Stihl chainsaws how to start: the launch process step by step

In summer cottages, in private houses, when working in gardens and personalities, you often have to use special equipment that requires the use of relevant knowledge and skills from the user.

STIHL chainsaws. A garden tool with an engine that has a wide range of use: harvesting firewood, cut off old trees, seasonal trimming of branches, etc.D. The equipment of the German company STIHL knows such technical characteristics as:

The unit belongs to traumatic types of technology. Before its use, you must familiarize yourself with the user’s instructions, observe all safety measures. An important and responsible step is the correct launch of the device.

How to start a STIHL saw

Before using the device, you need to carefully study the manufacturer’s instructions. Different models of saws differ in design, technical and functional capabilities and, accordingly, have their own inclusion features.

We will answer the question: how to start the STIHL saw, on the example of the general algorithm for working with the unit:

  • Refueling with fuel. It is advisable to pour the fuel mixture immediately before starting work. Attention should be paid to the quality and proportions of fuel and lubricants, since the productivity of the equipment and its further condition depend on this.
  • It is necessary to squeeze the chain brake forward to activate it.

When the chainsaws should start, you need to give her a minute to warm up, after which you can start work.

When working with an already warmed engine, you need to put the lever for adjusting the damper to the working position, and start the unit in the usual way.

To stop the operation of the chainsaw engine, you need to raise the lever to adjust the damper up.

Why the STIHL saw is not starting?

The principle of starting the unit consists of a chain of interconnected processes. If one link in the chain fails or is absent, then this not only negatively affects the operation of the equipment, but can also lead to its breakdown or to the problems of starting the device.

The operation of the tool involves the following stages:

  • Fuel mixture. It is needed for engine operation;
  • Submission of sparks. Necessary for ignition;
  • Launch and work of the device. As a result of previous processes.

If, despite the order of actions described in the instructions, the unit does not start, then one of the processes was disturbed in one of the links of the chain.

The reasons because of which the chainsaw may not start:

  • Malfunctions associated with the fuel system: low quality fuel, lack of fuel supply.
  • Clogging of the main filter elements. The contaminated benzophilter prevents the supply of fuel to the carburetor of the internal combustion engine, which immediately negatively affects the operation of the technique. The clogged air filter, in turn, cannot provide a full supply of air, without which the engine is impossible.
  • Lack of sparks. The reason for this may be a poor or spoiled spark plug.
  • Overheating of the engine.

Follow the quality and correct ratio of the proportions of the fuel mixture. The presence of water or a large amount of oil in fuel can lead to a malfunction or to problems with the start of garden inventory. The optimal shelf life of a gas-oil mixture is 1 month, then coking tarry deposits are formed in it, which adversely affect engine performance.

If at the first attempt to launch the saw did not work, first you can stop it for 10 minutes, then try to start the unit again. If a second attempt does not give a result, you will have to look under the body of the garden machine: check the condition of the filters, inspect the carburetor and the spark plug. Polluted filters must be cleaned, washed in soapy water, then dried. Running filters will have to be replaced. If the spark plug is wet and does not give a spark, you can try to dry it, but it is advisable to replace it with it.

How to start a STIHL MS 180 saw

The STIHL 180 unit has a regular launch system, since any additional mechanisms are not installed on the model. Before starting operation, a benzo-oil mixture should be poured into the fuel tank, and filled with oil tank. Recall that for its equipment, the manufacturer recommends using only certified stihl brand oils.

  • Enable the ignition, set the control lever to the lowest level.
  • Put the tool on a hard surface.
  • Pull the starter handle until the fuel enters the cylinder. The characteristic sound of the first outbreak indicates that the fuel has reached the cylinder, and the device is ready to start.
  • Transfer the control lever to one division up.
  • Pull the launch cable again. The mechanism will begin to work at increased speeds, due to the most open throttle.
  • Press and release the gas trigger for installing the damper in idle mode, which normalizes the revolution of the cutting part.

If after the listed actions it was not possible to start the device, then you need to check the inventory for the presence of faults.

