Manual tile cutter and how to use it correctly

There are two types of tiles: these devices are electrical and mechanical. The first type is suitable for industry or work at a construction site. Manual models are used for cutting tiles at home.

Household tiles are found of three types:

  • Roller. The device consists of a handle and cutting roller. It is used as a separate tool or is used together with a saw station.
  • On bearings. This option is used when it is required to cut strong ceramic tiles with a thickness of more than 16 mm.
  • Mechanical. Due to the presence of a hard carriage using the device, you can perform accurate cutting.

How to use manual tile cutter correctly

Before using a manual tile, it is necessary to check its condition. All parts should be without visible damage, the cutting video should rotate without jamming. Its surface should be properly round, without burrs and potholes. Moving the carriage with it should also be carried out without jerks and jams. As a rule, for these purposes, a radial bearing is provided in the design of manual tile cutter. It is also worth checking the condition of the bed, before the operation of the tile cutter it is necessary to clean its surface from visible contaminants.

  • Marking the surface of the tiles with a conventional building pencil according to the required sizes.
  • The tile is located on a tile cutter so that the marked fishing line for the trimmer cuts coincides with the trajectory of the carriage, on which the cutting video is fixed. It is important that the distance to the cut from the edge of the tile is at least 10 mm, otherwise it will turn out to be a sloppy edge.
  • The carriage is carried out along the markings with a slight pressure. It is important at the moment to feel the required pressure value so as not to pushing the tiles, but also to get a cut of the required depth so that the icing of the tiles is cut. It is allowed to carry out the roller on the surface of the tile only once, otherwise the cut can turn out to be uneven.
  • Now the tile cutter handle rotates to the working position, the field of which it lowers with a sharp and confident movement, as a result, the tile is carefully broken down along the previously obtained cut.

Experts advise soak it in water before cutting ceramic tiles. A drop of machine oil applied along the cut line also simplifies the cutting process. You can also read an article on the topic of how to cut the tile with a tile cutter and without it.

And for a more detailed analysis, the use of manual tile cutter, I recommend watching the video (on the example of the tileproofer Walmer).

And one more (for example, tile cutter Rubi TX-N).

It will be convenient to work with a manual tile, if the volume of work is not too large, and the hardness of the tiles is small or medium. In the case of a stronger tile, it is better to resort to the use of an electric tile cutter.

Manual tile cutter

The tank cutter in its design is equipped with a very sharp cutter, presented in the form of a small disk or roller. The cutter is made of high.Strength materials with the application of diamond spraying. Not many know how to work with such a tool, despite the simplicity of its design. The principle of its work is that the tile is not completely cut, but breaks. In order to fix the product, there is a special clamping mechanism.

The carriage with the roller moves along the two guides, which are made of metal. The video thanks to the guides moves on the surface of the tile, thereby making the furrow. The movement of the video is provided at the expense of the handle, which is connected to the carriage. A handle is controlled by a person.

Low quality cutters are quickly dulled, so when choosing, pay attention to the cost, since cheap models will never have a cutter with a spray of diamond. Dressed cutters should be replaced if the tool provides for such an opportunity.

How to cut tiles with a tile cutter correctly

Working with manual tiles is not particularly difficult. If possible, you can train on a piece of unsuitable tile. How to use a manual tile, we will find out later.

  • First, the tool should be installed on a flat and solid surface. This depends not only the final result, but also your safety.
  • The fishing line for the trimmer of the required cut is drawn on the front side of the tile.
  • As soon as the lines of cuts are drawn, the material should be placed on the working basis of the tool.
  • The tile should be rested on the far side of the tool, and then adjust the fishing line for the cutting line on the line.
  • The handle connecting to the cutter should be moved to yourself.
  • We proceed to the cutting process. To do this, slightly press the handle, after which we draw it along the entire length of the material. One such movement is enough from yourself to the extreme side of the material to get a furrow.
  • After that, press the handle slightly so that the tile breaks in the place of the resulting furrow.
See also  How to adjust the cupboard on a walk -behind tractor. Adjustment and adjustment of the cigarette light on a walk -behind tractor

When working with tiles, it is important to remember that all movements should be smooth, since the slightest incorrect or not confident movement will lead to the fact that the tile will break in the wrong place. A cut with diamond spraying allows you to get a fairly accurate furrow along which the material breaks easily and accurately.

It is important to know! The occurrence of roughness is not excluded at the place of capture. You can grind it with a hand file.

The video below presents how to correctly cut ceramic tiles easily and quickly.

