How to install a trimmer head on a trimmer for grass

Naturally, during operation, the owners of the trimmers are faced with certain malfunctions of mowing heads. Over, they are most often associated with certain difficulties in pulling (lengthening) of the cutting cord from the coil. The most common causes of the lack of fishing line is its “bite” between the turns or sticking.

If the string is not served

In this case, the cause of the defect is incorrect winding of the cutting cord. A trimmer fishing line can be wound with insufficient tension, which helps to cross the turns together and confuse the string. When the coil rotates, the cutting cord under the influence of the emerging centrifugal force is delayed, which in turn leads to the clamping of the free end of the fishing line between the turns. To eliminate this malfunction, you need to dismantle the coil, disassemble it and rewind the string so that the turns lie down in even rows, pressing tightly against each other.

If the string sticks together

Squeezing the turns of the fishing line directly in the mowing head can be caused:

If, nevertheless, the user could not avoid sticking the fishing line, then to repair the trimmer coil for the grass, you need to remove and replace the existing cord with a better.

If there is too much string consumption

When using semi-automatic mowing heads, the user can detect the accelerated consumption of the cutting cord due to its spontaneous lengthening. As a rule, this happens due to the weakening of the spring installed inside the coil. You can eliminate the malfunction by putting several goals under the spring.

Materials:

From point of view. Hacksaw canvases should not be completely red.Hot.

CUTTING /TRIMMING THICK STURDY GRASSES NYLON LINE TRIMMER HEAD REVIEW

Everything that is needed for the manufacture of the nozzle

First you need to make the base of the nozzle. For this, from a metal plate

Cut the square with a side of 100 mm. You need to mark it in such a way that there is a hole exactly in the center (at the intersection of the diagonals). To do this, from the center of the selected opening perpendicular to the short side of the plate, we measure a distance of 50 mm and plan the trimming lines.

Cut the excess and get a square of 100 mm x 100 mm. Now it is necessary to twist the corners a little and drill the central hole for the shaft of a trimmer for the grass.

Read how to install mods on minecraft ps3

Twist the corners and drill the central hole for the shaft of a trimmer for grass

Cut the canvases for metal, measuring from each end 8 cm. We get 4 blanks with finished holes.

The end of the screw must be blown up so that the nut does not fly.

head, trimmer, grass, remove, coil

When working with a trimmer, it is important not to forget about safety precautions using any nozzles, and especially homemade. We offer to familiarize yourself with dry flowers: names and photos, descriptions of species and varieties

We offer to familiarize yourself with dry flowers: names and photos, descriptions of species and varieties

Change of vein on trimmer

If, with a light blow, the trimmer coil button for grass on the ground is not lengthened for a trimmer, then the prerequisites of this happen subsequent.

Option 1. It came out snacking, t.E. Squeezing the cord between the turns. This non.Bond usually occurs if the user wound a fishing line for a trimmer to the coil unevenly, with a crossbreed of turns, or wound it with the missing tension. In the latter case, when the mowing head is rotated at huge revolutions under the influence of centrifugal force, the cord begins to drag on, under the influence of which you intervaling fishing. To eliminate the task, you will have to disassemble the coil on the trimmer and rewind the cord correctly, in other words, even coils with good tension.

Option 2.7. Very short ends protrude from the head. A fishing line for a trimmer may not exit when hitting the ground, if its ends sticking out of the head are insufficient (short). The centrifugal force is not enough for the fishing line for the trimmer to stretch. Therefore, it is required to suspend the unit (drown out the engine as it is also called disconnecting an ethletric trimmer for grass from the network) and pull the fishing line for a trimmer manually, after pressing the button.

Option 3. A fishing line for a trimmer was soldered by a snot of a spitter head. This leads to the coil stops and does not even spin when the button is pressed. In the main thing, this happens for several reasons: the bad quality of the cord, overheating of the coil during prolonged operation of the unit, a string of fishing line on solid items.

  • At the beginning of the cord of the advantage of manufacturers, you will like more of low.Quality and fusible materials that do not hold mechanical and temperature loads. Therefore, preference should be given to “branded” fishing.
  • If you still got a fishing line for a trimmer of an unknown property, and it is often soldered at one time of work, that is, an option to follow the example of certain users, which, after refueling the cord, moisten it or silicone grease (from a spray can), or mineral oil). This procedure greatly reduces the possibility of soldering a fishing line with each other.
  • Also, a fishing line for a trimmer can sleep if at one time the mowing she hit a hard object (stone, fence, dry branch, etc.D.). At the end of this, it is a little stretched and draws back into the head with a high speed. The cord is heated from friction, and its turns are stuck together. The only thing that is done to eliminate this malfunction is to open a trimmer coil for grass and rewind a fishing line for a trimmer.

