Spring for a trimmer

You must start with the definition of your target audience and think about what information they would like to know about your product. View other successful and unsuccessful campaigns on kikstarter in your category. Study how they formulate their call to action, what are their remuneration system, as well as the format of their video

Ask yourself what questions were asked in these kikstarter campaigns? What awards really justified themselves, and what types of awards were not so popular? Also pay attention to whether the authors of these projects gave any interviews from which you could learn about their marketing strategy

What other types of starters are suitable for a walk.behind tractor?

Each owner of motoblocks must understand that at first absolutely all starters function perfectly and can delight their owners with such a state of affairs for about a year. But without periodic lubrication of details, their verification and the commensurate power of a jerk, such joy will not last long. Take care of the starter and he will answer you with high performance and a long service life.

Repair of the launch mechanism

When examining the disassembled starter, it is necessary to inspect the following parts (nodes) for their damage:

spring, lawn, mower, video
  • Drive pulley. The pulleys subject to high axial and radial loads should not have cracks and damage on the back. If there are such, it is required to replace it with a new part.
  • Starter spring. The main loads when starting the chainsaw are experienced by the spring. Made of high.quality carbon steel and passed special heat treatment, it loses its properties over time. If cracks or impulses are found, you will need to install a new spring.
  • The launch rope. Made of synthetic wear.resistant materials, the starter cord wear out over time. With its gusts, it is necessary to install a new rope on the pulley.

The purchased spare parts must comply with the regulations of a specific chainsaw model.

After the repair work done, it is necessary to collect the launch mechanism in the reverse order. The pulley with a ratchet is installed on top of the spring. Before the final fixation of the chainsaw starter cover, it is necessary to wrap the rope and make several trial jerks.

It must be remembered that the launch cord is previously tied through the hole in the lid.

The main breakdown of the starter of the lawn mower

Two main malfunctions of the starter of the gasoline trimmer for grass are currently spreading:

In practice, there are cases when for some reason there is damage to the starter case and a ragged cord is wound on the engine shaft, which certainly leads to a fragment of the spring and cracks on the case. In the current situation, the local repair of the starter of the lawn mower will be impossible and a complete replacement of the engine start.up unit will be required. In other cases, the elimination of malfunctions will be reduced to the replacement of the spring or cord.

Spring mechanism

The manual structure is simple, but it can be improved to save time and time. For example, put an electric steel for a walk.behind tractor. Then you will not have to pull the handle every time. But keep in mind: this design is not suitable for all starters with manual launch. And the electric circuit that you choose for installation may not be suitable for every engine.

In these cases, it is worth paying attention to the third option: the spring mechanism of engine start. After installing it on the engine, just shift the motor block handle, and it will immediately start. This type of kickstarter is based on the semi.automatic work of the spring. It accelerates the engine installed on a one.axle tractor, without the need to pull the handle with your hands. To change completely manual starter to a mechanical, it may take about two hours of time.

The main malfunctions of the starter of the trimmer for grass

It is not difficult to determine the cause of the breakdown of the starting device. There are several main options:

These details are shown in the photo below.

It may happen that the starting mechanism will be accidentally broken. The consequences will turn out to be deplorable if the ragged rope is wound around the flywheel of a working internal combustion engine: then the spring bursts, the pulley will tear off. But such cases when a complete replacement of the starting node is required, they rarely occur. In most cases, to fix the mechanism, it is enough to put a new spring or replace the cord.

Creation of marketing materials and marketing strategy for friends and relatives

Zimato, your friends and relatives will be the first depositors to your project.

Divide your friends to the following groups: close friends / relatives; people with whom you are friends, but are not in constant contact; People who are friendly and acquaintances for you.

Throw a specific message (for or e.mail) for each of these groups with which you will contact each person, depending on the segment in which it falls. When you send these messages, be sure to reinforce each of them (especially for friends and relatives) by SMS with a message or a phone call to thank them or remind them of your project.

Now that you have determined the base of your early supporters/depositors, you need to start creating a remuneration system that will allow them to show their support.

Starter assembly

The assembly of the starting node is carried out in a number of stages:

The coil is turned over, installing it so that the spring bend exactly stands into the groove of the case, as in the photo below;

When making the stated manipulations, it is necessary to lay two goals. If this is not done, then the spring over time damage the plastic cup, and when it is pulled. How to install a spring in a hand starter how to make a starter on a chainsaw yourself? How. Because of this, a feeling appears, as if the spring had flown. To eliminate such a drawback, you need to install this part of a larger length or an additional goal.

