We make a cultivator with our own hands

Suppose you have a land plot. You want to process it with a cultivator that you do not have. Otherwise, you just wouldn’t come here. You probably want to make such an unit yourself for some reason, whether it is the lack of money for the factory motor-cultivator, or just interest, make such a car yourself. In this case, you are lucky if you have an electric engine for 1.5-2 kW, gearbox, then you can easily make a cultivator with your own hands in just a day.Two.

The main details of a home.Made motorbiker are a gearbox and engine. First of all, we make a frame of the future cultivator, drill holes for installing the main nodes, and make handles to control the unit of two curved pipes with a diameter of 32 mm. Between homemade handles, it is necessary to put a pipe that will be like a spacer that increases the strength of the structure. To one of the handles, we will subsequently install the start button.

For the manufacture of the shaft, I used an unnecessary scrap, welded a star from the camshaft of the VAZ engine, and the chain and both stars were scald with metal, making a cover.

I connected a three-phase engine according to the standard “triangle” circuit, place the condenser button on the handle to make it more convenient.

Ground.Bending motorbace groundsups

Our cultivator must somehow ride. Select the necessary wheels. Remember that small wheels will get stuck in the ground and interfere with work. Too large wheels by a home.Made motor.Cultivator will be hard to twist. The selected wheels are fixed to steel corners, which are placed on the gearbox crankcase. Attaching wheels to your home.Made mechanism is not all. Fasten the soil to the wheels. With the help of them, the motor.Cultivator will better bite into the ground.

Take car springs or just corners and cut off the hooks of the desired diameter from them. In order to get the maximum effect, set the angle of hooks by 120 °.

When you finish working with the connection of all parts, you can use the made motor.Cultivator with your own hands for several years. If you want the unit to just break the whole land into large pieces, you will need to go quickly with it. The lower passage speed grinds the ground into the smallest particles. It all depends on the speed of working with the cultivator. Before using it, lubricate the shaft of the mechanism with oil so that the homemade is served without breakdowns longer.

By the same principle, you can also take the engine from the washing machine for a homemade motorbace. Disassemble a baby bike and adapt to your unit of sprockets and a bicycle chain. As a result, you get such a home.Made electrical cultivator. True, if you decide to make this unit with your own hands, keep in mind that the wire will constantly get confused and interfere. Due to the fact that the power of the mechanism depends on the network and the cable-you will not go further than it will allow its length.

DIY motor.Cultivator manufacturing

How to make a light motor.Cultivator with your own hands for a summer house? The irreplaceable equipment of this type in large summer cottages is obvious. They not only allow you to quickly dig a garden, but also, in the presence of some improvements, they are able to sprout tuber plants, as well as remove weeds from the surface of the virgin wolf. In fact, there is nothing complicated in the manufacture of a mini-engine with your own hands.

It is only necessary to have certain materials and tools on their assembly on their assembly. Otherwise, the process can take our time for no more than 2 days, and this is taking into account welding and processing the finished cultivator with paint and varnishes.

This must be done so that during the use of mini-models their main elements are not exposed to corrosion. As for the necessary materials, we will need the details of the following sample to create such a home.Made:

  • A cultivating nozzle made of arcs bent by an arc welded to a metal corner;
  • Frame and wheels from the old bicycle;
  • Iron or nylon tubes for the manufacture of motor block control handles.
See also  How to Rebuild a Makita Electric Screwdriver Battery. How to repair an electric screwdriver battery and its malfunctions

Now you can proceed to the installation process. To begin with, cut off the corner grinding or hacksaw for metal the back of the bicycle, while leaving only the front fork with a wheel.

We weld the cultivating nozzle for the walk.Behind tracts so that it is behind the wheel and sits tightly on the ground. This must be done so that during operation, by pressing the device, you can normally sprout the soil.

Then it will be necessary to put on tubular extension cords on the steering crossbars, which, if necessary, can be slightly curved for the convenience of control. To achieve the most dense compound, they should be boiled along the contour with electrode welding, after which the product will be ready for use.

HOW TO INSTALL BOAT STEERING SYSTEM

In addition to this model of a light cultivator, there is another option. Livestock motoblocks. They are well suited for virgin processing, since their design is equipped with disks with pointed spikes that rotate on the axes of this mechanism. They can also be made from improvised materials, while such mini-cultivators will not take up much space on the farm. In order to collect such a device, the following details will be needed:

  • A steel axis with bearings on which rotating mechanisms will be installed;
  • Five metal disks with pointed teeth;
  • Two lateral trunks necessary for the installation of bearings and fix the fixing part of the control handle to them.

The assembly algorithm will not take much time. So that all the discs on such walk-behind shoes rotate evenly during movement, in their sidewalls you need to drill through holes for installing a steel rod with a diameter of 8-10 mm.

