Orthodox icons and prayers

“Save me, God!””. Thank you for visiting our site before starting to study information, please subscribe to our Orthodox community on Instagram, save and save †. Https: // www.Instagram.COM/Spasi.Gospodi/. The community has more than 60,000 subscribers.

We, like.Minded people, are a lot and we quickly grow, lay out prayers, the statements of saints, prayer requests, and timely lay out useful information about holidays and Orthodox events. Subscribe. Angel of the Guardian to you!

Having once fallen under such a magical influence as damage, after its deliverance, he tries to provide protection from the evil eye and damage, so that in the future it is no longer a negative impact. Of course, after guidance of damage, not everyone immediately understands that they are under its influence, but when, after analyzing the latest events, you find that you are spoiling, despite many different ways to get rid of all magical influences, the best is visiting the church.

It is advisable not just to come to pray and put a candle for health. Priests recommend communion and confess. But this is not a single way to protect yourself from negative impact, there are other methods that we will consider below.

WARNING: Never Do This To ANY Leaf Blower (Check Out Now)

protection, trimmer, grass, nozzle

How to put a protective casing on a trimmer for Redverg grass

Type of lawn mower, for example, a trimmer for grass, it is divided into several main categories: gasoline, battery, mechanical and electric. Everyone has a unique structure.

In a gasoline engine, the fuel is mixed with the air until it enters the cylinder, and then the spark of the spark plug lights up. The power is regulated by the amount of the mixture supplied using a handle or gas pedal. The gasoline engine has high speed and specific power with a relatively low noise level. It has a simple design. The main drawback. Fuel consumption.

The electric motor he produces not only environmentally friendly work, but also a much lower noise level. For an electric engine to work, it must be connected to a power source, for example, to a voltage of 220-380 volts.

The advantage of a battery type of battery is that you do not need a constant connection to the mains. The tool allows you to work intensively until the battery is discharged.

Trimmers for grass gasoline, electric or even rechargeable. They are equipped with engines that are another place. Most models of gasoline trimmers are the upper engine. The upper trimmers for engine grass are more practical, correctly balanced and have high power, which is great for intensive processing of the lawn. Such engines have good cooling and are most protected from mechanical damage and moisture.

With the bottom of the engine, as a rule, electric models of a trimmer for grass are available. They are characterized by low power and small overall dimensions. They also cool poorly and have some length restrictions on. They do not have protection against moisture and mechanical damage.

High voltage lawn machines as here is a trimmer for grass, measured in volt (c) and shows the necessary level of power of the electric network, as well as the level of insulation of electrical equipment. Transmission, distribution and transformation are carried out in accordance with the requirements of consumers and the capabilities of sources. Voltage values ​​for the network are set according to GOST.

Modern trimmers for grass are designed to leave the Luzhaika, depending on the model, the cutting elements can be equipped with different ones, this can be used to mow a variety of vegetation. The most common nozzle is a fishing line for a trimmer of hair growth or, as it is called, a cord. The main purpose: mowing of grass in not very running places (it is convenient to go around fences, trees, buildings). It is wound on a special head with the release of a pair of ends that serve as a cutting tool. They can be a thickness of 0.8 to 5 mm. Thick hairs are used on powerful gasoline trimmers and can cut large weeds, thick stems of dry grass and soft young growth of small shrubs. Disgles up to 2 millimeters are used mainly on electric trimmers because they have a less powerful engine and design. According to the method of release of the fishing line for a trimmer, it is divided into: manual, semi.Automatic (the cord is stretched from the head when the operator presses it to the ground) and automatic (the fishing line for the trimmer is lengthens to the required length when setting speed). In the latter case, the large consumption of the cutting element, so the most popular are semi.Automatic models. In the case of trimming thicker grass or shrubs, a knife or disk is used. The knife can be made of plastic or metal and have a different amount of blades. For the most difficult works (shrubs, small young trees), metal disks with a large number of teeth are used. Some models of trimmers can be equipped with a saw canvas (a cut in height) designed for pruning trees. The possibility of using knives and blades depends on the power of the engine and the design of the trimmer for the grass, it is necessary to clearly follow the instructions. For curved core models, you can use fishing rods and small plastic knives. Metal knives and discs are used on direct trimmers. Because such a design is safer for the operator (the larger the distance from the cutting head, a special handle, emphasis). When a knife or disk touches a solid surface, it is often thrown back. In addition, a heavier tool creates a large load on the nodes and components of the trimmer for grass.

The width of the cutting of a trimmer for grass. The width of the lawn mower is cut into one revolution. The larger the cutting element, the more the workpiece is captured during operation. The large width of the nobility is ideal for processing large open areas, in just a few passes.

