DIY sprayer for a walk.Behind tractor

I came across such a site ”a sprayer for a walk.Behind tractor is a necessary thing, but buy a ready.Made expensive one, and I didn’t find options, besides this. And to make yourself is not very difficult like. Judging by the picture on the site, I think that the pump is simply attached to the walk.Behind tractor, which pumps water from the barrel into the bar. It turns out that you can buy a pump on a one.Axine tractor (like this ”), a barrel, make rods, connect with hoses, put it all on an adapter and forward.

Maybe one of the versed people will correct me, if not right, or advise that?

The pump you cited for example is not suitable t.To. Has too much productivity 12m/cube. An hour for such purposes is more suitable for such »post#941 performance 20 liters.Min. At good pressure and it is intended initially for sprayers

I thought that the flow of water can be limited by some kind of venture.

20 liters per minute? Where is such a consumption? There is a pump gor. About this “

What are you inventing a bicycle ? Everything has been done for a long time-the NSh-10 pump was connected to VOM and forward “

The pump in post #2 was originally designed as a pump for a sprayer and it was designed to work with aggressive liquids and also has its own lubricant and power consumption of 1l.With. And the NSh-10, as well as from the hydraulic power steering for hydraulics and is lubricated with working fluid-not likes to mention chemistry, and the hinged pump for the walk-behind tract is designed for a large rolled fluid and power from the engine, respectively.

I am out of what you can buy. On the Internet, from the right price and purpose, I found so far only this ”and at the walk-behind tractor 9-12 liters.With. There should be enough power to the pump.

make, sprayer, tractor, walk

Such a pump is useful for draining water. And for a sprayer, after all, you can probably put the valve and limit the supply of water to the desired about eoma?

On the spraying of the example you cited, a similar pump in post #2 is installed for example, and maybe it has the same protection from the exceeding pressure and there is no this on the motoblic, and the flow of the flow will only increase the load on the engine and belt and the pump resource and since it is supposed to be trained with weight about 300 kg will whether the engine capacities that are in the standard 6-7.5 l.With. And you can also contact the Tamarovsky factory with the question why there is such a pump and not any other and whether it is possible to purchase it separately

Thanks for the advice. I’ll try to contact the factory.

I watched a video with a home.Made sprayer. There for 300 l. Barrel NSh-32 pump is set. Probably this type of pump can be used.

And 2 more homemade sprayers on which they put a motorcycle.

And I found one more ”only he costs a lot

What are you fantasy here, it is not clear that the simplest solution is like a manual sprayer. 1 Put an air pump or as a mini compressor is also called from VOM or from the pulley, any not very powerful 2 from it through the hose to the container (container or metal or duralumin or plastic but with thick walls) 3 in the container make the bypass valve in the likeness As in a manual sprayer, only on a greater pressure so that you can automatically operate at an increased pressure of 4 in a container, put the fence pipe almost to the bottom, put on a fine, small mesh type of the filter on the tube, so that 5 sprayers from this tube with rods with spray 6 are clogged convenience can put ball valves as in the house on the water

Take an ordinary household compressor in the likes of those that paint a car, remove the electric motor, and instead of the removed electric motor, the drive from the walk.Behind tractor to the compressor, put the rods with sprayers and on the way.

Cheap and angry and most importantly quickly

Interesting tips. There are still good links, if any, to the compressor and pump, to look in in the pictures, and to account.

Take an ordinary household compressor in the likes of those that paint a car, remove the electric motor, and instead of the removed electric motor, the drive from the walk.Behind tractor to the compressor, put the rods with sprayers and on the way.

Cheap and angry and most importantly quickly

Not very angry not very deciduously: the usual household compressor is not to disperse decorating, since it is worth the money. But the car to create pressure in a barrel of 100 liters will download two days-and a barrel under a pressure of 3-5 bar per 100 liters and buying with a sealed neck-this is far from deciduous. Therefore, the capacity should be from a bucket to a plastic barrel without excessive sealing, and a direct pump with the possibility of reduction with increasing pressure, for the constancy of pressure on the nozzles.

Krokvik wrote: Interesting tips. There are still good links, if any, to the compressor and pump, to look in in the pictures, and to account.

