We make beads from wooden beads with our own hands: step-by-step master class

Wooden ethno-fingering today has ceased to be attributes of only a folk style. Natural wood jewelry was noticeably transformed, following the tastes and requests of the current generation of fashionistas.

Nowadays, colored and unpainted wooden beads are often included in the collection of the most famous fashion houses. Of course, buying a wooden necklace in specialized stores and online sites does not have much effort, but an ethnic-style beads made of wooden beads made by yourself will look much more original and stylish. In addition, you will be one hundred percent sure that no one else has such beads except you. And the process of creativity will bring you such joy that it is very likely that such a hobby will turn into your favorite work that can bring a decent income.

Therefore, today we bring to your attention a master class on creating a necklace of massive wooden beads.

The necessary tools and materials for work:. 12 wooden beads with a diameter of 25 mm. 12 wooden beads with a diameter of 20 mm. 6 wooden beads with a diameter of 16 mm. 24 or more wooden beads with a diameter of 12 mm. Painting or varnish for wood

Step One: Color the wooden beads in the color suitable for your project. To do this, use gloves and paper towel, as well as apply varnish or paint in a well.ventilated room. Before putting on a necklace, painted beads must dry for several days.

Step two: string the beads on three nylon mononii in accordance with the photograph of this step. The first is low-3 balls with a diameter of 12 mm, 1 ball 16 mm, 2 pcs. 20 mm and 3 balls of 25 mm, after them-symmetrically repeat low in the waning sequence. You can add more small beads if you want more beads in the necklace and less chain. On the second, string 4 balls with a diameter of 12 mm, 1 ball 16 mm, 2 pcs low. 20 mm and 4 balls of 25 mm, after them-symmetrically repeat low in the waning sequence. And on the third low you should have 5 balls with a diameter of 12 mm, 1 ball 16-mm, 2 pcs. 20 mm and 5 balls of 25 mm, after them-just like in the previous lows, repeated symmetrically low in the waning sequence.

Step Three: stringing a sufficient number of beads for the desired length of the low, tie the mononym on the node on each of the three connectors. Leave about 5 cm of the hanging tails of the mononity to stretch them back in low, under the beads so that they are not visible.

Step Four: if you do not use a sufficient number of beads to wrap the entire neck, you need to attach a metal chain to the connectors. We used a 7-mm double ring to attach the chain to the connectors and then attach the clasp to the chain. You can use any type of fastener you like.

Now you know how quickly and easy to make simple beads from wooden beads! And despite its simplicity, this necklace certainly attracts attention. You can easily change its design using more beads, varying their size and color. Agree, this is a great idea for a gift.

In addition, it is worth noting the special value that juniper beads possess. If you choose this wood for your needlework, then its wonderful smell will normalize the functions of the nervous system, enhance the metabolism, the immune system, relax and calm, eliminate headache, and heal from insomnia. In addition, the texture of the juniper is unusually picturesque, has a reddish tint, and often stripes or waves. It is especially attractive on the transverse cut. Using juniper beads, you will both improve your own health and acquire a beautiful accessory that will perfectly fit into almost any outfit.

And juniper beads are indispensable for young mothers. It is customary to wear them together with the sling, which fixed the names “Slingobuses” behind them. In this case, they act both as an aesthetic and environmentally friendly accessory, and as a very useful developing fun for the baby. For example, in the process of feeding, the kids like to feel everything that they reach their pens. Juniper slingobuses in this situation are an excellent solution: they will attract the attention of the crumbs and take it. Due to the roughness of the surface of the beads, the variety of their sizes, rustling and tapping, the crumbs in games with these wooden balls more intensively develop fine manual motor skills, as well as tactile sensitivity. Children who only cut their teeth are most likely to try to bite and gnaw the slingobuses to scratch the gums. Here the healing qualities of the juniper will show their action, preventing their inflammation. Only for the manufacture of a slingobus, of course, you can not cover them with paint, varnish and other chemicals.

The juniper necklace can be easily washed with soap foam, just do not leave them for a long time in water, since they can then dry out during the drying process.

How to make caffes with your own hands: step-by-step master class

Kuffs. earrings in the form of cuffs on the ears. this is an original and fashionable jewelry framing the edge of the ear. Today we represent a master class, following which you will make elegant very quickly.

The choice of material

Although initially the process of producing beads made of wood and it seems something difficult, in fact it is not such. The phased scheme for creating this jewelry will help the case. The first stage in it is the choice and workpiece of the material.

