Homemade muffler for a chainsaw with your own hands

Good day, dear readers of the Blog Subscribers Andrei Noac. Here, recently, my neighbor in the country drilled trees on his site and harvested firewood. Naturally used a chainsaw.

Although he did not acquire a professional saw, but a household, but she was very noisy. While he worked all the neighbors, including me, are tired of this noise.

Here the thought came to my mind, tell him how to make a muffler for a chainsaw with his own hands.

Video, assembly tips for homemade tools

The basis of each home.Made device made of a chainsaw represents its use as a universal drive, which can be used for different devices. With their help, you can cut, pump water, remove snow, move and saw.

make, chainsaw, your, hands

Pylorama from a chainsaw is a device that is used to cut wooden products by means of a chain installed on the tire. Sawing occurs due to the operation of the engine, the engine can operate on gasoline or diesel, the power indicator does not matter.

Today we will tell you how to create a sawmill from a chainsaw, whether special skills and drawings are needed for this, you will also see a video on this topic.

How to create home.Made chainsaws?

All the capabilities of the chainsaw in your home.Made device can be realized through different nozzles and additional devices. The basis of any home.Made device made on the basis of a chainsaw is the usual principle of selection of its engine power, the device you need is attached to the output shaft.

Basil as a tool for creating devices with your own hands is just in handy, because it has such characteristics:

The excellent clutch design is also of great importance, since it is able to protect the saw systems and nodes from possible overloads and breakdowns. Any of a do.It.Yourself chainsaw tool is with tightness, which makes it suitable for use regardless of the situation.

make, chainsaw, your, hands

What devices can be assembled from a chainsaw with your own hands?

All homemade gas.Based devices are divided into simple and complex.

Simple devices include the following:

Among the complex mechanisms and devices that can be assembled with your own hands:

  • Chainsaw saws;
  • Snowmobiles and snowmings;
  • Helicopters;
  • Power plants;
  • Aerosani;
  • The knives are solid.

Any brands of chainsaws can be used at the heart of these devices, it all depends on the required power for the correct operation of the device that you collect with your own hands. Most often, products from chainsaws and other devices use products of the following brands:

DIY chainsaw pylorama

Discharged drawings can be found on the websites of companies that produce woodworking structures. However, the images of the schemes in any case will only be approximate, since they mainly depict devices with high power, which will not be a reasonable solution for household needs due to their high cost and high fuel consumption.

Also, a circuit for the manufacture of sawmills can be made independently, armed, for example, by training video. The most important thing is to place the base, bed and runners. It will also be necessary to install a clamping case between the railway outlines. And don’t forget to think over your pylorama in advance.

The course of work on the manufacture of sawmills with your own hands

At the same time, make sure that the machine is safe and stable. When working in a closed room, the hood should be provided. It is extremely undesirable to put a sawmill in rooms with high humidity.

After you have decided on the future installation site of your sawmill, you can proceed to the manufacture of its foundation. It should be firmly fixed to prevent hull displacements or vibration in the future.

make, chainsaw, your, hands

Ready.Made elements of the base of the structure must be mounted strictly parallel to the ground, so it recommends using the building level for this purpose. The mounts should be as strong as possible, as materials for fastening, you can use:

When you finished setting the base, you need to lay the rail track. In this case, the base of the structure must necessarily be made of their metal. Depending on the weight of the sawmill and the conditions for its use, the following products may be the basis:

Then you need to set the installation of fasteners. Fasteners in this case is a long frame fixed with different clamps on both sides. It should be installed in such a way that the wood laid over the fasteners lay down smoothly. The fastenings should in no case be circular, otherwise the chains and tires will not work correctly.

We go to the mobile part of the sawmill. She also has the form of work that will move along the rails. This structural element is installed on special videos, which are fixed on the frame as tightly as possible.

Also, the mobile part should contain clamps to support the stove. In this case, they must guarantee the cutting of the material both horizontally and vertically. Fastards for this part can be different, most often used boxes based on sheet steel or clamps. However, experts recommend using metal plate.Based girths for fastening.

