How to wear a trimmer belt for grass correctly

Working a trimmer is much more convenient and easier to use a special belt. Thanks to him, the operator can mow large sections of grass without pain in joints and muscles for several hours in a row. The design of the biceps belt is designed so that the lawn mower is kept using the mounts itself. Without the help of hands. She will only need to set the direction, and she will do everything else herself. About how to correctly attach a belt to a trimmer and set it up for yourself to facilitate the load, and it will be discussed in this material.

Many models of trimmers are equipped with an ordinary oblique belt. However, for work, it is best to purchase a rug belt, which is specially designed for motorcycle. Thanks to a thought.Out design, it evenly distributes the weight of the device for the whole body. The shoulders with a soft lining reduce the severity and relieve pain in the forearms. The hard back disperses the load between the upper and lower backs, excluding the lower back. The impact.Resistant protection for the thigh prevents the contact of motorcycles with the foot so that it does not rub and transmit vibration. In addition, the belt provides:

  • Convenient transportation of a trimmer for grass;
  • Comfort during operation due to the ergonomicity of the spit position for grass relative to the body;
  • Safety in work. The paraphernal belt prevents the slipping of motorcycles from the hands at the time of the stabs of hard objects.

Trimmer for grass. How to choose a device?

The casing is a plastic lining that protects the operator from the fishing line or knife, dust and garbage. It is mounted in the lower part of the motorcycle, immediately behind the gearbox. For a fixed fixation of the casing, a bolted connection is used.

As a result of prolonged use of motorcycles in areas with large stones, its full.Time casing may break. To choose a new device, the owner of a trimmer for grass will need to adhere to a number of rules.

  • Material. It is best to choose a casing made of multi.Layer plastic. The product should have 2-3 stiffeners, which give it strength and stability before blows;
  • The mounting method. A good option would be to buy a casing with a threaded mount. There are also products with clamps on sale. The latter may fail at the slightest fall, as a result of which the operator will have to restore the mount with their own hands;
  • Width. The wider the casing, the more reliable it will protect the legs and hands of the operator. The standard dimensions of the device are 35 cm in width and 17–20 cm in height.

Motorcycles for Short Riders. Tips and Tricks

When buying a protective casing, you also need to take into account its manufacturer. The most reliable devices are the products of brands Makita, STIHL and Bosch.

How to use a trimmer correctly

Garden trimmers for grass are effective. Newchers think that it is easy to work with a lawn mower, because you just need to include it in a socket or pour fuel, but this is not entirely like that.

The efficiency of the garden tool and its service life directly depend on operating conditions. Therefore, before using a trimmer for grass, you need to perform preparatory work.

The lawn with which you need to mow the grass is carefully examined. Be sure to remove glass and large stones. Having flew out from under a working mower, they can injure a person. They remove the wire from the lawn, because it can be wound on a rotating element, break a mower.

After that they move to the installation of the cutting system. There are trimmers for low.Power grass on sale, which use only a fishing line for a trimmer. It is designed for mowing juicy and soft grass. But there are models with a capacity of more than 1 kilowatts on which metal knives are installed. They cut sowing and other hard weeds, trim the young shrub.

In order to replace the cord with knives, you need to unscrew the mounting nut, install the cutting element. Then the nut must be returned to the place, tighten it with the key.

The operator must take care of his safety. Mow grass in tight protective clothes. Special glasses are used to protect the eyes, they will protect from dust, grass and flying garbage. Hands are covered with gloves.

The electric trimmer for the grass is included in the network, and the battery models are charged for several hours before starting operation. Fuel is poured into a gasoline mower.

The mower is kept so that the spool or knife is located parallel to the ground. When the tool is installed in the correct position, the motor is included. After the grass is bewildered, the mower is turned off.

How to cut the lawn so that it turns out to be even

So that the grass on the lawn is trimmed evenly, it is necessary to lower the mower as low as possible during operation. The site must be divided into squares. You need to work, moving clockwise. In this case, the hay will always lie on the left without interfering under the feet.

See also  How to wear a belt on the lawnmower

How to wear a belt

If the tool has a shoulder mount, before starting work it hangs on the shoulder. The trimmer for the grass is fixed on both shoulders if it has a backbone mount.

