Chainsaw nozzles: a useful functional addition to the tool

The nozzles on the chainsaw significantly increase the list of operational capabilities of this tool. This article contains an overview of the most popular devices and fast.Out nozzles that allow the use of a chainsaw as a corner grinder, a lamb, a goroder, a drill, a boat engine, a pump and other types of specialized equipment.

Gasoline saw. A universal tool that has rich functionality. In the household and in the summer cottage, it is simply priceless. Thanks to the use of additional nozzles and devices, the scope of this tool can be significantly expanded.

install, corner, grinder, chainsaw, nozzle

No tool can compete with the capabilities of the chainsaw. In combination with a certain nozzle, it can be used as a drill, pump, and even a boat motor. If necessary, this unit can pump out water from the well, as well as cut the stone and metal. Some manufacturers even managed to make a trenches from a chainsaw, although the cost of such units is very high.

Chainsaws are equipped with powerful and at the same time compact engines that are quite unpretentious in use. In combination with a membrane carburetor and a sealed fuel supply system, such a tool can perform a wide range of work. The ability to connect nozzles of various types is provided at the expense of the output shaft having a special design.

Note! Most of the components are designed for branded tool models. This is mainly nozzles on the Stihl and Husqvarna chainsaw. The range of additional devices for budget models is very limited.

Advantages of using removable nozzles for chainsaws

Replaceable nozzles, unlike a whole set of tools for various purposes, occupy a minimum of space, so for their storage it is not necessary to divert a special room. In the presence of appropriate skills, replacing a standard saw tire with any removable device is carried out in just a few minutes.

Buying nozzles is more economically more profitable than acquiring a whole set of tools. Removable devices allow you to get rid of the need to use additional equipment. If it comes to the purchase of a corner grinder, the price of the bunch on the stihl chainsaw will be 2-3 times lower. Over, branded models are practically not inferior to a highly specialized tool with a similar function.

The use of nozzles allows you to recoup the cost of purchasing a chainsaw much earlier. If earlier this tool was used exclusively for cutting wood, today, thanks to removable devices, with its help you can successfully solve many construction, domestic and economic problems.

A very powerful gasoline engine is installed in the saws, which is more effective than electric motors of highly specialized tools. There is also no binding to the outlet, so this unit is mobile and can be used in the field.

If you have the necessary skills and knowledge, you can independently make removable devices. To create nozzles on a chainsaw with your own hands, sandpaper, welding machine and spare parts from old tools, for example, pulleys, chains, shaft, etc. Will be required. P. On the network you can find many recommendations and step.By.Step technologies for the manufacture of such components.

Why is it not recommended to connect the nasal to the chainsaw

The use of nozzles has certain disadvantages. This is primarily due to operational and technical characteristics. Chainsaws have a given level of loads, they are designed to work in certain modes. For this reason, some of the instrument owners are opposed to the use of additional devices. This mainly applies to nozzles for the saw “Stihl”, Husqvarna and other prestigious professional models.

The fact is that the connection of the “corner grinding” nozzle on the Partner or Husqvarna chainsaw does not pass without a trace. When using such devices, the tool engine operates at maximum speeds. Over, this is done for a long time. In some cases, the saw does not have enough rotational moment. As a result of this, the period is reduced between repairs, and the internal parts wear out much faster.

Note! According to studies, nozzles such as “Loor”, “winch”, “goroders” and “compressor” do not harm the technical condition of a gasoline saw.

The most unsafe chainsaw types of nozzles:

If grinding equipment is used in the work, the air intake filters on the tool are too much clog. For the use of nozzles such as “pump” and “boat motor”, long.Term operation of the engine at high speeds is required, which also does not benefit the chainsaw.

These shortcomings are in full or partially compensated by the high wear resistance of modern chainsaws. The negative impact of the “angular grinder” nozzle on the Husqvarna chainsaw can be reduced using heat.Resistant branded motor oil. It will protect the engine from premature wear.

Why make a saw from a corner grinder with your own hands?

If you study numerous reviews and Комментарии и мнения владельцев of a home.Made chain saw from corner grinders, we can say that it is quite convenient and universal equipment. Changing the nozzles to the corner grinder, you can make several of the tool: chain and disk saw. It is also worth noting that the alteration of old equipment has always costed operators cheaper than buying a new. Therefore, we conclude that to make a chain benzo- or electric saw from a corner grinder is convenient, fast, cheap and universal.

