How to properly wind the line for the trimmer on the grass trimmer: step-by-step guide and video instructions

A beautiful lawn will look really well kept only if the grass is regularly mowed. The grass trimmer is best suited for processing difficult areas. Any machine owner will sooner or later face the problem of how to wind the line for the trimmer on the spool, because the wrong actions can not only worsen the quality of mowing, but also put the equipment out of operation. Today in our Homius review we will tell you about all the ways and nuances of changing the line and the peculiarities of the choice of consumable material.

the grass trimmer is convenient for mowing small or difficult areas, such as near hedges, between beds, and along paths. Today, manufacturers produce a large variety of gasoline, electric and battery-powered models, which can be selected according to any requirements of owners.

As a cutting element of the grass trimmer, a line for the trimmer is used. In the process of work, sooner or later its length will end, and then the owner will face the question of how to properly replace and fix the thread, tucked into the removable spool.

How to coil a trimmer line onto a grass trimmer

If there is a summer cottage or a large plot of land near your individual house or cottage, then you need to use a lawn trimmer for easy cleaning of grass and weeds. If you think about choosing an electric or gasoline lawnmower, click here and you’ll find comparative characteristics of different models.

Over time, the trimmer line on the mower wears out and needs to be replaced. this can be done yourself. You need to choose this polyethylene thread depending on the model of the mower. It is also worth taking a look at the other parts of the machine, here for example the Craftsman lawn mower blades that will also wear out and can cause irreparable damage.

The design of the spool into which you insert the line for the trimmer is very simple. But it differs depending on whether the spool works with one or two strand tendrils. It is important to observe safety precautions when changing the line in the filament spool.

How to Remove a Grass Trimmer Spool; The Grass Trimmer’s Mowing Head

Before beginning to change the filament, the brushcutter head should be separated from the machine and the filament spool should be inside it. This element is attached to the end of the stick of your grass trimmer and is removed by unscrewing it in the direction in which the arrow on the spool points.

See also  How to put a fishing line for a trimmer on a lawn mower. ARBOR KNOT node

After removing the mowing head with the spool, it must be opened. First of all it is necessary to find the catch mechanism on the spool. It is part of the spool and is like 2 clips, by pressing on which you can open the spool and get to the place where you want to wind the line for the trimmer.

Open the mowing head and take out the spool for winding the line

You can open it with your hands, or with screwdriver or other tools that will pry open the pawls.

Spooling the line

Filling the fishing line into the grass trimmer spool is a relatively simple procedure, provided that you follow a certain algorithm of actions. When you need to determine how many meters of consumable material is enough, wind it on the bobbin so that the coil does not exceed the diameter of the curbs. Once you have determined the length of the cord, follow these instructions:

  • Fold the consumable in half so that one end of the line is 10-15 cm longer than the other.
  • Charging should begin with the central edge, which divides the grass trimmer bobbin into 2 parts. Find the groove where you insert the cord. Bend the last end in half.
  • Determine which direction you want to wind the line for your trimmer. To do this, look closely at the bobbin, which may have an arrow or inscription on it. It indicates the side of the winding. If there are no markings on the spool, look at the arrow on the mowing head to wind it in the opposite direction.
  • Wash the consumable material carefully, coil to coil. Try to keep the thread as tight as possible.
  • When you have finished laying the cord, fasten the short end of the material first. To do this, insert it into the groove on the side of the spool, which will fit the diameter. The second end (longer), attach in the groove on the other side of the grass trimmer bobbin.
  • After securing the line to the trimmer, cut the ends. Do not forget to leave a seam allowance of about 10 cm.
  • Install the tucked spool to the mowing head of the unit. To do this, you must alternately insert and pull the thread into the output holes of the head to then place the device’s bobbin into the skin.
  • Applying the required force, pull the cord out of the fixing grooves and tighten the material. When you have finished, put on the cover and secure it with the latches.

You can also wind the cord onto the grass trimmer in another way, which charges two strips of material instead of one. Replace as follows:

Safety precautions

In order to quickly and safely change the line on the mower reel, you must follow safety procedures. While removing the spool to coil the line for the trimmer on the lawnmower, you need to disconnect the technique from the power supply (if the mower runs on electricity). Here we want to mention the rating of electric lawn mowers on reliability, which helps to choose a safe helper.

