Electric lawn mowers: device, operation, malfunctions

An electric lawn mower is a complex tool, so it is very important to properly use and maintain it.

Incorrect maintenance or use can lead not only to serious damage to the mower, but also to injuries.

The general rules of safe use are the same for all lawnmands, however, there are nuances applicable only to certain types of these devices.

The information that you find in this article cannot fully replace the user’s management of a particular model, however, it will give a general idea of ​​the proper use of electric lawn mowers, including their maintenance and repair.

  • What is the device of the electric municipal mower;
  • How to use it correctly: how to turn on, how to mow a lawn;
  • how to serve: disassemble, sharpen a knife, whether it is possible to wash with water, mow wet grass, how to store;
  • The most frequent malfunctions: it does not turn on, stopped working, smoked and what causes may be;
  • Other nuances of the operation of these devices.

How electric lawn mowers are arranged

The general layout of electric lawn mowers is the same.

An electric motor is installed on the wheel chassis, directly or through the belt gear, a rotating cutting tool that cuts the grass at a certain height.

However, despite the general principle of work, all braids are divided into types of:

Type of chassis

Most lawn mowers are equipped with a four.wheeled chassis with a rigidly fixed axis of the front wheels, so for rotation, especially during the mowing of grass, it is necessary to press a little on the handle to tear the front wheels from the ground.

Indeed, during the turn, the direction of movement of the apparatus and the direction of rotation of the wheels do not coincide, which is why the latter resist the side movement, and the cooler the turn, the stronger they resist the movement.

Some models are equipped with front piano wheels, the axis of which does not have rigid fixation, so that the axis of their rotation clearly follows the trajectory of the lawn mowing, therefore, regardless of the steepness of the turn, they never move sideways.

electric, lawn, mower, stavr, combi

Almost all three.wheeled lawn mowers are equipped with front piano wheels, so it is much easier to control them than four.wheeled. However, the most maneuverable are two.wheeled models, because regardless of the steepness of the rotation of their wheels never move sideways.

engine’s type

Collector and asynchronous motors of alternating current are installed on electric lawn mowers.

The former have somewhat smaller efficiency, but it is much easier to perceive high loads or overloads, the latter more effectively turn electrical energy into rotation of the shaft, but greatly increase the cost of the apparatus.

This is caused by both the highest cost of collector engines, and the need to protect them using belt transmission. The main difference between collector engines is the presence of contacts (collectors), therefore they are sometimes called collector engines, confusing with direct current motors.

Devices with a collector engine are well suited for mowing lawns and other territories planted with cultural vegetation, however, their use in areas overgrown with wild grass, especially tall and thick, is undesirable.

After all, such vegetation sharply increases the load on the engine windings and the brushes of collectors, as well as on the details of the belt transmission, all this leads to a rapid decrease in their resource. Asynchronous engines are deprived of this drawback, however, when working with them, it is necessary to use different methods of mowing well.groomed and high grass.

Type of cutting tools

The vast majority of the devices are equipped with a rotary cutting tool, that is, knives mounted on the engine shaft, which rotating, cut the grass and throw it through the side or rear window. During the rotation, such a knife is created by a vertically directed air flow that raises crushed grass and provides an even surface after mowing.

To some extent, the rotor cutting mechanisms can also be attributed to fox, which are installed on wheeled trimmers for the grass, only instead of a metal knife they cut the grass dispersed to huge speeds with a fishing line.

Timelapse Assembly Stiga Akku Lawnmower/Grasscutter Combi 48 SQ DAE in less than 10 minutes

The main drawback of the knives of the rotary mechanisms is their vulnerability before solid obstacles, because rotating at high speed, they stock up enormous kinetic energy. Therefore, in a collision with an obstacle, not only defects of the cutting edge appear, but also the shape of the knife is often disturbed, due to which an imbalance appears, leading to strong vibration during engine operation.

Part of the lawn mower is equipped with a drum cutting mechanism, which is a hollow drum of steel plates, as well as a sharply.mounted knife operating on the principle of scissors.