See also  How to sharpen a wood disc on an angle grinder

The most important factor that you should pay attention to when preparing the source materials for assembling a chain saw with your own hands is the power of the corner grinder. The power depends on this, and, consequently, the performance of future saw equipment. Consider the purpose of the future tool. If you are going to perform simple and short.Lived household tasks, then the capacities up to 2500 watts will be enough for you.

Experienced self.Use users also recommend not using new corner grinders, but to give preference to tools that are already in use.

Useful tips

In the manufacture of with your own hands, such a mechanism as an angular grinder from a chainsaw should be used exclusively good materials. The protective casing in operation gives a certain guarantee of cover and safety.

As for grinding circles, it is better to give preference with a diameter of 115 mm. Such discs can withstand high speed, unlike circles with a diameter of 230 mm. Large increase the chance of failure of equipment.

A corner grinder from a saw made on its own can be used for processing wood, operations with metal products, work with stone, brick and other construction work.

Alteration of a variety of tools and the use of devices based on a saw engine is considered a very useful and interesting origin of activity. Such a lesson develops engineering logic, expands human capabilities.

As a result of such a lesson, a person gains valuable experience, as well as multifunctional productive equipment, which can be widely operated in the household. Such an assistant as a corner grinder from a chainsaw, greatly facilitates life and saves the financial resources of a person.

DIY nozzle nozzle

The nozzle can be built on your own. It will take a set consisting of the following elements:

To build a nozzle, just focus on special drawings.

Begin with a thorough study of the instructions. The tank of the chainsaw must be freed from oil and fuel. The clutch and tire is removed from the case. Equipping the pulley is carried out.

The belt mechanism is connected to the central disk designed for cutting. This will change the frequency of speed of the main shaft. The nozzle is fixed using studs. Suitable for those used to fasten the aggregate tire.

Whether the nozzle is connected to the groove, so this element must be checked for reliability.

There is a quick method in which tires and other extension cords do not use. It is enough to attach a special adapter to the clutch, which allows you to fix the cutting disk.

It is recommended to take into account several nuances:

  • The belt does not cost at the top of the tripod cup related to clutch. This will lead to poor operation of the equipment. The belt will begin to fail, so the clutch is replaced with a pulley.
  • The rotation of the chainsaw disk at the time of turning on its motor indicates that the clutch failed. Use such an unit is unsafe, its functionality is reduced.

Nozzle. Corner grinder for chainsaws: how to choose the finished or do it yourself

To make a corner grinder (benzoresis) from a chainsaw you need a minimum of effort and money. To solve this problem, special transition sets are sold, which are installed instead of the tire. Within the framework of the article, we will analyze what they are how they function and whether it is possible to do it with their own hands.

The best nozzles are cutting with aliexpress on the saw STIHL, Partner, Champion, Carver, Huter, Husqvarna

Today, the nozzle on the chainsaw, including the type of “corner grinding”, can be bought without problems at any gas tool store. There are no problems with the installation either, t. To. A detailed instruction is delivered with it, having studied which you can install a corner grinder on a chainsaw with your own hands, with the exception of cases when the nozzle is selected incorrectly.

The nozzle is not universal corner grinder, it needs to be chosen for a specific chainsaw model. Manufacturers of nozzles do not indicate in the documents a complete list of models of chainsaws for which it is intended, which makes it difficult to choose the right choice.

It is best to buy such a nozzle for Aliexpress, t.To. For a low price, we get a good quality device. Very often in Russia they buy the same nozzles and sell 2, or even 3 times more expensive.

According to reviews left by visitors, we compiled a certain selection of nozzles for specific grades of chainsaws. For the convenience of choice, everything is designed as a table.

Chainsaw Disk diameter, mm Price, Where can I buy
STIHL MS 170, MS 180, MS 210, MS 211, MS 230, MS 250 180 1530 Buy on AliExpress
STIHL MS 260, MS 270 230 2300 Buy on AliExpress
Husqvarna 137-142, 235, 236, 240, 365 230 2310 Buy on AliExpress
Husqvarna 340, 345 (350,440,445,450) 180 1510 Buy on AliExpress
Huter BS 40, 45, 62 230 2200 Buy on AliExpress
Huter BS 40, 45, 62 180 1530 Buy on AliExpress
Partner 350, 351, 352, 371 230 2250 Buy on AliExpress
Partner 350, 351, 352, 371 180 1490 Buy on AliExpress
Oleo-Mac 937, 941c, 936, 940 180 1510 Buy on AliExpress
Partner 350S. 360S 180 1530 Buy on AliExpress
Universal nozzle for Stihl, Partner, Husqvarna, Huter, Carver, Patriot, Partner 150 2420 Buy on AliExpress
See also  No oil in chainsaw chain

The presented in the tables may vary slightly, so to find out the current price for the nozzle angular grinding grinder for the chainsaw, follow the link “Buy to Aliexpress” in the table.