Why the STIHL 180 saw is not started

The main reasons that can lead to the difficulties of starting the tool:

  • Lack of spark is a common problem for all types of chainsaws. Without a spark, the process of ignition and ignition is impossible. The first thing to do if it is not possible to start the STIHL 180 saw is to check the spark plugs. Flooded candles indicate a leakage of lubricating oil. During prolonged operation, the junction of the oil tank hose and the pump loses tightness, which, in turn, can cause leaks. To eliminate the problem, you need to restore tightness at the junction of the joint, dry or replace the candle. The spark plugs have a limited life resource, over time they produce their resource, they have to replace them.
  • Blocks in the fuel supply system- occur during use when contaminating aero- and gasophilters. To check the condition of the filter, what you need to get and try to blow. If the air does not pass, then there is clogging that prevents the supply of fuel. Solution. Cleaning filters. In the same way, you can check the contamination of the fuel supply hose. You can clean the hose with wire.
  • The gap or crack of the fuel pump membrane is another reason that prevents the intake of fuel. Replacing the membrane will solve the problem.
  • Equipment malfunctions are also evidenced by irregularities and chips on the cylinder, which usually cause the aggregate attenuation.

How to make figures from a rope

Wikihow works on the principle of wiki, which means that many of our articles are written by several authors. When creating this article on its editing and improvement, 31 people (a) worked, including anonymously.

The number of sources used in this article: 14. You will find their list at the bottom of the page.


Number of views of this article: 37 584.

The creation of various figures from a rope is one of the children’s entertainment around the world. This is one of the oldest games, the origin of which is likely to dates back to the Stone Age. Many of the rope figures are made from the starting position A, which is known among many various foci of culture around the world. You will need to master the construction of a starting position and before starting the study of figures from a rope using it as a basis, for example, cat crawls and Jacob’s stairs. [1] X source of information [2] X source of information by other useful starting positions are the starting position of Navajo and the starting position of Murrey. [3] X source of information [4] X source of information despite the fact that they are not as common as the starting position A, they serve as the basis of most figures in the cultures of the regions of their origin.

Take a piece of rope. Any rope or yarn thread will suit you. It can have a different length, but it is best to work with a rope with a length of 0.9-1.8 m. [5] X Source of information [6] X Source of information Working with a multi.Colored rope can facilitate your understanding of your actions at the learning stage.

Tie the ends of the rope among themselves. The knot should be reliable, but not very large. Sometimes you can find on sale a ready.Made rope for this game, which already has the shape of a ring. Make sure that the rope you use slides well along your skin without leaving friction burns.

Throw a rope on your thumbs. Start by placing your hands in front of you with your thumbs up. Throw a section of the rope on the side sides of the thumbs facing your chest. At the same time, your hands should be directed with palms towards each other and be at a distance of about 15 cm from each other. [7] X Source of Information

Distent your arms to the side to the limit. Hold your hands at your chest level with your palms to each other. As a result, the rope should form a rectangle without any signs. This position of the rope is called the first position. [8] X Source of information [9] X source of information

How to get a car with a rope

And so a nuisance happened to you: the battery sat down and your car does not start? You do not have high.Voltage wires to light a car? Do not worry, you have a simple way out of a difficult situation. You need a regular rope that will help you start the engine from a completely sowing battery.

We offer you an interesting way to start the engine using a rope. You do not need to push, tearing your car, in order to get it from a pusher. You also do not need high.Voltage wires to light a car. You will need only a jack and an ordinary strong rope. Do not believe? Watch the video.

Your task is simple. You need to raise the leading axis of your car with a jack. Then you need to wrap the wheel with a rope. Then you just need to sharply pull the rope, unwinding the wheel. This is approximately the same as pulling out the lace of the lawn mower in order to start it.

This method imitates the launch of the car from the pusher when the car is pushed by several people. Having spun the wheel of your drive with a rope, you begin the rotation of the car drive, which in turn is transmitted to torque to the crankshaft of the engine. The crankshaft begins to move the pistons that create sufficient compression to ignite the fuel in the engine combustion chamber.

Having launched the engine, its torque begins to twist the generator that will recharge your battery.

Unfortunately, this method only works on cars with a manual gearbox. It is also worth noting that the easiest way is to start the engine in the volume in this way. The smaller the power unit is the power supply, the easier it is to start a motor using a rope.

In addition, in order to launch your car must have an open differential. Otherwise, this method may not fit your car.

We hope that you still do not have to apply this type of engine start in practice. But, nevertheless, in some cases he can be useful to someone. We also believe that there are more modern ways to launch an engine in a car with a discharged battery. For example, you can use a starting charger or just ask to help someone push your car.

A method of starting a hot engine and an engine equipped with a decompression system.

Hot engine, does not need to enrich the mixture of fuel with air, so you can start the saw without closing the air damper. The ignition is simply turned on and the starter is moved, after which the working chainsaw should be launched.

Large.Volume engine, have a fairly serious compression, which extremely complicates the process of turning. To reduce the efforts required to start a large volume and power saw, manufacturers use special decompression valves, when pressed on which the compression is noticeably reduced and the engine is easier.