Operation of a do.It.Yourself sawmill

When you finished your work on the manufacture of a chainsaw sawmill, it should definitely be checked in terms of stability.

Then you should work with a tree in test mode. We fix the log on the base and squeeze it with a vice. Additionally, you can put the markings in the canopy and on the sawmill. For marking, you can use roll panels or thin strips of metal.

Small the sawmill and very slowly lead it towards the log to perform a test cut. When working, do not forget to put on personal protective equipment so that your face and hands are reliably protected:

Before the trial of the mechanism, be sure to check how well the log is attached, also check the structure for serviceability and the presence of fuel in it.

The chainsaw itself should be tightly fixed, and its tire must have a central position in relation to the marking of the cut.

Why rustles a chainsaw?

All chainsaws have only one significant non.Prosperity. This is a noise when working, which in some places (cottages, personal plots) interferes and irritates many people. If the noise from a working saw prevents the concentration, then such an option as headphones that suppress the noise is possible. But everyone around them will not walk in the headphones, while someone is noisy.

The clogged or not corrected muffler is the reason that the engine is constantly stalling or does not start at all.

It happens that the chainsaw works normally at small speeds, but it is worth adding gas, as it sneezes and stalls right away. The reason, as a rule, is that the exhausts cannot pass through the muffler clogged with Garya and are forced to move in the opposite direction. To do this, it is enough to remove it and clean it, if it is of course versed, if not, you will have to dry it with hot air using a hairdryer.

See also  How to change the pumping on a chainsaw. Handles

The most important reason for the muffler pollution is an excessive amount of oil, which is diluted with gasoline and as a result of which settles on its walls.

If you decide to independently clean the non.Collapsible muffler, then keep in mind that you can not do this on dry hairdryer, since hazardous substances are extremely harmful to health.

Although most of the manufacturers of chainsaws and try to muffle the engine noise if possible, but this does not lead to anything good and first of all affects the power of the apparatus.

Professional chainsaws, for example, Husqvarna cannot work quietly at all, since power and speed are very high, which leads to a strong noise. Trying to independently muffle the roar of the motor, while maintaining high performance is extremely difficult. But there are people who use an ordinary bucket of water and a plastic tube, lowered into the water at one end, and the other end is screwed to the exhaust pipe. There are effectiveness from such actions, the sound of the motor becomes quieter.

Survival tools

We offered you many options for self.Making from a chainsaw, and believe that this is far from the whole list. Having a gasoline engine, you can invent more and more useful and funny devices.

And you know what you can still do from the chainsaw “Friendship”?

If you have experience in making such devices, share your ideas with readers in the Комментарии и мнения владельцев!

We do it yourself

In order to save money and time spent in search of the right workshops, I advise you to make a muffler at home. This is not as difficult as it seems at first glance.

All you need is a regular sheet of 1 mm stainless steel, an iron tube of smaller diameter than that of a muffler, stainless wool, basalt fiber and a little patience.

  • We take a sheet of steel and wrap around the rollers, in the end we get a round tube, but an oval pipe will definitely be needed. To do this, heated by welding and then crush the tube, an oval shape should be obtained;
  • If you have a finished pipe of a suitable diameter, then this is good, if not, then you need to make it using a welding machine. To do this, take a metal sheet, mark the necessary dimensions and cut with welding. Then we make a pipe, the seam should be thin and without bugs;
  • When the finished pipe turned out, you need to make as many holes as possible in it, and you can make holes both randomly and in strict order, this does not play a role;
  • Next, take the cooked stainless wool prepared in advance and begin to wrap the pipe from the outside. This is necessary so that there is no blowing of the muffler lining;
  • Then we wrap it over stainless wool with basalt fiber (this is the most suitable material) and so that it does not slip, we fasten with wire, which should be thin and at the same time strong;
  • We insert the wrapped pipe into the future apparatus and grind it all with sandpaper, pay special attention to the seams and joints so that they do not stick out much;
  • When you do all this, the resulting unit must be attached to the chainsaw as strong as possible so that it does not fly at the right time.

