How to distinguish the fake of the Makita 2450, 2470 from the original

Environmental lovers of Makita Makita 2450, 2470 are particularly popular among lovers of lovers. This popularity is supported by a high degree of reliability of tools, their long service life without forced failures, the simplicity of the design and the availability of repair. As you know, there is also a fake of the popular Makita tool, we will consider what the difference is and how to distinguish an original tool.

Makita peorators are produced in various countries. This can be determined on the nameplate mounted on the suitcase or tool case.

distinguish, makita, tool, fake, package

If the letter A is on the nameplate, then the tool is produced in the USA. The letter D points to the German manufacturer (Dolmar factories), the letter E shows that the tool is made in Japan, the letter G is made in the UK.

But there are also Chinese peorators produced in China and designated by the letters y or (k but this is often a replica)

Peorators Makita 2450, 2470, produced in Romania, are marked by the letter R.

Original Makita Poorator

In fairness, it should be noted that Chinese peorators are made in Chinese factories belonging to European manufacturers. Peorators are made on the same lines, from the same details, the same workers. The only difference: for the European consumer, instruments are double.controlled quality. At first they are checked at the manufacturer at the factory, and then the peorators are controlled already upon arrival in the country of consumer.

For third countries, including peorators produced in Chinese factories, even factory control does not pass. But their quality does not decrease from this, but the price decreases by almost 2 3 times. And such a tool is not considered a fake.

If Chinese manufacturers can make Makita peorators under high quality license, then Makita 2450, 2470, you can’t say about the fakes of the tools.

By the way, it is worth telling about the so.called illegally imported power tools. Most often, illegally imported tools can be found according to the inscriptions on the nameplates fixed on the Makita 2450, 2470 peorators.

Makita and Asian consumers piles on the original inscription made in China there really a really tool for the manufacture of the tool and is located and is made qualitatively under the license

But the differences in the nameplates on the original body and fake Makita infantry

Nameplate on a fake and original

On the peorators Makita 2450, 2470 The power supply voltage is indicated by one number: 230 V. In addition, the HCN sign is applied to the consumer peorators, which does not have tools that are not intended for consumers, this is a sign of passing tool certification in the organs.

And how to distinguish the original Makita peorator from a fake?

Determine the fake of the Makita 2450, 2470 penetrator at external inspection. You just need to know what to especially pay attention to.

The low price of instruments of this class most often indicates for fake.

Makita peorators are not produced in the compositions of various sets.

Determination of fake during external inspection of the suitcase

The main differences begin when examining the appearance of the suitcase (case) for transporting and storing the Makita 2450, 2470 peorators, 2470.

The factory suitcase must have inscriptions made by embossing and having squeezed outs. In a fake case, the inscriptions are made in the form of a sticker or letters, manually glued. A fake inscription is easily destroyed by a fingernail.

The inscription on the case of the original

On the latches of the original case, the names of the tool with embossing, squeezing out the instrument. The fake peorator has such inscriptions on latches, as a rule.

Type of the latch on the original case and fake

During external inspection of the case for storing and transporting the peorator, carefully inspect the gaps between the lids of the suitcase. In the original suitcase, the gaps are either absent or have the same gap around the entire perimeter of the contacts of parts.

Original gaps and fakes

distinguish, makita, tool, fake, package

Inspect the back of the case. On the case of the original, the inscription of the word makita is necessarily applied white in depressed letters. Fake cases of such inscriptions do not have.

Determination of the fake during the external inspection of the case of the Makita 2450, 2470

By external inspection of the tool case, you can easily distinguish a fake from the original. The fake of the stator body color is more blue, while the original has more green.

The name on the case of the Makita 2450 peorator is applied by the original method. On the cover of the stator, the inscription is convex, on the cover of the rotor the inscription pressed.

The fake Makita 2450 inscription on the green case is glued and easily removed using the nail. And the inscription on the black case is generally absent.

Fake and original

The fake can be determined and examined by carefully the side handle of the Makita 2450 peorator. On the handle of the original at the site of the pen of the handle, the inscription is applied by pressing the method. The fake has no inscription on the side handle at all.

