DIY snowmobile from a motor cultivator

To create a walk.On snow and swarm, adhere to an approximate plan:

  • Strengthening the frame or its reconstruction is carried out by installing additional pipes.
  • The motor and steering wheel are placed on the frame.
  • The chassis and front stars are also installed here.
  • An intermediate shaft with rubber lining is installed.

For chassis, you can use tires or caterpillars. Each option is special in its own way, and all the characteristics for creating a caterpillar and wheel unit are described above.

How to remake one.Axle tractor into a snowmobile

A snowmobile is the most suitable winter transport for our winter climate. It is distinguished by its high cross.Country ability and decent maneuverability. In addition, it does not require a large amount of fuel. The domestic market is always ready to provide various models of snowmobiles, but they are far from affected by all. However, if you have a cultivator and some tools at your disposal, then you can make winter transport yourself. Below we will study how to make a snowmobile from a cultivator from improvised means.

Before making a snowmaker or snowmobile from the cultivator, it is necessary to prepare an approximate drawing in which it will be necessary to indicate the main structural elements, the method of their connection and the sequence of work. The whole structure will consist of two main nodes. The driven and the host. The driven part includes shock absorbers, steering column and runner.

Before starting work, it is necessary to decide what details you have in the finished form and which you need to make yourself. The further algorithm of work is as follows:

  • First we start creating a frame. To make a reliable snowman with your own hands, you need to try to connect the components of the frame as tightly as possible. Welding is suitable for this. Pipes will be the basis of the frame. As a rule, ordinary water pipes are taken for welding, but sometimes craftsmen use parts of motorcycle frames. In order to avoid gross errors, first the pipes are attached by means of point welding. After that, if the design has the correct shape, the pipes are connected by a continuous single seam;
  • Next, it is necessary to weld the brackets to the frame, which will hold the motor, runners, seats, steering column and other structural elements;
  • Further according to the plan. The manufacture of the ladies. As a snowmobile, one or two wide skis is suitable for them, which should be connected to the steering column through a hinge mechanism;
  • After that, shock absorbers must be installed. They can be taken in finished form from any motorcycle;
  • Next, install the motor and gearbox. They must be fixed on the leading part of the structure;
  • So that the snowmaker from a motor.Cultivator can move, it must be equipped with wheels or caterpillars. Wheel option will help make a more maneuverable unit. At the same time, if you want to avoid wheel slipping, you should choose caterpillars. This option will make the snowmobile more passable, but it will no longer be so maneuverable due to the high weight;
  • It is quite possible to make caterpillars for the unit yourself. To do this, you can use conveyor ribbons or chains from a motorcycle.
  • In any case, the main thing is that the design is quite reliable, durable and light;
  • If desired, the front part of the snowmobile can be equipped with a hitch for attaching a bucket. It will help quickly remove the large blocks of snow or scrape ice;
  • By connecting the caterpillars to the rest of the structure, it is necessary to test the machine.

DIY.Made snowmobile will be able to develop speed of 60–70 km./hour. Be sure to follow the safety rules when moving, since the relief of the site will constantly change, especially if you go to the forest.

See also  Can I cut a floor heating cable?

The best winter vehicle for our country is a snowmobile. Its distinctive feature is high patency and increased maneuverability. To this is also economical in fuel consumption. The modern market is filled with expensive brands of snowmobiles, so not everyone can purchase it. If you have a single tractor, your free time, the necessary tool and a little ingenuity can build a snowmobile yourself, we describe below how to remake a single tractor into a snowmobile.

The principle of operation of the device

The snow removal crashes into the thickness of the snow and cleans the road without much effort. In one minute it can process 12 m3. Mass emission speed 70 km/h. At such a speed, snow, thrown out of the disposal of the pipe, lies very far from the cleared road.

Starting to work, a novice inventor needs to solve several organizational issues:

It is easy to determine the engine. The main thing is to clearly understand for what purposes the uniform tractor is used. If the scale of its work is limited to a courtyard, cleaning the tracks from home to garage, then an electric engine is quite suitable.

