How to put a fishing line for a trimmer on a trimmer for grass

You can additionally “pump” the unit to mow not only grass, but also weeds and young growth. This does not require expensive tools or special skills. As they say, everything is brilliant just!

fishing, line, trimmer, ectric, grass

  • Chain from the old chainsaw;
  • A cup bent inside, which is used to attach a trimmer for grass;
  • Washer and nut;
  • Vise, marker and ruler;
  • Welding machine;
  • Drill;
  • Metal for metal.

The length from the ends of the chain to the puck should be the same.

How to change the trimmer line on a Ryobi 18 volt cordless string trimmer

Failure adjustment

If the performance when mowing falls, it is necessary to adjust the thread. The length of the thread during mowing can be optimally configured at any time by light touch (arrow) of the thread head to the floor. However, this is possible only if the thread peeps out. 3 cm.

A knife for cutting a thread (see. P. 8, d/8) automatically cuts too long the ends of the thread if the ends of the thread is shorter than 3 cm, the length of the thread must be built manually for this should be pressed button and pull the thread with force. Attention: cleaning the thread head, replacement of the thread and a reserve tuning of the length of the thread can only be done with the engine turned off and a pulled plug-in network fork!

TOP-3 models with core

Elitech 0809.006500 3 mm

A reliable option with a core and a section of 3 mm. Form of execution. A twisted square. This solution allows you to quickly clean the site from high grass and give the lawn a well.Groomed look. Sold in convenient packaging. The material does not require constant care, it is enough only to store it correctly.

  • The spiral form cuts grass well;
  • There is a core in the center;
  • Cord in moderation of flexible;
  • Wear resistance;
  • Available cost.

Siat Premium Twin Power Circle 2.4 mm

A great option for maintaining a lawn in a well.Groomed state. The diameter of the cord is 2.4 mm. There is a high.Quality core. Form of section. Circle. The product copes with small and medium grass perfectly, leaving only an even cut. Siat Premium Twin Power is made of solid material. Durability and efficiency are the main advantages, in addition, it does not deteriorate from a blow to stones or metal.

  • A large amount of fishing line;
  • Efficiency;
  • High service life;
  • Does not require special operating conditions;
  • Strength;
  • Nice shape.

Rezer Ultra-Pro Square with core 2.4 mm

25-meter cord, which is designed for fast and high-quality cut of grass. Fishing section. 2.4 mm. The core sensations are made of solid plastic, and not from steel, like the previous version. Rezer Ultra-Pro has a low price, as well as good strength indicators.

Rezer Ultra-Pro Square with core 2.4 mm

How to refuel a fishing line for a trimmer to a trimmer coil for grass

To replace the fishing line in the trimmer, cut a piece of material of the desired size, folding it in half. One of the halves should be 5-10 cm longer than the second.

In order to correctly wind the fishing line for a trimmer to the coil, the middle of the thread, folded by a loop, you need to place in the groove of the central partition. One half of the forest is tightly wound on the upper part of the part, the second. On the lower. A longer part is wound on the bottom. Winding is carried out in the direction opposite to the direction of rotation of the head. An arrow should be drawn on the lid or side of the head. It shows the direction of rotation. It is necessary to wrap the forest in the reverse arrow direction. Do the job carefully, tightly pressing the turn to the turn.

See also  What is the best grass trimmer for gasoline?

Insert the remaining ends with a length of 10-15 cm into the slots on the upper side of the coil, this will fix them. The coil is not unwound with fixed ends.

If you do not have a fishing line of the desired length, you can wind the forest with more than one piece, but two. In this case, bend the end of the forest with hook and insert it into the slot of the central partition of the bobbin. Do the same with the second piece. Now wrap first a piece first, and then the other to your half of the coil against its direction of rotation.

To refuel a fishing line for a trimmer in a trimmer for grass, insert its ends into the holes of the mowing head and pull them out. Plant the coil on the axis and push down so that it sat in its place, and again pull the ends of the cutting thread to pull them out the entire length.

The ends brought out should almost reach the protective casing. Cut the excess. To do this, you can use the steel plate installed on the casing, which plays the role of a knife and automatically cuts a fishing line for a trimmer of excessive length when promoting the head.

Bobina closes with a protective lid. Put it in place and press it down to the click that the latch will be published by falling into the grooves. Always check whether the cover has stood on the trimmer for the grass and whether the latches snapped, otherwise it may jump off during operation. In this case, the reel will throw the reel force.

Do not try to wrap the material as much as possible. In this case, the coil may not fall into place and there will be problems with the installation and fixation of the lid. It is better if the coil is filled with wood so that it does not go beyond the dimensions of the details.