With a careful external inspection, pay attention to the casting of the plastic parts of the penetrator. The fake has a poor.quality casting, with torn edges, with traces.

Take a closer look at the icons in the area of ​​the mode switch. The original icon has convex and neat. The fake is given by an uneven and torn inscription made with obvious defects.

Original and fake the Makita infantry

In the original Makita 2470, the inscription was made by casting on the stator case and squeezing on the rotor housing.

The inscription on the fake Makita 2470 case is made in the form of a sticker, or made separately glued letters. This is easy to detect by pushing the edge of the sticker or letter with a fingernail.

An additional handle of the original Makita 2470 peorator is applied to two inscriptions. One by casting method, the second by extrusion method. Fakes are available without inscriptions at all.

distinguish, makita, tool, fake, package

There are original modorators of the Makita 2450, 2470 peorators, in which the inscription is applied on the green housing of the rotor, but under it the inscription made by squeezing is hidden under it.

Original and fake of the rotor body of the Makita peorator

The original Makita peorator on the side additional handle has two types of inscriptions. One inscription made of white plastic, the second inscription is applied by pressing. The inscription made of white is performed separately by the method of casting and already, then painted white. In fakes, the inscriptions on the side handle are completely absent.

Inscription on the handle of the original and the absence of it on a fake

Makita peorators are found, in which a self.adhesive sticker is glued to the housing. But if you look closely, then under the sticker the inscription Makita, executed by pressing.

How to distinguish the Makita gas.tool from a fake

Sellers of fakes are quite monotonous when it comes to drawing some famous brand before the treasured “4500” and “5200”. In pursuit of profit, they, without hesitation, invent obviously non.existent models “Stihl 5200” and “Husqvarna 5200”, practically not taking advantage of the possibility of creating a plausible name. One of these opportunities opens when using the Makita brand. Makita 5200 chainsaw was really present on the market. To be precise, this model was called Makita DCS5200i.

Makita DCS5200i chainsaw. Real

This chainsaw was sold (including several years ago, and then in the collection of motorcycle.RU fell several examples of fakes.

Makita 5200 chainsaws. fake, general view

This was sold through the announcement website in 2010. Everything is as usual. Typical saw, typical label, name of the model “5200”, indication “Made in. “And a mandatory reminder for” Profesional Tools “.

In the fall of 2010, the seller from he wanted 4500 for this saw. Yes, that time. in divine.

Makita 5200 chainsaws. fake, broken shield

This is already a copy of 2012. It’s nice to see that the corporate identity is designed. True, truth, withstanding the “corporate identity” in the market of such fakes is very rare. After all, even a chainsaw with a sticker is khuskvarna and yellow-white coloring under Stihl. And here the color of the case is one, and the stickers of the same species. the beauty.

However, for all this stability there are two indigenous differences.

Firstly, the 2012 model broke off the front shield.Secondly, the 2012 model cost 12,000.

TWELVE THOUSAND! For a chainsaw with a broken brake shield!! In Orenburg. Two years before, a man of only 4500 wanted.

Makita 5200 chainsaws. Fake, starter

And here we can only sympathize with the seller of this broken trash. He did not fall into the premium segment. At a time when his colleagues traded SAMS for the chainsaw of the Stihl MS660 and Husqvarna 372xp at least 30 thousand, he undertook to trade the backwater under the chainsaw of less than 15 thousand. That is how, despite the assurances of Oleg allegedly from the alleged Orenburg that “production of Japan, new. Professional, store

However, our hero found a way out of this firm situation. He called his chainsaw “Takida”. Yes, yes, so I wrote “Takida” instead of “Makita” in his ad.

Well, yes, yes, “Oleg from Orenburg” lowered the price to 9500. Perhaps he was lucky.

Makita 5200 chainsaws. Fake, protruding clutch cover

P.S. It seems that the crooked set of clutch is not the result of a breakdown, but a part of the proprietary style of the chainsaw Takida 5200.