How to choose?

When choosing a nozzle for your tool, first of all, you need to familiarize yourself with its technical documentation. If your model is not indicated in the list of chainsaws for which it is intended, this does not mean that it is impossible to install the nozzle of the corner grinder on it.

20 Grinder Chainsaw Kit worth it?

To verify compatibility, it is necessary to compare the diameter of the crankshaft of the chainsaw with the diameter of the landing hole on the pulley from the set of the nozzle (you need to remove the clutch from the chainsaw).

Information on the removal of clutch from the chainsaw can be found in this article.

The leading pulley of the nozzle can have several types, we’ll talk more about the species a little later. When choosing, it is necessary that the view of the leading star of the chainsaw and pulley of the nozzle coincides, otherwise it is not possible to install the pulley instead of clutch.

Types of pulleys

There is no official classification of pulleys and clutch of the chainsaw by type, but it would be more convenient if it were. We will try to explain the differences between the pulleys in an understandable language and show photos.

Pip type “Stihl 180”. A closed cup for installation in a regular place, instead of clutch, combined with a pulley. The pulley is unlimited, the diameter of the landing hole corresponds to the diameter of the crankshaft with the needle bearing installed on it. Used in Stihl MS 180, 170, 250 chainsaws.

A hollow pulley installed on the leading star of the chainsaw, without removing the clutch. Can have several options, depending on the step of the star.

The advantage of this type is ease of installation (for STIHL MS 180 with a closed clutch, in those chainsaws where the clutch is open, it will be necessary to remove it) and low cost (they can be sold separately as spare parts).

Such a pulley is more universal, can be used in Husqvarna, Partner, Taiga and other Chinese analogues.

For clutch, which provides for the possibility of replacing a leading star, most often such are installed on professional chainsaws, manufacturers make special pulleys. Unfortunately, we did not find photos of a pulley with such a landing one, but there is a photo of clutch and a replaceable link, looking at which you can understand how it looks like.

We examined the most popular pulleys of pulleys, but this is far from all that can meet on sale.

Now we suggest you watch a video in which the master shows and explains how to make a corner grinder from a chainsaw with a purchased nozzle. By the way, this video uses a low and expensive pulley, it could be replaced with a pulley without a cup that we talked above.

DIY installation

How to install a nozzle. Not everyone knows an angular grinder on a chainsaw, so we will tell you more about this.

Installation work, you should start, oddly enough, with the cleaning of the chainsaw. It is necessary to remove the side cover, tire, chain and blow the chainsaw with compressed air, small particles of wood are compressed and accumulated under the side cover, which, when disassembling the clutch, can fall into the bearing.

Next, it is necessary to unscrew the candle and limit the piston stroke with a piece of not thick and a dense rope, with nodules imposed on it. To do this, you need to put the rope into the cylinder through the candle hole. These manipulations are needed in order to tightly block the piston stroke, and, accordingly, the crankshaft and unscrew the clutch.

How to make a nozzle with your own hands

It is not as easy to make a nozzle yourself a nozzle. A corner grinder as it might seem at first glance. Even having all the necessary elements, two pulleys, a belt, a shaft with a fastener for a disk and an old tire, you will need to tinker, adjusting everything to its place.

Remember that any change in the factory design of the saw leads to automatic removal from the manufacturer’s warranty.

Below the photo of a real copy of the nozzle made by yourself.

At first glance, everything is fine, but if you look closely, it is clear that the belt is installed on top of the standard clutch cup. Such a design cannot work normally, t. To. The belt will constantly fly. It must be finalized by installing the pulley instead. And the rest is not bad, everything is taken into account up to the tension mechanism.

There is another option to make a gas tank, it is to install an adapter for fastening a cutting disk directly to clutch, t. E. Abandon the use of a tire or other extension cord. This option is shown in the video below.

install, corner, grinder, chainsaw, nozzle

The video shows how, after starting the engine, the gas tanker disk immediately starts to rotate, this means that the clutch does not work. Use a tool without clutch is dangerous and inconvenient.

How to install a nozzle-corner grinder on a chainsaw?

Self.Installation of corner grinding grinding for cutting metal should be started with thoroughly cleaning the chainsaw. To do this, the operator must sequentially disconnect the side plastic cover of the protective case, directing and the circuit installed on it. After that, it is necessary to blow the details of the saw with compressed air from the spray can. This will help get rid of small sawdust, which can accidentally get into the clutch mechanism of the chainsaw.

