How a coil is placed on a trimmer for grass

A universal fishing line for a trimmer is often used, the diameter of which is 2 mm. You can choose the diameter suitable for the mower in the following ways:

See the information about the thickness of the fishing line in the instructions attached to the trimmer. Pay attention to the squash itself. Sometimes information is applied on it about possible fishing line diameters. Another option is to try to insert the cord into the output

If it easily passes into it, then the selected fishing diameter is suitable for use.

You can choose a cord thread by type of engine. If the fishing line for the trimmer is too thick, then the resistance to rotation will increase. The engine in this case will overheat and will soon fail. Useful recommendations:

  • For an electric device with an engine of less than 500 in, a thread of 1.3 mm thick is suitable. If this was not found, then you can use a fishing line for a trimmer by 1.6 mm. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
  • The gasoline trimmer for grass has a shaft mower. For the bent version, the cord for 2 mm is often used. If the shaft is straight, then set the thread 2.4–2.5 or 3 mm. The thickest fishing line for a trimmer is installed on powerful devices. From 1.3 kW.

Pay attention to the type of cross section of the cordry thread. Some popular options:

  • The most common fishing lines with a round section. They mow fresh herbs well, but they cope worse with shrubs, drows.
  • Twisted (spiral) cord does not differ in high strength, but well suitable for thin young grass.
  • The jagged thread with sharp edges is ideal for a large weeds in a neglected area.
  • You can mow the lawn in a rectangular, starry or square fishing line for a trimmer for grass, but they are not very durable.
  • The most durable is a two.Component cord with an internal core and a round section.

Keep in mind that it is impossible to use wire, metal strings and cables, as well as an ordinary fishing thread. The device will be dangerous for both the user and for others. So the cable or similar products will gradually begin to shut down, as a result, their ends will be reacted, and small pieces will scatter at high speed.

Types of heads for trimmers

A trimmer is a tool that is used to combat vegetation in a summer cottage or household territory. Grassing and hay harvesting for cattle implies the use of benzo or motorcycle. The heads of different types are installed on trimmers for the grass, through which the grass and other vegetation occurs.

RYOBI: 25.4cc Easy Start Curved Shaft Line Trimmer Assembly Use

The heads are classified into three main types that differ not only in design, but even in price, the method of operation and service life. Consider all types of heads for trimmers, as well as their technical features.

Popular models

When choosing which coil is better for your trimmer for grass, check out the list of heads that have already earned many good reviews from users.

Bosh K103

This head is universal. Its weight is 300g. It is mainly used in the trimmers “Hyunda” and “Makita”. The fishing line for the trimmer of this coil is especially strong and reliable, moderate consumption is noted even with intensive use. Screwing is carried out automatically. The base (core) is metal and breaks extremely rare. The head has a height of 67mm. A flat cap is used here, which serves for a long time. Soft and young grass mowed beautifully. There are rare reviews that the cover is still erased, but they are extremely rare. The coating is made of durable plastic.

Coil for EFCO3060

Available in price and good quality head. The fishing system system is semi.Automatic, therefore, the most convenient. The diameter of the mount 6.6mm. The quality of the material from which the fishing line for the trimmer is made good, strong. In the work, the coil has established itself as reliable, its use is enough for a decent number of motorcycles. Thanks to the thickness, a fishing line for a trimmer is able to cope with any, even densely growing grass. Adapter in the coil of the threaded connection. A special cup protects the entire head from damage well. This model is suitable for so many models, in t.H. Hyunde, Intertula and T.D.

Flymo 15

Coil (head) with semi.Automatic wrapping of universal fishing line. The kit includes a rather thin cup, in connection with which the fishing line can be increased. However, this drawback is more than compensated by excellent mowing. The head is installed at 74mm mark, and this is a good result. Only a thin fishing line for a trimmer is used in the coil. The core is completely metal. It is mainly used for garden modifications of trimmers from various manufacturers.

EFCO 8100

Perhaps this is the best universal coil for a trimmer for grass. The set includes a special adapter for installation on many models. The type of wrapping is fully automatic. The mount has a diameter of 6.2m, and the height of the coil is as much as 76 mm. A fishing line for a trimmer with a volume of 1.3 mm is used. Fastening is carried out by a screw method. The protective casing is very compact, made of special shock.Resistant plastic, but the cup is completely absent. First of all, this model is intended for soft young grass, with perennial high grass it is likely to not cope.