The most suitable period for collecting material is autumn. If fruit trees grow in your yard or in the neighborhood, then their branches are perfect as it.

Important to remember! For work, it is best to use branches with a diameter of at least 20 mm, the density of wood in which reaches the necessary minimum. If the diameter is smaller, then you risk encountering difficulties, because thin branches often have a porous structure and will break during the processing process.

If there is no garden in the vicinity, then you can take any remnants from wooden products to work. The main thing is that they would be from sufficiently soft wood, this is important for the first work. And naturally, the amount of wood should be enough for all beads, because the decoration that has components of different breeds does not always look organic.

It should be remembered! When choosing the material, pay attention to defects, cracks are not permissible, they will spoil the appearance. Try to avoid the bitch too, because their presence will complicate the process of work, and wooden beads can break at any time, having such a flaw.

Process of Making Wood Beads

Natural beads: types and application

Having set the goal of buying beads of natural origin, we can find that there are three varieties of decorative stones:

The former were really mined from the earth’s subsoil, robbed and polished. This is the most expensive type of stones.

The pressed material is obtained as a result of mixing fragments and dust remaining after processing the obtained stones with adhesive solution. The resulting substance is subjected to high pressure, as a result of which the substance is formed, in appearance and characteristics similar to the original fossil.

Artificial stones are fully made by man. At the factory, chemicals are mixed, from which natural stones are formed in nature, and significantly accelerate the process. Thus, they make not only turquoise, amethysts and other semiprecious materials, but even diamonds.

Wooden Bead Bracelet feat. BeeBeeCraft.com Products

When a cut of natural stones occurs, waste inevitably occurs (knotted and cut fragments). If they are quite large for dust, but not large enough for cutting, they are polished and sold like a chip. This is the cheapest type of natural materials for needlewomen. Scole is used to make beads, necklaces, earrings and rings. It is also actively used for the manufacture of interior crafts (paintings, trees of happiness and others).

A good alternative to natural beads became ceramic. However, their disadvantage can be considered severity and fragility.

We make an accessory from “crumpled” beads

Roman beads are very spectacular, they are used, as a rule, interspersed with glass, wooden or pearl elements. If you make them from different fabrics, then you can make the image incredibly bright and attracting attention. In addition, the process of their manufacture itself is quite simple.

Materials and tools

  • A cut of fabric, you can use small flaps of different colors;
  • filler. you can use a synthetic winterizer, holofiber or cotton wool;
  • thread with a needle;
  • a fishing line for a trimmer or a thread on which everything will be strung;
  • fastener.

How to do it

The manufacturing process will require certain patience. This is the sequence of actions should be withstanded:

  • Cut small mugs from the fabric, such as the size of the beads then need;
  • Put a small piece of filler inside the fabric;
  • collect the edges of the fabric and flash them with a thread so that they gather in one center;
  • Try to make the edges as much as possible inside the central point and make an injection with a needle there, taking it off the back of the bead;
  • stretch the thread, make another puncture nearby and bring out in the assembled center;
  • This sequence of action is repeated several times;
  • the thread should gradually be pulled up so that a stable form is formed.
beads, made, wood, wooden

After the required number of elements is obtained, they are strung on a fishing line for a trimmer, thread or tape for the formation of decoration.

Reference! In order to make an interesting decoration in the shades of Degrad, you can take several types of fabric of the same color, but differ in tone. After the manufacture of beads, string them in the sequence of changes in the intensity of coloring.

DIY jeans beads

If at home there are scraps from old jeans or jeans that will not be rushed, then you can use them to make stylish jewelry in the Kasil genre. The technique is so elementary that even the child can cope with it, and the final result can please even the most demanding fashionistas.

Necessary details

In order to fulfill such beads, you will need:

  • jeans fabric cuts;
  • wooden thin stick;
  • the thread on which the components will be worn;
  • clasp;
  • glue;
  • Additional decorative elements.

A step.by.step algorithm

The shape of such beads will differ from the standard. It is a cylindrical that can be different in height. Then:

  • Cut the strips of fabric required in width, they will correspond to the height of the beads;
  • wind strips on a wooden stick and make sure that the column is even;
  • glue the end of the fabric, thereby fixing the strip;
  • gently pull the wand;
  • You can, if desired, decorate the resulting cylinder with decorative elements;
  • Then, from such peculiar barrels, to form a finished product as it was planned at the initial stage.

