How to cut a part or product at an angle of 45 degrees

Sometimes it is necessary to trim this or that detail or product at a certain angle. As a rule, you need to trim baguettes, fillets, platbands, baseboards and other similar interior elements at a 45-degree angle. Everyone can cope with this task. The main thing is not to hurry, not to be nervous, and everything will turn out.

Buy ready-made corner elements

Of course it’s easier not to bother with trimming a particular part, and buy a ready-made one that doesn’t need any work or trimming. Such details and elements are sold everywhere today in large supermarkets or smaller stores.

For example, in regard to the baguette or moldings, then sold a special corner elements that fit perfectly into the corner and do not need to trim. They just need to be glued in place and pressed well.

The key to cutting

The inside corner of the ceiling plinth. that’s the key to everything. Professionals know that the ceiling plinth is cut on the outer edges and the front side (it is also the inside). To cut the ceiling blanks more conveniently, a mitre saw is used. It is extremely important to choose a good saw that will cut corners quickly and accurately. You can take an ordinary hacksaw for metal.

Quality trimming ceiling skirting is not possible without the right choice of materials. If the walls in the apartment are not flat enough, a smaller material is suitable for docking in the corners. Due to the fact that it is quite flexible, the corners on the ceiling plinths are more accurate. How to cut a large size ceiling plinth? The task is simplified when the walls are perfectly flat.

The next point is how to trim the baseboard depending on its location. The rule is very simple: the left one is always applied to the left side of the chair, and the right one. the right side. If you mix up the order of how to cut the ceiling plinth, then the docking will be a real problem.

Foam is the easiest thing to work with. Let’s take a look at how to trim a ceiling skirting board according to all the rules:

  • Having measured the corners of the walls, let’s get to work. If they are perfectly flat and are ninety degrees, you’re in luck. you only need to cut a corner of 45 degrees. The principle of working with the 2nd segment is exactly the same;
  • But how to cut the corner of the ceiling plinth at curved joints? The radius of the corner between the ceiling covering and the walls is divided by 2;
  • Once again, pay attention to how to cut the corners of the ceiling plinth. The baguette to be glued on the left side has a characteristic cut on the right side, but the right-hand corner is cut on the left;
  • Important question: how to cut the corners of the ceiling plinth inside and outside? The lower edge always protrudes over the upper edge, the opposite is true for the outer corner. Supple styrofoam and soft texture do the job. fitting such accessories is much easier. Have to fumble except with wooden or plastic parts;
  • When the inner and outer corner of the ceiling plinths are ready, the strips are tried on the ceiling. They will need to be trimmed according to the direction of the adjoining surface;
  • If the rough joint was successful, the fillet is glued or screwed to the wall and ceiling. The seams are reliably sealed.

How you need to work with a mortar?

We have told you how to properly cut the ceiling plinth without any other tools. Now let’s dwell on the technique of working with a jigsaw, in more detail. Follow all steps in the same sequence. and the outer corner of the ceiling plinth will be perfectly flat:

  • Having put the baseboard against the wall, measure the length you need;
  • Place the plank in the mortar, so that its position coincides with the position on the ceiling. Press it against the far wall;
  • hold the plank with your left hand. To ensure that the cut accessory has no jagged edges and does not break, the saw is pressed with a minimum of force;
  • To cut the counter part, the procedure is repeated in the same sequence, but hold it with the right hand;
  • How to cut the corners of a ceiling plinth if it is made of wood? You proceed in exactly the same way, but because the wood is not as flexible, the edges are also trimmed with a file at the end;
  • To exclude incorrect calculation of size, begin with the marking of the inner corner, and then move on to the outer. Severely cut outer corner can lead to the fact that the length of the strip is simply not enough.

Ways to get a nice corner

The corners are the most difficult areas of the ceiling frieze. If you just cut the skirting at the right angle, unsightly gaps will remain. To achieve a snug fit between two adjoining products, you must also trim their edges. There are several ways to do it.