But if the snowplower is planned to be used in all corners of the village, then you need to choose a gasoline engine.

To choose a snowpipe, you need to know what types of it exist and what are used for:

  • Snowmort-bulldozer. Works with the help of the front dump. Convenient in cleaning stuck and blinded snow.
  • Snowmobile-rover. Throws back the snow mass with blades (with the help of their work, the snow rises and falls into an inclined pipe, from which it flies out and scatters far from the cleaned area).
  • Schnek snowmobile.The snow is picked up with a screw and enters the hole of the pipe, from where it is thrown out.
  • Snowmobile permutal vehicle or airborne. It works on the principle of sucking of sticky snow and a quick release of it from the harvesting machine from the opposite side.

It is best to use a screw nozzle. The rotary mechanism copes well with a light snowball, and with a well.Compacted surface.

Minitors can also be used for snow cleaning. Read this article about this.

If you make a mini.Tractor yourself, then read about Belarusian minibrators.

How to remake one.Axle tractor into a snowmobile

Why exactly the same tractor? This is the most used unit, which is available in almost every owner of a personal plot. In winter, there is no need to use it for cultivation of land and caring for plants. Therefore, in winter, the engine from the walk.Behind tractor can be installed on a snowmobile, and in the spring it can be returned to a single tractor.

In the manufacture of a snowmobile, engines from medium-sized motoblods are usually used, with the presence of a rear traction-linked device and manual control. As an option, you can use the Neva one.Based tractor for the manufacture of a snowmobile. The cost of such an unit is average, and the installed engines are collected in Japan.

Forced air cooling is also installed on such engines, which is a plus for the manufacture of a snowmobile. The result of all works will be an excellent snowmobile, with a capacity of 6-7 liters.With. This will allow you to transport one or two people and a small cargo, we describe below how to remake a single tractor into a snowmobile in more detail.

To independently assemble a snowmobile, the following details are needed: an engine, a welding machine, a tube and some purchased spare parts. Several stages of the manufacture of a snowmobile from a walk.Behind tractor.

The design of the reduction of the walk.Behind tractor into a snowmobile

First, it is necessary to depict the design of the future machine in the form of a drawing. The analysis of manufactured homemade snowmobiles will help for this. The design itself will consist of two parts: the leading and leading. The driven part consists of shock absorbers, sleshes, steering column. For the manufacture of the leading part, you will need a frame, a drive and a power unit.

When a home.Made project is developed, the parts of the structure that are made independently should be determined in advance, and highlight those parts that must be purchased.

After creating the drawing, we proceed to the manufacture of the frame. To do this, it is advisable to use pipes. Sometimes conventional taps are used, but for greater strength, you need to use pipes from motorcycle frames. To give the desired shape to the frame, using a pipeline you need to bend the pipes. They are fixed by welding.

See also  How to remove a stator from a corner grinder. How to call the stator of the angular grinding machine

In order to avoid gross errors when assembling a snowmobile, the details of the frame must first be fixed with point welding. Having checked the correctness of the design, the joints are brewed with a unified uncharacteristic seam. After that, brackets are welded to the finished frame for installing the engine, runners, seats, steering column and other parts.

Snowmen

Powders are one or two wide skis, attached on a hinged connection to the steering column. Shock absorbers are the best solution in the manufacture of front suspension. For this purpose, lever shock absorbers that were used on motorcycles are best suited.

The engine and gearbox are installed on the leading part of the collected snowmobile. Here you need to solve in advance, to use caterpillars or wheelset for movement. Both types of drives contain both advantages and disadvantages.

The rear wheels installed at the snowmobile allows him to be more maneuverable, thanks to easy weight. But in order to avoid slipping of the wheels in loose snow, they must be equipped with chains. When using a caterpillar move, the cross.Country cross.Course increases, but its weight increases significantly, which reduces maneuverability.