Now they are dressed on the axis, a rod is inserted into the side holes, after which a bearing, her tsapps and brackets are installed, which are clamped by nuts. The control handle is installed on the brackets and is also fixed with nuts.

Complex technical devices require special tools and materials, but in the end an indispensable assistant will appear when processing virgin lands on his land.

Homemade trailer

The trailer can be made in several ways and using various materials. As a rule, homemade structures are made of a metal frame and wood.

  • Make a drive consisting of a breath and a rotary building. Connect with the frame so that the hinge is inside the tubular case.
  • Make a frame according to pre.Drawn drawings from a pipe with a diameter of 60 mm. Lure with wood or metal sheet.
  • Using a whole metal axis, install automobile wheels on the design.
  • From wood to collect a driver’s seat.

The rear side of the trailer is made folding to facilitate loading and unloading. Metal amplifiers are welded on the sides. The trailer is painted and connected to the walk.Behind tractor.

How to make a home.Made motor.Cultivator, description and drawings

Install the engine from a moped, make a two.Stage power transmission, and install available bicycle as a call (so that the number of teeth is 41).

First of all modernized the frame of the cummer. First cut off the wheel mount. Instead, a slightly elongated new fork was attached, using electric welding. On the front of this fork, a pipe was welded, which is an additional amplifier and at the same time serves as a supporting element for an intermediate shaft and engine.

Since the cigns, as a result of changes, becomes self.Propelled, it is necessary to strengthen its standard wheel. To do this, a three.Beam knitting needle is welded on the rim and hub. It is cut out of a steel sheet, 2 mm thick. The wheel itself was modernized by welding to it twenty soil.Spaceds made from a steel corner of 20×20, a long 60 mm long. On the wheel hub, on the left side, they installed a bicycle star.

make, motor, cultivator, your

The installed engine from a moped was equipped with forced cooling. So that it is possible in the engine clutch cover made a hole with a diameter of 29 mm, which is located on the same axis with the nest of the lead gear of the crankshaft. This hole will be used to install a bolt-axis and a fan impeller.

Motopahar of the mill

The design of a fairly technological homemade motofrese. Only 15 is required for its manufacture. 20 parts need to be made in the workshop. All the others can be done at home using a drilling machine and electric welding apparatus. In addition, some details. Such as distance tubes are made on a drilling machine (if there are other machine equipment, the tube design can be simplified).

See also  How to cut tempered glass at home

DIY cultivator: assembly instructions

To create a cultivator, you can use a chainsaw, starter, corner grinder or washing machine.

From a chainsaw

Teru has long established itself as a way to make a cultivator from a friendship chainsaw with your own hands. The principle of creating is quite simple. As a result, the equipment comes out of small weight, compact and reliable, with a very productive engine. The speed is approximately 2.5 km/h, and the power is 4 liters. With., which is quite drawn to a decent one.Axic tractor.

So, the process of assembling a cultivator from a chainsaw does not differ especially from a general collection mechanism, but has its own nuances:

How to Make a DIY Air Filter | Ask This Old House

  • The main shaft is equipped with a collar type flange. In the future, this will allow you to attach bridge gearboxes without any problems.
  • Starks (usually from UAZ) and a two.Row chain are taken and installed on the future mechanism. Thanks to them, the distance from the gearbox to the ground becomes an order of magnitude larger. Tarm stars, unlike others, increase the distance to the ground by as much as 15 cm.

From the starter

Creating a similar cultivator will not be any complexity if the starter from any car is stored in the home arsenal. If there is such a necessity, then in the future the shaft is slightly shortened. It is also advisable to replace the front cover, having previously done a lot of small holes in it (up to 5 mm in diameter) to receive air from the attached fan. The prepared starter is combined into a design with milling. Then the almost finished device is installed on the most ordinary working platform of the cultivator and tested.

From corner grinders

A boat-sorting cultivator does not have high power, but nevertheless it copes well with the weeding of the site. Corner grinder in such a device acts as an electric drive. Everything else is taken from old non.Working cultivators.

Important! An ordinary corner grinder can make up to 600 revolutions per minute, therefore, when creating a cultivator, a pulley with a cellet stream is used to it, and not the detachment circles.

To the frame made from the old cultivator, it is necessary to weld the suspension of the corner grinder, and in order for the product to be connected to electricity, an ordinary extension cord is taken on the coil.

After the cultivator base is collected together, you can try the car. Cutters of such a assembled device should issue 300 revolutions per minute.

