows depending on where and how the chainsaw works and how. Mineral formations are suitable for the summer and warm season. In other cases, it is better to use synthetic or semi.synthetic oils. If you need to lubricate the chain, there is no need to use waste oils, which will lead to clogging the fuel system, and then to serious breakdowns of the tool.

The chain saw oil must be thoroughly cleaned so that the lubricant is applied correctly and accurately applied. If you use low.quality compounds, then there will be no contact between the saw elements and tires, sparks will appear, and then the moving parts of the saw will wear out.

How to choose?

Each chainsaw has a two.stroke carburetor engine and two tanks: one is filled with gasoline, in the second. oil. When choosing a composition for lubrication, zoning plays an important role. It should be minimal. Another important indicator is resistance to low temperatures: the oil should not freeze under a strong minus, which will ensure the quality of the entire tool.

For lubrication, it is recommended to use adhesive oil for chain chains containing special substances, thanks to which the composition is well gripped with a chain. High.quality oil will remain on the chain when it rotates, and the chain itself will be more reliable in operation.

Read adjusting the carburetor of the chainsaw Husqvarna 236 with your own hands

Another important indicator of lubrication is the density: if the composition is liquid, it will be consumed in large quantities

In order to avoid harm to the environment when using a chainsaw, it is important to use vegetable oil. His waste will decompose in a natural environment

What oil for chain chainsaws to choose, because modern manufacturers offer a wide range of options? Of specialized manufacturers, you can mention brands such as Divinol, Bio-Kettenol, Ravenol, Vegoil, Mobile, Castrol, Shell. Let’s look at the features of their products in more detail.

Divinol

This brand proposes to evaluate the lubricant for high.quality chains, which has good adhesive and lubricating ability, so the lubricant is performed efficiently, and the loops and chain loops are reliably protected from wear. The optimal combination of viscosity and temperature characteristics is a guarantee that this oil can be used at any time of the year and at any temperature.

Divinol offers various oil chain oils

What is the benefit of them? Zweitaktoel FF draws attention to economical consumption, connection to any fuel, preventing aging of the fuel mixture and excellent protection against corrosion. In addition, this oil can be used in any temperature mode

Divinol Kettenol and Divinol Kettenol Bio can be used to lubricate the chainsaw and chainsaw. With the help of these compounds, you can reliably protect the links of the chain and hinges from wear, while guaranteeing an economical oil consumption. High.quality organic oils of this brand provide excellent lubricants and adhesive properties, so their use is not only simple, but also environmentally friendly.

MS180 A couple of moments about which liquids should be called in a chainsaw. Always follow for.

The choice of oil

Unlike four.stroke engines, STIHL 180 chainsaw oil is poured directly into the gas tank, having previously mixed with gasoline. It is recommended to pour the oil specified in the instructions for this model in the chainsaw.

In no case can you use oil intended for low.speed engines (boats, scooters, etc. D.).

It can significantly reduce the life of the motor, and if traces of such a substance in the cylinder-piston group are detected, the tool will be considered removed from the guarantee, t. e. will not be subject to warranty repair or exchange.

Synthetic and mineral oil oils for chainsaws STIHL are sold in bottles or cans of different containers: from 100 ml to 5 liters. Minerals have a lower cost, and semi.synthetic and synthetic provide complete combustion in the process of engine operation, t. e. lack of soot and a minimum of toxic compounds in the exhaust.

In addition, synthetic oils retain their qualities in a much wider temperature range, as well as contain special additives that are useful for engine operation: anti.orally, detergents, cannibal, etc. D.

You can choose motor oil for your tasks depending on the model of the saw and the frequency of its use: the oil consumption during the operation of the device is low, and given the shelf life of semi.synthetic and mineral lubricants, there is a risk of simply not having time to use even a liter bottle to the end.

So with small alleged volumes of work, you can not buy a voluminous canister, but limit yourself to a bottle. The expiration date does not have only mineral lubricants of Stihl.

How to breed

STIHL fuel mixture is prepared by mixing high.octane gasoline and oil for two.stroke engines. The proportion of oil and gasoline for the chainsaw is as follows: if the power of the unit does not exceed 1.5 kW, then the ratio will be 1:40 (t. e. 25 ml of oil per liter of gasoline), and with a power above this value. 1:50 (20 ml per 1 l).