The handle of a trimmer for the grass is designed for convenient management of a trimmer. It can be equipped with additional buttons responsible for the operation of the tool. The pen can be of different shapes: D-shaped, J-shaped, u-shaped, y-shaped.

An example, a D-shaped handle is great for processing small areas, but at the same time requires high maneuverability from the operator. J-handle prevents the closure of oblique gear. This pen is ideal for use with a grass knife. The combination of these elements will make your work more productive and convenient.

Y and u hands. The most popular trimmers for grass, which are great for mowing in the open air, while the mowing movements will be similar to the mowing.

The weight. The mass of the car is assembled (measured in kilograms). Despite the obvious insignificance of this parameter, it is worth paying attention to this important property of garden technology. Weight affects mobility and quality. Lawns. Too much weight can cause difficulties in unloading and loading into the car. A heavier vehicle may be required. Powerful engine with higher fuel consumption requires. However, with a small mass, problems may arise, for example, the quality of the odds of the lawn.

Safety regulations

I’ll start with this section in order to recall: any home.Made gas mowing design can cause harm to health. This requirement is especially relevant for:

Electricity does not think about your health. She creates the current path where the best conditions and less electrical resistance are provided for him. : clothing surrounding objects standing a car. There is nothing strange in this. You need to take care of yourself, apply protection means.

When creating an electric trimmer for the grass with your own hands, immediately pay attention to the strength and quality of the isolation of all current.Alkali parts both inside the engine and the outer scheme. Its installation should be performed by a qualified employee

Collector engines develop very large rotation speeds. For vacuum cleaners, they can be from 11,000 to 30,000 revolutions per minute. This is quite enough for a small pebble, a piece of wire or chips, like a bullet from a rifle, from under the cutting head.

The difference will be that the direction of the bullet selects a sniper, and a pebble from a lawn mower is a case. Where it will fly to predict it is impossible. Therefore, when working, it is necessary:

  • Ensure a stable body position, which is a general requirement;
  • Protect yourself with dense clothes made of natural cotton fabrics or jeans;
  • Put on your feet strong shoes, not open sandals;
  • Use glasses or a protective mask.

Rules and nuances of work

So that the weeding is as efficient and safe as possible, perform a sequence of actions:

  • Initially, they put on protective glasses, a respirator and clothes that will close open areas of the body.
  • Prepare a trimmer for grass and check its work at idle. If there are any malfunctions, then using such equipment for weeding is unsafe.
  • A cultivator.Type nozzle can be deepened by no more than 2 cm into the soil.
  • Weeding is carried out if the height of weeds is not more than 20 cm.
  • It is better to weed after 4 pm in dry calm weather, and experts recommend mowed weeds as natural mulch for beds.
  • Every 20-30 minutes you need to take a break. And the trimmer for the grass should relax (cool the motor), and the person who controls them.

Opinion of expert Kuznetsov Vasily Stepanovich

Before starting work, it is recommended to process the nozzle of a trimmer for grass using an alcohol solution. It is appropriate to carry out the same procedure after weeding. So you can avoid the spread of pathogens through the territory of the garden, which will save from a number of problems.

Ribbating should be done every 10-14 days. It is not recommended to leave the garden unattended, since in the presence of abundant precipitation the grass will grow much faster than cultures. And if the weeds reach half a meter, then they will have to remove them manually.

Protective casing for a trimmer for grass

Lawn mower. How to replace a broken shield. Bent a shield for a few days. Maybe I’m not lucky. T high

Direct rod in a gasoline trimmer for grass and curved in electric

Putting a metal knife on an electric trimmer for grass does not allow its design features.

  • The curved rod of the unit reduces the distance from its working part to the legs of the Kosar. In the case of a collision of blades with a stone or other hard object of a braid for grass, it is discarded to the legs.
  • The high torque, which we mentioned above, in the event of a collision of a metal knife with a solid object, transfers a large load to the flexible shaft of a trimmer for grass and its engine. What causes their premature failure.
  • Handle Electric Knules most often does not have a restrictive bar playing the role of the stop. But you should not rely only on them, since not a casing with a cutting trimmer for grass is designed for. Which does not exclude leg injury.

It is these features that allow the use of exclusively plastic knives on trimmers with electric engines. In a collision with an obstacle, the blades are destroyed, thereby protecting the legs of the mower from obtaining possible injuries.

Plastic knives cope well with outgrown and dry grass. They can mow the nettles and stems of burdocks.

The use of metal knives only on gasoline trimmers is also due to constructive features.

