Homemade all.Terrain vehicle from a walk.Behind tractor, description, photo, video

In the article, we consider how a home.Made all.Terrain vehicle is made from a walk.Behind tractor. The functionality of the all.Terrain vehicle (as can be seen from the video) coincides with the characteristics of the tractor from the walk.Behind tractor, only you can get on it anywhere.

Improves by all.Terrain vehicle. Various means of transportation. These are tractors, and snowmobiles, and SUVs, and tanks. To date, the coating of most of the roads flying through rural areas do not have asphalt coating. That is why those who faced such a problem are so interested in a home.Made all.Terrain vehicle from a walk.Behind tractor. Having a single.Axle tractor, you can independently make a wheel all.Terrain vehicle that would have high cross.Country ability, both in water barriers and in the snow.

We collect an all.Terrain vehicle, the power unit of which will be a single tractor. What is the main idea: we remove the steering wheel and wheels from the walk.Behind tractor, insert it into the frame, and the crankgoes go to the bridges. One of the key requirements is to prevent a radical alteration of the walk.Behind tract. In other words, I installed one.Time tractor in a frame. It turned out a floating all.Terrain vehicle. He took off the frame and collected the details. He returned the same.Based tractor back. Here’s the result of this idea.

#128293;Mounting/Streach Tires Using Brake Cleaner#128293;

Dimensions and sizes of a home.Made all.Terrain vehicle

The overall dimensions of the all.Terrain vehicle: length 3100 mm, width 1760 mm, height 1820 mm. Carrying capacity 200 kg. The maximum developed speed is from 8 to 12 km/h. Message of equipment 530 kg. A single.Level frame is made of a profile pipe (60x40x2). As a power unit, the Unoa tractor of the Neva MB-3 brand is used, with a 7 liter engine.With.

Also allows you to switch three front.Line gears, one back. Installed bridges M-412. Closed discs are used, with bolted clamps. Tires from KAMAZ VISTRICKS are installed, chamber option. WAZ rotary fist with SHRUS M-2141. The steering from the column is used-VAZ-1111 “Oka”. A transmission, mechanical brake system has been installed.

For the manufacture of an all-terrain vehicle, the same-based tractor of the MB-3 Neva brand was purchased. He was selected due to a three.Speed checkpoint, which has a very quiet first gear. Not a particularly powerful engine is also installed.

Another reason for choosing a walk.Behind tractor is the ability to turn off one of the wheels from the transmission. As a result, we get on a home.Made all.Terrain vehicle the opportunity to turn off one of the bridges.

The design of the all.Terrain vehicle is very simple. All parts of the control of the walk.Behind tractor are on the back half. This allows you to use the one.Axle tractor without remaking. As a result, the motor block parts of the management were used, which were entirely installed on the frame of the all.Terrain vehicle. The exception is the cable and the clutch control pedal. His cable, along with the lever, is removed from the walk.Behind tractor, and the clutch cable from the all.Terrain vehicle is connected, which is associated with the pedal.

The principle of clutch remains the same as on the walk.Behind tractor: the all.Terrain vehicle goes after pressing the pedal, and stops when it is released. The engine power is enough for movement in third gear to enter a steep rise.

In the first gear, at a minimum speed, the maximum thrust is reached, so that the all.Terrain vehicle walking at idle, overcomes complex obstacles, without straining the engine. To increase the maximum speed of the all.Terrain vehicle, you need to increase the diameter of the leading pulley by 50%, which do not damage the traction capabilities of the walk.Behind tractor.

Motoboblock swamp carpet. Remake options, video

Many owners of motoblocks, having decided to make an all.Terrain vehicle out of it, cannot decide in any way what they eventually want to get: a snowmobile or a swamp carrier from a motor unit? Meanwhile, their doubts are simply dispersed: both home.Made vehicles are made according to one scheme, it’s just two variations of the same mechanism. In other words, on a snowmobile without any problems you can travel through mud, and in the swamp. In the snow.

Motor vehicle based on a walk.Behind tractor: where to start?

The alteration of the walk.Behind trawling must begin to start from the preparation of a detailed diagram of alteration and manufacture of drawings. Only having a clear idea of ​​what and how you want to redo, you can start converting the one.Axle tractor.