See also  Mount for grass trimmer on the wall with their own hands

Instructions

In order to change the fishing line for the trimmer, it is necessary to extract the old one (if it was).

The coil is part of the design of the trimmer for the grass, which is located inside the head of the motorcosa, drum or bobbin. Depending on the manufacturers of the head can be different. But this article discusses only Patriot, although their mechanism is used by many other companies.

Now you need to understand how to properly remove the head from a trimmer for grass and how to get a drum out of it.

Eliminate the malfunctions of the automatic coil with a fishing rod for a lawn mower

Instructions on how to promote a hand head on a trimmer is described below.

  • First of all, you need to clean the head of dirt and adhering grass if it is contaminated. To do this, you need to raise a motorcycle head up and, holding the casing, remove a special protective cover dressed on the drum.
  • The next step needs to remove the reel from the drum. The coil is easily removed even with one hand, because it is not fixed inside the drum.
  • The drum itself is fixed in the trimmer with a bolt. This bolt must be unscrewed, after which you can easily pull out the drum. To do this carefully, you should support the drum with a coil, while twist the screw counterclockwise.
  • Now you can pull the coil out. As mentioned above, it is not fixed in anything except a hook with a metal shaft, so it does not need to be torn off with force. Neatly, in a circular movement you should pull the coil from the drum.
  • Now it remains to extract an old fishing line for a trimmer and follow the following instructions.

Installation of the coil and drum in its former place is performed according to the opposite algorithm.

Before the process of refueling the fishing line, it is worth making sure that the thread suitable for a trimmer was bought. In the case when the thread is not suitable, the fuel or energy consumption increases, as well as the load on the motor motor.

In order to replace the thread itself directly, you need to prepare a piece of thread of the required size. Most often, this requires about 4 m fishing line. A specific figure will depend on the parameters of the thread, for example, its thickness, as well as on the parameters of the coil itself. If it is not possible to accurately determine the length, it can be done as follows: insert and wind the thread to such a state that the coil is completely charged (the level of the fishing line will be compared with protrusions in the sides of the coil). It is necessary to ensure that the fishing line for the trimmer sits in the coil exactly.

Do not forget that the thick thread will be shorter than thin.

The instructions for refueling the fishing line in the coil is described below.

The prepared thread must be taken and turned in half. It should be ensured that one edge is longer than the other by 0.1-0.15 m. Now you need to take the ends in different hands. The one that is smaller must be pulled to more, so that it becomes 2 times shorter. When bending, the indentation should be maintained at 0.15m. Find the slot inside the coil partition. Carefully prick the loop that turned out earlier in this slot. To continue work, it is necessary to determine the direction of winding the thread in the coil. To do this, just examine the coil. There should be an arrow on it. If the gunner could not be found, it is quite possible that there is a written designation. An example is given in the photo below. It is necessary to inspect the head of the coil. It has a direction indicator. However, this is the direction of the coil movement. To get the direction of winding, you need to wind in the opposite direction. Now you need to season the reel with a fishing line

It is worth noting that there are special guide grooves inside the coil. When wrapping a thread, you need to follow these grooves, otherwise you can damage a trimmer for grass

At this stage, you need to charge the coil very carefully. When the user winds up almost the entire thread, you should take the short end (do not forget about the protrusion of 0.15m) and stretch it into the hole located in the coil wall. Now you need to repeat this action similarly with another end (on the other hand). Put the coil itself in the coil head, before that, extinguishing a fishing line for a trimmer through the holes inside the drum. Now is the time to return the drum to your place. After that, you need to take with both hands by the ends of the fishing line and pull them to the sides. Then you need to put the lid in place (here you can safely make efforts until a characteristic click is heard). Remained to perform “cosmetic work”. You need to see if the thread has come out too long. You can start a trimmer for the grass and check in practice whether everything is comfortable. If the thread came out a little long, you can cut it with scissors.