Safety rules when working with a tile

In order to use the manual tile, it was as safe as possible and at the same time the result of the work was high.Quality, some safety rules must be observed, namely::

  • Before starting work, you need to inspect the tool used, so that you can determine all the breakdowns and irregularities of the guides in time, then find and eliminate visible damage to the tile cutter.
  • You need to go through the tile a couple of times, and at the same time, all movements must be smooth, without any shocks.
  • Do not forget to additionally check the tubular guides. They should be perfectly clean, without dust and dirt. Eliminate from them pieces of tiles, traces of the solution and, ultimately, to improve the work. Lubricate with a small amount of machine oil.
  • In addition, you also need to pay attention to the cutting disc itself. His condition should be perfect, in no case with curved, and rotation around the fastening axis should occur without any difficulties. It is worth noting that no extraneous sounds should also arise during the work of manual tile cutter.
  • In order not to get any injuries, it is best to work in special glasses and gloves.
  • Some experts also recommend checking the water supply to the disk, which makes the work simpler.
  • It is necessary to start work only after the disk gains those turns that can be called maximum.

Manual tiles. How to use it correctly, many people have been asking recently, but in fact there is nothing complicated in this process. Every inexperienced beginner will be able to cope with work. If you still can’t cut off the tiles you need, then on our website you will find a video with the most detailed instructions that will allow you to find out all the details and nuances of this type. Do not forget about safety rules, because your health largely depends on this and, of course, safety.

Frequently asked Questions

It is necessary to wet the tile? No, dry tiles are well cut. Grease, in the form of drops of oil, can be added when working with floor tiles or porcelain tiles. The cut rate depends on the attached effort? Depends, but partly. Subtle, 6 ~ 8 mm tile, can just split, so clear uniform movements are more important here. Porcelain stoneware will require great effort, but there is a risk of damaging (deform) a bed or other parts of a tile cutter. It is necessary to choose the “golden” middle, and this comes with experience. It is necessary to apply additional points of the support? Yes, especially when the edges of the tile output outside the bed are more than 150 ~ 200 mm. In this case, a strong support is placed comparable in height with the base of the tile cutter, for example, a wooden bar or wedges. How to cut porcelain tiles? Tiles up to 10 ~ 12 mm thick can be mastered using a classic tile cutter. This is available to experienced craftsmen who know the behavior of durable material. It is advisable to use an inexperienced users to use a corner grinder with a diamond circle. How to quickly learn to work on a tile cutter? In general, the operation is quite simple

But, it is important to feel the cutting process itself here, to learn how to control your movements and the efforts made. Someone will be enough for someone, someone will not have enough weeks

See also  How to work with an electric screwdriver on wood. Safety measures during the operation of electric screwdriver

There is only one advice in this case. To practice on one or two tiles, if there is no time for longer practical training.

Types of tiles

Modern models of tile cutters are used not only for cutting ceramics, clinker, glass and stone, but also allow you to apply risks and perform the next break, bite the edges of the tile element, completely cut or saw the product.

Manual

A manual or mechanical type tool with its principle of action is similar to a traditional glass cutter, but is distinguished by restrictions on the thickness of the cut material. A cut of the glazed layer is performed by means of the cutter, after which the tile is broken. The tool is a special clamp type of plowmen and has built.In glass cutter.

With the help of a tile cutter, an incision is made, after which the tile is broken

Using a manual tool, you can adjust the elements in shape and size by cutting, cutting holes on flat materials, direct and curly cutting, as well as the formation of all kinds of recesses and cutting at an angle of 45o.

The tile cutter is convenient in that with its help you can make the elements, preserving the desired shape and sizes

The main advantages of manual tiles are represented by absolute mobility, small weight and compact dimensions, independence from the electric network and safety in operation. The subjective factor in assessing the disadvantages is the general performance of the mechanical tool, directly depending on the professional skills of the master performing the work.

Electric with water and air cooling

Models with water cooling provide rapid and high.Quality cutting of ceramics or porcelain tiles, are represented by a cutting diamond disk and a working base equipped with a special pallet into which water is collected.

With the help of electric tile cutter, you can process ceramics faster

Thanks to cooling with liquid, overheating and premature wearing of the equipment is excluded, and the risk of excessive dust clusters on the desktop is also reduced. Models with disk fixing in the lower part of the case are operated with the movement of tiles and a coolant floodplain in the pallet. For models with a disk installed in the upper part, the supply of water through special pipes directly to the equipment section is characteristic. Thus, the most accurate cutting and fast cutting of the edges of the tiles are performed.

Electric equipment can process more solid materials

Audiobook Propellers

The productivity of the electric tool is characterized by power indicators, as well as the size of the installed disk and the type of materials processed. Models that have a capacity of 1000 watts are used to cut ceramic tiles, and a 4000 W tool can easily work with more solid materials, including stone.

A modern water.Cooled tool cope with the most intense loads, and can also guarantee the receipt of pure cut without chipping. Air cooling system is a less common version of the equipment, which is due to the inability to use with too much work. The tool and the processed material without the presence of a system of special cooling are heated greatly, which is inconvenient in professional work.