A mowing string head is one of the types of executive mechanism of a garden trimmer for grass. It is intended for mowing grass and constructively represents a special coil (bobin) from which a cutting cord (string, fishing line for a trimmer) sticks out in different directions). The string is a consumable material that is subject to replacement during operation. Based on the constructive and operational features of the trimmer for grass, manufacturers equip their products with a wide variety of types of heads-from simple hand coils to complex automatic bones. The more difficult the device of this mechanism, the more likely its breakdown. What to do if the coil does not spin, the string is not served or broken, as well as with other malfunctions. In the material further.

head, trimmer, grass, remove, coil

Self.Manufacture of bobbin

Quite often, a trimmer for grass is operated in the distance from places where you can purchase spare parts for a spitt with its breakdown. In this case, instead of a broken mechanism, you can install a simple coil made in design made by yourself. To do this, you need a sheet of plywood (textolite, metal, etc.), eyes, screws or screws. The process includes several stages.

  • A disk is cut out of the plywood sheet, which corresponds to the failed spool with a diameter.
  • A hole is drilled in the center of the disk, which matches the diameter with a shaft of a trimmer for grass.
  • Small eyes are attached to the opposite sides of the disk, which will serve to refuel the fishing line.
  • Through the eyes, pass the fishing line for the trimmer and fix it with ordinary screws or screws. The coil is ready for work.
  • Clutching the made bobbin between the two washers, it is attached to the shaft of the trimmer for the grass with a nut.

To replace the fishing line on a home.Made bobin, you will have to release fixing screws, insert a new section of the string and tighten the fasteners again. It is not necessary to remove the coil from the shaft of the trimmer for grass, however, it is necessary to exclude the possibility of spontaneous launch of the motor.

So, above was step.By.Step with the pictures described methods of repairing the string head. As you can see, the process is not complicated. And most of the breakdowns are directly related to the inaccurate refueling of the string and its unsatisfactory quality. You can clearly see all the stages of the process on the video.

Change of vein on trimmer

If, with a light blow, the trimmer coil button for grass on the ground is not lengthened for a trimmer, then the prerequisites of this happen subsequent.

Option 1. It came out snacking, t.E. Squeezing the cord between the turns. This non.Bond usually occurs if the user wound a fishing line for a trimmer to the coil unevenly, with a crossbreed of turns, or wound it with the missing tension. In the latter case, when the mowing head is rotated at huge revolutions under the influence of centrifugal force, the cord begins to drag on, under the influence of which you intervaling fishing. To eliminate the task, you will have to disassemble the coil on the trimmer and rewind the cord correctly, in other words, even coils with good tension.

Option 2.7. Very short ends protrude from the head. A fishing line for a trimmer may not exit when hitting the ground, if its ends sticking out of the head are insufficient (short). The centrifugal force is not enough for the fishing line for the trimmer to stretch. Therefore, it is required to suspend the unit (drown out the engine as it is also called disconnecting an ethletric trimmer for grass from the network) and pull the fishing line for a trimmer manually, after pressing the button.

Option 3. A fishing line for a trimmer was soldered by a snot of a spitter head. This leads to the coil stops and does not even spin when the button is pressed. In the main thing, this happens for several reasons: the bad quality of the cord, overheating of the coil during prolonged operation of the unit, a string of fishing line on solid items.

  • At the beginning of the cord of the advantage of manufacturers, you will like more of low.Quality and fusible materials that do not hold mechanical and temperature loads. Therefore, preference should be given to “branded” fishing.
  • If you still got a fishing line for a trimmer of an unknown property, and it is often soldered at one time of work, that is, an option to follow the example of certain users, which, after refueling the cord, moisten it or silicone grease (from a spray can), or mineral oil). This procedure greatly reduces the possibility of soldering a fishing line with each other.
  • Also, a fishing line for a trimmer can sleep if at one time the mowing she hit a hard object (stone, fence, dry branch, etc.D.). At the end of this, it is a little stretched and draws back into the head with a high speed. The cord is heated from friction, and its turns are stuck together. The only thing that is done to eliminate this malfunction is to open a trimmer coil for grass and rewind a fishing line for a trimmer.