It is necessary to dilute gasoline for the Stihl chainsaw in a separate canister, in no case, without filling the saw in the gas tank of the saw separately. There are no oil pump and the possibility of installing it in these engines, so only the finished fuel is poured into the tank. There are even special canists with two necks on sale to make it more convenient to dilute the mixture, but you can add oil to gasoline for a chainsaw and in an ordinary canister.

The proportions of the gas station refueling are best observed as accurately as possible: the excess oil will create soot on candles and pistons and provoke detonation when fuel combustion. This can reduce the engine operating resource. In addition, the user of the saw in this case is forced to inhale exhaust gases with unburned fractions. At the same time, an excess of gasoline can damage the pistons due to insufficient lubrication.

To dilute gasoline, it is recommended to use special tools. this is a measured container for gasoline, a lubricant dispenser, a syringe, a canister for the preparation of the mixture and a watering can for refueling the sawdaulu a tank. All these auxiliary accessories are sold in official stores and at Stihl dealers.

Some people’s craftsmen are advised to use a plastic bottle in case of lack of special measuring accessories: a full cover (from the same bottle) is poured into a half-liter container filled with gasoline. The output is an approximate ratio of 1:50.

The amount of the mixture for refueling is best calculated in advance based on the estimated volume of work and the declared consumption of this engine. The volume of the tank in most chainsaws is about 0.5 liters, a 2 kW engine will spend about 1.2 liters per hour of operation (more accurate descriptions of the saw can be seen in the instructions). Thus, it makes no sense to prepare a mixture in volumes exceeding 3 in a row.

Before the start of preparing the mixture, it is recommended to carefully clean and dry the neck of the canistra and the area around it to avoid the hit of extraneous impurities: dust, water, etc. D. The same is done with the tank before pouring fuel: the lid and neck are cleaned of dust and adhering dirt so that it does not get into the gas tank, and then into the engine.

Proportion for chainsaw Friendship

The genealogy for the chainsaw of friendship began in 1953 by the development at the ZMKB “Progress”. The production of goods was entrusted to two enterprises. the Siberian Instrument.making and Perm Engineering Plants. The mass production of a mechanized product has begun, which is still in the trend of the day, since the unit has been systematized.

The engines use fuel low octane numbers. The unit shows the highest productivity when filling the AI-76 and AI-80 gas stamps in ICE of gasoline.

It is recommended to dilute gasoline and oil according to the following algorithm:

Take 2 clean containers dried from moisture with volume marks. Then dilute the fuel with two.stroke oil in a ratio of 1:50. That is, fuel is diluted with 20 milligrams of oil.

Stihl chainsaw oil

To begin with, it would be nice to mention that all Stihl chainsaws are created with quite small sizes, but with their dimensions, they have a very impressive power. Thanks to this feature, Stihl chainsaws are in great demand. Despite the high quality, durability of the chainsaw depends on the use of the correct lubricant and fuel. The first problematic question that the owners of this technique face is: what kind of oil and fuel to choose for their chainsaw? In this article you will learn about which oil is better to use for your chainsaw, and about which fuel is better to fill in your “baby”.

Choose oil for chainsaw stihl

The first thing you should know about is that almost all Stihl chainsaws are equipped with a carburetor two.stroke engine. There are also two separate tank in them: the first for oil, and the second for gasoline.

The first, and most importantly, remember that a simple oil is poured in the model of domestic production, which is usually poured into the tanks of motorcycles, and their proportion should be no more than 1 to 25. As for the chainsaws produced abroad, they will need to buy branded oils, the proportion for which is 1 to 40. Of course, you can try to pour oil for domestic saws in an imported saw, in which case, the power of your tool may noticeably fall. The best advice that can be given when buying oil for such a technique is to contact the manual to use your tool.

STIHL MS 170 | How to fill up chain oil and fuel mixture | Instruction

If you are the owner of the Stihl brand chainsaw or just want to buy one of the models presented, we offer an overview of the proprietary chainsaw of STIHL MS 180.