How to make wooden beads with your own hands

For manufacture, you will need a metal clutch, or as an alternative to a fishing line for a trimmer, which is used for jewelry. We take 28 beads and have them in the order as you wish.

With the help of accessories, we make branches so that everything holds firmly and does not talk on the fishing line. After that, take a nylon thread and string beads on it, be sure to fix the thread.

You can make the sequence exactly the same as indicated in the picture, but it can show your imagination. Show fantasy and most importantly what you need to remember is to make smooth transitions from large details to small.

After that we take another thread that will be the final stage. To do this, take the most massive beads.

The manufacture of the decoration has come to an end. At first glance, it may seem that the work is quite complicated, but this is not so. By making a little effort, you can make a beautiful jewelry that no one will have anymore. It will be a great gift option for mom, sisters or girlfriends for March 8. Such beads will be an excellent addition to the image not only for girls, but also for guys, children.

What do you need

Before proceeding with the main process, you should prepare material and tools (read the article “On wood: the choice of paint, components and tools, painting technique”).

The price of the set is small, you have a lot at home:

  • Sekator.
  • Fruit or other trees.
  • Penknife.
  • Hand drill.
  • Nail file.
  • Sandpaper.
  • Lines for a trimmer.
  • Acrylic paints.
  • Acrylic sealant.

Bracelet made of wooden beads for men

Process

The instructions below will help to complete the task without unnecessary actions:

  • Select the branches suitable in diameter and cut them using a secateur, we recommend choosing the blanks of approximately Ø 12-13 mm. You can also use for work those that have been cut previously.

Tip: try to pick up branches, the diameter of which is as suitable for each other.

Put the entire bark from the blanks with a penknife, while act carefully and carefully so as not to damage the layer of wood under it.

In the photo. neat round beads

The best option for oval beads:

For round products, these parameters must match.

  • Select a drill from a drill not more than 6 from a set.5 mm in diameter, then securely fix the workpiece. Slowly and neatly with the tool drill the last in the center. Keep in mind that such work may require a lot of time, but you don’t need to rush.

Tip: Do not use an electric drill for this work, it will simply ruin the future bead.

  • Now you need to dry our blanks well. To do this, put them on a flat surface under the sun’s rays, while select a place with good air movement. In this case, your future beads will dry out much faster. We recommend not to proceed to the next stage of work earlier than 7 days.
  • After drying, take a file or nail file, as well as sandpaper and give the workpieces the final shape resembling the egg. However, if you have a desire, you can give beads any shape, for example, a ball.

You can supplement your accessory with various elements

  • Take the prepared fishing line for the trimmer and string the finished beads on it, and then lower it into a container with acrylic paint diluted with water. The consistency of the latter should allow the blanks easily covered. Using a soft rag or paper towel, remove the excess paint and hang the beads to dry in the air. The process occurs quickly, usually within a few minutes.

Tip: it is better to dye all the beads at the same time than one, then the appearance of the jewelry will be much more beautiful.

  • Apply acrylic sealant over acrylic paint and wait until it dries. Remove the beads from the fishing line, now you can create any jewelry with their help.
beads, made, wood, wooden

Men’s jewelry from beads

Jewelry from products strung on a thread or fishing line for a trimmer can be used not only by women. They appeared even in antiquity, when men preferred to use them.

For example, the leaders of various tribes or hunters tried to emphasize their status among others, using various trophies or exotic items in the form of blanks. And although the beads have become a common female accessory over time, modern fashion is trying to restore status quo again, offering options for men.

Short men’s wood beads

At first they were used only as an additional accessory for clothes for relaxation or in a creative environment free of prejudice, but soon everyday style entered this orbit. Today you can most often meet them in a costume of celebrities who try to be in the forefront of a new trend.

In our country, beads prefer to wear youth of creative professions and subcultures.

What is the difference between men’s beads and female

There are several parameters that will allow you to quickly distinguish one accessory from another:

  • Choker. is considered one of the most popular varieties. The length of such beads is short, but it allows you to freely wrap the decoration of the base of the neck.
  • Often they are complemented by various elements, for example, a pendant that resembles a coin, a blade, a claw.

Step.by.step production of wooden beads

Having collected the twigs corresponding to the description above, you should cut them with rings, slightly larger than the maximum diameter of beads. This is necessary for maneuver in processing.

If you have different diameters, then use excess wood from the resulting rings with a knife or chisel. In the case of manufacturing simple beads, make all the blanks of the same size.