A mowing string head is one of the types of executive mechanism of a garden trimmer for grass. It is intended for mowing grass and constructively represents a special coil (bobin) from which a cutting cord (string, fishing line for a trimmer) sticks out in different directions). The string is a consumable material that is subject to replacement during operation. Based on the constructive and operational features of the trimmer for grass, manufacturers equip their products with a wide variety of types of heads-from simple hand coils to complex automatic bones. The more difficult the device of this mechanism, the more likely its breakdown. What to do if the coil does not spin, the string is not served or broken, as well as with other malfunctions. In the material further.

EASIEST WAY TO STRING YOUR WEED EATER

Lower gearbox

Stihl lawn mowers are well.Deserved popularity

The second class belong to universal medium.Power units up to 2.2 liters.With., intended for field and landscape work. In such designs, a straight hard shaft is used, which allows you to equip this class with saw steel knives for nozzles with help which can be cut down by shrubs and small trees. The design provides for a conical served gearbox. What lubricant to use for the reducer of the lawn mower. A special, under the brand name is the name “stihl” or ordinary Russian lubricant lithol.

Engines from 6.3 to 8 liters.C is intended for professional use in forest or horticultural farms. The name of them is black cutters, these are the most powerful motorcycles for working in large areas, cutting small shrubs and trees. In the arsenal of a working tool there are saw wheels for cleaning bushes with a diameter up to 7cm. Bigorezes are equipped with an anti.Vibration system, thanks to which working with such a tool becomes more comfortable. What lubricant to lubricate the gearbox of the lawn mower with powerful drive mechanisms, the lubrication of the Reducer of the Stihl lawn mower is carried out by special proprietary or grease “STIHL” or Russian production Litol 24.

Characteristic malfunctions and their independent elimination

Naturally, during operation, the owners of the trimmers are faced with certain malfunctions of mowing heads. Over, they are most often associated with certain difficulties in pulling (lengthening) of the cutting cord from the coil. The most common causes of the lack of fishing line is its “bite” between the turns or sticking.

If the string is not served

In this case, the cause of the defect is incorrect winding of the cutting cord. A trimmer fishing line can be wound with insufficient tension, which helps to cross the turns together and confuse the string. When the coil rotates, the cutting cord under the influence of the emerging centrifugal force is delayed, which in turn leads to the clamping of the free end of the fishing line between the turns. To eliminate this malfunction, you need to dismantle the coil, disassemble it and rewind the string so that the turns lie down in even rows, pressing tightly against each other.

If the string sticks together

Squeezing the turns of the fishing line directly in the mowing head can be caused:

Advice! To avoid sticking the cord inside the mowing head, experts recommend applying a thin layer of silicone lubricant after refueling the string to the coil. In addition, it is better not to use a fishing line for a trimmer of unknown manufacturers.

If, nevertheless, the user could not avoid sticking the fishing line, then to repair the trimmer coil for the grass, you need to remove and replace the existing cord with a better.

If there is too much string consumption

When using semi-automatic mowing heads, the user can detect the accelerated consumption of the cutting cord due to its spontaneous lengthening. As a rule, this happens due to the weakening of the spring installed inside the coil. You can eliminate the malfunction by putting several goals under the spring.

If the bobbin does not spin

The refusal to work the semi.Automatic coil of the trimmer for the grass can also be caused by a frequent clash of its head with solid objects (dry branches, soil, stones, etc.). In this situation, there is a slight stretching of the fishing line, and then the rapid retraction of it inside the bobbin. Due to severe friction, the cord is heated, which can lead to sticking its turns to each other. To eliminate the defect, the string will need to be rewound.

If the string is served spontaneously

Spontaneous lengthening of the fishing line, followed by trimming its tips, may be caused by a violation of the order of assembly of the head after replacing the cutting cord. Often, users who do not have sufficient experience forget to install the pressing spring inside the head, which causes premature operation of the mechanism responsible for the supply of fishing line.

Dismantling the spit head

Starting the repair of the head of the trimmer for grass, the owner needs to protect yourself from injuries when randomly starting the engine, for which you must completely de.Energize the electric garden tool or drown out the engine motorcycle engine. Most often, the owner of a trimmer for grass is faced with the need to replace the cutting cord. This process is started after the head is dismantled from the shaft. This must be done carefully to avoid damage it.