In rooms with even corners and walls, it is usually not very difficult to cut a ceiling plinth with a wire cutter. The tool has the form of a U-shaped trough with made guides for the saw at an angle of 90 and 45 degrees. After placing the piece to be cut inside the device, insert the saw into the guides. When cutting, hold the mouldings firmly in place to avoid imperfections. It is difficult enough to cut a skirting board, as it is necessary to achieve its simultaneous adjacency to two planes. If the width of the baguette is small, it is more convenient to press it to the near side. “How to cut ceiling plinths. tools and cutting rules”.

How to cut the corner of the ceiling plinth, if the outer corner is designed:

  • Before you cut the corners of the ceiling plinth with the mortiser, a 45 degree angle cut is made.
  • The chair should be set in a comfortable position. It will allow to define an exact position of a plinth: first of all it concerns that edge of a product which will adjoin to a ceiling. To avoid confusion, it is most convenient to place the right-hand slat on the right, and the left-hand slat on the left.
  • The surface is pressed against the underside of the jigsaw. In this case, the second part is lifted, being the closest. It must be so placed against the wall of the jigsaw so as to avoid its wobbling during the work. In this positioning the front side of the product is turned to the opposite side.
  • The kerf must be made at a 45-degree angle. If everything is done correctly, when you fold the two halves, you get a beautiful outside corner.

After properly sawing off the ceiling plinth in the corners is completed, both pieces should first be attached to the ceiling “dry” to check the matching geometry of the corner. If necessary, adjustments are made by trimming with a knife. Small gaps are easier to mash with putty, which, after drying, must be processed with sanding paper. As for the inner corner, it is much easier to formalize it.

The procedure, how to cut the ceiling plinth in the corners of the internal type is much like the above described. The first step is to determine the side that will be adjacent to the ceiling. It is placed on the bottom of the jigsaw. The back side is leaned against the near wall. After sawing off the plinth on the ceiling is finished, the received fragments should be dry applied to the corner, checking the quality of the joint. If necessary, adjustments can be made. After that, the installation of one and two skirting boards on the mounting compound. Small gaps in the corner can be filled with a special putty.

degree, angle

Polyurethane

Polyurethane baseboards are the most expensive products. High cost is due to a large number of advantages, among which. excellent resistance to moisture, high mechanical strength, reliability and elasticity. For most situations this will be the best option.

However, there are exceptions. polyurethane does not withstand temperature changes. If you place such baseboards in the kitchen in the area of the stove, then over time, polyurethane will deform and crack. Cutting such bars is performed by a special knife, and there are no complications in the process of work.

How famous events influenced the strawberry business?

Hello all. While we have Ukraine and all the well-known events here, we continue to grow the berry in winter. Strange times, as the Chinese supposedly say: God forbid you live in an era of change. Although I do not think the Chinese say, “God forbid” But never mind. What are we doing on the winter strawberry plantation? And what difficulties we encountered on our way as a business of growing strawberries in winter. There are pros and cons.

First of all, let’s talk about the disadvantages. Everything became more expensive. Pictured above is our new nursery, where we just plugged in the first rows. On top there will be two floors, and a total of 4 floors of shelves will be 5.

Light for the plants we make ourselves, and here just 25 February, the supplier told us that he can take payment for components, but the rate of 100r per dollar. Arguments about the official exchange rate 83r were ignored. Well what to do, we took it with teeth, because the product is really high quality, but they still need to work out the management.

Now as for fertilizers. also went up in price. And although they do not play such a significant role in our costs, it’s still not very nice.

Although mineral salts we now take domestic, that Bui chemical plant or some Norwegian Yara, as Sergeant Hartmann said in the famous movie: “I do not have racial prejudice, you’re all alone worthless!”

Sprouts! Has risen several times, for its price is tied to the euro. We don’t have nurseries for seedlings and people either make them themselves or buy them from farmers or order them from Europe.

