How to make a harrow for a walk.Behind tractor with your own hands

06 November 0 reviews

The same.Based tractor is the main labor and multifunctional unit in your household, because one single tractor is capable of a sufficient imagination and dexterity of the user, if not to do it, then for the most part to facilitate any production task. But the motornote, like a person, needs appropriate tools to complete this or that task, and they, as we know, are a plentiful number of varieties and forms. There are several types of Boron alone.

The processing of a harrow of milling land is an important stage in the cultivation of the earth before planting seeds, seedlings or tubers in it and pursues such practical goals:

  • Alignment of the surface of the earth;
  • Destruction of Комментарии и мнения владельцев;
  • Softening the surface of the soil, simplifying the process of planting, sowing, preservation of moisture in the ground;
  • Improvement of the assimilation of organic and mineral fertilizers;
  • Surface cleansing of plant residues and destruction of weed shoots.

For all this, humanity came up with a harrow that evolved from a trunk with hard branches in 3 modern type Boron: a tooth harrow, a disk harrow and a rotary harrow. Therefore, we will try to tell in this article how to save on buying harrows for a walk.Behind tractor by making it with your own hands.

The principle of robots and the arrangement of the harrows for motoblocks

The first harrow that a man made with his own hands had the form. They were made not very long, so that there was an opportunity to maneuver in the fields, but the mass of the harrow was too great, which made it possible to break the blocks of the earth after plowing and maintain natural moisture in the ground.

Today, this unit is used both independently and with other types of devices for the type of seeders and cultivators. The harrow copes not only with earthen blocks, but also covers the soil leaving moisture inside it. The technical characteristics of the harrow allow it to collect dry plant residues and pull out the roots of weeds.

This device that has passed and managed to modernize so much that when it is used, human efforts are required. There are several types of harrows:

The technical characteristics of the harrow comply with generally accepted standards and have a calculation based on the mass that occurs on one disk or tooth. Accordingly, based on this classification, there are harvests of heavy, medium and lungs. And their use can be special or general.

Types of Boron for motoblocks and tractors

Firstly, consider the rotary harrow for the walk-behind tractor, it relieves the top soil layer very well. With the help of a rotary harrow, after collecting grain crops, the Earth is cultivated. It is also a good option when leveling the soil. Thanks to it, the need for mowing grass disappears. The working depth is established on the basis of what tasks are set. It usually fluctuates from 5 to 7 centimeters.

For the tractor, it does not matter what the harrow will be, it is more important and more valuable to take into account the sizes necessary for soil processing. If this is a field of several hundred hectares, then the wider the harrow, the better.

Large.Sized harrows are made specifically for motoblocks, so making it with your own hands will not be difficult. She is attached to the walk.Behind traffic.

Farmers concluded: for good effective work in the field, harrow, or rather, its blades should have a slanting shape. The teeth should be located at an angle to the plane of the earth, this allows you to cut easily, and thereby, leafing the soil.

See also  What oil is needed for a walk -behind tractor. Transmission oil for a walk -behind tractor - the choice of a suitable reducer lubrication agent

Disk harrow

The second type of harrow is disk, the use of dry soil. The disk harrow performs all the same functions as the rotary, only differs in the design: it uses discs, each of them stands on a separate axis. But, unfortunately, this type of harrow breaks more often.

The classic tooth harrow is used in those places where a flat and loose layer of soil is needed. The teeth are located evenly in the frame, their length ranges from 25 mm to 45 mm. The size of the teeth depends on the weight of the harrier, the greater the weight, the greater the teeth. The disadvantages include the speed of the efficiency of the walk-behind tractor, the power should be significantly high, and be at least 12-14 km/h. If you are faced with a choice, then for work in small territories, a rotary harrow for a walk.Behind tractor is perfect.

