Moped from a chainsaw assembly and drawings tips and recommendations

Do.It.Yourself motorcycle motorcycle is a way out for those men who do not want to spend on a car and its subsequent service and who do not like to pedal the bicycle pedal. In this case, a moped of a chainsaw and a bicycle, which you can assemble with your own hands in the garage, buying some necessary, missing details and spare parts will be a great way out of the situation. The process of alteration itself is not particularly difficult.

Before starting the assembly or in the event of questions, you can always turn to drawings and numerous video reviews available on the Internet.

How to make a moped from a chainsaw?

The dream of the youth of most of our fellow citizens was and remains a moped. It develops higher speed and has a structure, more perfect than the described mototor. Buy a ready.Made moped. Pleasure is not cheap. We will tell you how to make it from improvised materials.

make, chainsaw, simplest, home

  • A motor from a working powerful saw (in our version is a model of “friendship”);
  • 2 wheels from the old bicycle;
  • Pipe with a diameter of 2 cm (metal);
  • Cable;
  • Bicycle stars; as well as forks;
  • The old spare parts from the motorcycle are a ready.Made fuel tank, headlight, if desired and the seat, although it can be done with your own hands;
  • Steering part;
  • Gas lever.
  • Cook the frame to which we connect the wheels from the bicycle, fork, as well as a gas tank and a lantern;
  • We adapt the motor. The installation composition will depend on the configuration of the frame;
  • We fasten the gas tank and the battery;
  • We check that the newly installed elements do not dangle;
  • We make a chain gear. It will allow the wheels to take the torque of the motor and move. You can take a belt instead of a chain pulley. But we must not forget that its wear will be noticeably higher;
  • We set up the ignition system. We connect the battery and brake lever with it;
  • We adjust the exhaust pipe.

The assembly process is completed: you can start testing a moped.

How to make a single.Based chainsaw or a scooter tractor with your own hands

The simplest and easiest option for creating a home.Made walk.Behind tract is to remake it from a chainsaw. For these purposes, any model that you has at home can be suitable. Thanks to a powerful motor, light design and high performance, such homemade are well suited for effective cultivation of land on the site.

Home made Chainsaw Mill

Moped from a chainsaw

At first glance, the moped and drank absolutely incompatible things that cannot interact in any way. But this is erroneous and numerous craftsmen proved that making a moped from a chainsaw is quite realistic. But do not do enough, this unit also goes, and also transports its owner. The speed, of course, does not develop very large, but still better than walking on foot. You can take a bicycle as a basis for the design or do everything completely on your own. The cycle engine is striking in its endurance, but this is all expected from time.Tested saws.

DIY/Homemade ChainSaw Mill

make, chainsaw, simplest, home

The older generation is familiar with self.Propelled structures in the form of a bicycle with a motor. This technique is difficult to attribute to mopeds, but they no longer fall into the category of bicycles. A kind of “middle link”. A significant advantage of such an unit is a low fuel consumption and the ability to drive without rights. On the roads of social significance you can’t ride on it, but you can move around the rural streets and alleges.

The frame was subjected to changes, which was lengthened to bicycle or other wheels, depending on what is available. The fuel tank is also attached, the sitting is installed from the motorcycle and the headlight is attached for driving in the evening. A water system was developed as cooling the cycle motor. This was done so that the engine does not overheat quickly and the power does not fall.

See also  How to disassemble a chauter chainsaw. How to disassemble a chausopila Husqvarna

Simple homemade chainsaw motor.Cultivator

For the manufacture of a home.Made motor.Cultivator from a chainsaw, a engine is needed from a saw, several segments of the pipe and with.

Simple design of the frame and layout of the main nodes

Open a photo simple home.Made motor.Cultivator from a large size.

Picture “The device of the design of the frame of the motor.Cultivator with the engine from the saw”

The most optimal gasoline saws for remaking are “friendship”, “Ural”, “Stihl” and similar models with a large power supply. It is to this parameter that you should pay attention to the alteration of the bicycle to the moped. Some German chainsaws with large capacities are very good. The device should be selected with a power of at least 2 liters.With. And engine volume no more than 50 cm3. Cycologists from such units are the most hardy.

In order to make a motorcycle bike, it is not necessary to have a special technical education, but to understand the schemes and drawings, as well as have the skills of repairing garden equipment, preferably. Will not be superfluous and skills in working with a welding machine.

Choice of a chainsaw on a bicycle

The most important factor by which you need to choose a chainsaw for assembling a moped is the power of the power unit. The most suitable power is 2 horsepower, since less power will not be enough to start the bicycle movement. The volume of the engine should be no more than 50 cm3. Also, experienced drivers of home.Made mopeds recommend choosing engines from old mopeds or lawn mowers.

How to make a single.Based chainsaw tractor with your own hands?