How to distinguish the original products of Makita from a fake

When planning the purchase of power tools, almost everyone rely on the brand. The most famous and popular manufacturer is Makita. The Japanese company, which has been developing and producing a high.quality tool for many years. But only when I am going to purchase Makita products, you should turn to an official dealer or there is a high probability of running into a fake. Recently, the market is simply overwhelmed by a poor and even dangerous tool for humans.

MAKITA RAPID CHARGERS HAVE A HIDDEN FEATURE YOU DON’T KNOW!

Which Makita tool is faked

You can run into a fake any tool. However, most often peorators and drills. Such a tool is very in demand, so manufacturers of counterfeit goods are actively used by this.

All fakes can be divided into several conditional groups:

  • Illegal products. Imported by various illegal ways. The quality of such a tool is high, but, unfortunately, service for it will not be. You will have to pay for repairs from your
  • Products of partners’ enterprises. Produced under the marking of Makita, but in quality is significantly inferior. However, the price is quite attractive.
  • Frank fake. Highly extremely low, it is even dangerous to work, as there is a risk of injury.

What are the signs that you have a fake in front of you

People who have already worked as an original Makita power tool will calculate the fake without any problems. Here are just ordinary users can easily run into low.quality goods, you need to pay attention to the following points:

  • Price. The original Makita products cannot cost cheaply. If the price of the product is not decently low, then they offer a fake.
  • Manufacturer and marking. The company has plants in different countries. China, Japan, Romania, Great Britain. Also in the USA and Brazil, but from these countries products are not supplied to us. Regardless of the country of the manufacturer, the quality of the tool is not doubted, it is very high. Be sure to pay attention to the serial number. It should differ from such models.
  • Build quality. There should be no defects or other flaws on the case. In the manufacturing process, high.quality raw materials are used, so there should be no unpleasant odors.

If you want to acquire a branded power tool Makita, contact our company. We are an official supplier, sell the tool in bulk and retail, and our are guaranteed to be likely.

Buying rules

Makita is only necessary to purchase an electric screwdriver of Makita at specialized stores at a price set by the manufacturer, which can be found on the company’s website. This is the only way to buy the products of the Japanese brand, without doubting its origin. In other cases, it is necessary to make sure in accordance with the goods of the specified marking.

It is important to understand that high.quality things cannot be sold at too low prices. Therefore, you should not believe the sellers in the market and online services about the sale of warehouse or seasonal promotions that thus explain the low for the products of the brand Makita.

How to buy a copy of Makita

Any polishing tool is difficult to fake, so they are much cast from copies. The only safe way to purchase original products from a Japanese manufacturer is to visit a specialized store with a package of documents and permits. Also, an electric screwdriver cannot cost cheaper than the set price in the market even for shares.

Knowing buyer, first of all, is important the high.quality performance of the tasks for the power tool. For everyday use, it is necessary to purchase a high.quality peorator of a well.known manufacturer in an original box with a warranty life. Thus, you can not worry about the correct choice.

The main recommendation is the purchase of a household tool Makita through licensing outlets or Internet resources with many years of experience and positive reviews.

  • separate passports for the electrical screwdriver itself and on the charger;
  • quality certificate;
  • Operating manual in two languages: Russian, English.

Electric screwdriver Makita fake contains only instructions in English.

How to distinguish the original products of Makita from a fake

When planning the purchase of power tools, almost everyone rely on the brand. The most famous and popular manufacturer is Makita. The Japanese company, which has been developing and producing a high.quality tool for many years. But only when I am going to purchase Makita products, you should turn to an official dealer or there is a high probability of running into a fake. Recently, the market is simply overwhelmed by a poor and even dangerous tool for humans.

You can run into a fake any tool. However, most often peorators and drills. Such a tool is very in demand, so manufacturers of counterfeit goods are actively used by this.

All fakes can be divided into several conditional groups:

  • Illegal products. Imported by various illegal ways. The quality of such a tool is high, but, unfortunately, service for it will not be. You will have to pay for repairs from your
  • Products of partners’ enterprises. Produced under the marking of Makita, but in quality is significantly inferior. However, the price is quite attractive.
  • Frank fake. Highly extremely low, it is even dangerous to work, as there is a risk of injury.