From Europe it’s considered the top. Because the quality is disproportionately higher. Here, of course, some may argue that we do pretty well themselves. But it is one thing to multiply moustache in your own greenhouse and it is another thing to polish the technology of production, including selection and receive at the output virus-free seedlings, and even with a proven potential. So you know exactly how many grams of berries each bush will give you.

degree, angle

To understand our backwardness in this industry is like comparing domestic astronautics and the Cuban. Were the Cubans in space, they were, but that does not mean they are a space power.

Now, as for the berry itself and sales. We have been picking fresh strawberries for the 6th month in a row since October. During this time we gained a customer base. But we did not try very hard to expand it and at a certain stage we even stopped advertising, because we could not satisfy the flow of those who wanted to. We are going to expand from 1000 to 3500 bushes by the fall.

But then they cut us off from Instagram. Of course, it amused the feeble-minded, they say: “Azaza, you fools will go to work at the factory now, not to take pictures of your ass”, but people with brains understand everything. It’s not just dorks with butts and sponges on instagram. A lot of people were making money through insta. Since this is essentially the showcase of your business. And this showcase will be seen exactly by key customers.

Most of our clients are private confectioners, cakes, chocolate covered strawberries. And it’s felt now, how orders from their side have fallen. It means that their orders also fell. Personally, our content coverage has dropped by 2/3. Fortunately, at one time I started to develop a Telegram channel, where I talk about how I grow berries, but it’s certainly not quite the same. Now, as a bunny on batteries, you need to promote the TV, YouTube, Rutube, contact, Zen, tic-toc, etc. etc. What those who blocked the insta were thinking, it’s not entirely clear.

Now for the good. Sprouts. We were already planning to do seedlings for the spring, and in general the plan is to build a summer greenhouse and grow year-round. And considering that a good seedlings you can not find, and we always do as yourself, the Abandonment of those wishing not, especially given the fact that many were dragged from Europe or bought from resellers, and now with the euro, a bush seedlings moved much over 100r.

And even without all these price jumps, we have in the region are so brazen and shrewd sellers that they are not afraid to ask for half-dead bushes sick spots from 80r per piece. Therefore, mastering a new kind of activity. So far not bad, but it would be much better with insta.

How to make a chisel with your own hands

In stores, the tool costs around 250-300. However, you can make it yourself from construction materials that are leftover from every home.

You will need a one-meter long board or thick plywood of the same size. Will also need:

  • Saw a board or plywood on 3 pieces of equal length width of 20. 25 cm;
  • Connect them with self-tapping screws in the shape of an inverted U;
  • Using a protractor, mark out the points on the upper parts of the jigsaw so that the line for the trimmer, which connects them, forms the right angle (in the case of baseboards, 45 and 90 degree markings are sufficient);
  • Make notches in the points with a hacksaw so that they reach to the bottom of the tool;
  • counterbore the slots with a rasp so that a hacksaw or a jigsaw can easily fit through them.

Decorative mouldings

With these products things are both easier and more complicated at the same time. The need to saw them off, most often occurs when joining the two parts at the joints of adjacent walls of the room. Here it is very important to evenly dock them on the cutting line. To do this, as a rule, one chisel is not enough. You have to help with the cutting and marking.

Apply one of the parts to the ceiling as it will be attached. Outline with a pencil on the slab an even trimmer line on the outside of the piece. Repeat the procedure, attaching the ledge on the other side. A crosshair of drawn lines is formed on the ceiling.

Next, by attaching the parts in turn, each from its side, transfer the point formed by the crosshair to them.

Draw a trimmer line on each piece, connecting this point and its opposite corner. Cut or saw a piece accurately along the marked line and then repeat this operation with the second piece. After such trimming, they will match almost perfectly, even if the wall joint is uneven.

If all the walls in your house or apartment are flat, and a special adjustment of the elements is not required, you can use the familiar tool. the plier. After inserting the ledge with the side that will face the slab downwards, position it so that the long side remains on your left. Press it against the near side of the fixture and saw it off with a hacksaw inserted into the groove with a mark of forty-five degrees.

That’s how you get the left side. To make a cut for the right segment, you need to repeat all the above operations, but, the element to be cut should be placed with the long part on your right.

| Denial of responsibility | Contacts |RSS