From the washing machine

Many owners have an old and unnecessary washing machine somewhere in the garage or in the barn, which is still able to work, but is no longer relevant. Based on its engine, it is possible to make a small electric cultivator. So the old technique will find life and still serve for the household. To make a similar cultivator, the following parts will be required, in addition to the electric motor from the machine: two.Core wire, gearbox, ordinary wheel (diameter. 1.5 m), metal corner (in length not more than 3 m), toggle swore, springs from the car as a quality knives, trigger button and drum with a piece of tin.

When everything is found, you can start the collection directly. And the first stage is welding work. They follow the preparation of knives. For each knife, it is necessary to observe its trajectory of movement, not intersecting from any other.

For the engine itself, two windings are needed (launch and working). The starting winding is used only when the tool is launched, but the working one must be connected to the network for the entire period of work.

In principle, on this all the key aspects of collecting a cultivator from the washing machine end. This data is enough to try to assemble the design yourself.

make, motor, cultivator, your

Do.It.Yourself motor cultivator: where to start and how to make

The main details of a home.Made motorbiker are a gearbox and engine. First of all, we make a frame of the future cultivator, drill holes for installing the main nodes, and make handles to control the unit of two curved pipes with a diameter of 32 mm. Between homemade handles, it is necessary to put a pipe that will be like a spacer that increases the strength of the structure. To one of the handles, we will subsequently install the start button.

For the manufacture of the shaft, I used an unnecessary scrap, welded a star from the camshaft of the VAZ engine, and the chain and both stars were scald with metal, making a cover.

See also  How to cut a pipe in a hard-to-reach place

I connected a three-phase engine according to the standard “triangle” circuit, place the condenser button on the handle to make it more convenient.

Ground.Bending motorbace groundsups

Our cultivator must somehow ride. Select the necessary wheels. Remember that small wheels will get stuck in the ground and interfere with work. Too large wheels by a home.Made motor.Cultivator will be hard to twist. The selected wheels are fixed to steel corners, which are placed on the gearbox crankcase. Attaching wheels to your home.Made mechanism is not all. Fasten the soil to the wheels. With the help of them, the motor.Cultivator will better bite into the ground.

Take car springs or just corners and cut off the hooks of the desired diameter from them. In order to get the maximum effect, set the angle of hooks by 120 °.

When you finish working with the connection of all parts, you can use the made motor.Cultivator with your own hands for several years. If you want the unit to just break the whole land into large pieces, you will need to go quickly with it. The lower passage speed grinds the ground into the smallest particles. It all depends on the speed of working with the cultivator. Before using it, lubricate the shaft of the mechanism with oil so that the homemade is served without breakdowns longer.

By the same principle, you can also take the engine from the washing machine for a homemade motorbace. Disassemble a baby bike and adapt to your unit of sprockets and a bicycle chain. As a result, you get such a home.Made electrical cultivator. True, if you decide to make this unit with your own hands, keep in mind that the wire will constantly get confused and interfere. Due to the fact that the power of the mechanism depends on the network and the cable-you will not go further than it will allow its length.

How to make a cultivator with your own hands with an electric drive?

Two electric motors are often taken as the basis of an electric cultivator, each of which should have a power of 1.5 kW. In the future, they are combined into one continuous system by means of pulleys and one belt. The main thing is that both the belt and the pulley have the same diameter.

The rear wheels of the unit should not be leading. When installing on the front axle of the rotor, they will become a support. If you install the wheels on the front axle, then the bridge will become more stable. Such a layout will help to use hinged inventory, which is necessarily useful on the farm.

It is best to buy a gearbox in ready.Made form. It will be optimal if you find a working element from an old cultivator or motorcycle. Any problems with its installation should not arise.

The frame can be assembled from any improvised materials. The most important thing is that the result of the work becomes as reliable as possible. As a rule, metal pipes and plates are used for the manufacture of the frame, which are connected by welding.

The assembly also requires the power cable. The minimum cord length should be 20 m. This will plug the ground in areas with an area of ​​up to 4 acres.

How to make a one.Legged chainsaw tractor

Most often, motor cultivators are created from chainsaws, since many owners of areas have similar devices. The manufacturing process begins with the manufacture of the aggregate frame. The created design should have the form of a cube. The engine is fixed at the upper corners.The fuel tank of the device is installed below on pre.Created mounts. The vertical racks of the foreground frame are designed to arrange intermediate shaft supports.

As a result, a homemade unoic tractor from a saw is obtained, the center of gravity of which is located above the wheels. Thanks to the simple structure of the design, you can repair the motor.Cultivator with your own hands.

Discuss the article on the forum

How to choose a gasoline chain saw

Otteral cars for the streets

How to choose a sprayer

make, motor, cultivator, your

How to choose a gazono-core robot

Electric test video

How to choose an electric chain saw

| Denial of responsibility | Contacts |RSS