See also  How to disassemble an electric lawn boss Bosch. Bosch lawn mower - technology that has earned confidence

Another important safety rule to follow is to press the locking button. There is an option to know its location on the body of the equipment with the help of the instruction manual. You can find, for example, the manual manual gasoline lawnmower here.

Do not forget that the cutting element should be adjusted. On the body of the unit there is a button for adjusting. If the process does not start automatically and there was a loosening of the thread tension, then the button is clamped, and the line for the trimmer with force is pulled out of the spool.

How to wind the line for the trimmer on the grass trimmer correctly

Garden trimmer for grass is a useful tool that greatly facilitates the life of any gardener or owner of a private home. In summer the grass just rushes, especially after the rains, so you can’t go anywhere without it. But eventually, sooner or later, the string in it will run out, and it will be necessary to insert a replacement coil of string. Some gardeners wonder how to do it on their own? So our article will help them.

Changing the trimmer line on the trimmer

This article will tell you how to change your trimmer line to a grass trimmer. For some people, this work may not be easy. But the step-by-step instructions that are available here will help you in this matter.

So the first thing to do. Remove the gear cover. Combine the hole on the side of the curly bottom washer and the axial recess, insert a screwdriver to secure the shaft from scrolling. Now unscrew the nozzle. The thread on the shaft tends to have a reverse thread, keep this in mind when loosening.

Next comes the disassembly of the nozzle. There, the cover is attached by latches from the hole. So you just need to put these clips in the holes, and the cover will come off. If the nozzle has automatic / semi-automatic line feed modes, this means that there is a spring inside, which can simply fly out when you open the cover, be prepared for this. Lay out all the stripped pieces neatly in order.

Now it’s time to take the trimmer line and unscrew 5 meters of it, cut this piece. Pay attention to its thickness, do not screw on the knot of line for the trimmer of a greater thickness than indicated in the instructions for the tool. Otherwise, there will be an increased load on the engine and greater fuel consumption during operation. Bend the measured trimmer line in half to find the middle and get a loop.

See also  How to choose the right lawn mower electric

There are several notches in the middle of the spool, sometimes these are not notches, but holes opposite each other. With the loop, we hook on one of the forks and wind the line for the trimmer counterclockwise. If there are 2 compartments in the spool, wind each end of the line on them separately. Leave 15 to 20 cm of free space and clamp it in the recesses of the coil.

We reassemble the device, pulling the loose ends of the fishing line into the holes on the body. Put the cover on, sliding the sliders into the grooves. Now you can remove those puffy ends of the mowing line.

It remains only to attach the working unit in place, as in the first point. Don’t forget to rotate backwards when winding.

Now you can learn how to wind the trimmer line around the grass trimmer. Actually, the whole process was described in detail above. No laborious operations that do not require the presence of specialists. Your brush is ready to use again.

Tips

Working with a technique like a grass trimmer requires care and attention. Compliance with safety measures during work is mandatory for beginners and experienced craftsmen. There are times when confident mowers lose their guard, make irreparable mistakes, and get seriously injured. That’s why it’s important when working with the machine

  • Close the reel cover with all latches.
  • Don’t wind more line than it’s supposed to be wound: it’s hard to unwind later.
  • After refilling the reel, be sure to check the tool’s operation before mowing.
  • Choose quality material that matches your trimmer.

Do not try to mow coarse grass with thick stems with a fishing line. There are steel discs for this. Wear only safety clothing. Wear goggles and appropriate footwear.

Tips

Working with equipment like grass trimmers requires caution and care. No problem for beginners and experienced trimmers. It happens so that self-confident trimmers lose vigilance, make irreparable mistakes and are seriously injured. When working with the machine, it is therefore important to

  • Close the reel cover with all latches.
  • Do not coil more line than necessary: it is difficult to unwind later.
  • After refilling the reel, be sure to check the tool’s operation before mowing.
  • Choose quality material, suitable for your trimmer.

Do not try to mow coarse grass with thick stems with a fishing line. There are steel discs for this. Wear protective clothing only. Wear eyeglasses and appropriate footwear.

| Denial of responsibility | Contacts |RSS