Tables for mitre saws. How to make a crosscut saw table with your own hands? Dressing table for mitre saw

Trimming saw table is a device that serves as a base for the installation of this type of saw, which facilitates the performance of facing works on different types of materials in a strictly vertical plane, as well as at the required angle.

Working table for the installation of trimming saw carries a solid base, where this cutting tool is mounted, trimming saw. Such a design you will like is made of metal profiles of different cross-sections not different metal, and additionally durable types of plastic. Optionally, additional elements (lateral expansions, shelf guides and stops) can be made of timber (board, plywood, chipboard or OSB).

Dimensions of the table depend on the geometric dimensions of the material to be sawn (lumber, metal profile, tubes as it is called reinforcement). The design you will like the constant as it is called sliding, allowing you to change the surface area of the table, which also depends on the material to be processed and the conditions of work.

The table, depending on the nature of the work performed, you will like made stationary as it is called portable installation, with the device legs as it is called providing for the installation on a flat horizontal surface above the floor level.

A table for a crosscut saw with their own hands

Support table, where there is an option to perform trimming of various materials through the installation of a trimming saw. Buy in construction tool stores, where a wide range of such products is available. However at there are cases that there is no possibility to buy that exactly what is necessary for the process of implementation of works, then a question arises, and how to make it independently.

Initially it is necessary to answer several questions on which the parameters of the constructed product do not depend on the material that will be used, these are:

  • Where it will be installed.
  • At what level we will perform the fixing on the floor otherwise speaking another surface.
  • What material and what geometrical dimensions are to be processed.
  • What type, fixing method, not the geometric dimensions of the end saw to be installed on the table to be made.

Description of the product to be made

Trimming table is a horizontal base on which surface the cutting element is placed and fixed. This construction is usually made of metal profiles, strong plastic and strong wooden boards. Together, these materials ensure a strong, stable position for the cutting element and make the saw easy to use, especially when working with long materials.

Based on the length of pipes or boards that you plan to saw, the table should be made of a certain size. Therefore, for a comfortable sawing such a tool is often made sliding, however, you can also stop at the permanent model.

The table can be stationary or, with the installation of additional wheels, portable, but in any case, the surface must stand firmly on the floor and not move during the processing of products.

Preparatory stage

During this period it is necessary to answer the questions that were described above, and then draw a sketch of the product to be constructed.

It is desirable to calculate all geometrical sizes and knots of fastening, both elements of the table (legs, working surface, additional elements) and knots of fastening to the base.

Work on the table

The frame can be made of metal profiles of different cross section, which are available. The geometric dimensions of the frame depend on the available space where the equipment will be installed, the size of the crosscut saw and the type of installation (stationary or portable).

See also  How to make a tape grinding machine. How to make a tape grinder with your own hands?

On the frame it is necessary to foresee the place of the saw installation, which should correspond to the available one (geometrical dimensions, height of the lower mark of possible cut, possibility of change of spatial positioning).

Regardless of the size and shape of the frame, it is necessary to provide for lateral extensions of the table, which can be made of durable plastic, sheet metal or plywood. The side expansions of the working surface will facilitate the sawing of long workpieces. If the side extensions are located below the level of the trimming saw surface, then it is necessary to install special shelves, on which the workpieces will move.

Side stops will also be useful, thanks to which, after their fixation, it is possible to cut a large number of workpieces according to the set size. You can use angles made of different kinds of metal as stops, equipped with clamping elements by means of which the stops are fastened to the working surface, as well as other elements (barrels, bars, etc.).д.) made of wood or plastic, which can be fixed on the worktable surface.

For the convenience of working with a large number of workpieces, it is necessary to make clamping plates. For this purpose, you can use sheet metal or metal profile, which must be equipped with devices that allow to perform their rigid fixation on the working table. It can be a bolted or other connection, with one of the plates placed under the table surface (lateral extension), and the other above the surface of the workpieces. Clamping is done by tightening the bolted or screwed connection using nuts or shanks.

  • Mounting the trimming saw. When the frame and additional elements have been completed, the frame must be placed on the prepared surface and rigidly secured there. After that, perform the installation of the trimmer saw and the extras made.
  • Functional check. After completing the installation of the saw and other elements that facilitate work on this type of cutting tool, it is necessary to check its performance.

If to test the saw it is enough just to plug it into the electric network, then to test the convenience of the work on the made table it is necessary to perform some work, facing of the prepared blanks. In doing so, make sure that:

  • The geometrical dimensions of the table allow for all types of operations that are supposed to be performed on this equipment;
  • The table and trimming saw are rigidly mounted on the floor surface or other plane;
  • The size of the extensions corresponds to the size of the workpieces, they can be easily moved and fixed;
  • The alignment of the stops and pressure plates is not hampered by any irregularities on the working surface of the table and frame elements.

Support table for truncation saw, it is an element of design that allows you to work with high labor productivity, ensuring the safe performance of operations for processing various types of materials.

Greetings! On our site you will find a huge number of useful articles and tips about modern construction, repair and interior design. For your convenience, all the articles on the site are divided into thematic sections. Also we are always ready to support the conversation in the Комментарии и мнения владельцев, write.

Table for mitre saws with their own hands

make, crosscut, table

Support table, on which you can perform trimming of various materials by installing a trimming saw, you can buy in stores of construction tools, where a wide range of such products. But sometimes there are cases where there is no opportunity to buy exactly what you need to perform the work, then the question arises, but how to make it yourself.

Initially it is necessary to answer several questions, which depend on the parameters of the constructed product and the material that will be used, this:

  • Where it will be installed.
  • How the fixing will be made on the floor or other surface.
  • What material and what geometrical sizes are to be processed.
  • What is the type, fixing method and geometric dimensions of the miter saw to be installed on the table to be made.
See also  Steel grade of bandsaw blades for metal

preparatory phase

At this period should answer for themselves the questions that were described above, and then draw a sketch of the constructed product.