Such a home.Made apparatus, if everything is done correctly, will serve for a long time and significantly reduce the noise of the motor, it works well on the firmicity of friendship. Another plus of a home.Made muffler is that it will cost you a meager amount. You will only spend time, but it’s worth it.

This version of the muffler can also be applied: to put partitions in the pipe, which is in the muffler and thereby reduce the noise level of the motor. This is due to the fact that noise itself is a strong fluctuation in air, which with great speed comes out of the muffler out.

In order to reduce the noise of the work, just drill holes in the pipe and insert partitions into them at equal distances. It will turn out a lot of divisions and the gas will be in stages to go out, while the pressure and noise will decrease. Respectively, the speed of gases will fall, which will lead to a decrease in noise.

If you want to make the gases leave the cylinders faster, thereby reducing the engine efforts so that the saw productivity increases, remember that there will be several times more noise.

In order to achieve this, you need a straight.Flowing muffler, which can be made from the pipe according to the sketches of the old muffler, unscrewing and subsequently using all the bolts and nuts.

I advise you to choose a pipe from steel, then the muffler will last longer. If there is no suitable steel pipe, then you need to make it using a steel sheet. Using a welding machine, you can make the required tube in diameter and size.

Everything is provided for the plant, everything should work as a whole and if you try to change anything on your own, including improving the muffler without any drawings, then this is quite difficult and not everyone can get it.

At best, power will be lost, and at worst. The chainsaw will stop starting.

For such chainsaws such as Stihl 180, it is better to buy a native muffler, which you can change yourself and without any problems.

Therefore, if you have certain knowledge and the ingenuity works well, then you should try to independently make an additional muffler, thereby saving money and it may be possible to make a device that will really do the work of the chainsaws much quieter and you will not have to constantly quarrel with your neighbors or with others you are people.

Block: 4/5 | Summer characters: 3988

How to make a silent benzopilo with your own hands

The question of how to make a noiseless chainsaw with your own hands is asked by almost every owner of a private house or a summer cottage. The tool at high speeds creates a loud noise, which spreads hundreds of meters. Loud sounds annoy the neighbors, the master himself is tired of them. Having understood the nature of this phenomenon, you can make the work of the chainsaw quietly by spending a minimum of time and means. The roar occurs in the explosion of gasoline in the cylinders and from the contact of exhaust gases with air. Partial elimination of these factors leads to a decrease in noise.

How to make a muffler for a chainsaw at home

Good day, dear readers of the Blog Subscribers Andrei Noac. Here, recently, my neighbor in the country drilled trees on his site and harvested firewood. Naturally used a chainsaw. Although he did not acquire a professional saw, but a household, but she was very noisy. While he worked all the neighbors, including me, are tired of this noise. Here the thought came to my mind, tell him how to make a muffler for a chainsaw with his own hands.

Why rustles a chainsaw?

All chainsaws have only one significant non.Prosperity. This is a noise when working, which in some places (cottages, personal plots) interferes and irritates many people. If the noise from a working saw prevents the concentration, then such an option as headphones that suppress the noise is possible. But everyone around them will not walk in the headphones, while someone is noisy.

Amazing Fastest Skill Cutting Big Tree ChainSaw Machines, Heavy Biggest Felling Tree Machine working

The clogged or not corrected muffler is the reason that the engine is constantly stalling or does not start at all.

It happens that the chainsaw works normally at small speeds, but it is worth adding gas, as it sneezes and stalls right away. The reason, as a rule, is that the exhausts cannot pass through the muffler clogged with Garya and are forced to move in the opposite direction. To do this, it is enough to remove it and clean it, if it is of course versed, if not, you will have to dry it with hot air using a hairdryer.

See also  Sabre saw from a jigsaw with his own hands

The most important reason for the muffler pollution is an excessive amount of oil, which is diluted with gasoline and as a result of which settles on its walls.

If you decide to independently clean the non.Collapsible muffler, then keep in mind that you can not do this on dry hairdryer, since hazardous substances are extremely harmful to health.