I had less interesting but worthy of attention: the working pressure of the usual BCC in the region of 3-4 bar (I mean the pumps, which are with receivers)-the repairmen of such pumps have zgoreni, which are unprofitable for various reasons-to buy at a similar price And instead of the fan, install the pulleys. The rest of the props as in other cases.

Krokvik wrote: I thought that the flow of water can be limited to some kind of venture.

Why not put the tee on the hose going from the pump and from the tee hose back to the barrel. How to say excess production of this pump will go back to the barrel (cycle). And put a valve for adjustment of pressure on the pipe to the rods. So I think the walk.Block pump can be put and you do not need to be wise with all sorts of compressors there.

Mexanikus wrote: on the spraying of the example you cited, a similar pump is installed in the post #2 and maybe it has the same protection from the exceeding pressure and on the motoblock this is not, and the ceiling of the flow will only increase the load on the engine and belt and the pump resource and since it is assumed Another trailer weighing about 300 kg will whether the engine capacities that are in the standard 6-7.5 l.With. And you can also contact the Tamarovsky factory with the question why there is such a pump and not any other and whether it is possible to purchase it separately

See also  What you can make from an electric screwdriver battery

Why not put the tee on the hose going from the pump and from the tee hose back to the barrel. How to say excess production of this pump will go back to the barrel (cycle). And put a valve for adjustment of pressure on the pipe to the rods. So I think the walk.Block pump can be put and you do not need to be wise with all sorts of compressors there.

Double.Purpose sprayer

Just as it is not difficult to build a homemade sprayer, especially portable, so it is quite accessible to make your own car wash with your own hands from a sprayer. He will be very economical. Water consumption for complete washing of a car 10. 20 liters.

Home.Made foam.Generator from a sprayer

Do.It.Yourself peno generator turns out in this way:

  • Fill the tank with water and add the auto.Stepped.
  • In the hose that goes from the tank to the pistol. The sprayer, we cut out the hole with a diameter of 2 mm, for air intake, and its mixing with an water.
  • Install a foam tablet. Its role will be well played by a regular metal dishwashing mesh, tightly stuffed into the transition tube on which the gun is wound.

As a result of these manipulations, an excellent foam effect is obtained and, as a result, a clean car.

Double.Purpose sprayer

Just as it is not difficult to build a homemade sprayer, especially portable, so it is quite accessible to make your own car wash with your own hands from a sprayer. He will be very economical. Water consumption for complete washing of a car 10. 20 liters.

Home.Made foam.Generator from a sprayer

Do.It.Yourself peno generator turns out in this way:

  • Fill the tank with water and add the auto.Stepped.
  • In the hose that goes from the tank to the pistol. The sprayer, we cut out the hole with a diameter of 2 mm, for air intake, and its mixing with an water.
  • Install a foam tablet. Its role will be well played by a regular metal dishwashing mesh, tightly stuffed into the transition tube on which the gun is wound.

As a result of these manipulations, an excellent foam effect is obtained and, as a result, a clean car.

Improvement of the chassis

The first thing that the motoblock users think about is about how to make a cart with a seat to it. Using the technique in normal mode using levers, involves the application of great physical efforts. However, the use of the trailer reduces the resistance of the vehicle. This problem can be eliminated by expanding the wheelbase. This is done using extension cords that are attached to the semi.Shaft with pins or bolts. Having solved the problem with stability, the operator is faced with another issue: the unit is poorly controlled. Differential for a walk.Behind tractor helps to give him good maneuverability. This device is made by analogy with cars of passenger cars. Homemade unlocks for a walk.Behind tractor are made using ordinary household tools. Corner grinding, welding and sharpener.

The low weight of the walk.Behind tract is the cause of poorly grip of the wheels with the soil. The slippage is a frequent phenomenon when raising virgin lands, working on soil cheese or movement in the snow. To avoid slipping, weighting.

