A pedorator drill: how to insert, remove, fix

With the advent of concrete reinforced structures, external and internal repairs cannot be performed without a penetrator. A large number of models of different firms are presented on the market, these are Bosch, Makita, Sturm, Bison, Vorthe, Dexter, Interskol, Caliber, Metabo, Union. Despite the variety, the main nodes and mechanisms work almost the same. The process of reinstalling the working element is also similar. Before inserting the drill into the peorator, you need to be able to get it correctly.

A pedulator is a universal tool that has great opportunities. There is a pneumatic device inside it, a pushing piston that comes into contact with a boy. The latter makes the equipment make reciprocating movements. As a result of the nozzles, any surface is destroyed. The presence of a function of the impact allows the tool to make holes in solid materials.

Its purpose depends on the built.In modes: drilling, d some and drilling. There is a toggle switch to switch the modes.

Manufacturers produce models different in weight:

Power and shock force depend on the size.

About nozzles

There are several types of drills and other nozzles for the pedorator:

  • Standard direct drills. Are needed to drill holes in brick, concrete or in stone.
  • Crings. Are needed to create not very deep, but wide holes. For distribution boxes for electrical wiring and other things. It is better to use crows with diamond tips in concrete.
  • Chisel. Can be used to dismantle tiles or other similar works. The tip of the drill is not hardened, you will have to sharpen it periodically.
  • Peaks. Often used to create holes for pipes.
  • Boers in the form of blades. To create channels for electrical wiring.

The main part of the nozzle is the shank. It is he who is inserted into the infantry cartridge. It is made of alloy steel and has high strength. The shank is marked, indicating the type of nozzle.

The working part is made of special steels for prolonged contact with especially hard non.Metallic materials: concrete, stone.

The form depends on what the nozzle is used for:

  • Screws. Are needed to create deep holes of different diameters.
  • Boers with a small slope of the grooves of a spiral. It is better to use for a large number of holes of small depths. Does not require much effort during labor.
  • Boers with a large angle of inclination of a spiral grooves can be recommended for high.Speed work in order to make a small number of sufficiently deep holes.

If the nozzle is stuck

Like any tool, the peorator of even the highest quality can jam. When performing work, this becomes a problem that has several options and reasons.

Firstly, when the drill stuck in a removable cartridge, and secondly, if the nozzle jammed in the penetrator itself.

Когда проблема в самом зажиме инструмента или съемной головке, то достаточно просто залить немного жидкости типа WD-40 в патрон и немного подождать. The composition will relax the grip of the clamping device and the drill can be easily obtained.

There are times when there are no special mixtures and car shops at hand. The output may be ordinary kerosene. It is also poured, and, having waited for 10 minutes, try to free the nozzle. At the same time, light tapping on the clip and small staggering of the drill are acceptable. After completing the procedure, the clamp must be thoroughly cleaned and greased.

The cause of the malfunction happens in the poor quality of the drill itself. If a cheaper and soft alloy of metal was used in the manufacture, then the nozzle can damage the peorator during operation.

Correct this problem can be in several ways. The first thing you need to try is to squeeze the drill in a vise and, holding the tool in your hands, shake the nozzle and pull it over yourself. If the deformation is not very serious, then the nozzle will be able to pull out.

The second option provides for double fixation with a vice. A pencil on one side, and the drill on the other. Then take a small hammer and beat along the borax towards the exit from the clamp. During such an operation, you can use WD-40.

When not a single method helps, you can try to remove the details of the cartridge and turn the drill in the opposite direction about 90 degrees. However, this technique can completely ruin the details of the clamping device.

Seized Drill Driver Freed Up. Makita DHP458. Jammed Chuck Gearbox

But if this option does not work, it is better not to try to disassemble the device. It is better to give such a peorator to the workshop to competent specialists.

It should be noted that in order to minimize such breakdowns, it is better to choose high.Quality nozzles of leading brands. As a rule, such investments pay off the long time of the tool.

The nozzle can get stuck not only in the mechanism of the unit, but also in the wall during operation. In this case, a drill or a drill can be tried to release by turning on the return move (reverse) on the device.

See also  Fortune corner grinder is what is the difference. How to change bearings

If such a method does not work, then the nozzle is released from the clamp, insert another, and, drilling the wall around the stuck tip, remove it. If the drill broke during operation, then its residues are removed from the clamp, and a piece stuck in the wall is drilled or simply trimmed with a grinder at the same level with the working surface.

