How to embed the sink in the countertop simply and easily. step by step recommendations with video

From our article you will learn how to properly cut a hole for the sink in the countertop, what you need to consider and what is better to cut the countertop under the sink.

“To save money, so to the full,”. the thoughtful owners reason. And not only order a budget kitchen, but also plan to cut a hole in the countertop for the sink itself. True, this operation only at first glance, it seems simple. For successful results, it is necessary:

  • Know how to work with this or that material (for example, a quartz countertop will not cause difficulties);
  • have a set of necessary tools (or know where you can rent it);
  • Understand the nuances, so as not to spoil the product (expert advice is important here).

Only then you can achieve maximum quality and after completing all the work to enjoy flawless operation of the kitchen for many years.

Mounting an overhead sink

Such a sink completely overlaps the entire module of the kitchen set, installed literally in two accounts, but objectively has one characteristic disadvantage: between it and the set there will inevitably be gaps. This can lead to damage to the furniture, as moisture is sure to get inside, even with the most careful use.

How to calculate the height and depth of the kitchen cabinets you learn from our separate article Jump.

You’ll need the usual short self-tapping screws and standard mounting angles (often called “crocodiles”). 4 pieces each. First, make a mark on the inside of the headset and screw in screws at a distance of about 1 cm below the top. Only screw in not all the way. you need to leave a margin of 0.3-0.5 cm, so that the “crocodile” freely caught on it.

After placing the sink, methodically align it in the corners. It remains to fix on the self-tapping screws those 4 corners. It is elementary: have fixed. have displaced up to a stop. And so four times.

Features of connection of communication

The next action will be the attachment of fittings to the countertop for the subsequent process of installing faucets and hoses. The siphon for convenience is fastened to the already established sink.

Included with the sink should be specialized hinges for the screw clamp, they will be in the form of legs. With their help you can much more tightly and reliably tighten the edges of the design to the countertop. It is not necessary to tighten the fastening devices with screws with great force. If you overdo it, the sides of the sink can bend upwards.

The place for the cutout is chosen taking into account the minimum distance for water drainage to the sewer and water supply connection.

Features of the connection of communication

The next action will be the attachment of the fittings to the countertop for the subsequent process of installing faucets and hoses. Siphon for convenience is fixed to the already installed sink.

Included with the sink should be specialized hinges for the screw clamp, they will be in the form of feet. With their help, you can much more tightly and securely tighten the edges of the structure to the countertop. It is not necessary to tighten the fastening devices with screws with great force. If you overdo it, the sink rims can bend upward.

The place for the cutout is chosen taking into account the minimum distance for water drainage into the sewer and water supply connection.

Selection of the sink and preparatory measures

It is not necessary to understand step by step how to perform the installation. There is also no need to know the exact dimensions. You will definitely be able to do without a jigsaw.

But all this will be possible if you ask for help from specialists, who will take care of all these issues. But this service is not the cheapest, and the price of installation sometimes exceeds the cost of the sink itself. So you can draw your own conclusions. But you will surely have to choose the product yourself. Experts and experienced professionals at home advise to choose a sink (sink) deep enough and not very high matching faucet. Still, the faucet also plays a role in this case.

A deep basin avoids splashing water, and dirty water, when you’re washing up. Plus, a deep product gives the possibility to stack quite a large number of dishes.

Not the least of the factors is the manufacturing material used.

The sinks made of stainless steel are rightly considered the easiest to install. The alternative is enameled steel, but its durability is lower.

To install the sink itself, cut a hole for the mixer, fix it on the countertop under the wood. made of fiberboard or other materials, you will need to prepare a certain set of tools and materials.

  • Jigsaw. Preferably an electric. And buy several interchangeable nozzles at once, as beginners often encounter their breakage due to unsure movements;
  • Self-tapping screws, screwdrivers or screwdrivers. The fasteners themselves and the tools for screwing them in;
  • Fixings. Most often, mounts for sinks and basins are included. Make sure of that when buying;
  • Sealant. Always water-resistant, so it can withstand the further load of water and moisture.

The sealant is applied all around the perimeter of the seating area. In this way you ensure an effective watertightness.

properly, countertop, sink

If the countertop is made of particleboard or fiberboard, then it is doubly important to use a sealant.

) Checking the sink’s fixation on the countertop.

Today there are many types and thicknesses of countertops. The clamping grip on the sink is designed for worktops up to 40 mm thick, but what to do if the situation is the opposite and the thickness is not sufficient to press firmly? It will be if the countertop is 28mm or thinner. The bracing will fix the sink, but you won’t get the “tightness” you need. This is at least not a pretty loss of moisture resistance.

To ensure that the sink is pressed tightly even with a thin countertop, you can use small “spacers” of any durable material, such as small pieces of Laminated chipboard 10mm. (see.right side of the picture below)

) Fixing the sink with screws on the brackets.

Once you have made sure that the sink will be tightly drawn by the hooks on the screed, you can proceed to complete the installation. At this stage, we can recommend that you immediately install a faucet in the hole in the sink and connect the hot and cold water hoses to it. It will be easier to do it with the sink taken off, rather than later in an obscure position and with the lack of space. Before sink sink sinking into the prepared aperture, it’s necessary to loosen the screws of clamps (counter-clockwise), so as not to damage them against the edge of countertop. Further work will take place under the sink (under countertop):

properly, countertop, sink

You can visually assess the tightness of the sink, the gap between the edge of the sink and the countertop should not exceed 1 mm (if the gasket allows). Here the assembling of the steel sink is considered to be finished! If you still have questions, we’re always happy to answer them in the Комментарии и мнения владельцев or on any of our other contacts.

Stainless steel sinks: round and oval, coming to the warehouse in Khabarovsk.

Steel kitchen sinks today, perhaps, occupy the first place among all kinds of sinks for the kitchen. Sinks are made of stainless steel, have different thickness (on the average 1.0,6 mm) and various.

Tabletop retractable mortise extension 60mm with USB (drawing, dimensions, parameters)

Rack-mountable, recessed extension cord with USB port for low-voltage power supply. Parameters, classification, acceptable usage standards and detailed drawings of the product (see Technical Drawing and Technical Specifications). image below).

Table extension mortise 60mm (drawing, dimensions, parameters)

Retractable (vertical) recessed round extension with sockets. Parameters, classification, acceptable usage standards and detailed drawings of the product (see drawing below). illustration below). extension.

Shoe cabinet swivel (installation instructions and drawing)

Installation and mounting dimensions for installation (assembly) of furniture shoe boxes. The standard kit for making hinged shoeboxes includes 2 sidewalls, swivel mounts and stops. Kark.

Tricks of professional installation

The main difficulties in installation arise when making the hole: if the gap between the edge of the countertop and the bowl is too big, the legs of the fasteners can bend. If your hand is not steady, it is better not to hit the marking trimmer line when cutting, but to adjust the size with a rasp if necessary.

When the sink is pressed down, the silicone must not burst. It is better to squeeze a small drop from a tube beforehand and observe how long it takes to form a sufficiently strong film on the surface.

Do not overtighten the fastening screws, especially in the case of a larger clearance. This causes the sides of the sink to bend upward instead of pressing down. The small gap between the edge and the countertop can also be sealed with silicone.

| Denial of responsibility | Contacts |RSS