How many teeth on the STIHL 361 chain?

Characteristics and description: Stihl MS 361 16 chainsaw (11352000529)

Manufacturer: Stihl (Stihl)
The number of chain links (ZV.): 60
Chain step: 3/8 “
The thickness of the chain: 1.6 mm.
Weight, kg.): 5.6
  • Chainsaw models;
  • Barcode;
  • The factory number of the device (the number has nine positions and is assigned separately for each saw). The presence of this number is mandatory. Without it, repairs in the service center are impossible!

many, teeth, stihl, manual

Stihl chainsaw device 180

The household chainsaw of the Stihl MS 180 is equipped with a high-quality branded internal combustion engine, from the factory producing the work-up to work in difficult weather conditions. The single.Cylinder model of the model successfully withstands prolonged high loads without increasing the number of fuel consumed, and the forged piston group is not amenable to corrosion and the formation of burrs. Engine cooling. Improved by means of absorbed air masses. For more convenient operation, the Stihl 180 chainsaw is equipped with a factory vibration suppression system, and to reduce noise during operation. A branded muffler.

The instrument clutch device includes a proprietary leading star. It withstands long loads and does not slip with a sharp increase in speed. This increases the efficiency of the STIHL chain saw when sawing dry thick logs.

To facilitate the launch of the cold factory engine, the Stihl MS 180 chainsaw is equipped with a decompression valve designed for manual pumping of fuel.

The working organs of the garden tool is an enhanced metal tire on which the chain is stretched. For a more accurate adjustment of the tension of the saw headset in the configuration of the STIHL model, a branded frontal device is provided. For protecting the operator from the broken circuit, the shields for the front and back, as well as the chain capture. To lubricate the saw set in the device device, an EMATIC is a proprietary lubrication system with a durable oil pump. Additionally, the manufacturer included in the set of garden tools to be a gear stop for a more accurate cutting of logs.

The stihl ms 180 chainsaw is released by simplicity in use, which was achieved thanks to the governing manufacturer of the governing organs. The button for turning on the motor, gas lever, the factory plastic label of the starter and the position of the standard throttle air damper are located in the rear of the model. In front, the lever of the built.In inertial brake is installed.

Stihl chainsaw device 180

One of the most famous models for the production of the STIHL brand. Modification of MS 180. Has a well.Balanced high.Precision structure. All internal elements and working mechanisms of the benzo tool are planted as tightly and stable as possible, so that sawdust and small garbage do not seep into the housing. When working with this popular household chainsaw, there are no backlash, which makes its operation not only effective, but also pleasant.

Like other representatives of the lineup of this manufacturer, the proprietary chainsaw of the STIHL MS 180 is pre.Equipped with a high.Quality power unit. The engine of the benzo tool was developed using its own technologies of the German company, which made it economical and even more productive than the gas.Tools of other famous companies.

ICE of the STIHL proprietary chainsaw consists of a reliable crankshaft with reduced weight and increased resistance to friction. The piston group of the motor is made using hot forging technology, due to which its operating time has increased by almost 2 times. A cylinder, with a useful volume of 31.8 cm3, is previously covered with a continuous layer of chrome alloy that protects it from corrosion.

The stihl ms 180 chainsaw is originally equipped with a high.Precision fuel system. Its factory base includes a durable Japanese carburetor equipped with spring.Loaded screws to independently adjust the node. The standard equipment of the carburetor includes the STIHL branded compensator, designed to continuously maintain constant power of the internal combustion engine and stabilize the fuel consumption in any condition of the air filter. The presence of this element increases the cycles between the cleaning of the filter and retains the composition of exhaust gases within the permissible environmental norms.

See also  How much does STIHL saw a saw. DIY main malfunctions and repair

For the possibility of lightweight launch of the Stihl MS 180 chainsaw, it is previously equipped with a manual starter mechanism developed using Elasto Start proprietary technology. It provides for the presence of a shock absorber under the starting handle, which effectively extinguishes severe vibrations, reducing the pressure of the operator’s hands. All built.In spare parts of the trigger mechanism are made of durable and fairly light forged metals. Details withstand significant heating and are not amenable to corrosion.

STIHL 180 chainsaws are pre.Equipped with a branded stretch element located in the right lower part of the standard body. Free non.Clock access to it allows you to adjust the chain or quickly dismantle the cutting headset in order to install special nozzles.

The factory system of lubrication of the stihl chainsaw consists of an oil pump, the performance of which can be adjusted depending on the needs of the operator. The pump quickly pumps oil from a separate translucent tank and transfers it to the grooves, which equip the proprietary tire. The oil pump is located under the protective cover of the case, having removed which the operator gets the opportunity to make its independent repair.