Advice! If the choice of material is quite wide, then it will be ideal to select branches of similar diameter with beads, so that after separating them from the bark, the process of subsequent processing is reduced as much as possible.

  • Drilling. the main thing is to clearly understand what wooden beads made by yourself will look like, based on this, you should choose the diameter of the drill. This operation must be done before processing, since the blanks for convenient drilling are clamped in a vice, and this damages the surface of the beads.

It is important to remember. the electric drill should be used very carefully, because it can ruin the workpiece. It is possible to prevent this by drilling at minimum speeds.

A set of supers will help to give the desired shape to the future beads of wood, but it is important that you have a clear idea of ​​it about it, then all the beads will look harmonious on the fishing line.

Select the desired length for fishing line and string all the beads on it in order. Attach the purchased mounts to the fishing line, this is done using nodes similar to those that are used for cringing hooks.

Bus painting occurs after they fixed to the fishing line, this is done for the convenience of the color itself and subsequent drying. The paint should not be too thick, so that the entire surface of the bead could even cover. If it is too thick, then you can dilute the paint with water. Pin excess paint with a paper towel or napkin, a rag is also suitable.

Beads made in the “Felting” technique

Fasting from wool is a very interesting and exciting hobby, thanks to which you can make a bunch of cute things.

Take a look at the photos of woolen beads made by your own hands, and you yourself will see that it is not so easy to guess from what material and how they are made, which means that you will have a unique and attractive accessory.

  • Wool of various colors.
  • Film.
  • Rubber mat.
  • Sharp knife.
  • Bamboo rug.
  • Towel.
  • Grid.
  • Soap solution.

We will analyze a detailed master class on creating beads with your own hands:

Pinching small, the same in size, pieces of wool, put them in a row so that it turns out a multi.colored canvas measuring 30 by 20 centimeters.

Moisten the workpiece with water and cover with a net, and on top of spleen in a pre.prepared soap solution. Next, spread the wool of another, contrasting shade on top. It will serve as a separator between colored pieces.

Cover the blank again with a net and sprinkle with soap water. Next, using the film, wrap the rolling of the roll and roll it thoroughly so that the layers are clenched among themselves.

After that, wrap the roll with a towel tightly in a bamboo rug and continue to roll until the workpiece turns into a single whole.

Now it remains only to cut the resulting roll into the same pieces, string them on a fishing line for a trimmer or a strong thread and beads are ready.

Master class: how to make beads made of wood with your own hands 5 /5 (3)

Ethno jewelry made of wood has not been associated with Russian folk costumes and kokoshniks for a long time. Fashion for jewelry made of natural wood underwent changes, following the needs and needs of modern fashionistas.

Now colored wooden beads can be seen from the catwalks of the most famous fashion houses, the stylists of which are increasingly included in ethnic style accessories in their shows. Of course, buying a tree made of wood in specialized stores or Internet sites is quite simple, but ethno jewelry always looks original and stylish, you will definitely know that only you have such beads. In addition, creativity gives joy and increases self.esteem, and sometimes a hobby and develops into a favorite work that brings considerable income.

Choosing a model

To begin with, you can find pictures of Russian folk jewelry on the Internet, or come up with your design and draw those beads that you want. The drawing should not be abstract, it is important to accurately determine the model. It can be in such a form as:

  • Small short beads in one thread;
  • Long beads of beads of the same size, or a combination of large and small balls;
  • Wooden necklace in several tiers

After the choice is made in favor of a particular model, it is necessary to calculate the number of beads, their shape, size and color preferences. The color of wooden beads can be given in several ways. The simplest of them is to treat wood with a stain. When dried, processed beads become a little darker and acquire a beautiful shade. Also in the store you can buy colored paste with different effects (for silver, bronze, with glass effect). The beads of wooden beads are beautiful that you can not limit yourself to fantasy, and create just such a jewelry that your soul or your favorite dress asks.

What will be needed for work

We have already touched on this topic a little when we talked about choosing a model, but still it will not be superfluous to give a list of basic materials that you need to buy:

  • Juniper beads (or any other breed). If you do not know where to buy these same beads, buy rosary and use them.
  • A finished base of metal into one or more tiers with a fastener;
  • Morilka
  • Wood or colored paste
  • Acrylic lacquer
  • Brush

Any accessories can be added to this list if you want to combine beads made of wood with skin, minerals or glass. Wooden balls wrapped in a jute thread or decorated with lace look very stylish and fashionable. As a result, you will make a do.it.yourself jewelry of wood for women who will admire everything around, as we make them.