The rotating drum captures the grass and leads it to the knife, which cuts vegetation, so such a mechanism is deprived of the main lack of rotary analogues. After all, the speed of rotation of the drum is much lower, which means that the energy accumulated in it is not enough to damage the plates, in addition, the knife does not contact obstacles at all, so defects do not appear on its cutting edge.

Method of ejection and processing of grass

The knife rotating at high speed not only cuts off the grass, but also gives it acceleration, so that the centrifugal force presses the cut vegetation to the deck, so it flies through the rear or side window, depending on the configuration and the operating mode of the mower.

If both holes are closed, then the cut grass passes between the ends of the knife and the walls of the deck, after which it falls down.

When working in this mode, falling fragments are quite large, comparable to those that fly through the windows provided for this.

If, together with a regular knife, set additional (mulching), then the size of the grass falling to the ground will be reduced several times, so this mode of operation is called mulching. All rotary braids can not only throw the grass back, but also collect it in the grass collector, this mode is in demand where for any reason you can not leave mowed vegetation on the site.

Drum mowers work a little differently. rotating, the drum accelerates the fragments of cut vegetation inside it, which are pressed to the tightly adjacent gas mowing housing. Therefore, at the time of passage through the output window, they fly out under the influence of centrifugal force.

All drum braids are equipped only with the rear emission, however, part of them includes a grass collector, so such models can be used not only for haircuts, but also to remove mowed grass from the site.

Way to travel

All electric lawns, regardless of the type of cutting mechanism, are divided into self.propelled and non.self.propelled. The former is equipped with a clutch and belt transmission, as well as a gearbox that lower the speed of rotation of the engine to the optimal level for wheels.

How to start a lawn mower properly?

Regardless of the type of action, there is a strict order that must be observed, that is:

Inspection and verification

Any trimmer malfunction for grass can be a serious danger.

Poorly tightened bolts fixing the clutch bell to the engine can lead to rapid abrasion of clutch pads, and any leak of the fuel system often leads to ignition and burns or fire.

The weak tightening of the gearbox bolts can lead to the fact that the rush shaft bar will jump out of it and the trimmer for the grass will stop working. Weak tightening of bolts fixing the handles can lead to involuntary lowering the shaft and damage to the cutting tool.

Therefore, before any launch, you need to at least briefly inspect the device in search of defects. This is especially true for any first launch, it does not matter, after the purchase, or after storage. During the working starts, it is permissible to inspect only the fuel system for leaks.

One of the most important stages of verification before any launch is to determine the amount of lubricant in gearboxes and a drive shaft, for which you need to disassemble a trimmer for grass and remove both gearboxes from the shaft.

So you will evaluate the quantity and condition of the lubricant not only from the side of the gas station, but also in the area of ​​contact of the shaft bar with the gear of the gearbox.

Also, once every 2-3 weeks, check the amount and condition of the oil filled into the crankcase of four.stroke engines, if the device will work with a low level of oil for a long time, then the probability of jamming of the crankshaft is likely.

The gas station is fuel

This operation has to be done after purchasing and winter storage, as well as during the termination of work caused by the production of gasoline. Four-stroke engines are seasoned with pure AI-92 gasoline, and two-stroke with a mixture of fuel and special oil, which we talked about here.

Remember, if you refuel a two.stroke trimmer for grass after winter storage, be sure to drain the old fuel from it, because it has already lost the lubricant, so the crankshaft bearing and cylinder.piston group will work without lubrication.

Launching a benzotrimer

Regardless of the type of launch, there are 6 actions that have to be performed always:

  • fuel pumping;
  • the transfer of the air damper to the “Launch” position (“Closed”, “OFF”);
  • the transfer of the switch to the “inclusive” position (“VCL”, “on”);
  • pressing and fixing the gas key;
  • the jerk of the starter cable with the choice of free move;
  • transfer of the air damper to the “work” position (“open”, “on”).

The first 3 points from this list can be performed in any sequence, but you can pull the cable of the air starter only after them. Neglecting fuel pumping will lead to the fact that a hand starter’s cable will have to pull the moving piston of the motor to pump a sufficient amount of air that sucks from the carburetor fuel.

The neglect of the air damper will lead to a strong rethink of the mixture, which is good for a running engine and extremely bad for starting, because such a mixture is well ignited only inside the heated cylinder.