See also  How to unscrew a nut on a chainsaw. Changing the star champion eliminating the backlash of the leading star

The further algorithm of actions is as follows:

  • After cleaning the parts of the chainsaw, you need to carefully turn the candle. If necessary, the part must be cleaned of clusters of soot and tarry deposits;
  • Next, it is necessary to lock the piston. To do this, through the standard holes to install a candle inside the cylinder, you need to stick a skein of a rope with nodules tied on it;
  • Then the operator must remove the factory clutch from the crankshaft of the motor and install the pulleys of the ugly grinder instead of the built-in leading star;
  • After that, you need to install the remaining parts of the chainsaw and proceed to the installation of nozzles for cutting metal;
  • To do this, you will need to install the nozzle-angular grinder instead of the saw headset of the saw, using 2 fasteners for this.

After the listed actions, the operator will remain to check the level of the standard of the standard nozzle belt-ugly grinder.

Metal disk gas troops. Namesakes of the gas apparatus

During construction and dismantling recently, a disk gas tank has been used much more often than a gas apparatus. The unit became the “namesake” due to the gasoline engine of internal combustion. Compared to all disk cutting tools (corner grinding, end saws, metal saws), benzoresis is the most powerful unit, which is possible to cut concrete, stone, metal, marble, asphalt and much more. Especially builders value the unit for a greater cut depth-30-40 cm.

Externally, gas tanks for metal resemble a massive chainsaw, but instead of a chain saw. A large disk with a protective casing. The weight of the smallest unit is 9 kg, so for convenience, the models are even equipped with carts for transportation. Basically, gas tapes are divided into two groups. Devices designed for dry cutting and, accordingly, for wet. The cost is more expensive at the cost, since the cutting of materials is accompanied by water cooling mounted in a protective casing.

Working with a device without water cooling, you should be prepared for a number of inconvenience-firstly, there will be many times more dust, so you should use a respirator and protective glasses without fail. Secondly, cutting should be accompanied by constant “respite” for cooling the disk-every half a minute 15 seconds. Such units are cheaper, but you should take into account that when dry cutting, parts and discs are much faster, so if you purchase it for constant operation, it is better not to save.

Benzorezes have highly specialized varieties. So, the strooboresis is equipped at once with two discs located in parallel on one axis, which allows you to cut channels with the same width along the entire length of the cut, without preliminary marking and measurements. The rail cut is equipped with a special mechanism that allows you to fix the unit on the rail and achieve a greater depth of cutting. There are also models with bright chrome casings that are used in rescue operations and in the dismantling of buildings in conditions of poor visibility.

How to make a gas tank for metal with your own hands

It is not as easy to make a nozzle yourself a nozzle. A corner grinder as it might seem at first glance. Even having all the necessary elements, two pulleys, a belt, a shaft with a fastener for a disk and an old tire, you will need to tinker, adjusting everything to its place.

Husqvarna’s homemade copy of the nozzle on the chainsaw. The casing was used from a conventional corner grinder. A reasonable solution.

At first glance, everything is fine, but if you look closely, it is clear that the belt is installed on top of the standard clutch cup. Such a design cannot work normally, t. To. The belt will constantly fly. It must be finalized by installing the pulley instead. And the rest is not bad, everything is taken into account up to the tension mechanism.

Amazing GADGET For ANGLE GRINDER !?#128558;#128526;

Remember that any change in the factory design of the saw leads to automatic removal from the manufacturer’s warranty.

We suggest watching a video whose author tells how to make a corner grinding grinder from a chainsaw with your own hands using an old tire. The option is budget, but dangerous, t.To. There are no protective reviews. We strongly do not recommend using such structures, they are dangerous.

We recommend watching an interesting video, the author of which also made a nozzle for a Husqvarna chainsaw with his own hands.

There is another option to make a benzorer, it is to install an adapter for fastening a cutting disk directly to the clutch, t. E. Abandon the use of a tire or other extension cord. This option is shown in the video below.

The video shows how, after starting the engine, the gas tanker disk immediately starts to rotate, this means that the clutch does not work. Use a tool without clutch is dangerous and inconvenient.

You can make a corner grinder from the chainsaw, a special nozzle will add such functionality, you can install it yourself. Do it with your own hands is not necessary at all, t. To. There are factory ones on sale, which are designed taking into account safety requirements. You can work with such a nozzle where there is no way to connect electricity, otherwise, it is easier and more convenient to use the usual corner grinder.

| Denial of responsibility | Contacts |RSS