We make beads in one row

  • For example, we will make short beads of wooden balls of different sizes covered with stain. Such a decoration looks gently and feminine, and importantly, it is suitable for most cuts of a blouse or dress.
  • For the beads of our model you will need beads of different diameters, three large beads of 25 ml, 6 beads of 20 ml, and further in decreasing size. In total, we need 15 wood balls. First of all, you need to soak the details with a stain. It is better to do this on the balcony or in a well.ventilated room. Prepare a napkin and pliers in advance. It is necessary to soak the napkin with a stain and, holding the bead with an instrument, rub it into the wood. The stain will dry quickly, but the dark color will acquire a little later, so do not overdo it, and do not burn the wooden details.
  • As soon as the beads dried up and became a beautiful amber color, we string them on the workpiece so that the three largest balls are in the middle, followed by three beads of a slightly smaller size, and so on.

Simple, but very stylish decoration, ready! You may not limit yourself to one tier, but create a whole necklace of three or four rows, decorating beads with textiles or voluminous paint. Various handmade pendants look great, which can be mounted on a lace or a long thread from tiny beads.

Create, reveal your talents, share your successes in the Комментарии и мнения владельцев to our article!

Step.by.step production of wooden beads

Having collected the twigs corresponding to the description above, you should cut them with rings, slightly larger than the maximum diameter of beads. This is necessary for maneuver in processing.

If you have different diameters, then use excess wood from the resulting rings with a knife or chisel. In the case of manufacturing simple beads, make all the blanks of the same size.

Advice! If the choice of material is quite wide, then it will be ideal to select branches of similar diameter with beads, so that after separating them from the bark, the process of subsequent processing is reduced as much as possible.

  • Drilling. the main thing is to clearly understand what wooden beads made by yourself will look like, based on this, you should choose the diameter of the drill. This operation must be done before processing, since the blanks for convenient drilling are clamped in a vice, and this damages the surface of the beads.

It is important to remember. the electric drill should be used very carefully, because it can ruin the workpiece. It is possible to prevent this by drilling at minimum speeds.

A set of supers will help to give the desired shape to the future beads of wood, but it is important that you have a clear idea of ​​it about it, then all the beads will look harmonious on the fishing line.

Select the desired length for fishing line and string all the beads on it in order. Attach the purchased mounts to the fishing line, this is done using nodes similar to those that are used for cringing hooks.

Bus painting occurs after they fixed to the fishing line, this is done for the convenience of the color itself and subsequent drying. The paint should not be too thick, so that the entire surface of the bead could even cover. If it is too thick, then you can dilute the paint with water. Pin excess paint with a paper towel or napkin, a rag is also suitable.

Step-by-step instruction

We string 3 beads

We take both threads, fold together and at a distance of 25 cm from the end we tie a knot on them. Then we put 3 beads with a diameter of 8 mm on both threads together, after which we share the threads and put into the work separately.

We cross the threads

We take another 8 mm bead and toss both threads from the opposite sides in it. one thread from left to right, and the other from right to left.

We tighten the threads

The threads need to be tightened very tight that the bead sat close to the previous three beads.

We string 1 bead

On each thread we string one bitter with a diameter of 8 mm.

Weave three fragments

Then both ends of the thread again from the opposite sides are tied into one bead. Thus, we make 3 fragments.

We string a large bead

At the end of the third fragment, instead of one small bead for cross.stringed string, we use a bead with a diameter of 12 mm.

Repeat the steps 2-5

Repeat 2-5 steps three times using beads with a diameter of 12 mm.

Weave the central element

To create the central element of the necklace, we string 3 large beads on one thread, 1 on the second, after which we stretch both threads on the opposite sides into another large bead.

Weave the second part mirror

Having made a central element, we repeat the weaving in the reverse order.

We finish the work

We finish the work of three small beads strung on both threads. We pull the threads well and tie it into the knot, making sure that it adjoins the beads closely.

We attach the stoppers

To complete the thread of the thread, we pass through the stoppers with a hook, cut out the excess, and the stopper tightly clamps with the pliers.

Lesson. Beads from a wooden basis.

Following Natka_belka. showing how to wrap the bead with a square cut of a kaleidoscope, I hasten to show how to use wooden beads as a basis for plastic beads, and at the same time demonstrate a way of utilizing the “tails” from sausage. This is how these beads made of scraps of sausage with the Martian eye were made

Using wooden beads as a basis is very convenient and economical. one. Wooden beads are much cheaper than plastic2. The beads are flat and round, with a well.discounted hole, since plastic is smoothly tightened by a wooden blank.3- jewelry of such beads is much easier than entirely from plastic.