What are the signs that you have a fake in front of you

People who have already worked as an original Makita power tool will calculate the fake without any problems. Here are just ordinary users can easily run into low.quality goods, you need to pay attention to the following points:

  • Price. The original Makita products cannot cost cheaply. If the price of the product is not decently low, then they offer a fake.
  • Manufacturer and marking. The company has plants in different countries. China, Japan, Romania, Great Britain. Also in the USA and Brazil, but from these countries products are not supplied to us. Regardless of the country of the manufacturer, the quality of the tool is not doubted, it is very high. Be sure to pay attention to the serial number. It should differ from such models.
  • Build quality. There should be no defects or other flaws on the case. In the manufacturing process, high.quality raw materials are used, so there should be no unpleasant odors.

If you want to acquire a branded power tool Makita, contact our company. We are an official supplier, sell the tool in bulk and retail, and our are guaranteed to be likely.

7 (495) 215-02-99

Makita-Snab@ 84952150299@

from 9:00 to 18:00 (Mon-Fri) from 9:00 to 15:00 (SB)

How to distinguish an electric screwdriver makita original from a fake

Japanese electrical appliances Makita. One of the most popular market brands. This is, of course, a good thing, since the leadership shows the high quality of the tools. However, there is also the reverse side in the coins. With the growing popularity of Makita, the number of cheap Chinese fakes increases sharply. Therefore, today we will talk about how Distinguish Original Japanese manufacturer Makita Corporation from a fake tool.

The main differences of the fake and the original Makita

Makita tried to protect his power tools. Therefore, even with the help of visual inspection, fake products are easy Distinguish

However, this must be done with maximum thoroughness.

The case when the power tool is supplied by Makita;

First of all, you should look more carefully at the container. The original and the fake are almost the same in color, but otherwise they can be too bright. In addition, you need to carefully consider the inscription of the brand. In the original, the name “Makita”. Embossing and letters.

In a fake case, the name of the company is reflected as a low.level sticker or manually glued. This is easy to check. They are simply torn off with a knife, fingernail. Therefore, buying any Makita tool, extremely carefully inspect the tool suitcase.

In addition, corps valves can give a fake. On original containers, they are a corporate name. “Makita”, and made of shine. Rivets on fake suitcases nameless and matte.

The gaps that are on the lid of the suitcase are also distinguished by the original and fake. Firstly, they can be completely absent or have the same shape. In the second case, gaps of different forms are made completely not high quality.

IMPORTANT! The backlash of the original is very high quality, without pollution. The fake cannot boast of this.

Close attention should be paid to the rear cover of the case. On the originals, the inscription of the brand “Makita” posted white letters. A fake suitcase does not contain this.

IMPORTANT! Opening the original, you will see that each part has its own production number.

When removing the tool from the case, you need to look at the sign with the device plate. This is a small table with labeling devices, the country of origin of Makita and other additional information. In fake, he literally “eats” his eyes that gives a fake tool.

The original has Makita inscriptions. Although fake is frank, she cuts her eyes bright red. Now by marking:

  • On real signs with signs, the serial number of the device is located next to the brand of the model. In fake locations of the production number below the table;
  • In these Makita devices, the table contains designations for use;
  • The Japanese manufacturer on original tools is indicated as the Makita Anji, Aichi Corporation, made in P.R.C. In fakes the last inscription is absent or has different letters. China, Malaysia.

IMPORTANT! Makita does not produce tools in the CIS. Original marking and countries where there are actually Makita factories:

As can be seen from the list, the original China affects otherwise.

Interest: now on the market you can find “gray” models of electrical appliances. They are original, but all the markings are on them. The main difference is that such Makita tools in the country were imported illegally. Even despite their authenticity, these models are not supported by the manufacturer. Therefore, there will be no warranty repair.

Now you need to carefully look at the inscription not in the table, but on the tool itself. As in the case, the original device wears the proprietary brand Makita with embossed capital.