Valves can have different views, so study the instructions for the tool in advance.

Thus, before any type of launch, whether hot or cold, it is necessary to press this valve designed to reduce the resistance, and thereby increase the service life of the starting device.

Articles, you can summarize the key points of launching the chainsaw. First, you need to start with maximum safety. Second, any deviations from the launch algorithm are not allowed. And finally, do not start a chainsaw without a starter! Consider the information from the article and use your tool correctly.

Briefly about the main thing

This model is the pride of the German manufacturer and is a specific inventory created for the insignificant level of work. It can be used for less than 20 hours every month. How often in the Stihl 180 chainsaw how to choose a chainsaw. How. This beautiful device will easily help you cope with your garden, prepare firewood for a winter period (see. How to cut down a tree), produce cleared areas, and will also be an indispensable assistant in other areas, let’s say, simple manipulations.

We can say that these mini-model of a chainsaw, as it has a slight weight, which is 3.9 kg, she does not have a large mass of tank of both oil and fuel. The manufacturer equipped this device with a two.Stroke engine with a sufficient power for easy operation.


Over, it is quiet enough, since during operation the noise level does not exceed 98 dB. So that you better understand the degree of volume, just compare its noise with colloquial speech, which has an indicator of 76 dB.

The power of this model is equal to indicator 2.6 W. It is worth noting that this is a fairly significant level of force, given that it is not a professional chainsaw. Oil tank has a total of only 0.145 liters, and fuel. 0.25 liters. The tire has 350 mm in size, and the step is 0.325 inches.


Shkotov Node (The Sheet Bend)

As well as a direct node, it serves to bind two free ends of various ropes, but, unlike the first, is used not only for cables of equal diameters, but also for markedly different.

In order to tie it, you need to fold the end of the larger rope thickness in the form of the letter J, and the end of the thin rope is carried out under the middle part of the resulting half. After that, the subtle end needs to circle two parts of the J-shaped end at once and, having made one revolution, bring it to the side (passing it at the beginning of a thin loop). But, it is worth noting that the most durability of the school knot provides precisely when connecting the cables of various diameters. If it is supposed to tie a couple of identical ropes, it is better to give preference to a direct node.

How to tie a rope correctly.

Sooner or later, but we will definitely have a situation when it will be necessary to tie something to something, tie two ropes or something like that. We, land rats, know only a couple of ways how to do it, and our nodes are not always reliable. Now we will consider how to tie or tie something with high quality.

As I said, in everyday life, most often people connect two ropes (or tie something) with a woman’s knot. In the best case, it turns out to knit a direct knot. Here’s what Felix Risenberg writes about the direct knot. The author of one of the best textbooks for sailors:. It (node) should not be used to bind cables for traction. This is a good node for packaging things, bundles, etc. Another author writes about the same knot:This node, used to bind two cables, took more human lives than a dozen other nodes combined.The babi node is untied under the tension even easier than a straight line.

Now it is worth considering the correct knitting of nodes. We will determine the terminology. Suppose we tie the cargo to the trunk of the car. There is a rack in the trunk, for which we will fix the rope. The end of the rope, fixed motionless or not used when knitting the node is called the indigenous end, and the unimportant free end of the cable, which begin movement. The chassis.

AWESOME Rope Chain Saw

So, first we need to fix the rope on the rake. For these purposes, a loop is suitable, which we will make using a conversation node, which is also called Bulin. This knot is knitted very simply, never delayed tightly, does not slip and does not unleash, does not spoil the rope. And it is very easy to untie it yourself. In principle, if 200% of the margin of strength is not required, the beginning of the rope can be tied with rapidly outstanding nodes, but we will not consider them today. Bulin is also used to create a loop to pull a person out of the well or raise upstairs. The loop is passed under the armpits and gently pull/release the rope.

After that, you can already fix the load. Usually, after a rope with a rope of the cargo, the skeleton is simply wrapped around the rail. But such a compound can stretch if the load is very swaying, and the fastening can get out. Therefore, we will use a self.Tightening spitting knot. Note that it is reliable only with constant traction. If you need to fix it tightly and, in principle, the rope is not sorry. We use the “constiter”, a knot that is delayed very strongly, it is almost impossible to untie it. Usually after the “constitator” the rope is simply cut.

Sometimes the force will not be applied across the rails, but at an angle sharp to it or even almost along it. Then it will be indispensable. Or, for example, you need to raise it to any height. Having tied the rope over the middle of the log when lifting we get a dangling load, which can lead to tragedy. In this case, the sliding bayonet is indispensable. We look at the application scheme. Two revolutions around the cargo must be done on the side in which the thrust will be directed.