In addition to mechanical braids with two blades, there are also models with one. Their differences are that the cutting thread is displayed only on one side. The coil in such versions of the braid may not have a central partition, instead of it, a slot in the lower side is used to install a non.Working end of the thread, there is also a slot for fixing the working end in the upper.

With a replaced forest, you can start work. Do not mow thick weeds and bush branches. This is not work for braids for grass. In order to avoid injuries and a break in the forest, make sure that stones and branches do not fall under the braid.

To download the lawn of one refueling coil with a reinforced fishing line is enough for an area of ​​400-600 m2.

After the cutting thread as a result of the work is worn out, turn off the braid and remove the lid on the mowing head. Pull out from the slot of the forest, stretching it to the desired length, and insert it again in the slot. The amount of material wound on the coil is enough for 5-10 cycles of work depending on the model of the device. When you install the lid in place, carefully look at whether the grooves were clogged where the latches are inserted, if they are clogged, then carefully clean them.

When the fishing line for the trimmer is worn out, you need to disassemble the braid head again, pull out the coil and wind up the work fishing line for the trimmer again.

Preparation. Remove and disassemble the rogue

In most models of electroly and benzotrimmers, to replace the fishing line, you will need to remove the coil. FUBAG tool (electrimmers and benzoprimers) allows you to skip this stage. For the instruction to be universal, we will still consider it in detail:

One. Fix the shaft. Insert a stop element into the corresponding hole. They may be a thin screwdriver or a metal rod.

Unscrew the spool body. In our example. Strictly in the direction clockwise.

Unscrew the lid in accordance with the direction indicated on the case.

The preparatory stage has been passed. You can go to the winding of the fishing line.

Preparation. Remove and disassemble the rogue

In most models of electroly and benzotrimmers, to replace the fishing line, you will need to remove the coil. FUBAG tool (electrimmers and benzoprimers) allows you to skip this stage. For the instruction to be universal, we will still consider it in detail:

One. Fix the shaft. Insert a stop element into the corresponding hole. They may be a thin screwdriver or a metal rod.

See also  How to calculate gasoline for a trimmer for grass. The device of the fuel system of the chainsaw

Unscrew the spool body. In our example. Strictly in the direction clockwise.

Unscrew the lid in accordance with the direction indicated on the case.

The preparatory stage has been passed. You can go to the winding of the fishing line.

Which line for trimmer is used for a trimmer for grass?

Depending on the model of the trimmer for grass, choose the thickness of the working fishing line from 1.2 to 4 mm. The thicker the diameter of the fishing line, the thicker and tougher the grass that can be mowed by. The most common fishing thickness is two millimeters.

  • The most durable is rounded;
  • For mowing soft vegetation. Curly;
  • For mowing thin grass. With notches;
  • Special. Approaches certain types of trimmer for grass.

The type of cross section of the cutting thread should correspond to the vegetation that must be mowed.

If it is necessary to replace the fishing line for the trimmer, then it is necessary to select exactly the type that is recommended by the manufacturer of this particular trimmer model for the grass, that is, the thickness of the cutting thread should fit under the engine power and the unit value.

It is better to choose a specialized cutting thread. It is worth soaking a fishing line for a trimmer for a while if you plan to replace it in a coil.

After soaking, it acquires an elastic look and becomes stronger.

The cutting thread can be made of different components. The most common among them is nylon.

This material is characterized by a high degree of wear resistance, the ability to withstand various temperatures and high loads.

You can store fishing line for a nylon trimmer for a long time, it does not dry out and does not lose its strength.

Therefore, its service life can be quite long.

Coils or heads for motorcycles have a different structure:

  • One.Built. In the modification of such a trimmer for grass there is only one working fishing line for a trimmer. Such an unit is used mainly for small work, such as ending the grass.
  • Two.String. Can be both automatic and semi.Automatic. Here, the equipment includes two strings. Such a trimmer is used for herbs for mowing and clearing sites.

Instructions for the correct wound of the cutting thread on the coil of the trimmer for the grass:

fishing, line, trimmer, ectric, grass

First of all, you need to disassemble the head. To do this, click on the latch and turn the lid to the side

Measure the right amount of cutting thread and insert it into a slot.

Win a fishing line for a trimmer in the direction of the arrow on both sides. The ends of 15 cm long should be left not wound. These ends are inserted into opposite slots. Then the ends are fixed in the hole on the head.

Then the spool is carefully inserted into the case, for this you need to press it slightly on it.

If necessary, then you can pull the remaining ends of the thread outward. To do this, you need to pull one end of the thread first, and then the other so that they can easily pass through the slots on the head.