Although most of the manufacturers of chainsaws and try to muffle the engine noise if possible, but this does not lead to anything good and first of all affects the power of the apparatus.

Professional chainsaws, for example, Husqvarna cannot work quietly at all, since power and speed are very high, which leads to a strong noise. Trying to independently muffle the roar of the motor, while maintaining high performance is extremely difficult. But there are people who use an ordinary bucket of water and a plastic tube, lowered into the water at one end, and the other end is screwed to the exhaust pipe. There are effectiveness from such actions, the sound of the motor becomes quieter.

Why do you need a muffler

This is a special device, thanks to which the noise from the operating engine becomes an order of magnitude lower, but does not muffle completely and this does not suit many.

Of course, saws are now sold, in which the muffler is able to suppress the noise several times, but this immediately affects the work of the saw.

Therefore, if you want to do the operation of the motor even quieter than the plant, then you should try to put an additional muffler, making it yourself.

The Worlds Most Powerful Chainsaw Stihl MS 881- Our Biggest Sponsor Yet

If you show ingenuity and the same saw of the Urals can be forced to work much quieter and it will not affect its performance in its performance.

We do it yourself

In order to save money and time spent in search of the right workshops, I advise you to make a muffler at home. This is not as difficult as it seems at first glance.

All you need is a regular sheet of 1 mm stainless steel, an iron tube of smaller diameter than that of a muffler, stainless wool, basalt fiber and a little patience.

  • We take a sheet of steel and wrap around the rollers, in the end we get a round tube, but an oval pipe will definitely be needed. To do this, heated by welding and then crush the tube, an oval shape should be obtained;
  • If you have a finished pipe of a suitable diameter, then this is good, if not, then you need to make it using a welding machine. To do this, take a metal sheet, mark the necessary dimensions and cut with welding. Then we make a pipe, the seam should be thin and without bugs;
  • When the finished pipe turned out, you need to make as many holes as possible in it, and you can make holes both randomly and in strict order, this does not play a role;
  • Next, take the cooked stainless wool prepared in advance and begin to wrap the pipe from the outside. This is necessary so that there is no blowing of the muffler lining;
  • Then we wrap it over stainless wool with basalt fiber (this is the most suitable material) and so that it does not slip, we fasten with wire, which should be thin and at the same time strong;
  • We insert the wrapped pipe into the future apparatus and grind it all with sandpaper, pay special attention to the seams and joints so that they do not stick out much;
  • When you do all this, the resulting unit must be attached to the chainsaw as strong as possible so that it does not fly at the right time.

Such a home.Made apparatus, if everything is done correctly, will serve for a long time and significantly reduce the noise of the motor, it works well on the firmicity of friendship. Another plus of a home.Made muffler is that it will cost you a meager amount. You will only spend time, but it’s worth it.

This version of the muffler can also be applied: to put partitions in the pipe, which is in the muffler and thereby reduce the noise level of the motor. This is due to the fact that noise itself is a strong fluctuation in air, which with great speed comes out of the muffler out.

In order to reduce the noise of the work, just drill holes in the pipe and insert partitions into them at equal distances. It will turn out a lot of divisions and the gas will be in stages to go out, while the pressure and noise will decrease. Respectively, the speed of gases will fall, which will lead to a decrease in noise.

If you want to make the gases leave the cylinders faster, thereby reducing the engine efforts so that the saw productivity increases, remember that there will be several times more noise.

In order to achieve this, you need a straight.Flowing muffler, which can be made from the pipe according to the sketches of the old muffler, unscrewing and subsequently using all the bolts and nuts.

I advise you to choose a pipe from steel, then the muffler will last longer. If there is no suitable steel pipe, then you need to make it using a steel sheet. Using a welding machine, you can make the required tube in diameter and size.

How to make a corner grinder at home from a chainsaw, with your own hands?

One of these devices is the nozzle on the chainsaw of the corner grinder, which allows you to turn one tool with your own hand, having spent a minimum of cash and time costs on this. Let’s figure it out a little more.