The basic package of the model is preliminarily included in a wear.Resistant clutch, which is based on an all.Metal leading asterisk. It is installed on a forged drum, simplified access to which allows you to quickly disassemble the tool for planned service.

For timely ignition of the fuel mixture in the design of the STIHL MS 180 proprietary model, the ignition system is responsible. Its basic composition includes a coil with the primary and secondary winding installed on it, as well as a candle that transfers the spark to the cylinder.

For a uniform saw, a toothed emphasis is included. Its presence allows the operator to sprinkle even the hardest wood, leaving a neat fishing line for a cutting trimmer.

Design features

Stihl-180 chainsaws, reviews of which should certainly be read before visiting the store, have subsequent components: a casing, a decompression valve, a noise lord, a device created for tensioning the chain, a tension wheel, a hand protection device that is located in front. In addition to the rest, the tool has a back handle and a tubular handle, also a combined lever for switching. The unit is provided by a lever for the supply of fuel, also a latch, a fuel tank traffic jam, a gear emphasis, a saw chain, also a chain star. Makes a even more comfortable chain of the saw chain and brake, also an adjusting screw. Stihl-180 chainsaws, reviews of which are quite often only positive, involve a periodic service. We are talking about certain elements, in the middle of which you should highlight the asterisk, chain and tire, cylinder, spark plugs, carburetor, also a chain lubrication system. It should be noted and tanks for fuel and oil, levers and screws.

many, teeth, stihl, manual

The main difficulty is to determine the size of a round file, because the work performed by a flat tool is much easier. For teeth of STIHL saw, the upper end of the file should protrude to the surface of the working corner by 20% of its height. However, remember the step of the saw chain, which is usually taken at a speed of 0.325 inch.

The next step in the choice is to clarify the length of the round file. It depends on its size. GOST 1465 sets five numbers of this tool, but only number 4 or 5 is suitable as a file for sharpening the chainsaws. Files have a working length of 200 mm, and 250 mm and 300 mm. As the length increases, the amplitude of the movements of the workers increases, therefore, the quality of the file direction along the tooth, respectively increases. Therefore, a longer file for sharpening is better.

See also  Budget circular saw which one to choose. Versatility

How to pull the chain on the chainsaw correctly?

Famous brands produce garden tools, taking into account the chain on the chainsaw, even an inexperienced beginner was able to. To do this, in the device of almost every model, a side tensioner is provided, which allows how to put a chain on a chainsaw and tighten the already installed headset. Thanks to this mechanism, a chain stretch on a chainsaw can be performed with your own hands. In most cases, Pil manufacturers provide free access to the tensioner, due to which the replacement of the leading roller and other parts of the mechanism is greatly simplified.

Installation of the chain on a chainsaw should be carried out only when the motor and tire of the garden tool have completely cooled down. If you ignore this requirement, then a cold sawing element on a hot tire can be deformed. Over, this occurs quite often even in cases where a winning chain for a chainsaw is installed.

To correctly put the chain on the chainsaw, you need to follow the following procedure:

  • First you need to check whether the lock is turned on of the arbitrary inclusion of the garden tool. The saw owner will also need to turn on the inertial brake in advance;
  • Next, you need to dismantle the protective plastic cover located on the right side of the saw, and turn the screws;
  • Then you will need to determine which side to put the chain on the chainsaw. Manufacturers advise installing the headset so that the cutter located in the upper part of the installed tire is precisely directed directly towards the rotation of the chain;
  • After that, you need to put on protective gloves made of dense material and begin to slowly rotate the headset on the tire;
  • If the operator finds that the pile element used, it will need to be tightened. To do this, rotate the tensioner until the part for sawing is pulled;
  • Then you need to weaken the screws that are in the standard configuration designed for fastening the factory tire;
  • Next, you need to insert the tire and wrap the screws.

#STIHLsecrets When To Sharpen A Chain Of A Chainsaw | STIHL GB

At the end, it remains to once again check the tension of the saw element. With proper installation, the chain should not sag and, at the same time, should not be stretched too much. It is best that when pressing it with the index finger of the hand, the part sags by about 0.5 cm.

Main characteristics

Stihl-180 chainsaws, which you must study reviews about even before buying the tool, have an engine capacity of 1500 watts. Professionals are often interested in the volume of the cylinder, which is 31.8 cubic meters. Cm. The volume of the fuel tank in liters is 0.27. Tire length can be from 300 to 350 millimeters. Working with the device is very convenient, since it has a slight weight limited to 3.9 kg. You may be interested in the step of the chain, which is 3/8 inches.