These devices are divided into such categories:

make, sprayer, tractor, walk

  • Wheel. Are discs that are attached to wheels or hubs. Disks are made monolithic of metal, concrete or hollow, filled with sand. The weight of the wheeled weighting agents can be 30-70 kg.
  • External. Made from any heavy material (steel, lead, concrete). Attached to the body using hooks or bolts. Some craftsmen weld the frame from the corner to the body. Sand bags, bricks, metal scrap and other heavy objects are laid in it.

Improve the cross.Scale of the walk.Behind tract can be installed by installing soil. The easiest way to make soil.Spaces is that you need to make a rim from a metal strip and weld the blades on it. The diameter of the rim should be larger than the wheel discs and less than that of the tires. The rim is planted with low tires. After the soil is installed, the wheel is pumped up.

You can improve the transmission by installing a home.Made variator on the engine. The system of belts and discs will smoothly change the speed of the unit, without jerking and vibration.

Description of the device

The main task of a garden sprayer is an effective spraying of fluids (chemicals, fertilizers, stimulants, etc. D.) on plants. The liquid applied in this way perfectly adheres to plantations and for a long time shows its protective properties. Spraying is a necessary measure to protect bushes and fruit trees from diseases and pests (caterpillars, aphids, ticks, etc.). In order for the processing process to pass correctly, it is worth using special equipment. A garden sprayer.

All devices of this purpose can be divided into groups according to the principle of operation (from elementary manual to self.Propelled). The following types are distinguished:

  • Manual sprayer, which is a plastic tank with a lid with an mounted pump pump. The pump is created the right pressure in the tank, then you can spray the liquid by pressing the lever that is located on the handle. Units of this type are produced with a tank volume from 0.5 to 2 liters. It is perfect for spraying seedlings and other non.Massive plantations.
  • Pompom sprayer is designed to spray a large number of plants. The volume of the tank is 3-12 liters. It needs to be worn on the shoulder on a special belt. There is also a pump on the lid, and a hose (1-1.5 meters) with a special handle, bar and nozzle is from the case. To date, pompom garden sprayers are one of the most popular. This is a great option for processing areas up to 30 acres.
  • Running manual sprayer. Here the pressure is pumped in the pump. The devices of this species are convenient in that they can be worn behind them, like a backpack. When processing plantations using this unit, you need to pump pressure with one hand, and keep the rod with a spray with the second, which is not very convenient and tiring quite tiring.
  • Sprayer Range Battery. This is an improved model of the previous. Its main advantage is that the pressure is formed through an electric drive from the battery. This mechanism significantly facilitates the process of plant processing and accelerates the process. Due to their effectiveness and productivity, electric garden sprayers are suitable for small private gardens and gardens, and for mini-host.
  • It is advisable to use a gasoline motor of the gasoline for work in large areas. The volume of fluid containers here varies in the range of 12-20 liters. Sprayers of this type are divided into two types: Ranzovs, which are worn behind; wheels, which can be freely moved around the garden and garden.
See also  How to charge a battery. How to correctly charge a car battery with a charger?

All the above units can easily be bought in markets or specialized stores, as well as order via the Internet. But you can do it yourself by making the device yourself from available materials. Perhaps this method will be the most true, t. To. Your own sprayer for the garden and the garden can easily be adjusted to your needs and not worry about the repair in case of any breakdown.

Homemade DIY pull-behind boom sprayer

Dvovoznate breeders for mini.Tractors

A mini.Breeder for a mini.Tractor is another useful device, with which you can easily fertilize the crop with organic fertilizers. Due to this, sowing is environmentally friendly, and the consumer will be able to save, since chemical fertilizers are an order of magnitude higher.

Build your own DIY 55 Gallon No Drip Regulated Yard and Garden Sprayer on the cheap!

All models of manifaces to the mini.Tractor have the design of the case of the same type, the difference is only in the capacity of the hopper, the number of disks and types of mounts. The self.Supporting structure has a structure in which dosing holes and scattering discs are located in such a way that the fertilizer process is quickly and efficiently and highly possible, and sowing is accurate and uniform.

This design is designed for superficial scattering of organic fertilizers, such as compost, pus, and others. It is possible to mount an additional prefix in the place of a worm adapter, which will allow the use of such a natural fertilizer as chicken litter or limestone.