The model with a bicycle handle is held with 2 hands, the D-shaped handle is wrapped in palm. The belt must be worn so that it is convenient, then the back will not get tired.

How to refuel a benzotrimer

Motokos working on gasoline are with two.Stroke and four.Stroke engines. The first option is much more common. What are the differences between them:

In trimmers with a 2-tact engine, the response to press the inclusion lever is faster (for this reason the lawn mower is mainly equipped with this type of engine); A tool with a two.Stroke engine will be much easier, as well as easier to maintain; Fuel consumption in a two-stroke engine is higher than in a 4-stroke with a similar power by about 30%; The 4x-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not thrown into the atmosphere, as well as its noise level is much lower; And the most important distinguishing feature is the refueling: a 2x-stroke engine is equipped with one common tank, where gasoline mixed with butter is poured; 4x-tacte has a separate gas tank and a tank for motor oil.

For refueling, it is necessary to use fresh gasoline AI-92 or AI-95 and high-quality motor oil for garden equipment (for 2x- and 4-tact engines, manufacturers produce different oil). Oil can be used mineral, semi.Synthetic or synthetic.

The proportion of gasoline and oil for trimmers with a 2x-tact engine can be found from the instructions for a specific model. Usually it is 50: 1, in some cases, proportions of 25: 1 or 40: 1 are recommended. Prepare the fuel mixture in a separate container with accurate observance of proportions. Never pour the liquids “by eye” directly into the tank without mixing them in advance. Detailed instructions for mixing a benzomalam, with video and description, can be found on our website here.

We run up a gasoline trimmer for grass

In most cases, the running.In is used in a motorcycle (trimmer for gasoline grass). The running.In is the operation of the motor at low speeds, without loads. In order to run, you need to start a motorcycle and let it work at idle. The most ideal of all the 1st mowing is made with fishing line, because when mowing lawn grass, the highest high load on the engine is expected than when working with hay or shrubs.

Do not produce the entire temporary resource at the first launch of the motor. The most ideal after work at idle will be mowed the lawn for 10-15 minutes, after which drown out the device and let it cool little. Use a motorcycle system neatly, without sudden movements, to avoid collisions with hard objects (stones). The stab on the stone can poorly affect the work of the unfortunate nodes. In some cases, backlash occur, noise and roar during operation. This can simply be avoided if the trimmer for the grass is correctly running.

Gasoline unit

In the case of a gasoline trimmer, you need to check the gearbox for lubrication. Also, do not forget to add lubricants to the fuel tank, if an annotation for operation reads about this. Usually, gasoline and oil are connected in a ratio of 45 to 1, but these characteristics can vary depending on the model and manufacturer, so that you should closely study all technical requirements for the device. The fuel container must be filled on the very neck. If all the technical waters are flooded, then you can experience the device. But it’s not worth mowing right away, it will be better to let the trimmer work without load so that the engine is engaged in a flooded combustible. A few minutes will be enough, after which you can give the motorcycle full load.

Elektokos

With an electronic trimmer is still easier. After making sure that the gearbox has the right amount of lithol, you can start work. No additional measures will be needed. Unless you need to make sure that the carrying does not run in the path of mowing, so as to avoid probable damage.

When the device itself is ready to work, you should make sure that there is nothing around that could interfere with the work. By ability, the estimated mowing area should be cleared of snags, glass, pebbles and other hard objects that can destroy a knife or a fishing line for a trimmer.

Depending on the upcoming work, it is necessary to choose a nozzle for a trimmer for grass: a screw-knife for weeds and hay, a fishing line for a trimmer for a lawn grass or a disk saw for shrubs. Mowing should be in the opposite direction from people, if possible, moving away from buildings and buildings. You should not very closely approach the fence and other designs, because the fishing line for a trimmer can catch on sharp edges, and the screw-knife will bend if it offends them a hard object.

The preparation of the device itself will not take much time, all modern models of devices are designed to facilitate and simplify their operation, starting to work in a very short time.

belt, motorcycles, hook, height, adjustment

Safety regulations

Among the safest and most popular trimmers, the products of German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that, when using a trimmer for grass, you need to clearly know and observe

See also  What you can make from an electric screwdriver battery

If there are questions about the adjustment on a rug belt of a particular model of motorcycles, the answers can be tried to find in the operating manual attached to the products, or watch a video on the Internet, where it is clearly and accessible how to set up and adjust the belt along with a gas station.