When such spare parts are absent, you can just unscrew the screw a little, and the starter knot will begin to work without shaken. But this option is temporary. it is better to repair qualitatively as quickly as possible.

How to repair a starter of a benzo.tool with your own hands?

If the starter’s cord breaks off, everything is clear: remove the old rope, take the suitable length and thickness (possibly underwear), pierce it through the hole in the reel, tie the knot. Next, pump up the spring to the required speed, only then we will fix the handle and voila! about how all this is done below.

Installing or replacing the starter of the starter motorcycles, motorcycle, trimmer for grass

But what if we have everything with a rope, and the starter coil (pulley) does not roll? Let’s look at this issue step by step on the example of the ADA Grounddrill gasoline drilling starter, which has a pulley with 2 metal antennas per 2 hooks.

In the case of other types of manual starters of the same design that are widely used in gasoline trimmers, trimmers and motor droplets, the entire starter repair process will look the same, differing only in certain aspects.

Starter repair: disassembly

Unscrew the screw that attaches the pulley to the starter cover. Remove the antenna, spring. Replacement of the starting spring of the mowing

The pulley itself is carefully removed so that the spring does not jump into the face. Even with the most accurate disassembly, it usually immediately flies out of the coil and sharply turns into a long iron strip or twists into the rings. Carefully pull out the snow.white coil of the starter

Do not injure spring! If the spring bursts or one of its hooks and hooks breaks, then easily and quickly fix the non.working starter; You need to change the spring

Carefully pull out the snow.white coil of the starter. Do not injure spring!

If the spring bursts or one of its hooks and hooks breaks, then easily and quickly fix the non.working starter; You need to change the spring

In order not to spend money on the purchase of a new starter, it can only be found on sale

If the spring bursts or one of its hooks and hooks breaks, then easily and quickly fix the non.working starter; You need to change the spring. In order not to spend money on the purchase of a new starter, it can only be found on sale.

If the starter’s spring is just broken, t. E. One of the hooks is not hooked, just glue it, if necessary, tighten the hooks a little denser (just do not break!) Install the spring with an outward hook in the pulley groove and start twist it, immediately holding your fingers inside the coil and preventing it from jumping out.

Clutching the spring to the pulley, we radially tighten the spring inside

in leadership for gasolineatrimmer for grass ? This can be done at home. to me.

How to change the starter cord?

It happens that in the impossibility of starting a starter is not a spring to blame, but the cord itself. He can seize or completely break. Dismantling the starter of the lawn mower or trimmer for grass is universal in its steps.

  • Remove the starter block from a trimmer for grass or lawn mower.
  • Unscrew the main bolt holding the handbrake.
  • Pull the coil and melt the remains of a worn cord from it.
  • Unscrew the knot on the handle of the cord and pull its end from it.
  • Untie the knot at the other end (at the beginning of the coil) and remove the old cord. The nodes that have become tight are unleashed with pliers or ticks.
  • Tie a knot on one of the ends of the new cord, prone it through the hole at the beginning of the coil (closer to its axis).
  • Shin a few turns of a new cord to the coil. If it is long, then cut the excess.
  • Season and soak the spring tensioner (if it starred) and spring.loaded elements in the correct sequence.
  • Put the coil in place and take the free end of the cord to the outlet of the starter and in the handle.
  • Install the starter block in place.

Twist the starter by the cord, start the engine of the lawn mower or a trimmer for grass. The larger and more powerful the engine, the more cord jerks will be required when starting, the norm is no more than 7 times. The result is a quick and smooth launch of the motor, the readiness of the unit for work.

About how to change the starter cord, watch in the video.

Signs and reasons for the failure of the starter mechanism

In the rarest situations, the starter mechanism is broken with inaccurate operation of the tool. The consequences can be nasty: deformed cord

wound on a flywheel of a working motor, tears the pulley, and the spring bursts. But these are isolated cases, a complete replacement of the starter is required very occasionally.

Replacement of the cord

In order to change the element, in the coil it is necessary to find a hole for it, through which to skip the cord, and later tie the knot. Then you will need to take a coil with a spring, having completed several revolutions.

For example, if the cord turns around the circumference 6 times, then in order to pull the spring, you need to turn the coil on the clock 6 times. After which it remains only to pass the rope through the hole and fix the handle on the cord.

Removal and analysis of the node

The procedure for disassembling the starter is to perform a certain sequence of actions:

  • At first, you need to find the screw connecting the starter cover with the pulley, and turn it out;
  • Later it is necessary to pull out a spring, antennae and washers;
  • Then you should carefully remove the pulley, holding the structure away from the face, so that the bounced spring does not injure the user;
  • Then you need to look around the spring: if it is damaged, then it is necessary to put the latest (the price of such details is low), and if it jumped out of the hook, you need to return it to the initial place, having previously made an excess if they broke off.