Now you should assemble the grooves on the case and tighten the lid.

fishing, line, trimmer, ectric, grass

Then press the spool and try to twist it all the way

If a click was heard, then the spool snapped. Next, you need to stretch the free ends of the thread to the end.

Instructions with a step.By.Step description how to wind the coil of a trimmer for grass and lawn mower

In order not to make a mistake with the choice of a suitable fishing line for your tool, you should first disassemble the head and look at the side wall of the coil. This information is usually presented on a tip, which will not allow us to make a mistake using the appropriate equipment.

If the information on the coil about what diameter the fishing line for the trimmer can be refueled, then this information can be clarified in the instructions. Having decided on the thickness or diameter of the equipment, it remains to figure out how to charge it. There are two ways for this, but not for all they are applicable. Consider both methods in details, and already depending on what models and trimmers you use, you are determined on your own which option is suitable.

It is interesting! The principle of how to wind a fishing line for a trimmer for a tip of motorcycles is appropriate not only for autonomous benzar groups, but also for electric trimmers.

Backing on a roller spool fixing

It is possible to fix backing or the main fishing line for a trimmer on a coil spool using several different nodes.

See also  Can I mow high grass with a lawnmower?

ARBOR KNOT node

ARBOR KNOT node is the simplest and most reliable knot to tie the fishing line to the roller spool. In ancient times, the knot was used to tie the bowstring to the bow. The knot is self.Izing.

CHAIN Trimmer Head !? REVIEW AND TEST #2

In order to tie the fishing line for the trimmer to the coil spool using the Arbor Knot node, follow the following actions:

  • Wrap the fishing line for the trimmer around the spool of the coil, leaving a small end, sufficient to conveniently tie the knot
  • Wrap the main fishing line for the trimmer with the free end of the fishing line and tie a knot on it, so that it glides along the main fishing line
  • Tie a knot on the free end of the fishing line, which will perform the function of the lock unit and will not allow the first knot to be unleashed
  • We moisten the knot, carefully tighten it, cut off the excess end of the fishing line so that it does not interfere when winding the fishing line on the spool

Attaching the fishing line to the roller spool using a self.Tightening loop

A simple and reliable way to tie a fishing line for a trimmer to a coil is to use a self.Intake loop. With this method of attaching the fishing line to the coil, the knot under load is tightened even more tightly, does not turn and it can easily be removed from the spool if necessary.

In order to tie a fishing line for a trimmer to a coil spool using a self.Burning loop, perform the following actions:

  • We make a small loop at the end of the fishing line, using an eight for this knot, tighten the knot tightly so that the knot is motionless
  • We extend the main fishing line for a trimmer to the resulting loop to form a large self.Tightening loop
  • We put on a large self.Tightening loop on the roller rogue
  • Rotating the handle of the coil, wrap the fishing line for the trimmer to the spool

If when rotating the coil handle rotates, the loop turns on the spray, remove it and put it on the other side.

Attaching the fishing line to the roller spool using a long loop

Tied the fishing line to the coil with a long loop, in many ways similar to the previous method with a self.Tightening loop and is its improved option.

In order to tie a fishing line for a trimmer to a coil spool using a loop length, follow the following actions:

  • Make a loop about 15 cm long at the end of the fishing line, using an eight for this, the knot should be motionless
  • Pass the main fishing line for the trimmer into the resulting long loop to form a large self.Tightening loop
  • Put on a large self.Izing loop on the roller rogue
  • Throw another round of the loop on the spool and tighten the loop
  • Rotating the handle of the coil, wrap the fishing line for the trimmer to the spool

This method of attaching the fishing line to the rogue spoon of the same advantages as the previous option: under load it is tightened even more, does not turn and can easily be removed from the spool if necessary.

Spool Knot node

SPOOL KNOT node is used to tie the fishing line to the coil spool, which is a little reminiscent of the Klinch node a bit.

In order to tie the fishing line for the trimmer to the coil spool using the SPOOL KNOT assembly, follow the following actions:

  • Wrap the end of the fishing line around the spray
  • At a certain distance from the spool, we go around the end of the fishing line the main fishing line for the trimmer, which goes to the spool
  • We make 4-5 revolutions with the end of the fishing line around the fishing line coming from the spray
  • Let the end of the fishing line through the resulting loop
  • Wet a fishing line for a trimmer, tighten the knot
  • Cut the excess end of the fishing line, rotating the handle of the coil, wrap the fishing line for the trimmer on the spool

The knot is self.Izing, the greater the load on the fishing line for the trimmer, the stronger it is delayed on the squel.

| Denial of responsibility | Contacts |RSS