How to correctly configure a belt of a lawn mower for yourself

Service centers often complain about consumers of household garden equipment, who still make mistakes at the stage of its assembly and the first launch and disable equipment. Of course, there is an instruction in the package, but either it is stupidly written, or it is read after the wrong assembly, when unnecessary details were found or, worse, a breakdown occurred. Meanwhile, there is nothing complicated in the assembly of household garden equipment. You just need to be careful. Let us give an example the procedure for assembling the Stihl FS 130 lawn mower, complementing our instructions with illustrations.

You need to start the assembly with the fact that open the box and check the package of the unit. If everything is in place, then we have to put the handle to the bar with the motor, put on the belt, attach a protective casing and cutting elements.

First you need to get the handle and unscrew the barbar, which attaches the upper part of the support, without giving up the springs.

We insert the handle into the nest and fix it without tightening it. We adjust the final position after the final assembly of the lawn mower.

We put on the control knob on the handle tube and tighten the mounting bolt. For this, the kit has a universal key.

All stihl fs gas troops are located on the handle. This is: a gas lever that protects against random turned on and the lever of turning off the unit, which is controlled by the thumb. At the modification, motokos with a D-shaped handle are located next to the engine on the bar.

Put a plastic protective casing. If it is planned to use only a knife, then for its operation we use part of the casing (in the picture it is painted with orange).

If the cutting fishing line is working, then a plastic skirt is additionally put on a protective casing and a knife is placed for cutting a fishing line. In some varieties of this model, the casing can be universal or two different casings are attached to the fishing line and the other for a knife.

Putting the skirt on the casing, you need to check the reliability of its fastening. Sometimes it may be necessary to fix this protection with another screw.

Now you need to put a knife for cutting fishing line and fix it with a screw.

It remains to install the coil, having previously tucked it with a fishing line. The coil is wound on the shaft (as in the illustration) or attached with a special nut. Keep in mind that the thread on the shaft is usually the left. How to refuel a fishing line for a trimmer to a coil read in the instructions.

If a knife is required, then instead of a coil we put it. The knife is equipped with a protective lid so that during operation it does not bury into the soil. After installing it, do not forget to scroll through this cutting element and make sure that there is no backlash.

Well, the last, the easiest, stage installation on the bar of a metal clamp, t.E. Suspension belt mounts.

After the lawn mower is assembled, we put on a shoulder belt or a belt parallel suspension (depending on what is given in the kit) and drive them according to the figure. Pour the gasoline mixture, start the engine and go.

Fresh Комментарии и мнения владельцев. Grass trimmer belt. How to adjust Range Grass trimmer belt

Adjust the height of the hook of the smynet belt of the trimmer for the grass with a handle of the shoulder straps so that the trimmer knife lowered to the ground is located parallel to the surface of the site (strictly horizontally). When working with a saw trimmer disk, adjust the grass The height of the hook (with a lift of the shoulder belts) so that the sawy disk of the trimmer for the grass is tilted slightly forward relative to the surface of the earth.

Rare Body Features Only 1% of People Have

Moving the ear for hanging braids for grass on a trimmer belt for the grass forward or backward, equalize the trimmer for the grass so that when the steering wheel is released, the trimmer knife for the grass is near the very surface of the site, but does not go to the grass. For sawing bushes and young trees, a trimmer for the grass with a saw drive of a bureau for the grass should be equalized so that when the steering wheel is released, the car hung on the hook horizontally land. Attach.

Adjust the shoulder belts of a trimmer for grass (braids) so that the load is distributed evenly on the shoulders (check by pressing the handle of the trimmer for the grass on the hook on the hook).

The video pro Range Husqvarna grass trimmer belt. On the design features of the belt suspension (harness), which facilitate and make a more safe mowing with a motorcycle, a trimmer, a benzocosa, a Husqvarna bush and an elastic belt, quickly unfastened locks (carabiners) in case of fire or any other situation requiring a quick release from Trimmer for grass. On the universality of belts for men and women.

Such Range belts of a trimmer for grass from Husqvarna (Balance 35/55, Balance X, Balance XT) can be used on any trimmers, benzocoses, motorcycles, electric cosecs, and bureaus.