Read Makita 042016 9a Lubricant for gearboxes Corner grinder

The color of the case of the device is greener for the original, and blue. For fake. over, in the latter there is no inscription of the manufacturer on a black basis, the original. it.

You should also pay attention to the quality of the plastic parts of the device. In the original, they are made of high.quality, uniform shape, casting of fake components immediately catches the eye. The traces burst, poor.quality region.

For example, in the original Makita swing hammers, additional devices have several inscriptions. One is made by a retreat, and the second. White. Fake do not contain letters at all.

IMPORTANT! There are such “Makita” models that have a sticker on the body. However, if you tear it off, then there will be a retreat of Makita under it.

Makita fake or original

The video tells how to distinguish peoratormakita original offering. Where to pay attention.

Many probably saw in one store two very similar products of the originally, which has a monotonous packaging all external visible signs.

Only now the cost of these products is sharply different. That exists, that there is one product of branded and one of the same product fake. Only now the company complies with our client remains norms for the quality of production of the product, and the fake company tries to focus only on the external signs of the product, so that it is very similar to the original, then judge the quality of this product yourself.From the fakes made under the Makita brand, I would like to mention some names, these are Makita products

The main difference between the fake and the original is not a secret value. The price of fake Makita products is lower than that of the original, and the client must “fall on this fishing rod” at first, there are no teeth, for which it is simple if there are no differences? However, how annoying it would not sound, it is not at all like. A poorly manufactured product you have purchased at the least cost will be very soon disappointed, and the equipment will quickly fail, you will have to take new products for you, and in the end you pay you as simple as it is simple than if you first purchased a unique product from the company- manufacturer. Therefore, think for yourself, you should save as.

Also on some fake goods under Makita, special marking labels are incorrectly attached. Initially, the client will not even direct attention to the correct marking, but for example, in the product Makita 5704r

How to distinguish a fake makita saw

How to distinguish a fake makita saw

Fake screwdrivers, drills, peorators, corner grinder, saws with Avito 0.

A lot of fake tools are sold on Avito. Copies from China, very similar to the original tool and terrible quality, and yet they are given trifles that are immediately visible.

Bosch does not have such a model at all and only one speed

2) began to import fakes of the screwdrivers Dewolt

While the fakes are very rude and you can immediately distinguish from the originals by voltage of the battery, according to the case, by charger and by the cartridge

Fake screwdrivers, drills, peorators, corner grinder, saws with Avito 9.

A lot of fake tools are sold on Avito. Copies from China, very similar to the original tool and terrible quality, and yet they are given trifles that are immediately visible.

1) electric drill Makita HP1630 fake, this is understandable by the nameplate, which indicates that it is made in Japan, and the serial number speaks of something else, the Chinese cartridge is the cheapest

2) the jack of Makita HM 1304 fake, again a nameplate with Japan, in accessories Chinese lubricant and Chinese peaks, documents are not in Russian, etc

Fake screwdrivers, drills, peorators, corner grinder, saws with Avito 8.

A lot of fake tools are sold on Avito. Copies from China, very similar to the original tool and terrible quality, and yet they are given trifles that are immediately visible.

There is no serial number on the nameplate, the box is not in Russian, the original one looks different in general

2) Grinding angle Makita PC1100 fake, serial number is also not on the nameplate

3) Bosch fake lobe, in general, Bosch does not have such a type of jigsaw

Fake screwdrivers, drills, peorators, corner grinder, saws with Avito 7.

A lot of fake tools are sold on Avito. Copies from China, very similar to the original tool and terrible quality, and yet they are given trifles that are immediately visible.

1) Electric screwdriver Makita DF331D fake, immediately clear by charging, case, voltage indicated to the battery,

2) Circular saw Makita HS7000 fake, it is immediately clear by the nameplate, there is no serial number, it is indicated what was done in Japan, although the original is made in China, there is no Makita inscription on the saw disk, a box without ruso inscriptions.

3) Makita 4304 600W’s electrical jigsaw, the original jigsaw is not produced for a long time, its power is not 600watt, the nameplate is also not correctly filled

Fake screwdrivers, drills, penetrators, corner grinder, saws with Avito 6.