Rules for the harrowing of a motorcycle unit

Each case of using such a multifaceted agricultural machinery is quite individual, but there are a number of general recommendations that should be followed to improve the quality of the result and facilitate the process:

  • Before starting work, they advise you to make a test launch, checking if there is enough effort for effective work (if necessary, increase the pressure in the system or change the transmission), whether the depth of the input, the degree of grinding at the output, whether the attack angle is sufficient.
  • Working with a harrow, especially if it is homemade, it is important to monitor the angle of the location of the working body, both to the frame and in relation to the processed surface. If it is strictly vertical, and the efforts of the system for a full tear of roots will not be enough, it will simply drag the land in front of her, clogging herself with clods and residues of plants.
  • It is very convenient to satisfy a variable situation with land plots even on one field to place working tools in different rows of product under the different angles. Then, to get the best result, it will be possible to simply change the rows during work, or, if this is not possible, weaken or tighten the fasteners where it is necessary.
  • If it was noticed that the teeth, discs or knives of the rotor clogged. The working tool is extracted to the surface and is carefully cleaned.
  • It is important to ensure that in order to increase the efficiency of processing and the absence of the need for repeated passages of non.Succumbing sections, each working tool “led” its furrow, and their complex as a whole was evenly distributed by frame and had the same deepening compared to neighbors.
  • The depth of the aisle can be adjusted by increasing the weight of the weighting body of the walk.Behind engineer.

The rest of the nuances, as a rule, are comprehended only by practice, when each operator chooses a convenient form of work.

Homemade harrows for motoblocks

It is much more pleasant if the harrow on the same.Based tractor is made with your own hands. So today we will tell you how to make a harrow on your own.

make, harrow, walk, tractor, tooth, advantages

For motoblocks, such types of Boron are used:

The rotary harrow allows you to effectively remove the upper soil layer. The depth of processing can be adjusted. From 4 to 8 centimeters. The width of the harrow is a very important factor that affects the speed of land cultivation in the garden. Obviously, the larger the harrow, the greater the power of the walk.Behind. Rotor harrows have drums with sharp metal stripes (see. Video) that are installed at an angle. Over, such a harrow allows you to remove the remains of plants from the soil.

Homemade harrows for motoblocks

It is much more pleasant if the harrow on the same.Based tractor is made with your own hands. So today we will tell you how to make a harrow on your own.

See also  What lubricant is needed for corner grind. Required amount

make, harrow, walk, tractor, tooth, advantages

For motoblocks, such types of Boron are used:

The rotary harrow allows you to effectively remove the upper soil layer. The depth of processing can be adjusted. From 4 to 8 centimeters. The width of the harrow is a very important factor that affects the speed of land cultivation in the garden. Obviously, the larger the harrow, the greater the power of the walk.Behind. Rotor harrows have drums with sharp metal stripes (see. Video) that are installed at an angle. Over, such a harrow allows you to remove the remains of plants from the soil.

make, harrow, walk, tractor, tooth, advantages

Harrow

Neva motoblocks, one of the leaders among small agricultural machinery. The harrow for the Neva, nothing differs from the bon for other devices, and you can buy them, everywhere.

Here is an example of a rotational harrow for the Neva and other motoblocks, whose shaft diameter is 30 mm.

RT-1,4 rotational harrow (two sections, 0.7m.) for Neva.

Designed for pre.Sowing and post.Harvesting soil.

Block: 4/5 | Summer characters: 590

Types Boron

Such devices are divided into three such types:

The harrow is intended for ground grinding

It is worth considering each of the species separately.

A tooth harrow

A tooth harrow popular today consists of several rows of teeth, thanks to which the soil is processed along with its loosening, as well as leafing. Differences in such models lies in a different number of teeth. Usually wide options are used with 4 or more gear rows.

Their use with motoblocks belonging to the category of traction is widespread. Most of the models of the Neva brand, as well as MTZ. Such species have a high clutch with the road, due to which a significant longitudinal force is observed. The harrow is often used after processing the site with a tractor. In this case, during operation, you can install special springs instead of teeth, which break less.

Disk harrow

Are active harrows. They are often used together with motor blocks related to the cultivator type. For use on traction, it is required to build a special shaft designed to select power. The disk harrow allows you to treat the soil due to its cutting using rotating discs. Such products have a different shape, from ordinary rectangular, to a cup.

LEMKEN. The Rubin’s arrangement of implements

The latter are more labor.Intensive in design, however, they allow you to wrap the layer, due to which plowing is partially carried out. Thanks to this, they are used to conduct shallow early processing of the upper soil before sunrise and before sowing potatoes or grain. To improve soil cutting, as well as reducing the level of resistance in the process of rotation of the formation, the edges of such discs have an uneven shape.