After the air damper is transferred to the closed position of the incoming air, it is not enough to operate the motor at idle, so click and fix the gas key (accelerator, engine speed regulator). The button for turning on/off the motor blocks the operation of the ignition system, so before starting, transfer it to the “inclusive” position.

If you do not transfer the switch to the right position, then the voltage will not come to the candle, which means there will be no spark that ignites the mixture in the cylinder.

After the engine works, transfer the air damper to an open position, because the highly re-enriched mixture is good for starting, because it is flammable even in the cold cylinder, but due to lack of air, the fuel does not burn out completely.

An attempt to mow grass with a closed air damper will lead to a sharp drop in the power of the motor and a strong heating of the valves, so the long work (tens of hours) leads to the gap of the valves or damage to the laying of the cylinder head head.

If the motor does not start or works incorrectly

The reasons that the motor does not start with a two or four jerks of the manual starter cable can be:

Most often, this is due to the incorrectly executed trimmer for the grass, when the procedure is violated or some important point is not executed, so the launch is quite correctly carried out and the motor will work. If the mower is poorly started after storage, then most likely, old gasoline is exhausted, so it is enough to change it.

If the trimmer for the grass was not served for several seasons, then the poor launch can be due to dirty air or fuel filter, so it is enough to rinse or replace it.

If all actions are performed correctly, but there is no positive result, contact the workshop or independently diagnose or repair.

How to start a lawn mower

Our experienced team of editors and researchers who checked it for accuracy and completeness participated in the creation of this article.

Wikihow content managers team carefully monitors the work of editors to guarantee compliance with each article with our high quality standards.

Number of views of this article: 13 800.

How to start a lawn mower? Pull the cord! Okay, we agree. Sometimes this is not enough. Given that some lawn mowers are in different ways, depending on the model, in this article we will give you several general tips. Continue reading!

  • Open the lid of the fuel tank and look into it. If necessary, refill the mower to the recommended level. There should be a marking in the tank to indicate to you to what level you need to fill the tank, but if it is not, then pour it to the neck. Do not overwhelm the tank.
  • Be sure to check the oil level. If the oil is not enough, then you can easily ruin the engine. Oil is usually poured through the lid in the upper part of the mowing case, on which the “oil” is written or the butter is depicted. Just like a car, your mowing can have a special probe with which you can check the oil level in the engine.
  • Please note that some braids (mainly with a two-stroke engine) use the fuel-oil mixture. If so, then carefully read the user’s instructions before refueling the mower.

Check the candle. The candle should be near the engine and have a rubber cap. She produces a spark that starts the engine, so make sure the cap is sitting tightly on it.

Open the throttle. Switch the throttle lever to the middle or extreme last position. Otherwise, there will not be enough fuel to work in the engine.

Caution Caution when starting the engine. Now most new braids are produced with a protective switch that needs to be kept when starting. If your braid does not have such a switch, then make sure that it is stable on the ground.

  • If the engine sneezes, but does not start, then check if there is enough gasoline in the tank.
  • If the engine does not sneeze and does not start, then check the spark plug.

Read the instructions for the operating mowing. If the mower still does not start, then read the instructions in the disruption section. It is possible that there will be an answer to your question.

  • Always clean your lawn mower after work. Dried grass can stick tightly to her. In addition, it smells bad when it starts to rot. Therefore, as soon as you finish mowing, clean the mower from the grass.
  • Never leave a mitch for the winter with gasoline in the tank. During the storage, he can thicken and clog the carburetor.
  • Never launch your mower without proper lubrication, unless you like to buy new lawn mowers every time.
  • Try to be away from the knife of the mowing, if there is even the slightest chance that it will start. Remember, all entertainment and games will end when someone loses his fingers!

Search for a malfunction

The external inspection of the contacts of the connectors and windings of the electric motor did not reveal deviations. The electrical diagram of the lawn mower can be checked and you can check it using a multimeter. Measuring the resistance of the windings with a multimeter included in the resistance measurement mode did not reveal their cliff or short circuit.