A lot of fake tools are sold on Avito. Copies from China, very similar to the original tool and terrible quality, and yet they are given trifles that are immediately visible.

  • Starter case, it is clearly different from the original;
  • Covers of oil and fuel tanks, in the original saw they are made under a combined screwdriver, which should be supplied with a saw. In the Chinese version, convex and unpretentious covers;
  • The air filter cover, the screw of which is located on top, and not on the back, like the real Stihl 660;
  • Included with an original saw, a proprietary operating instructions are always supplied.
  • The colors of the fake, although they imitate genuine, is still not so bright and beautiful.
  • Cheaper 70tr is new. This is definitely a fake

In the photo comparison at the top, the original, below the Chinese fake

Fake screwdrivers, drills, peorators, corner grinder, saws with Avito 5.

A lot of fake tools are sold on Avito. Copies from China, very similar to the original tool and terrible quality, and yet they are given trifles that are immediately visible.

1) Electric screwdriver Makita DF457 dwe fake

This is understandable in charge, the voltage of the battery is 18 volts and not 24, another cartridge, etc

2) chain electric saw Makita 5016b fake

Fake Makita Impact Better? Let’s find out! Makita XWT11Z 18V LXT Lithium-Ion Brushless Cordless

Saw has not been produced by makita for a long time, but the Chinese still fake

3) tape grinder Makita 9403 craft

You can distinguish by namede, according to the case (the original in the box is simple) and other little things

Fake screwdrivers, drills, peorators, corner grinder, saws with Avito 4.

A lot of fake tools are sold on Avito. Copies from China, very similar to the original tool and terrible quality, and yet they are given trifles that are immediately visible.

1) Bosch GSB-13re drill in the case fake

It is immediately clear that this is a fake according to the case, rubber pads, nameplate, etc.

2) Makita Electric Right Model MT191 Fake

The original rubbish should be red in general https: // www.Makitapro.ru/rubanok-maktec-by-makita-MT191-I5885.HTML

3) Electric rubbish makita kp0800 fake

The original can be distinguished by clumsy inscriptions, the color of the handle of the other, it is made not in Japan but in China

Makita tool: how to distinguish the original from a fake

Especially cynical manufacturers of fake products are trying to sell counterfeit at the cost of the original. In order not to become a victim of deception, you need to study all the known signs of fakes. These include not only the lack of “Makita” inscription on the handle, but also, for example, a nameplate glued in an inverted form. Small, but very significant details help to quickly find a fake.

In order not to study the entire long list of context differences from original products, you should adhere to only one recommendation. to purchase tools exclusively from the official dealers of the Makita brand, one of which is the Minimax company.

According to statistics, scammers most often make fakes of the most popular Makita tools. Let’s go on this list.

How to distinguish the original from a fake Makita UC4030A

In the first place among the fakes were the makita drill-spaces of the DF330DWE series, which have proven themselves in work. The first sign of fake: the manufacturer produces original models with a capacity of 10.8 c, and in counterfeit this indicator is designed for 12 in. Despite a lot of differences in batteries and chargers of the original from fake, for a month hundreds of buyers purchase fake products. According to those who tested such an instrument “in business”, its quality is so low that the service life does not exceed two weeks.

How to distinguish a fake tool from the original

It is worth starting with the fact that Makita is a Japanese brand. Initially, all equipment was imported from this country. It is believed that the real Makita is produced only there. This is not quite.

By 2021, the production and assembly of the tool was established in different countries: China, USA, Germany, Great Britain, Romania and, in fact, in Japan. The CIS countries get the products mainly of the Chinese assembly. But this does not mean that this tool is different in quality. Chinese factories work in line with all the standards and certificates that the head office in Japan issues.

What cannot be said about their brothers. shadow Chinese factories operating a artisanal method. They rivet Makita without observing production processes. The main thing is that there is an external resemblance, and how the tool will work is the last business.

There are a lot of fakes on the market. And the most unpleasant thing is that they are practically no different in price. However, it is possible to determine the falsification. To do this, take a closer look at the little things.