What can be used instead of fishing line

Many users of trimmers are wondering: how to replace the cord, by default used in this kind of devices? Unsafe experiments begin to carry out, installing metal or copper wire, metal cables or strings in a mowing head, as well as a regular fishing fishing line for a trimmer. If you install a metal cable instead of fishing line, then a trimmer for grass turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during the operation of the unit, the steel cable will be gradually shut up, its ends are gradually released, and small pieces of wire will fly in different directions at high speed. A similar one happens when using steel or copper wire, only with the difference that the torn pieces will be larger and can cause a significant injury. And if you accidentally hook your or someone’s leg, working as an unit with a steel cable (wire), then a strong and deep section of the fabrics, and in some cases, amputation of the fingers are provided with you. The manufacturer is not in vain for these purposes, nylon uses, since it is quite light and durable, and when separating he does not fly away and cannot cause injury. It is possible to use a fishing fishing line for a trimmer in a trimmer instead of a standard one, of course, but this will add unnecessary trouble, because it quickly wears out, breaks, mows slowly and does not fit for cutting hard grass. In addition, during the work, a lot of time is lost to replace the broken tool more than once. In practice, the installation of a regular fishing line is justified if the user is going to mow grass near the fence, especially if he is from a rabid grid. In this case, in order to protect the standard and sometimes expensive cord from wear, it changes to a fishing fishing line for a trimmer, which is not a pity. Usually, in order to change the cord to a fishing line for a trimmer, it must be selected the greatest thickness-2-3 mm.

See also  How to promote a head from a trimmer for grass. How to remove the coil and replace the fishing line for the trimmer

Trimmer coil (spool) holds a fishing line for a trimmer for mowing grass. On some devices, the cord is wound with turns, ready.Made segments are attached to others. In the first case, the length of the fishing line is 1-8 m, and in some models up to 15 m, in the second-several tens of centimeters for each fragment. The coil itself is the central part of the trimmer’s working head for grass, but these terms are often used as synonyms.

A spool with a fishing line wound on it is enclosed in a case, which includes two parts: the base and cover that are connected using latches. The cord is threaded through the holes in the case, which can be 2 or more, for example, to use a fishing line for a trimmer of different diameters without replacing the coil. There is a spring between the bobbin and the lid, thanks to which the fishing line for the trimmer comes out or stretches out to replace the wore end. The design is screwed to the trimmer bar for grass with a bolt.

The main malfunctions and their elimination

If you run the saw the first time, there may be several reasons. Most often, the problem is related to the spark plug:

  • Wear of the electrode or damage to the ceramic insulator;
  • Loose fit of a removable cap (if any);
  • The sparking along the ceramic winding, a sign of which is the brown residue on the outer shell;
  • Cracks in the cap of candles (saw with such a problem will continue to work, but can hurt the user when touching).

If there were no problems with the candle, it is recommended to inspect the wires coming from the coil. They can be broken or have other mechanical damage. Ruptures of the wires inside the isolation are possible, therefore, sometimes these disorders cannot be detected by visual examination.

The cause of the breakdown may be shutdown. It is easy to check them. To do this, disconnect the wires from the module, and then check the ignition. If after disconnecting the spark appears, then the switch must be replaced.

Signs of ignition malfunction:

  • The chainsaw is started, but it works unevenly (troit), often sneezes and shoots;
  • The power of the chainsaw fell noticeably;
  • With a sharp press on the accelerator, failures are observed in the operation of the engine;
  • The chainsaw is poorly started on cold, very troit until it warms up;
  • Fuel consumption has increased significantly;

If such flaws appeared in your chainsaw, then it is time to conduct diagnostics, adjustment, and possibly repairing the ignition system.

How to choose a head for a trimmer for grass?

For a mowing head to show high efficiency, the owner of the motorcycles will need to be correctly approached by its choice. In this case, you need to take into account a number of factors:

  • Work experience. If a novice gardener is engaged in a purchase, then it is best to purchase an automatic spool. Semi.Automatic and manual bobbins are best suited for use by more experienced gardeners;
  • Material. The reliability of the coil depends on it. Metal models are considered the most durable, but they weigh much more standard plastic devices. When working with a metal spool, the motor motorcycles lends itself to increased load, so you need to buy them only to work with a powerful benzo.Leggos;
  • The diameter of the fishing line used. For medium.Power trimmers, coils are used, which can be seasoned with fishing line with a thickness of not more than 1.6 mm. On motorcycles with a capacity of above 2.5 liters. With. You can install devices that can be refined with a cutting cord with a thickness of more than 2 mm.

An important role in choosing a coil is also played by the simplicity of its device. For beginners, sparse are best suited, which consist of a minimum number of details. Experienced gardeners can use heads, the design of which includes more elements.