Varieties of sprayers

Since all homemade spraying devices are made by the same patterns as factory, it will not be superfluous to familiarize themselves with the modifications available on the market.

The most reliable option is a manual pompom sprayer. It will fit quite for a small summer cottage or service of a adjacent flower garden. It works for a manual pump, which is pumped into the tank air. The latter, creating working pressure, pushes the liquid into the hose from the container, at the end of which there is a special nozzle. Sprayer. It is thanks to this part that the water is converted into a cloud of the smallest drops. The process stops after the pressure is reduced in the tank, and resumes after pumping air.

Hydraulic sprayer is usually cheaper. In general, it functions according to the same principle as the previously described pump, but here it is necessary to escalate air into the container continuously. It is difficult to process large areas with such a device.

Motoooletors are supplied with an internal combustion engine operating on gasoline. This option will cost the consumer a solid amount, and for a standard summer cottage he is too powerful.

Sprayer for a walk.Behind tractor, buy or assemble yourself?

I came across such a site ”a sprayer for a walk.Behind tractor is a necessary thing, but buy a ready.Made expensive one, and I didn’t find options, besides this. And to make yourself is not very difficult like. Judging by the picture on the site, I think that the pump is simply attached to the walk.Behind tractor, which pumps water from the barrel into the bar. It turns out that you can buy a pump on a one.Axine tractor (like this ”), a barrel, make rods, connect with hoses, put it all on an adapter and forward.

Maybe one of the versed people will correct me, if not right, or advise that?

The pump you cited for example is not suitable t.To. Has too much productivity 12m/cube. An hour for such purposes is more suitable for such »post#941 performance 20 liters.Min. At good pressure and it is intended initially for sprayers

I thought that the flow of water can be limited by some kind of venture.

20 liters per minute? Where is such a consumption? There is a pump gor. About this “

What are you inventing a bicycle ? Everything has been done for a long time-the NSh-10 pump was connected to VOM and forward “

The pump in post #2 was originally designed as a pump for a sprayer and it was designed to work with aggressive liquids and also has its own lubricant and power consumption of 1l.With. And the NSh-10, as well as from the hydraulic power steering for hydraulics and is lubricated with working fluid-not likes to mention chemistry, and the hinged pump for the walk-behind tract is designed for a large rolled fluid and power from the engine, respectively.

I am out of what you can buy. On the Internet, from the right price and purpose, I found so far only this ”and at the walk-behind tractor 9-12 liters.With. There should be enough power to the pump.

Such a pump is useful for draining water. And for a sprayer, after all, you can probably put the valve and limit the supply of water to the desired about eoma?

On the spraying of the example you cited, a similar pump in post #2 is installed for example, and maybe it has the same protection from the exceeding pressure and there is no this on the motoblic, and the flow of the flow will only increase the load on the engine and belt and the pump resource and since it is supposed to be trained with weight about 300 kg will whether the engine capacities that are in the standard 6-7.5 l.With. And you can also contact the Tamarovsky factory with the question why there is such a pump and not any other and whether it is possible to purchase it separately

Thanks for the advice. I’ll try to contact the factory.

I watched a video with a home.Made sprayer. There for 300 l. Barrel NSh-32 pump is set. Probably this type of pump can be used.

And 2 more homemade sprayers on which they put a motorcycle.

See also  How to make a snow shovel on a single axle tractor

And I found one more ”only he costs a lot

What are you fantasy here, it is not clear that the simplest solution is like a manual sprayer. 1 Put an air pump or as a mini compressor is also called from VOM or from the pulley, any not very powerful 2 from it through the hose to the container (container or metal or duralumin or plastic but with thick walls) 3 in the container make the bypass valve in the likeness As in a manual sprayer, only on a greater pressure so that you can automatically operate at an increased pressure of 4 in a container, put the fence pipe almost to the bottom, put on a fine, small mesh type of the filter on the tube, so that 5 sprayers from this tube with rods with spray 6 are clogged convenience can put ball valves as in the house on the water

Take an ordinary household compressor in the likes of those that paint a car, remove the electric motor, and instead of the removed electric motor, the drive from the walk.Behind tractor to the compressor, put the rods with sprayers and on the way.