Read how to mow tall grass properly with a trimmer

Collection and installation to the starter place

  • Turn the pulley with the spring down and place the body inside so that the spring wrist will get exactly into the groove of the case;
  • install the puck, then the spring, on top of it. the second washer;
  • On top of the washer, place a cup of antennae and screw the screw.
spring, lawn, mower, video

When assembling, both goals should certainly be put, in an unpleasant case, a plastic cup after some time will be damaged by a spring, and when tightening the cord, the user will see that it was jammed. It will look as if a spring has flown. To eliminate such a breakdown, you will need to install a larger screw or another goal. If you find the required details it does not seem likely, it is quite slightly loosen the screw, after which the starter will not jam. But it is necessary to realize that these are temporary measures, and the malfunction should be fixed as soon as possible.

Sprinking spring

Spring winding is a complex procedure. Not everyone goes out to install the part to the place the first time, so you should not be upset with trouble. You need to repeat the samples until the acts are not crowned by the farr. If desired, you can look at the web network, where the craftsmen carefully speak and demonstrate how simple and rapidly perform this operation.

In order to wind the spring, you need to place an iris in the groove, and then, turning the coil, carefully lay the part along the inner diameter of the bobbin. With all this, the spring must be held every time with your hands. if you do not fix it, the part slips and jumps out, then the winding has to be done. When everything is made correctly, the spring holds tightly in its own place of landing.

How to repair a starter of a benzo.tool with your own hands?

If the starter’s cord breaks off, everything is clear: remove the old rope, take the suitable length and thickness (possibly underwear), pierce it through the hole in the reel, tie the knot. Next, pump up the spring to the required speed, only then we will fix the handle and voila! about how all this is done below.

Installing or replacing the starter of the starter motorcycles, motorcycle, trimmer for grass

But what if we have everything with a rope, and the starter coil (pulley) does not roll? Let’s look at this issue step by step on the example of the ADA Grounddrill gasoline drilling starter, which has a pulley with 2 metal antennas per 2 hooks.

In the case of other types of manual starters of the same design that are widely used in gasoline trimmers, trimmers and motor droplets, the entire starter repair process will look the same, differing only in certain aspects.

Starter repair: disassembly

Unscrew the screw that attaches the pulley to the starter cover. Remove the antenna, spring. Replacement of the starting spring of the mowing. The pulley itself is carefully removed so that the spring does not jump into the face. Even with the most accurate disassembly, it usually immediately flies out of the coil and sharply turns into a long iron strip or twists into the rings.

Carefully pull out the snow.white coil of the starter. Do not injure spring!

If the spring bursts or one of its hooks and hooks breaks, then easily and quickly fix the non.working starter; You need to change the spring. In order not to spend money on the purchase of a new starter, it can only be found on sale.

If the starter’s spring is just broken, t. E. One of the hooks is not hooked, just glue it, if necessary, tighten the hooks a little denser (just do not break!) Install the spring with an outward hook in the pulley groove and start twist it, immediately holding your fingers inside the coil and preventing it from jumping out.

Clutching the spring to the pulley, we radially tighten the spring inside

Family Brovchenko. Springing a spring in a hand starter of a lawn mower.

in leadership for gasolineatrimmer for grass ? This can be done at home. to me.

How to replace or put a starter spring in place?

If everything turned out to be in order with the rope at the starter, the suspicion falls on the coil itself. It is driven by a strip spring rolled into a roll. To change the spring, certain steps should be taken.

  • Remove the starter from the lawn mower.
  • Remove the starter coil.
  • Unscrew the main bolt holding the pulley on the case.
  • Pull the exciting antennae and the spring, the strip spring is almost completely straightened or folded by rings of a larger diameter.
  • Hold it in advance.
  • Check if the spring is valid (there may be rusty stains, breaks, etc. D.). If the hooks at its ends are cut off, the new ones will not be bent. high.carbon steel breaks when trying to bend it. Weakened hooks are suitable for easy bending.
  • Make sure that an auxiliary (ordinary) spring with washers in place. These details protect the coil frame from the end of the main spring with the ends. If the washers and the spring are broken, but there are no new ones, do not screw the coil bolt hard, but follow it. it can unscrew and get lost.
  • If the main (flat) spring is damaged, insert the same new. Put the hook at the end of the spring in its place and bend it, inserting the turn behind the turn into the space where it should be and should be.