Important! The gearbox shaft, which is equipped with a trimmer for grass, has a left thread at the end, so the mowing head is taped clockwise when removing.

Dismantle the coil in the following order:

  • Having combined the holes available on the axis and washer, the mowing shaft is rigidly fixed by means of a screwdriver or a metal rod;
  • Unscrew the executive mechanism, rotating its case clockwise.

Having removed the braid head, they begin to disassemble it, for which you need to carefully open the lid, which is most often attached specially provided for by plastic locks. To do this, squeeze the edges of the lid and at the same time drown in the hull of the latch.

Attention! If the trimmer for the grass is equipped with a semi.Automatic head with a button at the bottom, then it needs to be opened by observing special caution, when removing the cover, a pressing spring can fly out and get lost.

Charging the string in the spool

To charge the fishing line for the trimmer correctly, it is necessary to act according to the instructions for the operation attached to the trimmer. As a rule, this operation is carried out as follows:

  • Cut off the right amount of cord and fold it in half;
  • The resulting loop is inserted into one of the specially provided grooves (holes) of the spool;
  • Pulling the fishing line for the trimmer, they turn the spool counterclockwise several times, while the coats of the cord should be laid in dense layers (one to the other), avoiding overlaps;
  • Having finished winding, the ends of the fishing line (about 20 cm) are left free, which are fixed in the grooves available on the sides of the spool;
  • Mount the mechanism in their place, for which it is necessary to assemble it in the reverse order, returning to its original position all the available details (spring, washers, etc.), and install the coil with a string in the body of the head;
  • The free ends of the cord are passed through the existing eyes (holes), after which the body is closed with a lid, which is fixed with latches.

On this charge of the spitter head, the cord can be considered complete. The coil is screwed onto the shaft of a trimmer for the grass, having previously stiffly fix it. How to do this described above. You can check the performance of the head by mowing a small area of ​​the lawn.

Advice! In those cases when the owner of a trimmer for grass prefers to replace the failed head of the new one, experts recommend avoiding the acquisition of cheap non.Original coils brought from China.

Method 2. How to dress a fishing line for a trimmer to a coil of motorcycles with a photo description and video

The second method differs from the first in that not a whole piece of equipment is charged into the coil, but segments of two parts. Manufacturers use this way, and it is also suitable for those who have the remains of the material. The principle of how to insert two segments of the fishing line into the tip of the motorcycles, the same with the first way, and to make sure of this, below is a detailed instruction:

  • There are two equal lengths of the segment of the material that you can use
  • One segment is taken, and the edge is bend in the form of a clamping bracket or hook, with which the fishing line will be fixed
  • Inside the coil, there are holes in the form of a bracket for fixation, which are there for a reason. If they are not, then the second option will not work. The appearance of these brackets is shown in the photo below. Each bracket is on its own
  • The line of fishing line should catch on the bracket, and make it winding in compliance with the direction of the arrow
  • The equipment is wound until the segment of 10-15 cm remains, which is fixed in the corresponding hole on the side of the tip
  • The same manipulations with the second end of the fishing line are carried out
  • The protrusions are starting into the holes of the head, and then, extracting the equipment from temporary fasteners in the coil, a cover with clamps is installed

head, trimmer, grass, remove, coil

The above instructions on how to install a fishing line for a trimmer in a motorcycle will help not only correctly, but also quickly perform a replacement procedure. The assembly of the coil of the trimmer for the grass, as mentioned above, can be performed without removing the head, but in this case you will need to conveniently fix the tool. Video Instruction is presented below.

Method 1. How to correct the fishing line for a trimmer or put it on a coil and choose the required length

To implement this method, you will need to pre.Prepare a fishing line for a trimmer of the required length (usually up to 4 meters). It all depends on the thickness of the equipment used, as well as the design of the coil. There is a simple way to find out the required amount of fishing line, the refueling of which will be needed to charge the coil.

The thicker the equipment used, the less its length will need and vice versa, the thinner, the longer the segment will need.

Instructions on how to properly tie the equipment into a tip of a trimmer for grass or motorcycles is the following look:

    To begin with, a segment of the fishing line, which was prepared to install in a coil, must be folded in half. In this case, one edge should be more than the second by 10-15 cm

With how to put the drum in place, no difficulties arise. There is a second way to charge mowing equipment into a motorcycle. How is it different, and how the second method of refueling the fishing line to the coil of motorcycles is carried out, we will find out in detail.

| Denial of responsibility | Contacts |RSS