Cheap and angry and most importantly quickly

Interesting tips. There are still good links, if any, to the compressor and pump, to look in in the pictures, and to account.

Take an ordinary household compressor in the likes of those that paint a car, remove the electric motor, and instead of the removed electric motor, the drive from the walk.Behind tractor to the compressor, put the rods with sprayers and on the way.

Cheap and angry and most importantly quickly

Not very angry not very deciduously: the usual household compressor is not to disperse decorating, since it is worth the money. But the car to create pressure in a barrel of 100 liters will download two days-and a barrel under a pressure of 3-5 bar per 100 liters and buying with a sealed neck-this is far from deciduous. Therefore, the capacity should be from a bucket to a plastic barrel without excessive sealing, and a direct pump with the possibility of reduction with increasing pressure, for the constancy of pressure on the nozzles.

Krokvik wrote: Interesting tips. There are still good links, if any, to the compressor and pump, to look in in the pictures, and to account.

I had less interesting but worthy of attention: the working pressure of the usual BCC in the region of 3-4 bar (I mean the pumps, which are with receivers)-the repairmen of such pumps have zgoreni, which are unprofitable for various reasons-to buy at a similar price And instead of the fan, install the pulleys. The rest of the props as in other cases.

Krokvik wrote: I thought that the flow of water can be limited to some kind of venture.

Why not put the tee on the hose going from the pump and from the tee hose back to the barrel. How to say excess production of this pump will go back to the barrel (cycle). And put a valve for adjustment of pressure on the pipe to the rods. So I think the walk.Block pump can be put and you do not need to be wise with all sorts of compressors there.

Mexanikus wrote: on the spraying of the example you cited, a similar pump is installed in the post #2 and maybe it has the same protection from the exceeding pressure and on the motoblock this is not, and the ceiling of the flow will only increase the load on the engine and belt and the pump resource and since it is assumed Another trailer weighing about 300 kg will whether the engine capacities that are in the standard 6-7.5 l.With. And you can also contact the Tamarovsky factory with the question why there is such a pump and not any other and whether it is possible to purchase it separately

Why not put the tee on the hose going from the pump and from the tee hose back to the barrel. How to say excess production of this pump will go back to the barrel (cycle). And put a valve for adjustment of pressure on the pipe to the rods. So I think the walk.Block pump can be put and you do not need to be wise with all sorts of compressors there.

Production of a field sprayer

Homemade sprayer for a walk.Behind tractor is necessary in cases where the area of ​​the processed crops exceeds 20 acres. It is very difficult to manually do such work, it can take all day. The mechanization of this process will save a lot of time and effort.

For the manufacture of a sprayer, you will need:

  • Welding machine;
  • Corner grinder;
  • Level;
  • Electric drill;
  • Soldering iron for polypropylene pipes;
  • Profile or round water pipes;
  • Plastic or steel barrel with a capacity of 80-100 l;
  • Wide pneumatic wheels;
  • Plastic pipes;
  • Rubber hose;
  • Nozzles or nipples from wheel cameras.

The assembly of a home.Made sprayer is carried out in the following sequence:

  • Making a frame. Its dimensions are adjusted to the size of the container. The chassis is attached to the frame. For good patency, at least 4 wheels are needed. For lack of wheels, wide skids of aluminum are made.
  • The capacity is installed and fixed on the frame. For this, spacers and screeds are used. Holes are made in the tank for supplying high pressure hoses. The neck of the tank is sealed.
  • The bracket for the pump is made. The model is selected that works from the power shaft (belt transmission) or from electricity (motor block generator).
  • The watering system is assembled. A strong holder from steel profiles is made. With the help of clamps or plastic screeds, plastic pipes join it. The valve is installed for exhausting excess pressure and nozzles.
  • All parts are connected together, the quality of the mounts, the tightness of the joints is checked. The tank is filled with water, the unit is tested in various modes, final adjustment and configuration is performed.

Do.It.Yourself sprayer will fully justify the invested efforts already in the first season. Thanks to this device, spraying and watering the garden will be carried out quickly and efficiently.

| Denial of responsibility | Contacts |RSS