At the same time, an independently adapted benzobolgar will have such advantages:

  • The autonomy and mobility that the saw’s gas drive and complete independence from power supply gives it;
  • Increased capacity, many times superior to their electrical second.Graders;
  • Cost, at least several times less compared to the acquisition of a factory corner grinder.

Benzorez from a saw with a nozzle can be used to cut such materials:

In addition, very often they are adapted for stripping welds. With most of the nozzles available today, cutting circles are used. Reinforced or diamond and circular saws.

What is needed to start work?

In order to remake a chainsaw in a corner grinder at home, you will need, first of all, to buy a factory kit, the correct installation of which is extremely important.

The finished set of supply of such a device usually contains:

  • Leading pulley, or as it is often called, a drum;
  • Casing for protection;
  • Belt equipment;
  • There may be a key or hairpin, although they are often used the same as on the gasoning itself.

At the same time, a detailed instruction should be included with a detailed description of each part.

Instructions for installing this adapter

  • Familiarize yourself with the instructions for the nozzle “Corner grinder” in detail;
  • We free the tank from the oil in the saw itself;
  • Remove the tire, the clutch drum;
  • On the leading asterisk, namely her drive shaft, pulleys are equipped;
  • Using the kinematic principle of the belt mechanism, it should be aggregated with the direct axial center of the disk for sawing. This, in turn, will change the frequency of the main shaft revolutions;
  • Fixing the nozzle using spit elements. If they did not go in the kit, you can take ordinary studs, which fixed the chainsaw tire. Wherein. Often the holes in the nozzle, their diameter and localization can be selected individually, depending on the specific modification of the chainsaw. From the same will vary the size of the size of the cutting disk, which can be installed.
See also  Mini drill with their own hands is very powerful

Thus, when buying, it is very important to pay attention to the serviceability and reliability of the groove for consolidation. After all, it will depend on him whether it will be possible to integrate an additional device to the main. Gasoline hacksaw or not.

What else needs to be paid attention to?

Firstly, a grinding disk may not withstand such a load and fall apart right in the midst of work. Accordingly, the tool itself will lose its performance and may fail.

But this is not the worst thing that expects lovers. The worst option is associated not only with health damage, but also by the threat to the life of both the operator himself and those who are nearby.

Therefore, before deciding on such an improvement, it is worth weighing all the pros and cons, and after making rational conclusions and actions.

Useful homemade chainsaws, what options?

The masters of the chainsaws are not always used for direct purpose, it usually serves as a powerful drive in all kinds of mechanisms. The ingenuity of our craftsmen gave rise to numerous and very diverse homemade homemade chainsaws, surprising their originality.

The advantage of a chainsaw, as a drive, is compactness, low weight and high power. Any master who is able to blame the part can perform locksmiths, use a corner grinding and a welding apparatus, can make interesting structures based on a chainsaw.Based.

In order for the apparatus, the drive of which is a chainsaw, it is functioning, as it should, accuracy in the size of the parts and attentiveness during assembly are necessary. So, knowledge of the basics of drawing and constructing mechanisms in this case will be useful.

What homemade homemade chainsaws have already come up with

The first use of a chainsaw in terms of many developers is to dissolve with its help a log for a beam. But, if you hold the chainsaw manually, the accuracy of the cut suffers, especially with the length of the beam of four to six meters. So that the incision does not leave the desired line to the side, they came up with a harshly fix the chainsaw in the frame, which moves along the guides.

  • In such a sawmill, the log lies motionless, and the carriage with a chainsaw is located at the desired height, depending on the desired thickness of the beam, is fixed with four screws.

Thanks to the exact movement of the frame, it turns out an even and neat cut. In the same way, you can also saw boards, but due to the large thickness of the cutting chain, you turn out a lot of waste.

Boil-winter vehicles

They managed to use a chainsaw as an engine for a homemade snowmobile. Here the design is much more complicated than sawmills. In this case, in addition to the manufacture of a snowmobile frame, it will be necessary to make a suspension with shock absorbers, carry out gas control and clutch to the steering wheel.

In addition, it will be necessary to find drawings (or design yourself), along which the caterpillar of the snowmobile will be made, and think over the transfer of torque from the chainsaw to the caterpillar.