A good choice will be synthetic oil for two-stroke air cooling engines of the API-TB and API-TC class. Having come to the store, ask the seller about the presence of such brands as Stihl, Husqvarna, Hahotek, Champion, Alco, etc. In no case do not greedy on the ingredients, it is better to spend money on a quality product than then spend a lot of money on repairs.

Choosing gasoline for the chainsaw of Stihl

When choosing gasoline for your chainsaw, you should pay attention to, of course, the quality of the gasoline itself and, its octane number. It is best to take gasoline with octane AI92. You can try AI95, but too many questions arise about its quality. If you doubt the quality of AI95, then AI92 will be the best choice for you.

We do not advise you to use gasoline, which has long been in any container for a long time, whether it be a canister, tank or something else. For the fuel mixture, only fresh gasoline must be used, otherwise, it can lose all its useful qualities: octane number, etc. If you still use not fresh gasoline, then your chainsaw will work at incomplete power. In the case of a rude breakdown, due to the use of such fuel, you will have to spend a lot of money on its repair, since such a case does not apply to warranty, and you will better purchase a new tool.

Making the fuel mixture of gasoline and oil

Before proceeding with the creation of the fuel mixture for the STIHL manufacturer’s chainsaw, pay your attention to the manual from the manufacturer. Why do you need to do this? The thing is that with insufficient oil content in gasoline, the cylinder and the piston will heat up hard, which will occur in the bullying, which will lead to a breakdown of the CPG, and as a result-to expensive repair.

In order to prepare a high.quality fuel mixture, you need to mix oil and gasoline in a clearly verified proportion. If the oils are more than necessary, then this can lead to the appearance of soot on pistons and candles. If you overdo it a little with gasoline, then expect the ambulance of your engine. For example, on average, one liter of gasoline should be mixed with 20-50 ml. oils. For a train, it is recommended to pour 4 liters. gasoline. 100 ml. oils. In this ratio, a mixture for chainsaws is prepared up to 1.5 kW. If the power is more than 1.5 kW, 100 ml should be poured. Oils for 5 liters. gasoline. But these are all approximate calculations, always use the proportions indicated in the manual to your saw, if you yourself do not understand how much and what is needed. But do not really believe the numbers indicated on the oil label.

You also need to know how to handle the already prepared mixture. Here are a few useful tips for you:

  • Do not leave the finished mixture in reserve;
  • Use it within a month;
  • Do not leave the mixture under the sun and in the open container;
  • Do not allow water and dust to get there. otherwise it will lead to a breakdown of the carburetor.

What to breed the fuel mixture?

Imagine, you have already decided on the exact proportions, the next question that will interest you is: “What to mix gasoline and oil?“Well, what can I say, you can use a regular canister, syringe and much more. But today there are much more practical options: bottles and canister with a dispenser with special containers for gasoline and oil. The use of these tools will significantly save you time and simplify the preparation for the launch of the chainsaw.

In what proportions to mix liquids?

Each manufacturer of the chainsaws determines its proportions for obtaining a gasoline-oil mixture and indicates this in a technical passport that is attached to the tool when buying. Gasoline proportions with oil for chainsaws of domestic production are most often recommended in a ratio of 1:15 or 1:20. In order to calculate how much oil is required per liter of gasoline, you need 1000 /15 = 65 ml and 1000 /20 = 50 ml. In the first case, 65 are added to each liter of gasoline, and in the second. 50 ml of oil. For imported technology, the proportion is slightly different.

For the Husgvarna chainsaw, the engine power of which is 2 kW, the manufacturer advises using the ratio of 1:50, t. e. 20 ml of oil is added to each liter of gasoline. Chinese.made saws are required to pour 40 ml of oil per liter of gasoline with a ratio of 1:25. It should be remembered that with excess oil in gasoline, the soot increases, the cylinder clogs, piston rings are damaged and compression decreases. With a lack of oil. the engine overheats and the productivity of the tool is sharply reduced. When the documentation is lost and you do not know how to mix gasoline with oil for a chainsaw, you can contact the service center for the necessary information.