A segment of the cable that goes from the switch to the engine was also checked. When connecting an ohmmeter to its ends and intensive bending, the resistance did not change and was zero. It became obvious that the malfunction is in the junction unit, which was to disassemble.

Many manufacturers of electrical devices to exclude the possibility of independent repair during assembly use screws that can only be tightened. The supporting plane of the beam towards the unscrewing is made at an oblique angle and the screwdriver cannot catch.

In addition, the head of the screw has a slot under a trihedral screwdriver, which in the standard sets of bit I have not met. But this obstacle is easy to get around if you heat the screw using a soldering iron or emitting a suction of a self.tapping screw using a drill and a drill rotating counterclockwise.

The screw warmed up to the softening point of the plastic is easily unscrewed by the sting of a flat screwdriver selected. By the way, you can also unscrew the strongly rusted and cloudy screws and screws. I had to do this more than once when repairing electric kettle. When assembling I replace exclusive screws with self.tapping screws, with a standard head.

The switch cover still holds on two snapping latches, which must be taken to the side through the existing slots in the housing. The location of the latch is shown by arrows.

Repair of the jack of the lawn mowing circuit breaker

First of all, the contacts of the end switch using the multimeter were checked. In the squeezed position of the pusher, the resistance between all his contacts should strive for infinity, and with pressed. it is equally zero. The contacts were in order.

Imitation of the button with a finger and turning the lever showed that with the slightest weakening of pressing to the lever, which can occur when the lawn mower moves along the lawn due to irregularities due to the irregularities of the earth, the button pusher returned to its original position-the lawn mower turned off.

When examining the parts of the circuit breaker, it turned out that the supporting surface of the lever of fixation of the end circuit breaker in the on the turned on the position was worn out. As a result, she could not reliably ensure the operation of the unit in general.

It was just possible to fuse to a worn place with plastic, but it will also be worn out over time. Therefore, it was decided to install a metal lining, which would ensure reliable operation of the lever until the end of operation of the lawn mower.

For the manufacture of the bracket, a copper wire ⌀1 mm was taken and flared up with a hammer on an anvil to a strip of about 0.3 mm thick. You can cut the bracket and from any metal, even tin. Further, the strip is given the form shown in the photo.

How to EASILY replace the blade and blade adapter on your push mower.

The extra part of the wire was bought by nippers and the resulting P-shaped bracket was installed on the worn part of the lever. Further, the bracket was warmed up by an electric soldering iron and with the help of a tweezer is pressed into plastic.

After the restoration, the lever was installed in the housing of the switch unit and its work was checked. The terminal switch was securely fixed even with a slight movement of the turnover lever for turning on.

A segment of the cable coming from the circuit breaker’s assembly to the gas mowing housing, in which the electric motor is installed hardly not fixed and constantly fluctuates during operation. As a result, the conductors often occur in the entrance places. For more reliable operation of the lawn mower, a worn.out cable section was introduced inside the circuit breaker.

The left part of the photograph shows the factory laying cable that is striking, so these are stretched conductors on the cable fastening section and solder to the contacts of the end circuit breaker. On the right in the photo shows a cable after a re.entering in the mount. The cable was fixed in a new way at the entrance to the housing of the lawn mower.

After assembly, the circuit breaker assembly was installed back on the handle of the lawn mower and once again its work was checked without power supply. The switch worked clearly.

The next step, the power cord was connected to the circuit breaker and the work in real conditions was checked by trial mowing of grass. The audit showed that the independent repair of the lawn mower is made efficiently and can be fixed on the body cover.

electric, lawn, mower, stavr, combi

The effectiveness of the repair was confirmed in practice, on the lawn of several hundred parts of grass and weeds, growing under fruit trees were repeatedly scored over the summer and the switch did not ever turn off spontaneously.

User manual


As we have already said, the trimmers for the grass are produced in and differ not only by a simple and reliable design, but also by simple maintenance. At the end of the work, clean the trimmer for grass from the residues of dirt, dust, foliage or other dirt. To do this, you can use the watering hose or just wipe it with a damp rag.

After cleansing, it is recommended to wipe the entire structure dryly to prevent the appearance of foci of corrosion on the product body.