First, consider the case

  • The real box has an even structure. A plastic container has no burrs or influx. The color is even. Case shade is dark gray, with a light blue tint or dark green. A fake box is brighter, although similar in shade. On the original case, the letters “Makita” are made by embossing, and not just drawn. Often on a fake container, the name of the brand has the form of a sticker. It is easily removed with a knife or other sharp object.
  • Zapels. On the corporate case, the container latches are even, without influx and plastic burrs. On the back there is an inscription “Makita” in the form of embossing. over, the name is even and glossy, and the latch itself is matte.
  • Gaps on the box. The original case has even gaps around the entire perimeter. Either they are not at all. The cover has practically no backlash. It opens easily and closes.
  • Schildik of the device. Pay attention to the labeling of the tool. In the original “Makita” it is made in a calm orange color, and does not hit the eyes. Fake nameplate is very bright. In a thrown red color. Another difference is serial number. In this tool, it is indicated next to the model, in the upper part of the table. At the fake. in the lower left corner. Pay attention to certification. There is a mark “Ce” on this tool. The last important element on the nameplate is the country manufacturer. The original should have an inscription: Makita Corporation Anji, Aichi, Made in P.R.C.
  • Tool case. The real case is painted in a blue or turquoise shade. The fake burns to the green tone. The inscription “Makita” in the original is also performed by embossing. True, there is a reservation here. On some models of the brand on the case there is a sticker with the name, but under it there is always a duplicate inscription in the form of squeezed letters. The real tool is nice to hold in your hands. There is no overwhelming, influx or other plastic casting defects on the case.
  • Handle or other elements of equipment. On such elements, the name “makita” is also presented by extrusion method. Sometimes the letters are painted white. For example, on an additional penis. If we are talking about the main handle, then it should be with the rubberized part from the back. In fake it is painted black.

The easiest way not to run into a fake tool is to buy equipment from an official dealer or distributor. The full list of retail points of sales can be viewed on the official page of the site “Makita” in if you live in a small city, it is better to take a tool in the online store. And never buy a “real” Makita from unknown persons in parking lots, near large shopping centers at a similar price. With a probability of 99%, you will buy a fake.

Makita fakes

Dear customers, we want to inform you that fake Makita tools appeared on the market that have nothing to do with the products of our company.

Mi we want to explain several distinctive features of these tools by which you can recognize a fake. On the current day we have information about three models is 5704R, HR2450 and 9069.

Here is a fake circular saw 5704r
The original case is on the left, and fake on the right, on a fake saw, the nameplate is glued upside down.
There is a Makita inscription on the original handle, but it does not have a fake.
On the right on the fake anchor is a very rough and not even balancing, there is also a pouring anchor with a blue varnish, which Makita never had. Brushing holders also have a difference on fake them, they are glossy, t.e. shiny and slightly different shape. There is no designation 303 on fake brushes, such brushes are placed on this model.
There are no inscriptions on the fake impeller, but on the original there is.
In this photo, a fake peorator HR 2450. Visually, everything is the same, but you can immediately pay attention to a non.standard cable, we never had such a fork with an additional elastic band. On the original oorater, a rubberized handle, and on a fake, is simply black plastic black.
There is no CE icon on the nameplate, which also does not comply with European standards.
On the nameplate under the button there is no year manufacturing tool. We have two such peorators and all of the same serial number 0093508 Y
The wires of the switch should be of different colors, and on the fake they are white. There are no designations on coal brushes.
The barrel is not even polished after milling.
The anchor is also fake, we never had such a balancing.
The drummer has a rubber ring of green color, while we have all black rings. With a more detailed examination, you can notice that all the nodes in this fake are copied very roughly and do not correspond to our quality.

Recently, a fake Makita tool, assembled in the market, has appeared in the markets, we report: Makita is not going to!

ATTENTION. These fakes will not be served in the warranty and post.warranty service centers of Makita, while each authorized service center of Makita has the right to submit the injured party in writing that this product is a fake for further proceeding with the supplier.

| Denial of responsibility | Contacts |RSS