A centrifugal clutch with a chain and a clinic belt is placed on such a snowmobile (after all, the chainsaw of its transmission does not have).

In order to increase the thrust on the drive shaft of the caterpillar, the gear is installed with a large diameter than the drive asterisk of the chainsaw (the so.Called “traction gear”).

For the steering mechanism, as a rule, they take the steering wheel from a scooter and a bicycle and can be redone without problems so that it turns the skis of a snowmobile. Such transport requires an engine with a capacity of at least five horsepower, so if you make a snowmobile, use Ural chainsaw.

If we consider transport for the winter, then it is much easier to snowmobile, the design. In them directly to the shaft of the chainsaw installed behind, a large screw is connected, which is the movement.

True, the low power of the chainsaw limits the cross.Country ability of such a sled ice on the river or a rolled road. For racing in snowy fields, you need an engine of at least 12 horsepower. The same restrictions do not allow to replenish homemade homemade chainsaws also with a background helicopter.

Unless if you use two engines and the master can make them work in agreement.

Homemade from the chainsaw. The engine is great

This is not to say that from this design there will be a lot of sense, but many make such a peculiar transport, simply to check themselves and to others to show their skills in the designer and mechanic.

The old bicycle is taken as a basis, which is not a pity, and the well.Known chainsaw “Friendship”. The transfer of force to the wheel is performed using a bicycle circuit and a toothed pair.

Sometimes they take a mountain bike, a variator gear and a gearbox are installed between the chainsaw and the wheel (to slowly, but confidently move, you need to transfer 18: 1). Shock absorbers and brakes are installed on such a “advanced” model.

Boat engine

This design in the implementation is simple, the transmission is not needed with the boat motor, you just need to grind the adapter that will transmit torque from the driving gear to the standard rowing shaft and boat screw.

Http: // www.Youtube.COM/Watch?V = rmroghwqsk usually, or a home.Made engine is attached on a boat so that the rowing shaft at a slight angle is immersed in water, or do not lazy to assemble a gearbox that transfers the rotation of the shaft at right angles to the screw to the screw.

Motor cultivator from a chainsaw

Many people managed to make a simple motor.Cultivator from the chainsaw, in which the pair of gears increases the traction force of the engine and transfers to the drive wheel. It must be understood that the insufficient power of the saw engine will not allow you to make a real one.Axle tractor in this way.

Resourceful masters show their talents to construct snow.Removing equipment. Models based on a three-watt stihl chainsaw, which are installed for simplicity of design, on the sledge of the sled, are known. The main thing is to make a high.Quality screw node and choose a gear pair, and the motor.Rope engine is the same as rotating.

  • For such a snowplower machine, a galvanized steel is taken for the manufacture of a fence device, blades are made from cord, thick rubber, and a conventional sewer plastic pipe will serve as a snow discriminator.

Chain.Based helicopter

Although many inventors are looking for ways to make a small single-sized chainsaw-based helicopter, nevertheless its power in order to fly, there is not enough. As engineering calculations have shown, at least four forced chainsaws that work in agreement and with an increased number of revolutions are needed for a mini-helikopter.

Motoburg made of chainsaw, will greatly facilitate the installation of the foundation on screw stilts, installation of a fence or treating holes on winter fishing. Just keep in mind that the chainsaw engine should be connected to the ice.Axle rifle through a lowering gearbox (worm gear).

A chainsaw winch

Using a motorope, it is easy to make a winch, with an effort up to one and a half tons. Such a device will help to raise a massive load to the height, remove the cutting tree, pull the boat on the shore or on the road a stuck car.

make, chainsaw, your, hands

Useful in the household a small gasoline power station. A generator is attached on a strong frame, a fuel ruptral “Druzhba” or “Ural” and connected it to a gearbox. The pulley is fixed on the gearbox shaft, from it the cord belt transfers rotation to the generator, which will provide the household with electricity in case of disconnecting or the absence of a power grid.

| Denial of responsibility | Contacts |RSS