Gasoline trimmers for grass are working on a fuel mixture. To prepare it, you need gasoline and motor oil in a proportion of 25: 1. As fuel, it is necessary to use high-octane fuel of the AI-92 or AI-95 brand.

Lubricants are produced under the brand of the Stavr and was specially designed for their garden inventory. It corresponds to the classification of SAE 10W-30 or SAE 30.

10W-30 oil SAE 30

Rules for the operation of electric models

Recently, a trend has been visible when new owners prefer electric models of trimmers. Why is the demand for gasoline? And here everything is simple. the price of the question.

Gasoline motorcycles are more expensive and electric cheaper. Although they have a similar range of work performed.

Electric models are quieter, environmentally friendly, have less vibration, do not require constant fuel filling, easier. They are able to easily cope with work on a area of ​​up to 15 acres.

The length of the factory cable of electric trimmers of the Stavr brand is not more than 1 m, but a carrying of 10 m long is always bought to the kit for them. If you have a very large lawn at your disposal, or far from the power, then you can take them 2.

First start

Before starting work on the trimmers of the Stavr brand, you should definitely read the operating instructions in order to understand the principle of safe operation on these machines.

If you are the first owner, then before the first start it is necessary to prepare and pour the fuel mixture in the correct proportion.

Operating instructions do not recommend immediately starting work on new machines of the Brand Stavr brand. It is necessary to let the car carefully grease and start working as a whole. To do this, let it work out without load during the first 2-3 hours. During this period, you can let the car work out at idle or make a beard of young grass with a fishing line.

The main malfunctions and their correction

Stavr is a brand, the main emphasis in which is made on practicality and simplicity. Therefore, the task of each owner of this technique to know the ways to correct the main malfunctions that may occur during operation.

Some owners of a trimmer for the grass of the Stavr during operation are highly consumption of fishing line. This is what can lead to this:

  • Incorrect winding in the coil;
  • Work of work on soil with solid rocks or uneven ground;
  • Frequent collision with trees, fence, etc.D.;
  • Low.quality fishing line for trimmer.

Sometimes the engine can junk and not start. In 90 % of cases, the following reasons lead to this:

  • There is no fuel in the tank (pour it);
  • Insufficient number of primer presses (completely press it 5 times);
  • The engine is flooded with fuel (pull the starter handle with a completely pressed gas handle);
  • Old or low.quality fuel is used (drain gasoline and pour new, fresh);
  • Spark plug defect (repair or replace it).


“I believe that Stavr is the best in its price category. I have a height of 1.84 and the dean of the bar is simply perfect for me. I recommend working on it no more than an hour, because there is a very strong vibration. I somehow carried away and worked for a half with a standard fishing line. So then my hands trembled in a half hour. But during this time he never turned off. The shoulder belt is convenient and the weight is distributed evenly. The bicycle hilt is very comfortable and comfortable in work. Pros: power, comfortable handles, optimal length length, better price. Cons: Tangible vibration “


“I bought it because I inherited a section of hundreds of 15, on which no one did anything for more than 5 years. The device is just a beast, she marshes everything in its path. Even the neighbors went to visit, asked what kind of apparatus. The fuel mixture is easily prepared, starting without problems. When installing a knife, even large trees spinned. There is only one significant drawback. overheating. After an hour of operation, a large engine heating occurs, especially this is relevant in the heat. But on the other hand, the technique is resting, and you. Pros: reasonable fishing line, fast assembly, power. Cons: slight overheating and vibration “

Budget devices

Reliability and performance are the most important parameters not for all buyers.

After all, part of those who are interested in acquiring such technology, for various reasons, need the cheapest mower, albeit to the detriment of other characteristics.

Therefore, we have prepared a rating of the best budget, that is, as cheap, apparatus as possible.

Common for all models of budget lawn mowers are:


An asynchronous engine with a capacity of 1 kW is installed on it, due to which it successfully mows lawn and meadow vegetation.

FPLM1000 4 does not have particular reliability, but according to the reviews of many buyers for 2-3 years, it serves without serious breakdowns, after which you can buy exactly the same, but a new one.

A comfortable handle facilitates the carrying of the device, and the slight weight makes it suitable for women or the elderly.