Classification of coils for a trimmer for grass

Since trimmers for grass are produced in a wide variety, the spills on them also have several types. They are classified according to various signs: if the user is necessary in the process of serving the string, according to the material of manufacture, by design (for semi.Automatic models) and by the method of winding the cord per coil.

See also  How to wind a trimmer line onto a STIHL brushcutter

For feeding the cord

By the method of serving fishing line, trimmer heads are divided into:

A manual coil appeared before other options. Its design is simple and reliable, but you need to unwind the fishing line for the trimmer to replace the used. To do this, you have to change the trimmer motor for the grass and stretch both ends to the suitable length.

The semi.Automatic coil allows you to lengthen the cord without turning off the engine, right during operation. To do this, you need to press the head to the solid surface so that the mechanism that releases the ends of the forest works. The centrifugal force unwinds the cord, and the person again raises the head of the device above the ground, when the length is sufficient. The whole procedure takes a matter of seconds.

coil, placed, trimmer, grass

The automatic coil works when the braid lowers the engine speed (the gas mower has such an opportunity, but not an ethletric trimmer for grass) or starts it. The fishing line for the trimmer is advanced until the user again increases the moment.

According to the material

According to the material from which the working heads are produced, plastic and metal coils are distinguished. For the manufacture of the former, shockproof plastic is used, for the latter. Aluminum and steel.

By design

Spilles of semi-automatic coils are one- or two-section. On a single.Section cord is wound evenly, the turns are distributed along one groove. Two.Sectional bobbins are divided in half, so that the fishing line for a trimmer is laid in two grooves, and when lengthening the working part, each end is fraught out of its compartment. For such a spool, the uniformity of the turns is not important.

By type of winding

By the method of winding fishing line on the bobbin, there are the following types of coils:

To refuel a collapsible bobbin, you will have to turn off the trimmer for the grass, remove the cutting head, get the coil from it, remove the remnants of the worn fishing line and manually wrap up a new one. Then collect everything in the reverse sequence and continue the mowing.

A quick.Shot reel is not required to remove the cord for wrapping. It is enough to draw the ends of the new forest in the holes on the coil body, wind it on the bobbin in the right amount and cut off the excess length or cut the loop.

How To Tips for Easy Restring of Weed Eater with 2 strings

The choice of fishing line

In order for the dressing of the fishing line to the trimmer head to be successful, it is important not to fail to choose the consumer material. The thicker the cord you refuel, the more thick and hard grass it can cut

A universal fishing line for a trimmer is often used, the diameter of which is 2 mm. You can choose the diameter suitable for the mower in the following ways:

See the information about the thickness of the fishing line in the instructions attached to the trimmer. Pay attention to the squash itself. Sometimes information is applied on it about possible fishing line diameters. Another option is to try to insert the cord into the output

If it easily passes into it, then the selected fishing diameter is suitable for use.

A coil for a trimmer for grass can choose a cord thread by type of engine. If the fishing line for the trimmer is too thick, then the resistance to rotation will increase. The engine in this case will overheat and will soon fail. Useful recommendations:

  • For an electric device with an engine of less than 500 in, a thread of 1.3 mm thick is suitable. If this was not found, then you can use a fishing line for a trimmer by 1.6 mm. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
  • The gasoline trimmer for grass has a shaft mower. For the bent version, the cord for 2 mm is often used. If the shaft is straight, then set the thread 2.4–2.5 or 3 mm. The thickest fishing line for a trimmer is installed on powerful devices. From 1.3 kW.

Pay attention to the type of cross section of the cordry thread. Some popular options:

  • The most common fishing lines with a round section. They mow fresh herbs well, but they cope worse with shrubs, drows.
  • Twisted (spiral) cord does not differ in high strength, but well suitable for thin young grass.
  • The jagged thread with sharp edges is ideal for a large weeds in a neglected area.
  • You can mow the lawn in a rectangular, starry or square fishing line for a trimmer for grass, but they are not very durable.
  • The most durable is a two.Component cord with an internal core and a round section.

Types of fishing line for a trimmer for grass, keep in mind that it is impossible to use wire, metal strings and cables, as well as an ordinary fishing thread instead. The device will be dangerous for both the user and for others. So the cable or similar products will gradually begin to shut down, as a result, their ends will be reacted, and small pieces will scatter at high speed.

| Denial of responsibility | Contacts |RSS