See also  How to make a guide bar for a circular saw

There are two fundamental requirements for the swamp, converted from the walk.Behind tractor from the walk.Behind tractor, from which the second is actually a logical continuation of the first:

  • To move along the marshy area, the mechanism should exert minimal pressure on the soil;
  • To provide minimal pressure on the soil, the mechanism needs wheels, several times wider than ordinary.

At first glance, everything is extremely simple. But in order to solve these two problems and turn your uno.Based tractor into a swamp, you need to start from the other end.

Step.By.Step transformation of a motor block into a swamp carrier

If you decide to make a swamp from your two.Wheeled assistant, then the first thing to do is turn it into a mini.Tractor. But not then to plow, sow and remove the crop on it, but to provide it with a hard frame and put one.Time tractor from 2 to 4 wheels.

The easiest way is to purchase a special kit for transforming a walk.Behind tractor, which includes all the nodes and systems necessary for the subsequent alteration in the swamp:

  • Frame with mounts installed on it for installation of the engine;
  • Driver’s seat;
  • Footboard with pedals;
  • The front beam, on which the wheel hubs and brake discs are already mounted;
  • Opens of turning on and off the semi.Shaft locking system.

After remaking into a mini.Tractor, until a complete transformation, one step will remain in the swamp car. Install the right wheels on a mini.Tractor. Often, such a home.Made mechanism is made on the air frame, for which the native wheels of the walk.Behind tractor are replaced with wheels with low.Pressure chambers taken from trucks.

Alternative alteration options

There is another, simpler, but no less effective way to convert the chassis. Everyone knows that with the same power power in vehicles on a tracked go, cross.Country ability is much higher than that of their wheel analogues. It is this fact that the alteration is based on.

For converting into the swamp, you need to make caterpillars or get old, for example, from the Buran snowmobile. These caterpillars are adjusted to the diameter of the wheelbarp wheels, then air is produced from the cylinders so that you can easily be worn on the lowered wheels. Wearing the caterpillars, the cylinders are pumped again, and, increasing in size, they are tightly “imprinted” into caterpillar on the wheels.

“Shod” into such impromptu caterpillars, the swamp, when moving, exerts 2-3 times less pressure on the surface than when driving on wheels. In addition, such “shoes” by an order of magnitude improves the adhesion of the mechanism with the soil, much increasing its cross.Country ability.

In addition, this transformation method has one more advantage: if necessary, it is very quickly possible to carry out its reverse alteration in a mini.Tractor. For a walk.Behind tractor, whose main purpose is the cultivation of land, such an opportunity has far from the last meaning.

Dimensions and sizes of a home.Made all.Terrain vehicle

The overall dimensions of the all.Terrain vehicle: length 3100 mm, width 1760 mm, height 1820 mm. Carrying capacity 200 kg. The maximum developed speed is from 8 to 12 km/h. Message of equipment 530 kg. A single.Level frame is made of a profile pipe (60x40x2). As a power unit, the Unoa tractor of the Neva MB-3 brand is used, with a 7 liter engine.With.

Also allows you to switch three front.Line gears, one back. Installed bridges M-412. Closed discs are used, with bolted clamps. Tires from KAMAZ VISTRICKS are installed, chamber option. WAZ rotary fist with SHRUS M-2141. The steering from the column is used-VAZ-1111 “Oka”. A transmission, mechanical brake system has been installed.

For the manufacture of an all-terrain vehicle, the same-based tractor of the MB-3 Neva brand was purchased. He was selected due to a three.Speed checkpoint, which has a very quiet first gear. Not a particularly powerful engine is also installed.

Another reason for choosing a walk.Behind tractor is the ability to turn off one of the wheels from the transmission. As a result, we get on a home.Made all.Terrain vehicle the opportunity to turn off one of the bridges.

The design of the all.Terrain vehicle is very simple. All parts of the control of the walk.Behind tractor are on the back half. This allows you to use the one.Axle tractor without remaking. As a result, the motor block parts of the management were used, which were entirely installed on the frame of the all.Terrain vehicle. The exception is the cable and the clutch control pedal. His cable, along with the lever, is removed from the walk.Behind tractor, and the clutch cable from the all.Terrain vehicle is connected, which is associated with the pedal.

The principle of clutch remains the same as on the walk.Behind tractor: the all.Terrain vehicle goes after pressing the pedal, and stops when it is released. The engine power is enough for movement in third gear to enter a steep rise.