The rewinding of the spring is performed in a minute. Oknovka in this action is gained quickly.

How to replace or put a starter spring in place, watch in the next video.

Removing and disassembling the starter, replacing broken parts

To repair the starter of the trimmer for the grass, it will be useful to disassemble it first, and later collect it. This process is not a particularly difficult occupation. For work, a screwdriver with a suitable shape is useful for work.

Everything should be done neatly, observing safety precautions, acceptable, so that the spring does not injure the master when random.

Parsing the starting node

The start.up mechanism is disassembled in order to establish new details of the incorporation broken in the subsequent sequence:

  • spin a screw with a screwdriver, fixing the pulley with a starter lid;
  • take out a spring and antennae;
  • Remove the pulley neatly (it is necessary to unscrew your head or work with all this, putting on your glasses and gloves earlier);
  • determine why the starting mechanism has broken;
  • If the spring collapsed virtually one hundred percent, then it is replaced;
  • When the spring exits from the hook, it is installed in the original place, bending the antennae before that (the photo shows the styling process);

After the spring plate is installed inside the groove, carefully make it twisting

To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst

Even if you carefully remove the video, then the spring strip flies very rapidly from the coil and can injure the hand with its sharpened edges

To put a spring plate in the same place does not always go out. It often slips, because the samples are required to repeat to the merit.

Starter assembly

The assembly of the starting node is carried out in a row of steps:

The coil is turned over, installing it so that the spring bend will definitely stand in the groove of the case, as in the photo below;

When making the stated manipulations, you must definitely lay two goals. If this is not done, then the spring over time damage the plastic cup, and when it is pulled, the jerking off will begin. Because of this, there is a feeling that the spring has flown away. In order to remove such a defect, it is necessary to install this part of a larger length or an additional goal.

When such spare parts are absent, you can just unscrew the screw a little, and the starting node will begin to work without shaken. But such an option is temporary. it is better to repair excellently as a razor as possible.

Spring tension

After installing the spring, it should be pulled. For this they make subsequent deeds:

  • Remove the handle from the starter cord;
  • Then the rope is inserted into the coil groove;
  • create a stretch of the spring, rotating the coil in the direction of the back of the clockwise (views);
  • make the required number of revolutions indicated in the operating annotation for the used trimmer model for the grass and the corresponding length of the cord used;
  • At the very end, the rope is threaded into the hole created for this, located in the starter cover;
  • put the handle in place, fixing it with a node.

If after the repair the spring continues to fly, then you can get rid of this by subsequent methods:

  • Squeeze the suitable piece of the plate into the groove at the location of the spring hook;
  • drill holes from the 2nd sides of the groove in the coil, into which stick the sprout hook and fix it with a wire.

Replacing a torn cord

A torn rope is replaced in such a sequence:

  • an old cord is removed;
  • choose a suitable rope (thickness and length);
  • Having reached it through a special hole in the coil, a knot is tied;
  • Sprinkle a spring, producing the required number of revolutions;
  • Fix the pen.

It is better to take a stretch of a spring plate, coupled with a partner, so that the edge of the cord does not hit the top mechanism inside.

It is not difficult to assemble a starter on a trimmer and wound a spring, only you should do it intently and with caution. For various models, gas tanks are similar, because they are repaired in a similar way

With all this, there are certain aspects associated with their constructive features.

Craftsman Lawn Mower Control Cable Replacement #946-04661A

Removing and disassembling the starter, replacing broken parts

To repair the starter of the trimmer for the grass, you will need to disassemble it first, and then collect it. This process is not a particularly difficult occupation. For work, you will need a screwdriver with the tip of the desired shape.

Everything should be done carefully, observing safety precautions, mainly that the spring does not injure the master if an accident.

Parsing the starting node

They disassemble the launch mechanism in order to install new parts instead of broken in the following sequence:

  • spin a screw with a screwdriver, fixing the pulley with a starter lid;
  • take out a spring and antennae;
  • Remove carefully with the pulley (you need to unscrew the head or work, having dressed the glasses and gloves before);
  • determine why the launch mechanism has broken;
  • If the spring collapses almost completely, then it is replaced;
  • When the spring exits from the hook, it is installed in the original place, bending the antennae before this (the photographs show the laying process);

After the spring plate is installed inside the groove, it is carefully twisted. To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst. Even if you carefully remove the video, then the spring strip flies very quickly from the coil and can injure your hand with its sharp edges

Even if you carefully remove the video, then the spring strip flies very quickly from the coil and can injure your hand with its sharp edges

To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst

Even if you carefully remove the video, then the spring strip flies very quickly from the coil and can injure your hand with its sharp edges

Immediately putting a springy plate in the same place does not always work. It often slips, so attempts are required to repeat until the desired result is achieved.