Rotor harrow

Such products are partly similar to a cultivator and disk models. This is due to the presence of rotating gear elements that crash into the ground and turn a certain part of it.

The rotary harrow has a distinctive feature, which consists in the small depth of soil processing, as well as the presence of many working teeth. In this case, the discs are at right angles, regarding the axis of rotation. In addition, the teeth have a small bend. Its radius depends on the clutch coefficient, which is available in wheels with the ground. So, with an increase in sliding, the bend of the teeth should increase.

A tooth harrow

In the process, this will allow you to push the soil almost at right angles. Thanks to this, its good aeration will take place. When such teeth come out, they slightly push the soil, due to which there is an extinguishing of small weeds, which have not yet allowed serious roots. The rotational harrow is used to cultivate the Earth, even if the rise of plants took place. In this case, there is no injury to large plants. Such models allow you to reduce the amount of fertilizers used, due to the fact that the substances in the process of aeration are well absorbed from the air, and the growth of the roots is also improved.

See also  How to make a coupling for a walk -behind tractor. Other details

Traditional harrow

Classic, or as it is also called, horse harrow is used to create a flat and loose surface. Also, this type of attachment equipment allows you to qualitatively cover moisture in the soil and thereby prevent its drying. The harrow carries out large lumps of the Earth to the required fraction, destroys weeds and removes the remnants of vegetation from the soil. The equipment is quite light and therefore used for surface treatment of the soil, grinding of land comers and shallow loosening before sowing.

make, harrow, walk, tractor, tooth, advantages

A tooth harrow for plant.Production motor blocks is made of special structural steel that withstands significant loads. Also, this equipment is well moistened by the soil after milling.

This type of harrowing equipment is a direct or zigzag frame that can be made with your own hands from a steel strip, a square pipe or corner, a hitch for a clutch with a walk.Behind tractor and teeth. You can fix the teeth on the frame by welding, or, having cut the thread on them, fix it with nuts. The working bodies on the frame are located at a uniform distance from each other, and their length can be 25-45 mm. Relative to the width of the equipment, then, for example, for the Neva walk-behind tractor, 500-600 mm will be enough. The presented video shows a tooth harrow in work.

Harrowing

You can also make a walk.Block harrow with your own hands and according to the drawing below. It will have to spend half a day to make such a hinged equipment, but it’s worth it.

Dental harrier scheme for a walk.Behind tractor

In order to make such equipment for a walk.Behind tractor, we need the following:

  • To a metal pipe of a square section, weld iron stripes, on which, in fact, the teeth with a thread cut on one side will be attached to the nuts;
  • The drawbar of our hinged equipment ends with a welded sleeve, through which, using a metal finger, a connection will occur with the used motoblock;
  • We make a stand with an adjusting screw to set up the height of the rise of the harrowing device to ensure uniform deepening of the working organs into the soil.

At least purchased factory equipment, at least Homemade harrow, to the walk.Behind tractor “Neva”, there is a feature of the accumulation of wet soil on the working organs with vegetation residues, as a result of which the cultivation of land can become ineffective. In order to easily and freely clean the teeth with a scraper or by any metal object, we will use the lifting lever of the unit.

The video shows the simplest dentist harrow for a walk.Behind tractor indicating the size.

Buy a hitch and trailer for a walk-behind tractor in online stores

When harrowing a harvested brown, Lander goes beyond the walk.Behind tractor at the average engine speed. About 2 km/h. Heavy soils require putting a load on a harrow, the weight of the cargo is selected experimentally. Lander is following a walk.Behind tractor, regulates the movement of the harrows with a walk.Behind handle. If necessary, that part of the harrow that does not deepen or is knocked out when moving forward is crushed by the foot.

The harrowing of a disk bar is similar to the cultivation of the soil. Work is carried out at speed 1.5-2 km/h. Lander is following a walk.Behind tractor, adjusting the movement of the harrows using handles. The axis of rotation of the harrow should be strictly perpendicular to the required direction of motion of the walk.Behind tract.

| Denial of responsibility | Contacts |RSS