How to insert a drill

On the ashorator itself there is also a quick.And.Packed mechanism. Reliable fastening of the drill in it is provided with fixation using special balls, which, when closed, are tightly included in the grooves on the lower part of the drill.

In order to fix the necessary nozzle, whether it is a drill or crown, you need:

  • Take the lower part of the cartridge down (towards the pedorator);
  • Holding it in this position, insert the right nozzle;
  • Let go of the cartridge.

If the balls are not entered in the grooves and the nozzle is staggering, then it is necessary to crank it until the structure is completely closed.

And to insert the drill into the peorator using an adapter, first a removable cartridge is fixed, which has a mount with grooves for the tool. Then the drill is installed directly. To pull out a drill or drill, you need to perform all the above actions again.

Here I would like to note that any manipulations for the installation and removal of a drill or other nozzles are preceded by a check of the working condition of the peorator mechanism. To do this, the unit must be included in the network and, having set the necessary operating mode, click on the start button. If the unit does not make unusual sounds and at the same time does not feel the extraneous smells of Gary or burned plastic, then the tool is ready to work.
change, drill, perforator, stuck

A pedorator drill: how to insert, remove, fix

With the advent of concrete reinforced structures, external and internal repairs cannot be performed without a penetrator. A large number of models of different firms are presented on the market, these are Bosch, Makita, Sturm, Bison, Vorthe, Dexter, Interskol, Caliber, Metabo, Union. Despite the variety, the main nodes and mechanisms work almost the same. The process of reinstalling the working element is also similar. Before inserting the drill into the peorator, you need to be able to get it correctly.

  • What is a peorator
  • Equipment of the penetrator
  • Installation of a drill in a peorator
  • How to remove a drill with a good cartridge
  • What to do if the drill does not move
  • How to get a drill from a damaged cartridge
  • What to do if the drill breaks
  • Is it possible to insert a conventional drill from a drill into the peorator
  • Conclusion

What is a peorator

A pedulator is a universal tool that has great opportunities. There is a pneumatic device inside it, a pushing piston that comes into contact with a boy. The latter makes the equipment make reciprocating movements. As a result of the nozzles, any surface is destroyed. The presence of a function of the impact allows the tool to make holes in solid materials.

Its purpose depends on the built.In modes: drilling, d some and drilling. There is a toggle switch to switch the modes.

change, drill, perforator, stuck

Manufacturers produce models different in weight:

Power and shock force depend on the size.

The device of the penetrator

Как вставить сверло в пеоратор (How to change hammer drill bits (SDS))?

Equipment of the penetrator

Most often it is used to work with:

Rarely. With wood. A variety of materials involves the presence of a large number of nozzles (working body):

All of them are designed to perform different works. Drown in the surfaces make neat holes of the desired diameter and depth.

Products that are designed for work on such solid material as concrete are made using carbide plates. They are attacked on the cutting part. But in the process of application they wear out.

How to sharpen the drill on concrete for a peorator? Sharpowing can be performed on the corundum sharpener circle. Which is installed on the appropriate equipment. The drill must be hidden so that the worn cutting edges become straight, and the place in which they intersect, as if coincided with the axis of rotation of the penetrator. Pay attention to the angle of sharpening of two cutting edges. With the unevenness of this parameter, the edge, in which the angle of sharpening is large, will be loaded stronger. As a result, the peorator will quickly fail.

Boers are designed to break through high.Strength materials. The tool with a drill nozzle simultaneously drills, performs vibrating actions or blows. Such work is necessary when installing a socket. Когда на аппарат установлены зубило или лопатка он работает как отбойный молоток.

The type of attachment for all nozzles, except for drills, is suitable only for a peorator, because it has a mount in the shape of grooves and a landing tail under it. You can fix a conventional drill from a drill in the ashorator, you need a removable cartridge (adapter). It is 2 types: cam. A special key is used to fix the cam clamp. It is inserted into the thread on the outer perimeter and rotated. At this time, the zangia mechanism. Which is installed inside the cartridge, depending on the direction in which the key moves, is compressed or unclenched.

A quick.Packed cartridge is driven by applying a slight effort with the hand. The drill hole will open if you press down on the cartridge.