Here are the main parameters of the lawn mower:

  • asynchronous electric motor 1 kW;
  • capture 32 cm wide;
  • mass 9 kg;
  • rear discharge of grass and working with a 27 liter grass collector;
  • .

CMI C.ram-1200/32

The CMI CMI ERM 1200/32 electric device is one of the cheapest lawn mowers with many positive reviews. Equipped with an asynchronous engine with a capacity of 1.2 kW, and its spinning width is 32 cm. Thanks to small sizes, it is well suited for mowing grass around obstacles and in narrow areas of complex shape.

Despite the low price, the device turned out to be quite reliable, so it can be used even for mowing relatively high meadow grass.

However, not only a trimmer for the grass, but even a gasoline lawn mower is not about a full.fledged replacement. After all, the main purpose of this model is the haircut of grass in small areas.

Here are the main parameters of the lawn mower:

  • asynchronous electric motor 1.2 kW;
  • capture 32 cm wide;
  • mass 12 kg;
  • rear discharge of grass and gathering in a grass collector with a volume of 30 liters;
  • .

Carver LME-1032

This low.power (1 kW) braid is well suited for mowing grass in areas with an area of ​​50-200 m 2.

Thanks to the plastic case, it turned out to be not too heavy (9 kg), so it is well suited for people who do not have great physical strength, for example, women or adolescents.

Imagine engine speed I provide good quality haircut of lawn grass, but the thicker the stems of plants, the worse this model copes with it.

At high speeds, the motor has a small torque, which means that the speed of rotation of the knife falls when a collision with more or less thick and gesture stems of plants.

The main characteristics of the lawn mower:

  • synchronous electric motor 1 kW;
  • capture 32 cm wide;
  • mass 9 kg;
  • rear discharge of grass and working with a grass.collector with a volume of 17 liters;
  • .

GreenWorks 1200W

This small lawn mower with a small capture width (33 cm) and a rather powerful synchronous engine (1.2 kW).

Thanks to this ratio of these parameters, the device copes well even with relatively high meadow grass, therefore, when used without frequent strong overloads, it will last many years.

For their power, the mower was not too heavy (6.9 kg), so even women will be able to independently deliver it to the lawn and back.

  • synchronous electric motor 1.2 kW;
  • capture 33 cm wide;
  • mass 6.9 kg;
  • rear discharge of grass and working with a 25 liter grass.collector;
  • .

Caliber GKE-1200/32

This model, despite a fairly low price, is very good survivability.

A 1.2 kW synchronous engine and a 32 cm width capture provide an effective mowing of any grass with a height of 5–40 cm.

However, according to the reviews of many buyers of this GKE 1200/32 caliber, the factory sharpening of the knife is insufficient for a high.quality haircut.

To solve this problem, it is advisable to immediately sharpen the knife.

Technical characteristics of the lawn mower:

  • synchronous electric motor 1.2 kW;
  • capture 32 cm wide;
  • mass 9 kg;
  • rear discharge of grass and working with a 30.liter grass collector;
  • .

Sibrtekh L1200

This inexpensive small.sized household apparatus is designed to cut small areas on which lawn or wild grass grows 5-30 cm high.

The quality of the manufacture of most such mowers is quite high, but there are unsuccessful copies.

This is due to the fact that the domestic company Siberchics is a packager, that is, it does not have its own production and sells products of various manufacturers under its brand. Nevertheless, for the budget segment, the Sibrtektek L1200 mitch is rather reliable and the reviews about it are very good.

The main parameters of the device:

  • asynchronous electric motor 1.2 kW;
  • capture 32 cm wide;
  • mass 8.2 kg;
  • rear discharge of grass and working with a 30.liter grass collector;
  • .

Elmos EME-120

Elmos EME-120-This is a good Chinese electric mower with an asynchronous engine designed for mowing lawn and meadow low grass.

The engine differs in survivability, but deck is made of too fragile plastic, and its walls are not thick enough, which is why the stones flying away from the knife often break it.

However, when used in areas without stones, this device has been working without breakdowns for several years, which is not bad for the lawn mower for such a price. With careful use, it can last 3-5 years.