See also  How to distinguish a fake of the punch Bosch. Start with an official site

What is a rug belt

It should be understood that the weight of the seasoned motorcycles is an average of 6-9 kg. And this device must be kept in a limited state all the time. To evenly distribute the load, the backpack belt, as it were, encircles the body from all sides. The main load falls on the shoulders and back, so its upper part is complemented by wide foam inserts and tissue straps. Further belts are lowered along the body and with the help of a quick.Sitting clip are connected to each other in the area of ​​the chest or abdomen. And so that when loading, the belt does not crash into the body, a wide and durable lining is provided. Plastic protection for the legs is attached to the belt. It has a carbine for attaching to a trimmer and depreciation in the form of a spring. The ease of unfastening and fastening the motorcycles is ensured by a rapidly latent latch located on top.

On a note! Different models of the paramedic belts can differ among themselves by the design of locks, carbines, the presence or absence of additional linings and latches. However, the principle of the device and operation is the same.

belt, motorcycles, hook, height, adjustment

Bowling braids for grass by moving the ears

After fixing the necessary heights under yourself, you need to balance the trimmer for the grass. To do this, the ear is rearranged, with which the device is suspended to the belt, forward or backward. As a result, you need to attach the belt to the trimmer so that when the steering wheel is released, the knife or saw disk does not lie on the ground, but hung above it without touching the surface. At what distance will it be dependent on the goals set.

Advice! The distance above the ground at 20-30 cm is suitable for beating high grass, and for lawns you need 5-10 cm.

Balancing pens

An important stage in the configuration of a ranger belt is also adjusting the handles to the optimal level. When the operator holds the motorcycle, his hands should be relaxed, and the shoulders are parallel to the body. Therefore, after fitting a biceps belt, the two.Handed mechanism should be adjusted by moving it up or down. It is necessary to achieve such a result that the hands only set the direction, and not hold the device. If after that the balancing of the trimmer for grass is again violated, then you will have to re.Repeat all the stages.

belt, motorcycles, hook, height, adjustment

A rug belt for a trimmer for grass-purpose

Many models of trimmers are equipped with an ordinary oblique belt. However, for work, it is best to purchase a rug belt, which is specially designed for motorcycle. Thanks to a thought.Out design, it evenly distributes the weight of the device for the whole body. The shoulders with a soft lining reduce the severity and relieve pain in the forearms. The hard back disperses the load between the upper and lower backs, excluding the lower back. The impact.Resistant protection for the thigh prevents the contact of motorcycles with the foot so that it does not rub and transmit vibration. In addition, the belt provides:

  • Convenient transportation of a trimmer for grass;
  • Comfort during operation due to the ergonomicity of the spit position for grass relative to the body;
  • Safety in work. The paraphernal belt prevents the slipping of motorcycles from the hands at the time of the stabs of hard objects.

Adjusting shoulder belts

So that the load is distributed evenly on the shoulders and back, you need to adjust the shoulder belts well. To do this, just tighten or relax the straps. They should not dig into the body or hang. You can understand how the weight will be dispersed, if you press with your own hands on a hook for suspension braids for grass.

Safety regulations

Among the safest and most popular trimmers, the products of German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that, when using a trimmer for grass, you need to clearly know and observe.

  • Before use, you must familiarize yourself with the instruction manual.
  • You can not work with a trimmer in a state of fatigue, illness, intoxication.
  • It is forbidden to use a braid in explosive and fire hazardous areas.
  • You can not mow during a thunderstorm and rain, as well as after the rain, when the grass is wet.
  • You can only work in daylight hours, in conditions of good illumination.
  • Only the type of fuel and lubricant, which is suitable for a specific model of a trimmer for grass, should be used.
  • It is not recommended to independently repair the tool.
  • Do not touch rotating or heated elements during operation.
  • You can not smoke and make fire in the process of mowing and t.D.

Important! When operating a trimmer for grass, there are other factors harmful to health: increased noise, vibration, exhaust gases, high temperature of some parts, flying branches, etc. To minimize risks, you need to use overalls, glasses and headphones.

If there are questions about the adjustment on a rug belt of a particular model of motorcycles, the answers can be tried to find in the operating manual attached to the products, or watch a video on the Internet, where it is clearly and accessible how to set up and adjust the belt along with a gas station.

| Denial of responsibility | Contacts |RSS