Starter assembly

The assembly of the starting node is carried out in a number of stages:

The coil is turned over, installing it so that the spring bend exactly stands into the groove of the case, as in the photo below;

When making the stated manipulations, it is necessary to lay two goals. If this is not done, then the spring over time damage the plastic cup, and when it is pulled. Because of this, a feeling appears, as if the spring had flown. To eliminate such a drawback, you need to install this part of a larger length or an additional goal.

When such spare parts are absent, you can just unscrew the screw a little, and the starter knot will begin to work without shaken. But this option is temporary. it is better to repair qualitatively as quickly as possible.

Spring tension

After installing the spring, it should be pulled. The following actions are performed for this:

  • Remove the handle from the starter cord;
  • Then the rope is inserted into the coil groove;
  • They stretch the spring, rotating the coil in the direction opposite to the clock of the clock arrow (reviews);
  • make the desired number of revolutions specified in the instructions for the use of the trimmer model used and the corresponding length of the cord used;
  • At the very end, the rope is threaded into a hole designed for this, located in the starter cover;
  • put the handle in place, fixing it with a node.

How to Repair a Small Engine Recoil Starter

If after the repair the spring continues to fly, then you can get rid of this in the following ways:

  • Squeeze the suitable piece of the plate into the groove at the location of the spring hook;
  • drill holes on two sides of the groove in the coil, into which the spring hook is inserted and fix it using a wire.

Replacing a torn cord

A torn rope is replaced in the following sequence:

  • The old cord is removed;
  • choose a suitable rope (thickness and length);
  • Having reached it through a special hole in the coil, a knot is tied;
  • Sprinkle a spring, producing the required number of revolutions;
  • Fix the pen.

It is better to stretch the spring plate along with the partner so that the edge of the cord does not hit the starter mechanism.

It is easy to assemble a starter on a trimmer and wound a spring, only you should do it carefully and with caution. For different models, the gas tanks of the launching mechanisms are the same, so they are repaired in a similar way. In this case, there are some nuances associated with their constructive features

In this case, there are some nuances associated with their constructive features.

Important! When winding and installing the spring, it should be remembered that it is hot, which means that it can burst if you make too much effort. The new part is inexpensive, but you will have to spend time on its search, which means that work on mowing the grass will move endlessly

spring, lawn, mower, video

To wind the spring, it is necessary to place the bend in the groove, and then, rotating the coil, carefully lay the part along the inner diameter of the coil. In this case, the spring should constantly hold on. If it is not fixed, the part slides and jumped out, then you must again wind. With proper execution, the spring fit tightly to its saddle.

Replacement of the cord

To replace the element in the coil, you need to find the hole through which the cord passes, and then tie the knot. Next, you will need to wind the coil for several revolutions.

The note! You can find out the exact number of revolutions by reading the instructions of the trimmer for grass or manually. To do this, measure the length of the rope and calculate how many times it can be wrapped around the coil.

For example, if the cord rotates in a circle six times, then to tighten the spring, you need to turn the coil by the clock six times. After that, you just need to let the rope through the hole and fix the handle on the cord.

Assembly and installation instead of a starter

To collect the starter and install it in the same place, you need:

When assembling, be sure to install both goals, otherwise after some time the plastic cup will be damaged by the spring, and when the cord is stretched, the user will notice that it jammed. It looks like spring has come. To correct such a breakdown, it is necessary to install a larger screw or another washer. If you cannot find the details you need, just unscrew the screw slightly, and the starter will no longer jam. However, you must understand that these are temporary measures and that you should correct the problem as soon as possible.

Prevention of problems

Sooner or later, problems with the starter arise on any trimmer. STIHL FS 55, MTD 790 or other brand

This malfunction can be postponed, but the tool should be treated carefully. In particular, do not make too sharp jerks, it will break the cord or spring

It is not recommended to expose a brush to impacts or other physical influences. In the case of a breakdown of the starter case and the cut of the cord, it can be wound on the engine flywheel. It will break the pulley and break the spring.

Therefore, having discovered that the executive mechanism has broken on the uterus, do not immediately rush with the help of specialists. Knowing how to eliminate problems and / or replace the details, you can carry out repair work yourself. This does not require a special tool. At first, the procedure may seem complex and tiring, but numerous online video on the repair of the starter can help you solve the problem as quickly and easily as possible.

| Denial of responsibility | Contacts |RSS