See also  Where should the corner grinder spin. How to change rotation on a corner grinder

In the first gear, at a minimum speed, the maximum thrust is reached, so that the all.Terrain vehicle walking at idle, overcomes complex obstacles, without straining the engine. To increase the maximum speed of the all.Terrain vehicle, you need to increase the diameter of the leading pulley by 50%, which do not damage the traction capabilities of the walk.Behind tractor.

How to make a homemade all.Terrain vehicle from a walk.Behind tractor

Improves by all.Terrain vehicle. Various means of transportation. These are tractors, and snowmobiles, and SUVs, and tanks. To date, the coating of most of the roads flying through rural areas do not have asphalt coating. That is why those who faced such a problem are so interested in a home.Made all.Terrain vehicle from a walk.Behind tractor. Having a single.Axle tractor, you can independently make a wheel all.Terrain vehicle that would have high cross.Country ability, both in water barriers and in the snow.

We collect an all.Terrain vehicle, the power unit of which will be a single tractor. What is the main idea: we remove the steering wheel and wheels from the walk.Behind tractor, insert it into the frame, and the crankgoes go to the bridges. One of the key requirements is to prevent a radical alteration of the walk.Behind tract. In other words, I installed one.Time tractor in a frame. It turned out a floating all.Terrain vehicle. He took off the frame and collected the details. He returned the same.Based tractor back. Here’s the result of this idea.

Learning to create an ATV out of a walk.Behind tractor

It is curious whether the designers of the motor blocks could imagine what the craftsmen will turn into their brainchilds? Unlikely! Over, the masters are not going to dwell on what has been achieved, and the ATV created on the basis of the walk.Behind tractor is vivid evidence.

It differs from the standard motorcycle by the presence of four wheels, allowing you to easily drive through the most mountainous areas. ATV is also known for relative safety, because in case of entering the hole on the road, flying out of a two.Wheeled motorcycle is much easier than four.Wheeled.

The detailed stages of transformation

  • First you should dilute the wheels using special rates that are pulled out on a lathe or purchased in the store;
  • Then you need to take care of creating a frame. These details often “borrow” at a bicycle or motorcycle, but the possibility of welding them from classic water pipes is not ruled out;
  • Now you should attach this very frame to the walk.Behind tractor for a rotary hinge using two pins;
  • After you need to deal with the wheels. Naturally, car discs for rubber (with low profile) are considered as the best option). They differ in a fairly wide bed and an excellent rubber chamber that will perfectly fit them;
  • Cameras should be selected from trucks, then in the practicality and endurance of the device you will not have to doubt.

Thanks to this simple method of alteration, you can get an excellent ATV that does not need a rolled road and does not fear steep turns and slopes.

In total, it can be noted that in the presence of additional tools, materials, drawings, video tutorials and other things, the same.Based tractor can be completely re.Qualified and “inhale the new life”!

How to make an all.Terrain vehicle from a walk.Behind tractor?

The all.Terrain vehicle with the engine from the walk.Behind tractor is made, following a certain scheme:

  • The base of the device is created. Ready.Made frames are most likely. You can take them from the old equipment of the Urals and Izh. Such frames are durable and maneuverable;
  • Rear bridge. Includes the rear and front pendants, which are assembled from the rack, mowing and steering sleeve;
  • The wheelbase of the unit. You can use the old spare wheel from trucks. The same tractor on low.Pressure chambers is legged in control and rather maneuverable;
  • The team design is established to perform the all.Terrain vehicle of its functions;
  • If the mounting of the motor system is completed, the transmission, exhaust elements and brakes are installed. The latter can be taken from the old car or motorcycle.

Do.It.Yourself low.Pressure wheels: modification of self.Landing from light agricultural machinery

All.Terrain vehicle from a motor block with low.Pressure wheels, as well as a classic pneumatic machine from a walk.Behind tractor is a universal solution for the most complex areas that an ordinary SUV may not master. Most often these are swampy places, sand dunes, roads with rocky coating.