See also  How to tighten a drill without a key. Is it possible to correctly tighten the threaded compounds of the GBC without a dynamometric key

There is also a small elongated design that allows you to lengthen the drill. Thanks to the extension cord, you can make deeper through holes in different materials. When drilling with it, you should carefully adjust the cutting modes.

Installation of a drill in a peorator

The tool itself also has a fast.Packed mechanism. The drill in it is securely fixed with the help of special balls, closing them tightly into the grooves that are located on the lower part of the drill. The installation procedure looks easy. To fix the crown or drill nozzle, the lower part of the cartridge is taken towards the penetrator (down). Keeping it in this position, set the necessary equipment and release the cartridge. It happens that the balls are not included in the grooves, and the result of the nozzle moves, you need to crank it until the structure completely closes.

If the drill must be inserted into the peorator using the adapter, then first you need to install and fix the removable cartridge with grooves for mounting for the tool, and then the drill itself.

Before inserting the drill into the Bosch peorator or remove, they must check in what condition the tool is located. Then they turn it on, set the desired mode, press the start button. You can start work if there is no smell of burning plastic or burning, there are no incomprehensible sounds.

Beginning of work

Before starting work, you need to make sure what mode the tool is in. Within one minute, he must stay at idle. Be sure to check the work of the gearbox so that vibrations, extra noise or sounds do not come from it. Also, smoke or smell resembling burning isolation should not appear.

For drilling, it is necessary to install the drill to the place where the hole will be made and only then press the power button. When working with the peorator, do not press too much on the surface. Modern peorators have the property of turning on/off. This property of the tool can provide the main work with a decrease in speed. Thanks to this regime, the hole will be made in an precisely defined place and the drill will not go to the side.

When drilling metal or wood, you should not turn on the stroke mechanism mode, this can lead to a breakdown of the device. There are peorators in which an automatic shutdown mechanism is installed when choosing an incorrect option. During construction work to drill concrete, you can use the stroke mode. To free the hole from the dust, it is necessary to periodically remove part of the drill and return it to its place.

Possible malfunctions of the cartridge and their elimination

In the process of work, the operator may face some difficulties that need to be corrected immediately so that more serious problems do not arise. In order to independently repair the peorator (for example, Hammer brands), you need to know the external manifestations of faults.

change, drill, perforator, stuck

The most common problem is that the drill is poorly fixed and flies out of the nest while working. This usually happens with prolonged operation of the tool.

The only reason causing such a malfunction is the wear of the cartridge. To eliminate the malfunction, it must be disassembled. In most cases, the balls that are installed inside are subjected to deformation, the production appears on them. Also, the problem can be in a fixing spring that has sagged significantly.

Important! You cannot fix these nodes, so you should replace them, and install the cartridge back.

Sometimes there is a situation when the cartridge is not attached to the device itself. In this case, it is necessary to check the mounting of the cartridge case, which is most likely worn due to prolonged work. There is a node at the end of the raster sleeve, and is a stop ring. With a breakdown, the fixation will be broken, and if the shocks occur, the ring will fly.

To eliminate the breakdown, it is necessary to replace the locking ring. This is done as quickly as possible, and there is no need to use additional devices. The master will need only a regular flat screwdriver.

The sequence of extracting a drill from a penetrator

To get a drill from a pedorator (dester or other company), you need to adhere to the next leadership:

  • First, see which cartridge is on the device. If you need to attach a drill that is held on a two.Button element to the pedorator, you just need to switch the device into a reverse mode. The lower coupling must be held with one hand, and the other is twisted the upper.
  • If a single.Button mount is used, then the nozzle can be unscrewed with one hand. The drill holds the autofixer.

The operation is not complicated and with any type of mount will take less than a minute. But there may be problems with jamming, in this case you will have to make more efforts.

Instructions on how to fix the drill in the ashorator is not required. You just need to do everything in the reverse order.

Work instructions, operation and repair

A hand.Made electric tool has gained great popularity in recent years. One of the most popular is the peorator. It is used in any production and in domestic conditions.

The correct use of this tool will not only extend its service life, but also save on consumables. The pediatric drills differ from those that are used in drones, which means that their method of attachment will be different. How to insert a drill into a peorator, consider below.

See also  How to make a hole in plastic without a drill

What is a peorator

With the ubiquitous use of the peorator, construction and repair work were greatly simplified. Indeed, in cases in which the drilling of holes in concrete, brick, asphalt is required, this device is indispensable. Wherever drilling with a blow is required. In addition, it is used to perform tasks characteristic of a drill, although the infantry cartridge differs.