How much to store gasoline with butter

The combustible mixture is stored a maximum of 10 days from the moment of mixing. The short shelf life is due to the basis of lubrication. The base of the lubricant is the mineral formula. Thus, in 7-10 days, gasoline dissolves the formula, which causes complete unsuitability to further operation.

Also, after the work, it is necessary to give time to the motor for the full production of the mixture. It is advisable to store the drained carburetor. this prevents the hit of the spoiled liquid inside the combustion chamber.

Stihl chainsaw oil

To begin with, it would be nice to mention that all Stihl chainsaws are created with quite small sizes, but with their dimensions, they have a very impressive power. Thanks to this feature, Stihl chainsaws are in great demand.

Despite the high quality, durability of the chainsaw depends on the use of the correct lubricant and fuel. The first problematic question that the owners of this technique face is: what kind of oil and fuel to choose for their chainsaw? In this article you will learn about which oil is better to use for your chainsaw, and about which fuel is better to fill in your “baby”.

Choose oil for chainsaw stihl

The first thing you should know about is that almost all Stihl chainsaws are equipped with a carburetor two.stroke engine. There are also two separate tank in them: the first for oil, and the second for gasoline.

The first, and most importantly, remember that a simple oil is poured in the model of domestic production, which is usually poured into the tanks of motorcycles, and their proportion should be no more than 1 to 25. As for the chainsaws produced abroad, they will need to buy branded oils, the proportion for which is 1 to 40. Of course, you can try to pour oil for domestic saws in an imported saw, in which case, the power of your tool may noticeably fall. The best advice that can be given when buying oil for such a technique is to contact the manual to use your tool.

A good choice will be synthetic oil for two-stroke air cooling engines of the API-TB and API-TC class. Having come to the store, ask the seller about the presence of such brands as Stihl, Husqvarna, Hahotek, Champion, Alco, etc. In no case do not greedy on the ingredients, it is better to spend money on a quality product than then spend a lot of money on repairs.

Choosing gasoline for the chainsaw of Stihl

When choosing gasoline for your chainsaw, you should pay attention to, of course, the quality of the gasoline itself and, its octane number. It is best to take gasoline with octane AI92

You can try AI95, but too many questions arise about its quality. If you doubt the quality of AI95, then AI92 will be the best choice for you.

We do not advise you to use gasoline, which has long been in any container for a long time, whether it be a canister, tank or something else. For the fuel mixture, only fresh gasoline must be used, otherwise, it can lose all its useful qualities: octane number, etc. If you still use not fresh gasoline, then your chainsaw will work at incomplete power. In the case of a rude breakdown, due to the use of such fuel, you will have to spend a lot of money on its repair, since such a case does not apply to warranty, and you will better purchase a new tool.

Making the fuel mixture of gasoline and oil

Before proceeding with the creation of the fuel mixture for the STIHL manufacturer’s chainsaw, pay your attention to the manual from the manufacturer. Why do you need to do this? The thing is that with insufficient oil content in gasoline, the cylinder and the piston will heat up hard, which will occur in the bullying, which will lead to a breakdown of the CPG, and as a result-to expensive repair

In order to prepare a high.quality fuel mixture, you need to mix oil and gasoline in a clearly verified proportion. If the oils are more than necessary, then this can lead to the appearance of soot on pistons and candles. If you overdo it a little with gasoline, then expect the ambulance of your engine. For example, on average, one liter of gasoline should be mixed with 20-50 ml. oils. For a train, it is recommended to pour 4 liters. gasoline. 100 ml. oils. In this ratio, a mixture for chainsaws is prepared up to 1.5 kW. If the power is more than 1.5 kW, 100 ml should be poured. Oils for 5 liters. gasoline. But these are all approximate calculations, always use the proportions indicated in the manual to your saw, if you yourself do not understand how much and what is needed. But do not really believe the numbers indicated on the oil label.

Correct ratios and cooking for popular manufacturers

Different manufacturers recommend different proportions for their chainsaws

Their observance is followed with attention. The lack of lubrication leads to the failure of the internal combustion engine

An excess. to the loss of power, smoke, the formation of soot with all the above problems.