  • The direct design of the rod increases the distance to the legs, which provides the Cossacks with complete safety.
  • Comfortable U-shaped and J-shaped handles allow you to keep the tool firmly. D-shaped handles Motokos are equipped with a limiter resting in the leg of the Costsa, which does not allow to let the head to the legs when meeting a cutting disk with a solid obstacle.
  • The clutch of the gasoline engine allows you to smoothly gain speed to the optimal level. And when the blade collides against a hard surface, it can extinguish part of the blow.

Thus, gasoline trimmers for grass with an installed metal knife are best used in large areas. They will successfully cope not only with high coarse grass, weeds, burdocks and nettles, but also with shrubs, as well as young trees.

The shape of the blades of the disk set to the trimmer for the grass does not affect the quality of the work performed. The speed does not depend on them. Triangular, trapezoid, rectangular forms are all marketing course of manufacturers.

If you plan to prepare hay, then it is best to put knives on a motorcycle with a large number of blades

Pay attention to the wheels with eight teeth or discs with four large blades and four additional. Two and three lobed knives will greatly grind the grass

How to choose?

Before buying a nozzle, you need to determine two nuances:

  • The purpose of the weeding: if you need to remove the grass in the aisles or a front garden, then the scores will be enough. When we are talking about the beds themselves and the need to wrest the weeds with the root, preference should be given a cultivator nozzle with teeth, exciting unwanted vegetation.
  • Work volumes: if this is a huge plantation, then the fishing line for a trimmer cannot cope with the task, especially in the presence of dense and high weeds (it is better to take disk). And for work between the beds, there will be enough fishing line, which costs 2-3 times cheaper than a disk nozzle, and it will be safer to approach the beds with it.

If the weeds are large, and in the arsenal there is only a head with a fishing line, then you can not even start work. The nozzle will be extremely difficult to cut the massive weed trunks, which will lead to overheating of the motor. A trimmer for grass, experiencing an increased load, will constantly fail and need expensive repairs.

Have several nozzles in stock, since none of them will be superfluous in the household. Mowing barely grown grass after heavy rains. The head with a fishing line will help. Remove the thickets in the garden is disk, but most carefully free the plot from weeds, removing them with the root only a cultivator.Type nozzle can.

What knives to put on an electric and a lawn mower

Before buying and putting a knife on a motorcycle, find out what they are and in what cases are used. Today, manufacturers offer the consumer a large number of types of these supplies. In general, the entire cutting tool designed for mowing grass can be classified:

The main material for the manufacture of trimmer knives can be plastic or metal. The use of such consumables largely depends on two parameters:

For safety reasons, manufacturers do not recommend putting steel knives on electric trimmers for grass. Almost all motokos operating from the electric network and battery are equipped with plastic blades. Depending on the manufacturer, they can be a solid disk design, with several blades or in the form of a special mowing head, which provides for the installation of removable plastic blades.

Direct rod in a gasoline trimmer for grass and curved in electric

Putting a metal knife on an electric trimmer for grass does not allow its design features.

  • The curved rod of the unit reduces the distance from its working part to the legs of the Kosar. In the case of a collision of blades with a stone or other hard object of a braid for grass, it is discarded to the legs.
  • The high torque, which we mentioned above, in the event of a collision of a metal knife with a solid object, transfers a large load to the flexible shaft of a trimmer for grass and its engine. What causes their premature failure.
  • Handle Electric Knules most often does not have a restrictive bar playing the role of the stop. Which does not exclude leg injury.

It is these features that allow the use of exclusively plastic knives on trimmers with electric engines. In a collision with an obstacle, the blades are destroyed, thereby protecting the legs of the mower from obtaining possible injuries.

Plastic knives cope well with outgrown and dry grass. They can mow the nettles and stems of burdocks.

Cub Cadet Wheeled String Grass Trimmer | Best Weed Cutter Machine

The use of metal knives only on gasoline trimmers is also due to constructive features.

  • The direct design of the rod increases the distance to the legs, which provides the Cossacks with complete safety.
  • Comfortable U-shaped and J-shaped handles allow you to keep the tool firmly. D-shaped handles Motokos are equipped with a limiter resting in the leg of the Costsa, which does not allow to let the head to the legs when meeting a cutting disk with a solid obstacle.
  • The clutch of the gasoline engine allows you to smoothly gain speed to the optimal level. And when the blade collides against a hard surface, it can extinguish part of the blow.

Thus, gasoline trimmers for grass with an installed metal knife are best used in large areas. They will successfully cope not only with high coarse grass, weeds, burdocks and nettles, but also with shrubs, as well as young trees.

The shape of the blades of the disk set to the trimmer for the grass does not affect the quality of the work performed. The speed does not depend on them. Triangular, trapezoid, rectangular forms are all marketing course of manufacturers.