You will need- the remnants of the plasticity of slurred color- simple wooden beads (you usually need about 15 beads for short beads)- liquid plastic (gel Fimo, Cato or Scalpy) or varnish (preferably “Skalpi. Studio “)- remains of colored sausage. You can also use a bar with a mokum-dress or several different small multi-colored sausages.

Instead of wooden beads, you can take acrylic, plastic or unsuccessful plastic beads. In these cases, the gel will not be needed. Acrylic and plastic beads must be checked by first putting one of them in the oven for 20 minutes, and observe without leaving the oven, whether the bead melts or not. If the bead has withstand the temperature necessary for baking your plastic, then it can be safely used for the basis. If you notice that the bead starts to melt, immediately take it out and throw it away, and take the wooden or use the foil. About how to use foil as a basis, Grgalina told here.

The surface of simple unpainted and unlawed wooden beads is quite porous, so plastic sticks well to such a basis, and when baking, air bubbles are formed. With painted or lacquered wooden beads, this may not happen. But in any case, the problem of sticking and the appearance of bubbles will help us to cope with liquid plastic. The gel penetrates the porous texture of the tree, filling the gaps, and provides the best adhesion with plastic. If there is no gel, you can first lay wooden beads. You can cover the beads with two or three layers of varnish, but one that does not burn at 130C and will not interact with plastic in the future. It is better to use the stalcoe plastic varnish.

Roll out slurred residues with an even thin layer. Cut into circles of suitable diameter. So that one circle of plastic covers exactly half of the bead.If there was no suitable round cap, molds or boat, you can simply cut the layer into the same squares of a suitable size, and put on the bead in the same way as Natka_belka showed.Lubricate each circle (or square) on one side with a drop of gel evenly. To do this, it is convenient to use cotton sticks. Do not take brushes, then it is difficult to wash them.If your beads are covered with varnish or paint, and plastic to them sticks without problems, the gel is not needed.

We put on half the beads with one mug. The gel side to the tree, of course. Tightly, without air s. It is better to leave holes on the sides so as not to lose. We roll a little bead between the palms, leaving the layer of plastic.

We put on the second half of the bead. And again roll the bead in the palms. We are looking for a hole. pierce it with a knitting needle or a thick needle.

We pierce several holes with a needle over the entire surface of the bead so that the air, which could still remain inside, has the opportunity to go out when baking. We remember that when heated, the air expands. These holes are needed so that the beads do not swell.

We put ready-made beads on the “accordion” of paper and put it baked on the desired tempera-loot (Fimo 110C, rocks 120-130s, etc. See the instructions for your plastic.) I bake scaldi for 120C 20 minutes, t.to. A layer of plastic about 3 mm is obtained.

6- Ready-made baked beads-renewers are cooled and look at how many bubbles appeared on them. If there are many and large, then such beads just need to be wrapped with another even layer of plastic, but you can no longer bake and do not make holes, t.to. Raw plastic sticks perfectly to the baked, without problems and air s. It will be central beads more. If the beads are even or the swelling is very small, you can immediately wrap them with a beautiful layer. So it turns out less beads.

7- Cut our colored plastic. I take a sausage tail, but the block of Mokuma Gan or several colored sausages with a pattern that you want to decorate the beads is also perfect.We try to cut into pieces of the same thickness, not too subtle, but not thick. About 1-2mm.

8-boarding the bead-Osnov with a colored layer. The first piece is chosen more so that it covers almost the entire bead, or at least half of it. Important. Remember where there was a hole! We ride in the palms, leafing.

9- We cover the holes left without a drawing suitable in color and size pieces. And again we roll the bead in the palms, leaving the layers.Attention! Roll Lusha like that. Three or four turns clockwise and then three or four turns in the opposite direction. And again. clockwise, and immediately against. So the pattern is less deformed.

10- In the finished bead, we again make a hole. Remember where you had it?;) If you forgot. Pull the bead with the thinnest needle, “groping” it. Then pierce the found hole with a thick needle and still gently roll the bead, staging the holes made by a thin needle during the search.

The bead is ready! We do as much as we need, bake for another 15-20 minutes, cover with varnish and collect funny beads!

| Denial of responsibility | Contacts |RSS