How to dilute for StiHL, in particular for the MS 180 model

The manufacturer recommends for motors of its chainsaws, including the STIHL 180 ms HP Ultra oil in a proportion of 1:50. It provides the highest capacity, service life and cleanliness of the ICE. It is also recommended to use motor oils in cans with the inscription STIHL

It is important to purchase original, but not counterfeit products here

In the case of a mix of oil and gasoline, not so. The mixture can be stored up to 2 years. After long storage, the container must be shaken to mix the possible precipitate.

Motomix is ​​a ready.made fuel mixture from Stihl, very comfortable when there is no time or the opportunity to mix liquids in place

How to dilute for a Husqvarna saw

The manufacturer in the operating instructions recommends using special oil for Husqvarna. It is adapted to the engines of this manufacturer, provides a long service life and quality work. Poured in a ratio of 1:50.

It is allowed to use oils for two.stroke air.cooled ICE from other manufacturers. If a proportion is not indicated on the canister, the manufacturer of the chainsaw of Husqvarna recommends pouring an increased dose in the proportion of 1:33.

Thus, for 1 liter of gasoline for the chainsaw, Husqvarna is flooded:

  • 20 ml (in the colloquiality of grams) Husqvarna oil (1:50).
  • 20 ml of other acceptable oil, if 1:50 is indicated on the canister.
  • 30 ml per 1 liter of gasoline, 1:33, if another proportion is not indicated.

Husqvarna does not recommend storing the cooked mixture longer than 30 days. Before pouring a defended mixture, it is necessary to shake.

The ratio of oil and gasoline for Partner chainsaws, in particular Partner 350

For its saws, including model 350, Partner recommends using Talon branded oil in a ratio of 1:40, that is, 1 part for 40 parts of gasoline.

In order to calculate the need for 1 liter (1000 ml), 1000 should be divided into 40. Result. 25 ml per 1 liter (1000 ml) of gasoline.

In the instructions of this manufacturer there is no information about the permissible replacement of the recommended Talon oil with others. In practice, oils for two.stroke engines with air cooling and other brands are used. In this case, the proportions are recommended already by oil manufacturers and are indicated on the canister.

Pay attention to the canister, the inscription 1:40, this once again confirms that each oil has its own recommended mixing proportions with gasoline

How to breed gasoline with oil huter

The manufacturer Huter does not release any one brand for his chainsaws for his chainsaw. There are recommendations for a general type. JASO FC classification oil or others: API TV, API TS, JASO FB for two.stroke ICE of air cooling.

composition, mixture, chainsaw, stihl, gasoline

In the operating instructions, Huter himself does not call proportions, but indicates that the mixture is compiled in the proportion indicated by the manufacturer of the oil.

For example, if the canister indicates 1:50. 20 ml per 1 liter of gasoline is poured. If indicated 1:40. 25 ml per 1 liter.

How much oil per liter of gasoline is poured into champion chainsaws

For its chainsaws, Champion recommends using Champion oil for two.stroke high.speed air.cooled ICE. Proportion 1:50, that is, for 1 liter of gasoline 20 ml.

In addition to the CHAMPION proprietary, the use of oils for the same engines of other brands is allowed. over, it must comply with the standards of the API TV/C or JASO FC/D, which should be indicated on the label of the canister.

How many grams of oil per 1 liter of gasoline are needed for makita saws

Makita, recommends for its gasoline saws, Makita oil for high.performance two.stroke engines

Makita pays attention to environmental protection. Oils of this brand have a minimum of polluting exhaust

Recommended proportions 1:50, 1 liter is poured 20 ml. It is allowed to replace with analogues of other brands, provided that they meet the international standard TS-3. At the same time, it is recommended to add more oil in the instructions, 1:40, for 1 liter 25 ml.

composition, mixture, chainsaw, stihl, gasoline

Preparation of fuel mixture for a chainsaw

Petrol

Gasoline should be with an octane number no less than AI92. You can also fill in AI95, but its quality at our gas station leaves much to be desired, so if you are not sure of the 95th, it is better to take gasoline AI92 gasoline to dilute gasoline into a chainsaw. You should not take gasoline in the same way for a long time in the canister, tank or any other capacity. Gasoline for the preparation of the fuel mixture in the chainsaw should be fresh, otherwise it loses its properties, in particular the octane number, and even if you run the chainsaw on such fuel, it will not give out full power. And the saddest thing in this case is that the failure of the chainsaw due to poor.quality fuel is considered a non.warranty occasion and leads to expensive repairs. Sometimes it’s easier to buy a new chainsaw than to repair it after such a breakdown!