If you plan to prepare hay, then it is best to put knives on a motorcycle with a large number of blades. Pay attention to the wheels with eight teeth or discs with four large blades and four additional. Two and three lobed knives will greatly grind the grass.

Step.By.Step instructions how to mow a benzoca with a disk of grass and save fuel

The launch of the lawn mower is required mainly on the ground. Some craftsmen know how to start the tool, holding it in their hands, but it is quite difficult and dangerous. After starting the tool, you can proceed to its use. First you should wear protective uniforms and an unloading belt.

Depending on the tool model, unloading belts can be on carbines or screeds. If a carbine or latch is used, then after starting the engine, the tool should be fixed and proceeded to work. If the screeds are used, then you need to put on the belt along with the working tool.

Initially, the belt balancing should be performed. This means that despite the total weight of the tool, the mowing should have a minimum of load. With his hands, the mowing carries out only the movement of the tool, and if you do not make balancing, then fast fatigue will be observed during operation. All weight should fall on the shoulders of the employee.

When the tool is ready for use, the instructions for ukos of grass with a benzocaum have the following view:

  • You need to make movements to the right and left, while holding a trimmer for grass at the same distance from the ground
  • The mowing movements should be unhurried (half a step). Experts call the movement of mowing duck steps
  • The biggest difficulty faced with newcomers is to maintain stable revolutions. The turns during the mowing process should be changed, which depends on the density of the vegetation. If the grass is young, then it does not need to work at all to the full capacity
  • A mower should feel the work of the tool. If a braid for grass does not cope with grass, you need to increase speed. At the same time, it is not recommended to work as a tool at full speed
  • Experts have developed such an optimal regime of the grass of the grass with benzotrimers. One way you need to increase the speed above average (almost to complete gas), and when the grass trap is moved back, the gas is dumped, while taking a step forward. This method is relevant for cases when it is necessary to gently lay the grass in the rolls

Often, among mowers, there are disputes about how to mow a trimmer, whether it is necessary to discard gas or it is better to work in constant mode. We will figure out in detail in these matters.

  • There is an opinion that it is better to mow a benzoca in one mode of revolutions. This opinion is not correct. Work with the same power not only affects the increase in fuel consumption, but also wear and tear. The discharge of gas with the reverse movement of the tool is useful, since during this period the engine is cooling, as well as the lubrication of CPH. The discharge of gas leads to the overlap of the throttle, as a result of which the fuel passes through the XX channel, and thereby lubricate the parts
  • Gas reset allows not only to mow grass, but also carefully put it in rolls. Moving the tool in one direction allows you to mow it, and when moving, a roll is created
  • The disk moves in only one direction, so it is simply pointless to keep the tool at constant speeds when it is moved in the opposite direction
  • The discharge of gas leads to the fact that the cutting disk by inertia begins to rotate the crankshaft, and the movement of the roll is always useful

If you mow a gas station in one speed mode (this is how beginners are usually done), then this will affect the increase in fuel consumption and engine overheating. For comparison, you can imagine the work of the chainsaw. The saw gives maximum turns only if necessary, but when the cutting of the tree ends, the chainsaws are working on xx, thereby it is cooling.

Device and principle of operation

The battery trimmer for grass is an electric hand.Made braid for grass with an autonomous power source included. Such models do not differ much in their design from those that use power from the network. The technique of this type is compact, mobile, but limited in the field of its application. It is suitable for grass without thick stems, soft lawn coating.

It can be used when cutting the sides of the lawn, the edges of the site along the fence, in the furrows or on the tracks.

Trimmeter models on the battery do not imply the possibilities for processing large areas, cutting hard stems, shrubs, weeds. This is an auxiliary garden technique that helps maintain order in the territory, without gasoline fumes, extra noise and complex maintenance. The design of the battery trimmer for the grass includes:

In some models of battery trimmers there is an additional support with small wheels, facilitating the movement of equipment around the site and removing the voltage from the hands and back of the person who controls the mowing.

When buying a selected model, you should pay attention to its complete set. Some manufacturers do not include a battery and a charger in a set of delivery, they have to be purchased separately, which significantly increases the cost of garden inventory.

How to mow a benzotrimer, newcomers training

The principle of operation of a trimmer for grass with interchangeable batteries is quite simple. From the electric motor, an effort is transmitted to a rotating cutting element with a fishing line or a plastic cutting disk. The motor in such models is usually located at the bottom of the bar, but there are also options in which it is attached at the top. In this case, the connection between the elements is performed by shaft.

Rods are solid, connective and telescopic, made of chrome steel, plastic or aluminum. This structural element simultaneously performs supporting functions and helps control the trimmer. During transportation, more convenient or collapsible rod options. Telescopic versions allow you to adjust to the growth of the user.

| Denial of responsibility | Contacts |RSS