Among the additional functions, you can distinguish the automatic lubrication of the chain, locking the power button and the presence of a lubricant reservoir, the power of which is 0.26 liters. When choosing a chainsaw, it is necessary to pay attention to additional options, namely: compensator, a chain lubrication system, as well as an anti.Vibration system. All these additions are available in the described model.

The manufacturer of STIHL has a good set of even the most inexpensive products. The gasoline engine of any model is reliable and has a sufficient volume for the declared power. Components have proven themselves in the world market:

  • Patented chain mechanism. The fast tension system of the chain allows you to tighten the chain with one hand.
  • Manual fuel pump allows you to easily start the saw into the work even after prolonged downtime. One click and you can start sawing.
  • Anti.Vibration system. It’s no secret that resonance can cause a number of health problems. The company took care of its users. Chainsaws are collected in such a way that they are able to extinguish harmful vibrations.
  • Quickstop. Instant brake of the chain stops the saw if the front stop for the hands is affected or there was a sharp return.
See also  How to saw plexiglass at home

How to Sharpen Chainsaw Chain. Ozito Tool Tips [PXCCSSS-018]

All this has been making the STIHL brand the most popular and sold product since 1971.

MS 250 C-BE

Suitable for long.Term use. There is a starting device Ergostart. The weight of the chain without a chain is quite small (only 4.9 kg), and performance is as much as 3.1 liters.With. This is enough for comfortable work with trees up to 30cm in girth. Characteristics:

MS 230 C-BE

The gasoline engine is less productive (2 kW) than MS 250. Therefore, the unit sounds quieter. Optimum wood thickness for saws. Up to 30 cm. Technical data:

The saw is good for home use: dissolve firewood, trim the trees, remove excess wooden buildings and adjust the beam of various lengths to a single value.

MS 211 C-BE

A medium.Power unit with a sufficient engine volume will help in daily household chores. Reviews talk about convenience and ease of use. The pluses are undeniable:

  • Extremely low vibration;
  • Reduced fuel consumption. Saving 20 %;
  • Air filter of two.Stroke cleaning by 70 % reduces the harm of exhaust gases.

MS 193 C-E

Perhaps the easiest chainsaw. A small engine volume helps to make firewood comfortably and solve other household problems with ease. Specifications:

Easy in the hand has an undeniable advantage, so the price of MS 193 C-E is slightly higher than its analogues.

MS 181 C-BE

Like MS 211 C-BE, this saw has a low level of vibration and noise. A good engine significantly saves fuel and takes care of the environment. Technicals:

Ergostart launch easily and comfortably launches the motor even after prolonged downtime (for example, after winter). Corporate equipment makes it possible to play the house and garden work.

Main characteristics

Stihl-180 chainsaws, which you must study reviews about even before buying the tool, have an engine capacity of 1500 watts. Professionals are often interested in the volume of the cylinder, which is 31.8 cubic meters. Cm. The volume of the fuel tank in liters is 0.27. Tire length can be from 300 to 350 millimeters. Working with the device is very convenient, since it has a slight weight limited to 3.9 kg. You may be interested in the step of the chain, which is 3/8 inches.

Among the additional functions, you can distinguish the automatic lubrication of the chain, locking the power button and the presence of a lubricant reservoir, the power of which is 0.26 liters. When choosing a chainsaw, it is necessary to pay attention to additional options, namely: compensator, a chain lubrication system, as well as an anti.Vibration system. All these additions are available in the described model.

Which tire is suitable for Stihl 180 and which one can be put?

What tires are placed? On STIHL MS 180, tires from 12 to 16 inches or from 30 to 40 centimeters with a groove width of 1.3 mm are placed.

The wood tires of 12-16 inches (30-40 Washing Machine) with a shank A074: 140SDEA074 14 ″, 140SXEA074 14 ″, 160SDEA074 16 ″, 160SXEA074 16 ″ are suitable. This is analogues of the original Stihl tire.

Which tire is better? You decide. The quality of the analogue is definitely not inferior to the original. It is definitely worth trying both options to understand what is better suited for you and specifically your use of a saw.

Which tire to choose? It all depends on your tasks. If you need a light and compact saw for sawing garden trees and branches or tourist chainsaws, then a tire of 12 ″ is suitable. If a universal saw is required. Fourteen”. If you plan to saw thick logs, large volumes of firewood or engage in longitudinal sawing, it is better to pay attention to 16 ″ guides.

many, teeth, stihl, manual

| Denial of responsibility | Contacts |RSS