Read more about gasoline for chainsaws here:

Oil

Oil for 2-stroke engines according to the American Petroleum Institute (API) classification, the American Oil Institute has an API-TB class, there are also API-TC oil oils, but they are designed to work with less loads than most of the chainsups we common. If we take the classification class of Japan Automobile Standards Organization (JASO) Japanese standardization organization in the field of automotive industry, then focus on JASO-FB and JASO FD classes (see.Table 1 below.).Not in any case do not use oil for four.stroke engines! Remember that in a two.stroke engine the oil should be completely burned, which means it is better to take synthetic oil, since it gives less smoke and burning residues. And if you pour oil for four.stroke engines in your chainsaw, which will not burn completely and as a result of the fog, then you will fail. The best thing to be guided by when choosing oil for a chainsaw is an instruction for her.

Proportions

When preparing a fuel mixture of gasoline and oil for a chainsaw, be sure to see the manufacturer’s recommendations. Why is it so important to observe these recommended proportions? With a small amount of oil in gasoline, the cylinder and the piston will occur and the bulletin will occur, and this is the exit of the CPG and repair. If there is a lot of oils in gasoline, then this is a dozen and the failure again.Each manufacturer has its own recommendations on proportions (see.Table 2 below). Try not to store the finished mixture longer than a month. Do not store it under direct sunlight and openly. Avoid water and dust, this will lead to the failure of the carburetor, since the fuel filter is often not able to completely clean the fuel.

Since they often come from search engines at the request of the same “how much oil is pouring 1.2.5 liters of gasoline”, then I add another table under which you can find out how much oil to gasoline according to the accepted proportions. The proportions can be viewed in table 2 or, more precisely in the instructions for your chainsaw.

Fuel mixture dilution devices

Of course you can use a canister, a syringe or a measured bottle, but there are more convenient options. It is worth noting that, for example, STIHL oils are produced in 2 types of packaging- with a dispenser and without. With a small price difference, a bottle with a dispenser greatly facilitates the process of making the mixture. There are also many different cans with a dispenser, with departments for oil and gasoline separately. All these devices reduce the period of preparation for the launch and work of the chainsaw.

STIHL canister with oil and gasoline departments

This canister has two departments for storing oil and gasoline separately. A capacity of gasoline with a volume of 5 liters, and the oil container has a volume of 3 liters. Often, many owners of a benzo.tool with two.stroke engines in this canister carry oil in the same department, and in the other a ready.made fuel mixture.

Husqvarna canister with oil and fuel mixture departments.

Husqvarn canisters have a feature: the oil container can be disconnected from the main and used separately.

How to breed properly?

The figures of breeding proportions are not in vain given with such accuracy. That is, it is not said that “take about such and such an amount of oil”. Do not observe the exact proportion by eye, so you have to use something that will allow you to measure the exact amount of oil and gasoline.

Complete with some inexpensive chainsaws are usually a measured tank with risks. As a rule, it has several scales for different proportions. Or one, if the manufacturer implies that this tank will only be used with a saw with which it comes in the kit. There should be two horizontal risks on this scale. The lower one shows the level to which gasoline needs to be poured. Upper. level to which the mixture should reach after adding oil to gasoline.

How to Mix Oil and Gas

For more accurate measurement of oil, you can use a medical syringe. Preferably at least 20 ml.

In general, pour gasoline into a measured container, add the desired amount of oil measured with a syringe and shake.

The preparation of the mixture must be done in a separate container, and not directly in the tank of the chainsaw. Otherwise, the oil, not having time to dilute with gasoline, can get into the carburetor, which will complicate the factory, up to the need to remove the carburetor and its cleaning.

| Denial of responsibility | Contacts |RSS