This tool has three standard functions:

Another difference between a pouorator and a drill is that it has great power. It starts at 700 watts and reaches 3 kW.

The nozzles used

The list of works performed by the peorator is great:

To perform these tasks, various nozzles are used, made of durable materials.

For drilling holes in concrete or brick, there are drilling stamps with high.Strength steel with winning tips. For their fixation in the cartridge there are several varieties of shanks:

  • SDS Plus. This variety is the most common. It is used for drills with a diameter of 4-26 mm.
  • SDS Max. The tailings of this type have a longer groove. They are used in heavy tools of high power. The diameter of these drills is over 26 mm. The length of such drills is from 25 cm to 1.2 m.
  • SDS Quick. This is a rare variety of shanks. They are used in Bosch peorators. How to insert a drill with a similar shank into a regular tool? To do this, you need to change the cartridge.

On the tail of the tail, all the nozzles are identical. The working part differs depending on the function:

  • Boers are used to drill holes. The difference in the tips will depend on the hardness of the material, which is supposed to be drilled.
  • Crowns are used to cut a large diameter. For example, under an outlet or for a factory in a water pipe room.
  • Peaks, shoulder blades, chisels turn the peorator into a jack of a hammer. With their help, you can break partitions, punch large holes, lay grooves in the walls for laying an electric cable.

Cartridges used by the tool

How to insert a drill into a peorator? To quickly install the nozzle and its change, the SDS cartridge was invented. This mechanism was developed in the 30s of the last century. To fix the drill in the device, just insert it, slightly turning it to feel the grooves and snap. The SDS mechanism combines balls with the grooves of the shank and securely fixes it. In order to remove the nozzle back, you need to press on the cartridge towards the case of the penetrator and pull out the boat. To make the shank easily enters the cartridge, you need to lubricate it with graphite lubricant. It will also improve gliding balls included in the grooves. As the lubricant dries, you need to repeat the procedure.

Is it possible to insert a drill drill into a peorator?

The drill drill differs. There are no grooves, no recesses, no hooks on his shank. However, to drill metal, you need exactly a simple. How to insert a drill into a peorator in this case?

To do this, a removable cartridge is used, which has a shank, like an ordinary nozzle, and is inserted into SDS-mechanism. These cartridges come in two varieties:

  • Cam type. It is a canging clamp, which is driven by the key. There are teeth along the perimeter of this cartridge that form a gear. The key is included in the engagement with these teeth, and torque through the gearbox is transmitted to the zangia mechanism, clamping or freeing the drill.
  • Quickly recessed type. To actle such devices, the effort of the hand is enough. The gearbox used in the cartridge of this type has a greater gear ratio than the previous. In addition, a ratchet mechanism is often used, which limits the force of rotation and prevents independent turnover.

Possible malfunctions of the cartridge and their elimination

Often encountered cartridge malfunction is the impossibility of fixing the nozzle. The inserted drill flies back when working. There is a simple reason for this, and everyone can eliminate it on their own. To do this, disassemble the cartridge:

  • Remove the rubber boot, picing it from the end with a small flat screwdriver.
  • Remove the locking ring with the same screwdriver.
  • Remove the plastic boot.

After that, the whole mechanism becomes visible. Most often, such a malfunction causes wear of a steel ring fixing the balls of SDS-mechanism. Constant shock loads wear the walls of the ring, making it unusable.

To eliminate the cause, you need to replace the fixing ring with a new. Then collect everything in the reverse order.

change, drill, perforator, stuck

Cartridges for simple drills are not designed for shock loads. What to do if he failed? First, determine the nature of the breakdown. If the key slips when tightening, then you just need to replace it. In the event of a malfunction of the internal mechanism, you need to replace the cartridge on the shank. This follows:

  • Squeeze the shank.
  • Dilute the cang mechanism into the maximum diameter.
  • Unscrew the screw that will be inside. Attention: the screw has a non.Standard left.Handed thread. So, you need to unscrew it clockwise.
  • Remove the cartridge from the shank and install the new.
  • Twist the screw.

Before inserting the drill into the peorator with a new cartridge, it should be checked by its performance.

| Denial of responsibility | Contacts |RSS