To create such a home.Made unit, it is recommended to use special drawings. These schemes can be drawn on your own, if there is certain knowledge and an idea of ​​a walk.Behind tractor, or choose one of the proposed options.

Tips and recommendations

On the forums you can find a lot of useful tips, how and what to do the right thing when assembling a moped from a chainsaw and great. Fulfillment of simple wishes and parting words from practice will help Amators avoid annoying misses when constructing a moped from a chainsaw.

  • Since the improvement of your bike will significantly increase the load on all its nodes, first of all, you should make sure of the excellent condition of the bicycle.
  • The engine from the chainsaw after transformations will turn into a home.Made cycle motor, so the initial parameters of the engine should be strictly designed: mass. Up to 6 kg, volume up to 50 cubic meters. Cm.
  • In order to avoid fire hazardous situations, carefully test the condition of the fuel tank.
  • The transmission of the force on the wheel to the wheel depends on the correct installation and tension of the belt.

Kolyan:

“Friendship bought an old saw like scrap metal. Replaced the ignition, seals, rings, carburetor. And collected the engine on the new. He took the wheels for the great scooter, and digested a bicycle frame a little. I decided not to put the belts, but a chain gear. Stars 9 and 41 teeth. I did not draw any drawings, so everything somehow turned out to the eye itself. The gas tank from the old moped put. Wheels, of course, small diameter, so the landing turned out low, but it pulls normally.

Disadvantages: not very powerful, low landing “.

Biker:

“It will be useful to install a flashlight and dimensions on a home.Made moped, the speed is decent. I made a curtain on a regular bike turnover, you don’t blind the oncoming ones and light your way more ”.

On our site you can also familiarize yourself with the description and reviews of chain saws (battery and gasoline) of these brands: Bosch, Oleo-Mac, EuroLux, Taiga, Interskol, Hitachi, Eco, Forester, Poulan, Daewoo, Hammer, Union, Sturm Parma, bison, Champion, Huter, Echo, Patriot, Ural, Karcher, Carver, Husqvarna, Makita, Friendship, Kruger, Caliber, STIHL, as well as give feedback on the chainsaws of these brands, if you have something to say about the assembly quality and the experience of operating specific models of chain saws of these brands, write in the Комментарии и мнения владельцев your review, it will be very useful for our readers.

See also  How to sharpen a chainsaw chain on a chain sharpening machine

Also on the pages of our blog you can read articles about:

Kolyan:

“Friendship bought an old saw like scrap metal. Replaced the ignition, seals, rings, carburetor. And collected the engine on the new. He took the wheels for the great scooter, and digested a bicycle frame a little. I decided not to put the belts, but a chain gear. Stars 9 and 41 teeth. I did not draw any drawings, so everything somehow turned out to the eye itself. The gas tank from the old moped put. Wheels, of course, small diameter, so the landing turned out low, but it pulls normally.

Disadvantages: not very powerful, low landing “.

Biker:

“It will be useful to install a flashlight and dimensions on a home.Made moped, the speed is decent. I made a curtain on a regular bike turnover, you don’t blind the oncoming ones and light your way more ”.

On our site you can also familiarize yourself with the description and reviews of chain saws (battery and gasoline) of these brands: Bosch, Oleo-Mac, EuroLux, Taiga, Interskol, Hitachi, Eco, Forester, Poulan, Daewoo, Hammer, Union, Sturm Parma, bison, Champion, Huter, Echo, Patriot, Ural, Karcher, Carver, Husqvarna, Makita, Friendship, Kruger, Caliber, STIHL, as well as give feedback on the chainsaws of these brands, if you have something to say about the assembly quality and the experience of operating specific models of chain saws of these brands, write in the Комментарии и мнения владельцев your review, it will be very useful for our readers.

Also on the pages of our blog you can read articles about:

Which saw is suitable for use?

The most optimal gasoline saws for remaking are “friendship”, “Ural”, “Stihl” and similar models with a large power supply. It is to this parameter that you should pay attention to the alteration of the bicycle to the moped. Some German chainsaws with large capacities are very good. The device should be selected with a power of at least 2 liters.With. And engine volume no more than 50 cm3. Cycologists from such units are the most hardy.

In order to make a motorcycle bike, it is not necessary to have a special technical education, but to understand the schemes and drawings, as well as have the skills of repairing garden equipment, preferably. Will not be superfluous and skills in working with a welding machine.

Do.It.Yourself motion

Not every happy bicycle owner is delighted with the need to pedal and spend his hand. The more convenient and less costly costly motorized bicycle is.