Low.Pressure wheels are expensive, commensurate with the price of the rest of the karakat or swamp rowing. Therefore, we dwell on how to make home.Made motor vehicle. A pneumatic vehicle, an ATV or a swamp carpet on a pneumatic machine.

make, terrain, vehicle, walk, tractor, wheels

  • We find the basis. Ready.Made tires from cargo or aviation equipment. The latter is much easier and more durable. Due to the uniform thickness with it, it will be easier to work. But tires from zilov or gas are also worthy of attention;
  • We remove the wire cord around the entire perimeter of the workpiece;
  • We undermine and dismantle the tread pattern of rubber. Manually this is quite time-consuming, because of which we need a winch and a sharp knife;
See also  How to cut or thoroughs with a circular. Cut at home

TOP TRACTOR TIRE TIPS MISTAKES WHEEL SPACER INSTALL #128668;

  • After processing the tire, we proceed to the formation of a new protective pattern. It should be remembered that its character directly depends on the type of soil along which it will ride. For example, a deep tread is suitable for the swamp carrier, for clay soils. A pattern that will not prevent their independent cleaning. Narrow grooves will be viable in the sand for the pneumatic passage. The application of a new drawing is performed by hand with a special well.Sharpened knife. After that, we proceed to the assembly of the disk;
  • Collect the spare tire;
  • We pump the cameras. So that the tires are tightly fixed to the disk, a reinforced transport canvas is used.

Similar recommendations are a progressive solution for any home.Made machines from motor cultivators. Karakat, ATV, swamp carrier and even snowmobile.

We examined the most popular home.Made doctors from a walk.Behind tractor. But on this the ingenuity of the craftsmen does not end with respect to this agricultural machine. Residents of the northern regions have long appreciated the advantages of aerosaes, motorcycle, snowmobiles. And a mini.Tractor or a motorbike engine has become a permanent household satellite.

Simple homemade all.Terrain vehicle from a walk.Behind tractor

I made myself a very simple all.Terrain vehicle from a walk.Behind tractor, now I can drive where Niva and UAZ are stuck.

The easiest all.Terrain vehicle can be made from a walk.Behind tractor. The patency of such a technique is simply awesome, will pass where the SUV will get stuck. Indeed, compared to the car, such a single-based tractor-relief weighs many times less, and high pressure wheels are provided by high cross-country ability.

The peculiarity of the low pressure wheels lies in the large volume of air chambers, which creates low pressure and increases the area of ​​the support to the soil surface.

Mini all.Terrain vehicle is a home.Made, shown in these photos, I think nothing is difficult in this design.

It took a minimum of alterations here. The adapter, which consists of a frame of a metal corner made, attached a trolley to the walk.Behind tractor. The frame is installed on the car and the axis with a pair of wheels. The rear axis is installed on the hull bearings.

A little about wheels. For their manufacture, you needed wheels and cameras from the UAZ car. The cameras are fixed on the disks using belts.

Reducing gearbox remained unchanged. Some say that with such a load, it will not be enough for a long time, but so far it works without complaints.

In fact, the whole all.Terrain vehicle consists of: walk.Behind tractor, carts, armchairs and four low.Pressure wheels.

make, terrain, vehicle, walk, tractor, wheels

I want to note that after replacing the standard wheels of a walk.Behind engineer, with larger diameter wheels, the speed of the all.Terrain vehicle increased significantly.

Enmail, one-time tractor is a universal technique for the village. With his help, you can go fishing, mushrooms, berries, bring shocks to the forest. Когда дороги засыпает снегом, так что даже на Niva не проедешь, на вездеходе можно добраться куда угодно.

How to make low.Pressure wheels with your own hands?

Regardless of the type of manufactured technique for movement on moist and unsteady soils, soil.Spaceds are required to provide high adhesion. Low pressure wheels are most suitable. The same.Based tractor on the air wheel has a minimum of effect on the soil.

On the rear bridge, homemade special wheels are used, which can be installed on the swamp, motorized carrier (AURSANI), snowmobile or motorcycle engineer from the walk.Behind tractor. You can purchase ready-made elements or buy details in separateness (tires, cameras, disks).

  • Ordinary wheels and mounting plates are welded with metal tubes. So large cameras are created with improved fixation;
  • The camera is put on the finished extended disc. It can be purchased or used from trucks;
  • An air valve is inserted into the disk hole;
  • Pump up the wheel with air;
  • Ready tires are installed on the pneumatic vehicle from the walk.Behind tractor.

The perpetability of a conventional wheel increases with an additional tread. To fix the cameras, chains, conveyor tape, home.Made tracks are used.

To make all.Terrain vehicles/karakata on the air frame, you need to prepare the necessary materials and tools in advance. The described schemes of action and video instructions will help to deal with the process.

| Denial of responsibility | Contacts |RSS