Types of tiles

Modern models of tile cutters are used not only for cutting ceramics, clinker, glass and stone, but also allow you to apply risks and perform the next break, bite the edges of the tile element, completely cut or saw the product.

Manual

A manual or mechanical type tool with its principle of action is similar to a traditional glass cutter, but is distinguished by restrictions on the thickness of the cut material. A cut of the glazed layer is performed by means of the cutter, after which the tile is broken. The tool is a special clamp type of plowmen and has built.In glass cutter.

With the help of a tile cutter, an incision is made, after which the tile is broken

Using a manual tool, you can adjust the elements in shape and size by cutting, cutting holes on flat materials, direct and curly cutting, as well as the formation of all kinds of recesses and cutting at an angle of 45o.

The tile cutter is convenient in that with its help you can make the elements, preserving the desired shape and sizes

The main advantages of manual tiles are represented by absolute mobility, small weight and compact dimensions, independence from the electric network and safety in operation. The subjective factor in assessing the disadvantages is the general performance of the mechanical tool, directly depending on the professional skills of the master performing the work.

Electric with water and air cooling

Models with water cooling provide rapid and high.Quality cutting of ceramics or porcelain tiles, are represented by a cutting diamond disk and a working base equipped with a special pallet into which water is collected.

See also  How to make a circular from a corner grinder. Final recommendations

With the help of electric tile cutter, you can process ceramics faster

Thanks to cooling with liquid, overheating and premature wearing of the equipment is excluded, and the risk of excessive dust clusters on the desktop is also reduced. Models with disk fixing in the lower part of the case are operated with the movement of tiles and a coolant floodplain in the pallet. For models with a disk installed in the upper part, the supply of water through special pipes directly to the equipment section is characteristic. Thus, the most accurate cutting and fast cutting of the edges of the tiles are performed.

Electric equipment can process more solid materials

The productivity of the electric tool is characterized by power indicators, as well as the size of the installed disk and the type of materials processed. Models that have a capacity of 1000 watts are used to cut ceramic tiles, and a 4000 W tool can easily work with more solid materials, including stone.

A modern water.Cooled tool cope with the most intense loads, and can also guarantee the receipt of pure cut without chipping. Air cooling system is a less common version of the equipment, which is due to the inability to use with too much work. The tool and the processed material without the presence of a system of special cooling are heated greatly, which is inconvenient in professional work.

Cut the tiles with a tile.Cutting cutter: General beginning

After the preparation of the tile cutter for operation, you can proceed to cutting the tiles. This will need an accurate surface marking. So, for this you can use a regular construction pencil or, for example, a marker. We apply a fishing line for a trimmer marking with it. Before cutting floor tiles with a tile.Cutter or wall tiles, it is necessary to clearly fix it relative to the cutting roller. To do this, in some designs of tile cutters, special grades are used, which allow for the fully motionless position of the tile. If there is no such selection, then the tile must be held with one hand, and the handle with the carriage of the cutting roller. The other.

Immediately before receiving the incision, it is necessary to apply a drop of machine oil to the surface of the cutting roller, which will significantly reduce the friction of the surfaces of the roller and tiles, which, in turn, will improve the quality of the resulting section.

How to cut ceramic tiles with a tile cutter?

After the tile is precisely exhibited along the marking line, it is necessary to raise the tile cutter so that the surface of the roller touches the front side of the tile. Now you can move the handle over yourself with a smooth movement. At the same time, it is very important to control the pressure force to the surface of the tile. With insufficient pressure, the incision will turn out to be small for successful breakdown of depth tiles.

When You Only Have a Jigsaw to Make a Straight Cut

If you press the handle too strongly, then ugly cracks may appear on the decorative layer of tiles. If you cut the tiles for the first time, then it is best to take a piece on which you can experiment, since it is likely that an even cut may not work.

Important: the incision should be obtained for one longitudinal movement of a carriage with a cutting roller, otherwise repeated risks will not coincide with the first, so the incision will turn out to be inaccurate or unnecessarily rough.

How to cut tile tiles with a tile?

The tile in composition is practically no different from ceramic. Only the color of the base is different. It is lighter. However, this practically does not affect the process of cutting tiles, so it is carried out similarly to ceramic tiles.

So, the incision is made. Now we put the tile on a flat horizontal surface and raise one of the edges, the cut most remote from the line. Now carefully, but at the same time, we pressed quite sharply on the tile in the area of ​​cut risks so that the tile breaks exactly along it.

If the incision is not accurate enough, then its edges can be tied with a grinding stone or sandpaper. Neatly longitudinal movements can achieve the smooth edge of the cut. It is necessary if the tile is attached to the end from the other. If it is placed in the corner, then grinding the edge is not necessary.

The tile is cut, now you can start laying it.

And also it is worth looking more clearly how to cut the tile with a manual tile cutter.

| Denial of responsibility | Contacts |RSS