Self.propelled review

Electric self.propelled lawn mowers are more convenient in work than non.self.propelled (manual) models, because they move on their own, and the operator only directs them. They are a little more expensive than non.self.propelled devices, but are completely identical to them in their capabilities, because the only difference between them is that some models are equipped with a drive to wheels, while others are not.

Below we offer a rating of the best self.propelled devices from the most popular manufacturers.

Wolf-Garten a 400 EA

Despite the plastic case, the Wolf Garten A 400 EA lawn mower is reliable, because it has an asynchronous engine with a capacity of 1.7 kW, as well as an additional cooling system (more effective fan).

Because of this, the motor is slower and more easily tolerates overload.

Thanks to the width of the mowing 40 cm, the Wolf Marten apparatus is well suited to combat relatively high grass, but it is not too high. Some owners note too high speed of the apparatus, which is why it has to be restrained in areas with high vegetation.

Here are the main parameters of the lawn mower:

  • asynchronous electric motor 1.8 kW;
  • capture 40 cm wide;
  • mass 26 kg;
  • rear discharge of grass and working with a 55 liter grass collector;
  • mulching;
  • plastic case;
  • .

Makita Elm4621

This device with an asynchronous engine with a capacity of 1.8 kW and a 46 cm width is well suited for cutting lawn grass, but it is undesirable to use it for mowing high vegetation due to too high speed.

If you do not turn on the wheel drive and move the mowing on the ground very slowly, then it effectively copes even with a height of a knee.high height.

Here are the main parameters of the model:

  • asynchronous electric motor 1.8 kW;
  • capture 46 cm wide;
  • mass 32 kg;
  • all types of emission and processing of grass;
  • steel case;
  • .

Viking ME 545 V

This device is equipped with a 1.6 kW synchronous engine, as well as 43 cm width, which combines good performance and suitability for mowing relatively high lawn grass.

However, it is undesirable to use it for mowing meadow vegetation, because it has thicker and stronger stems, which is why the load on the motor increases sharply.

The main advantage of the model is a variator that provides a change in speed, which allows you to work in more comfortable conditions, because the operator can adjust it under his step, as well as slow down in areas with more durable grass.

  • synchronous electric motor 1.6 kW;
  • capture 43 cm wide;
  • mass 32 kg;
  • rear emission of grass and working with a 60 liter grass collector, mulching;
  • steel building;
  • .

Makita Elm4601

This model is well suited for servicing well.groomed lawns, because it has a large capture width of 46 cm, and its speed is 3.8 km per hour, which is not applicable even for cutting low meadow grass.

A 1.8 kW synchronous engine provides high.quality mowing of grass, and the grass collector has a sufficient volume to empty it only during stops for cooling the motor.

Here are the main parameters of the lawn mower:

  • asynchronous electric motor 1.8 kW;
  • capture 46 cm wide;
  • mass 27 kg;
  • rear emission of grass and working with a 60 liter grass collector, mulching;
  • steel case;
  • .

Sungarden 1846 ES

Despite the fact that this model is purely Chinese, it has good performance and survivability.

The capture of 46 cm wide provides a rapid mowing of lawn grass, and an asynchronous engine with a capacity of 1.8 kW easily tolerates short.term overload.

In addition, you can not use Sungarden 1846 ES to cut large territories, because Chinese asynchronous motors are noticeably inferior to European or Japanese, and the cooling system is not effective. However, given the low) all its shortcomings do not seem significant.

electric, lawn, mower, stavr, combi
  • asynchronous electric motor 1.8 kW;
  • capture 46 cm wide;
  • mass 31 kg;
  • rear discharge of grass and working with a 60 liter grass collector, mulching (option);
  • steel building;
  • .

Inexpensive (budget) models can be purchased for 2-8 thousand, but they rarely combine good technical characteristics and reliability.

Devices of the average price range will cost 10-20 thousand, they combine quite high power and good reliability.

The most reliable models of the highest price range cost 20 or more thousand, or their main difference is either the largest set of functions, although there are devices that combine both advantages.

Repair of malfunctions of an electric mower

Long grass that has wound on them can be led to jamming knives. For repair, you need to turn off the device from the network and twist the cylinder in the opposite direction.