Prepare the building tools and the materials required and then begin the work.

Performing the table fabrication work

The frame can be made of metal profiles of different cross sections, which are available. The geometric dimensions of the frame, depending on the available space, where the equipment will be mounted, the size of the crosscut saw and the type of installation (stationary or portable).

How to make a simple cross cut sled for your table saw. DIY

On the frame it is necessary to provide a place for installation of the saw, which must correspond to the available (geometric dimensions, height of the lower mark of the possible kerf, the possibility of changing the spatial location).

Regardless of the size and shape of the frame, you must make provision for lateral extensions of the table, which can be made from strong plastic material, sheet metal or plywood. The presence of lateral expansions on the work surface facilitates the sawing of long workpieces. If the lateral extensions are below the level of the mitre saw surface, it is necessary to install special shelves for moving the workpieces.

Side stops will also be useful, thanks to which, after their fixation, it is possible to cut a large number of workpieces to a set size. You can use angles made of different kinds of metal as stops, equipped with clamping elements by means of which the stops are fastened to the work surface, and other elements (bosses, bars, etc.).д.) made of wood or plastic, which can be fixed on the worktable surface.

For the convenience of working with a large number of workpieces, it is necessary to make clamping plates. For this purpose you can use sheet metal or metal profile, which must be equipped with devices to make them rigidly fixed on the work table. This can be a bolted or other connection, with one of the plates placed under the surface of the table (lateral extension) and the other over the surface of the workpieces. Compression is accomplished by tightening a bolted or screwed connection using nuts or shanks.

  • Mounting the mitre saw. When the frame and the additional elements are finished, the frame must be mounted onto the prepared surface and rigidly fastened there. Then install the mitre saw and the trimmer pieces prefabricated.
  • Functional testing. After completing the installation of the saw and other elements that facilitate work on this type of cutting tool, it is necessary to check its performance.

If for testing of the saw it is enough just to plug it in the electric network, then to check the convenience of the work on the made table it is necessary to perform the certain work, facing of the prepared workpieces. In doing so, it is necessary to check that:

  • The geometrical dimensions of the table allow to perform all kinds of operations that are supposed to be performed on this equipment;
  • The table and cut-off saw are rigidly mounted on the floor surface or another plane;
  • The size of the extensions corresponds to the size of the workpieces, they are easy to move and fix;
  • The alignment of the stops and clamping plates is not hampered by any irregularities in the working surface of the table and elements of the frame.

Support table for mitre saw, it is a structural element that allows to work with high labor productivity, which ensures safe execution of operations for processing of different types of materials.

The entry Crosscut saw table with their own hands first appeared BuildingPomodnik.

See also  How to make a mini drill from a motor

A table for a crosscut saw in handicrafts

Table for mitre saw. a device that serves as a base for the installation of this type of saws, facilitating the performance of works on facing of different types of materials as in a strictly vertical plane, and not at the required angle.

The concept of this machine

I, probably, like many people, have a hobby. I like to invent, design, build something with my own hands, but my approach to it is quite peculiar. In one of my articles I already told about making a CNC machine from what I had accumulated in my garage (of course, much had to be added). I’ve already tried a lot of things with this machine, including various bas-reliefs and wood crafts. Actually, they fell into my heart, I want to continue to work with wood using a machine with cpu, but I do not want to create a full carpentry (although I may come to this).

To make something on a CNC machine, you need a workpiece and not always have enough width or thickness of a board, then you have to glue the workpiece together from several pieces, resulting in a shield. Preliminary workpieces for the future board must be processed to make all planes as even and perpendicular as possible. You probably have a question right away. “why not just buy that shield.”. Because of the hardwood boards are not everywhere to find and even less of them are made qualitatively, and the price of these boards frankly say. so-so.

On the basis of these reasons and much more weighty. I decided, on my own interest, to make a machine tool which could cut boards lengthwise, even if desired, and would not take up much space.

I admit that the idea is not new, and I saw it on the Internet, but the execution is slightly different.

Circular saw or circular saw, how to choose?

To summarize and systematize the above information, and to make the comparison clearer, I suggest you study the table:

Parameters for comparison Mitre saws Handheld circular saws Circular saws on the table
Mobility medium high medium
Power high medium high
ability to work in wood and aluminum yes available is
Workpiece retention yes no no
Cutting precision high medium high
Ease of maintenance high care demanding minimal maintenance care demanding
Longitudinal cut no there is available
Cross cut is is yes
Safety high medium medium
Multifunctionality high low medium
Cutting adjustment at 45% available available yes
Adjusting kerf there available available
Backlash minimal acceptable minimal
Variety of accessories minimal high minimal
Range of mountable circular saw blades high medium high

In fact, there are a lot of parameters to compare the performance of saws, especially frequent question from buyers, whether one or another job can be done with one tool. Of course not. First things to keep in mind. a safety rule, because neglecting it can result in serious injury. Also, in the case of self-tooling you make design changes that remove the tool from warranty service.

Saws. The tool is popular enough for home repair, woodworking, or professional construction work. And as it was mentioned above, most of the working operations are identical, but, in general, you can’t perform the whole range of work with a single saw.

Manual circular saws will always be in the lead in sales, as they are cheaper, lighter and often craftsmen remake them into a table circular saw. Easy to carry, store, and maintain.

Table circular saws. a great tool for both the professional and amateur, but you need the space to work with this tool, you can also torque, un-torque, and trim. The only thing you may face. The inconvenience of working with large workpieces, for them you need to buy a more expensive saw, or make additional stops yourself, broaching the workpiece you produce by hand.

| Denial of responsibility | Contacts |RSS