Finally, how to tie two ropes or two ropes? For these purposes, a flat knot will be ideal. They can connect ropes of different thicknesses. The knot does not spoil the rope, does not drag it much and does not crawl. But after removing the thrust, the node is easily untied. In the given method of knitting there is subtlety. First you need to tighten the knot with your hands. For some time the knot will crawl, but when it stops holding it very firmly.

Other types of nodes, for example, a rapidly outstanding Kalmyk knot, we will consider another time another time.

The principles of knitting and the properties of nodes are taken from the book L.N.Scriagina “Sea Nodes”.

Group your body in such a way as to increase your chances of escape

An increase in your chance to escape begins before the rope is tightened and the nodes are tied.

“Having grouped the body in a certain way, the material is said on the website www.Artofmanliness.COM, you will create more potentially unnecessary parts of the rope, which will facilitate unleashing.

Acting as if you are passive and compliant with your kidnapper, in fact you deliberately take a position that will not allow the ropes on the hands and around your corps effectively ”.

When you put your hands, as shown in the figure above, a space is created between the wrists. Subsequently, a person who needs to escape by the will of fate as soon as he is left alone with the pouts, can reduce the elbows, which will allow somewhat weaken the tension of the rope; It will sag somewhat, and this will already allow you to get a maneuver for action.

The struggle for freedom begins even before a person was tied up!

Similarly, you need to act if you are tied to a chair. The benefit for this has its own tool, laid down by nature in each of us, is the possibility of a chest to expand. The task is to make your body (namely part in the chest area) slightly more.

To do this, you need to take the shoulders back, a few protruding, broadening the chest on inhalation, straightening your hands, which will allow you to quietly pull the rope.

And again, as soon as the abductors leave you alone, with a deep exhalation, the chest will decrease, the tension of the rope will subside, it will sag and it will be easier for you to get out of the trap.

Well, if a person is tied to a pillar or wood, behind the chest and ankles, in addition to the previously described option with an increase in the volume of the chest, bring the knees and toes together so that the rope in the lower body is also shedding.

How to weave a rope

Co.Author (s): Nicole Bolin. Nicole Bolin is a needlework specialist and Executive Director of Stencil needlework studio in Phoenix, Arizona. Specializes in the design of interiors and a variety of needlework projects. Received a bachelor’s diploma in livestock at the University of Illinois at Urban-Shampeyn and was engaged in science for 15 years before changing her career. Has a certificate for interior design issued by the New York Institute of Arts and Design. She opened Stencil in 2017 to teach people to create home.Made objects that are suitable for the style of their home and lifestyle.

Bring Me The Horizon. Die4u (Official Video)

The number of sources used in this article: 17. You will find their list at the bottom of the page.

The number of views of this article: 97 189.

A wicker rope has additional strength and acquires universality in terms of its use of its use. There are various methods of weaving ropes: you can weave a rope from only one thread or combine several rope threads into one to create something even more durable.

  • To scorch the end of a synthetic rope, bring it to the candle flame and hold it over it until the material is melted. [2] X Source of Information
  • You can also wrap the ends of the rope with a thread so that they do not bloom (the tooth thread is perfect for this purpose). This is the so.Called rope note procedure. [3] X Source of Information
  • In addition, to fix the ends of the rope and prevent their bloat, you can use tape.
  • In the starting position, all three rope threads should lie next to each other, not interwoven. [4] X Source of Information
  • It will be useful to give threads abbreviated letter designations a, b and C.
  • Also, threads can be indicated with color marks or initially take threads of different colors if you want to get a multi.Colored rope.

Start throwing the side threads through the central thread. Start by getting thread a, crossing it from above with thread b. Now the threads should lie down in the following order: b, a, c. Then take the other side thread C and throw it through the new central thread and. Now the threads will fall in the following order: b, c, a. The indicated operations are the basis of the three.Minute weaving scheme. [5] X Source of Information

  • In continuation of the above example, you will move the thread B through the thread C, making the thread B the new central thread.
  • Then you will spray the thread a through the thread b, making the thread a with the new central thread.
  • You can continue to move according to the same weaving scheme to the very end of the rope threads used. [6] X Source of Information

Tie the end of the woven rope. When you weave the rope to the end, you will need to fix the weaving. You can bandage the threads with tape, island or tie them together with a strong knot.

| Denial of responsibility | Contacts |RSS