Do not make a bicycle with a motor from a chainsaw of a chainsaw as it seems at first glance. This will need:

  • A bike;
  • Dawed with a power of a gas outlet of at least 2000 watts. This indicator will depend on whether it can move. As practice shows, engine power in 2 liters.With. It is enough that the motorcycle bike develops speed up to 40 km/h;
  • Tank for the future fuel tank;
  • Cable from the old bicycle;
  • The handle, so that there is the opportunity to regulate the throttle;
  • Bolted screeds, nuts and other small consumables for creating mounts;
  • Connecting elements to create a message from the engine.
  • We aggregate the drive shaft. Remove the rear wheel tire and put a tire with a diameter of up to 2.5 cm. This equipment will help to accept the engine speed, and like a gearbox, reduce the number of revolutions;
  • We weld the powerage stand. It will help to install the engine from the chainsaw;
  • Alteration of clutch. You can use centrifugal from the factory saw, connecting it to the wheel;
  • Adapt the gas tank. It can be located next to the engine, or on the frame;
  • We fix the wire from the incendiary system of the motor on one of the bicycle handles;
  • Attach a cable from a carburetor to the gas handle so that the control of the throttle is simple and fast;
  • Equip the motorized carcass with means of protection: mirrors, lantern, and proceed to the test of a homemade bicycle from a chainsaw.

As you can see, the engine from the chainsaw is not so difficult to put.

Homemade electric motorcycle with a capacity of 15 liters.With.

The article discusses an example of creating a powerful mototalist working on electricity. As an engine, a power unit with a capacity of 15 horsepower and an operating voltage of 48V is used here. Felt beach cruiser was taken as the basis. This model was chosen because for homemade it needed a strong bike with the right forms on which all the necessary elements could be placed. You can use another bicycle, the main thing is that the frame has the desired strength and bend. The primary goal was to place the center of gravity as low as possible to the level of the road.

See also  How to remove tank from a chainsaw. Similar notes

make, chainsaw, simplest, home

Materials and tools for homemade:-Briggs and Stratton electric motor;-as a controller for the Alltrax Ax 300A engine;-gas handle (Magura 0-5K OHM);-4x12V battery, 21A/h (acid-spins, hermetic); Moped chain. Disk brake of the type AVID BB7 160 mm;. Leading sprocket for 13 teeth;. Driven sprocket for 66 teeth;. Large switch;. 300A fuse;. Support for engine (stainless steel with a diameter of 21 cm, is installed, installed instead of a carriage).

And of course, worships, welding, cutting tool and so on will be needed.

Step one. Replacing a forking hard fork was removed from the bicycle. Instead of it, a fork with a shock absorber of Manitou is installed.

Since the foot brake was installed in the original version of the bicycle (it turns on, if you pedal back), in the area of ​​the dropouts it was necessary to make a special mount for installing a disc brake. To cut the necessary piece of steel, a hacksaw was used. Then a drilling machine was needed to drill the necessary holes for fastening the brake system.

Step third. The back of the rear sleeve was used as a double front. It had standard for Mountynbikes of attachment location for 6 bolts. As a result, 6 holes were drilled in the asterisk so that it would fit these 6 bolts. It is very important to accurately place the sleeve, the brake rotor and the star on one axis.

The brake mount is welded, the wheels are screwed to the bushings. It was necessary to bend the upper feather of the frame so that the driven star and the chain did not cling to it.

Step fourth. The mount for the engine is welded from the sheets of stainless steel. It is welded to the place of the carriage. The mount itself is in the ring, this ring was made from a piece of a lamppost. The width of the ring is 11 cm, and the diameter 21 cm. Given the size of the engine, the clearance is only 3 mm. So that the air flow could cool the engine, the ring was drilled on the drilling machine. Accuracy is important here, since during a skew the chain will constantly fly.

At the same stage, the steps are installed. The fasteners of the steps are made of a pair of lighting racks that the author cooked together. As for the steps themselves, then aluminum pegs for the omh.

Step fifth. The author removed the Ramyzavodsk Square Holder from the bicycle. Then he was shortened and welded to the upper feathers of the frame above the rear wheel. To increase the strength of the structure, an amplifying insert was installed. A rubber cap is put on a seatpost, and the saddle clamp is unfolding.

make, chainsaw, simplest, home

The batteries are held using special trays made of aluminum. The trays rivet to each other, and then fixed with the help of bolts to the right and left panel. In the center you can see the power switch. To make it easy to get to the contacts of the switch, the author made the panel asymmetric panels.

The controller is located under the upper pipe and installed upside down, while its contacts are deployed back.

After installing all the necessary elements and connecting wires, the bike was tested. According to the author, he accelerated quite intensively, while no one measured his maximum speed. According to estimates, he should ride at a speed of about 80 km/h.

The installed controller has quite flexible settings, it can be connected to the computer using RS-232 and adjusted the acceleration dynamics, and it is also possible to monitor statistics.

Get a selection of new self.Proceeds by mail. No spam, only useful ideas!

| Denial of responsibility | Contacts |RSS