If the electrical device is silent, the drive belt breaks the resulting result of wear: it can be stretched or broken off. This means that you can not do without replacement, for which you need to remove the protective cover.

The new belt is first installed on a small gear of an electric device, then, put on a large pulley, and turning it on.

To replace the power cable of this electrical device, it is necessary to de.energize the device and unscrew the lid.

To disconnect the cord, insert the hexagonal key into the hole with the wires, freeing the clamp.

The new power cord is installed in the reverse order.

The reason may also be hidden in a faulty power switch, which is simply replaced by a new.

Repair of an unexpectedly stopped electric engine

If the motor worked, but suddenly stalled, you need to check the crankshaft and the piston. perhaps they were overwhelmed. This is due to the absence of oil in the crankcase. It is better to contact specialists with this breakdown, as in the case when the electric motor of the lawn mower requires repair.

For non.precise operations of the lawn mower, the owner must conduct its regular maintenance after the end of the working season, t.e. Before her premises for winter storage. This will cost cheaper than repair or buying a new electrical device.

Among the main measures that ensure the reliable operation of an electric mower is clean. The mowed grass accumulated under the neckline causes erosion of metal parts. The compressor or blunting will help to remove the remaining weeds.

The electric motor of the mowing is air cooling, therefore, it also requires a cleanliness that is a key to effective functioning. Suitable for cleaning the cooling ribs soft brush and compressed air.

Timely oil replacement specified in the use guide will become the key to prolonged trouble.free work, as well as the periodic cleansing of the air filter.

In the presence of a certain experience, it is easy to repair the lawn mowers with your own hands. The video below will help in this.

Hyundai Le 4600S Drive

On the advice of craftsmen and experts, a good electrics mower with a 60.liter grass collector will be the Hyundai LE 4600S Drive, which has a high level of performance. So, the maximum speed at idle reaches 3600 revolutions per minute, which makes the model a good option not only for aligning the lawn, but also for mowing burdocks, weeds and other plants with hard stalks.

Pleasantly pleases the large width of the capture reaching 460 mm. Thanks to it, you will quickly cope with a large amount of work. The model is as simple as possible to use. All because it moves independently, and the user needs to only correctly adjust the direction of movement in a timely manner. Due to this, the device is perfect for women and pensioners. Among the huge number of useful options, it is worth highlighting a system for adjusting the height of the mowing. It makes it possible to choose the optimal value in the range from 30 to 75 mm.

The device provides for the possibility of mulching, which allows the use of mowed grass with benefit, turning it into useful fertilizer. The main handle is tuned in height, due to which it provides comfortable conditions for use for each person. The advantage will be that it can be folded, and then when stored and transported, it will take up less space and will not be damaged.

  • Self.propelled;
  • A spacious container for storing grass;
  • Mulching function;
  • High speed of rotation;
  • Reliable aggregate part;
  • It is convenient to adjust the height of the mowing;
  • For the passage, she mowns a strip of grass with a width of 460 mm;
  • Deco is made of metal;
  • Fast and convenient assembly;
  • Belt drive;
  • Maneuverable.

Makita Elm4621

The title of the best self-propelled electric lawn mower for the summer cottage in 2022-2023 gets models from Makita, which will be the best option for processing territories with an area of ​​up to 1000 m². It moves at a speed of 3.6 km/h, which is the optimal value. You don’t have to run after her or vice versa too often slow down. The 1800 W engine provides excellent performance, which is enough for mowing grass and almost any plants.

Given the features of the site, each user will be able to choose the most suitable mowing height in the range from 20 to 75 mm. For summer residents, the mulching function will be especially useful, which allows you to process the grass into fertilizer for the soil. With prolonged storage and transportation, the handle can be folded so that it is not damaged.

The advantages include a large width of mowing. 460 mm of grass is cut off in one pass, which has a positive effect on the speed of processing the entire site. The main material for the case was metal, so mechanical influences will not cause it any harm to it. Two options are offered for emission of grass. in a 60-liter grass collector or back to the ground through the side hole.

electric, lawn, mower, stavr, combi
| Denial of responsibility | Contacts |RSS