Caterpillars for a snowmobile

Caterpillars for snowmobiles can also be made independently. In this case, various materials can be used: conveyor tapes, motorcycle chains, water pipes, etc. The main thing is to make them reliable, light and high.Quality, so that there is a good clutch of the paths with the surface.

Developed snowmobile speed 60-70 km/hour. But even at such a speed, the snowmobile remains a rather dangerous mode of transport. Since movement occurs in the snow, the surface of the movement will change repeatedly, even during a small trip. Particular danger appears during thoughtless driving in the forest at high speeds. Also, you should carefully move in open unknown spaces, after the fallen fresh “light snow”.

So that there are fewer problems when driving, you need to wear special clothes. The greater the speed of the snowmobile, the more demanding you need to be for clothes. Nowadays, boots and quilted jackets are no longer suitable. Clothing should be designed specifically for snowmobile driving. You also need to use a specialized helmet.

Neighbours Called Him Crazy, But He Had the Last Laugh

Another snowmobile from a motor block with your own hands briefly

We take the main components of the snowmobile.

Install the engine on the caterpillar engine.

We fasten 2 traction to the caterpillar engine that join the transverse beam with skis and the steering wheel.

remake, axle, tractor, snowmobile

4-5. Between the rods we install the front stand and the seat.

We fasten the caterpillar mover to a beam with controlled ski and the steering wheel.

We take bolts and pin and collect all the details of the future unit.

The uniqueness of the snowmobile consists in its ability to drive in those places where ordinary cars only dream of doing this.

Algorithm for execution in details algorithm

Before making a snowmaker or snowmobile from the cultivator, it is necessary to prepare an approximate drawing in which it will be necessary to indicate the main structural elements, the method of their connection and the sequence of work. The whole structure will consist of two main nodes. The driven and the host. The driven part includes shock absorbers, steering column and runner.

Before starting work, it is necessary to decide what details you have in the finished form and which you need to make yourself. The further algorithm of work is as follows:

  • First we start creating a frame. To make a reliable snowman with your own hands, you need to try to connect the components of the frame as tightly as possible. Welding is suitable for this. Pipes will be the basis of the frame. As a rule, ordinary water pipes are taken for welding, but sometimes craftsmen use parts of motorcycle frames. In order to avoid gross errors, first the pipes are attached by means of point welding. After that, if the design has the correct shape, the pipes are connected by a continuous single seam;
  • Next, it is necessary to weld the brackets to the frame, which will hold the motor, runners, seats, steering column and other structural elements;
  • Further according to the plan. The manufacture of the ladies. As a snowmobile, one or two wide skis is suitable for them, which should be connected to the steering column through a hinge mechanism;
  • After that, shock absorbers must be installed. They can be taken in finished form from any motorcycle;
  • Next, install the motor and gearbox. They must be fixed on the leading part of the structure;
  • So that the snowmaker from a motor.Cultivator can move, it must be equipped with wheels or caterpillars. Wheel option will help make a more maneuverable unit. At the same time, if you want to avoid wheel slipping, you should choose caterpillars. This option will make the snowmobile more passable, but it will no longer be so maneuverable due to the high weight;
  • It is quite possible to make caterpillars for the unit yourself. To do this, you can use conveyor ribbons or chains from a motorcycle.
  • In any case, the main thing is that the design is quite reliable, durable and light;
  • If desired, the front part of the snowmobile can be equipped with a hitch for attaching a bucket. It will help quickly remove the large blocks of snow or scrape ice;
  • By connecting the caterpillars to the rest of the structure, it is necessary to test the machine.
See also  Power supply for electric screwdriver 18v with your own hands

remake, axle, tractor, snowmobile
DIY.Made snowmobile will be able to develop speed of 60–70 km./hour. Be sure to follow the safety rules when moving, since the relief of the site will constantly change, especially if you go to the forest.

Snowmen

Powders are one or two wide skis, attached on a hinged connection to the steering column. Shock absorbers are the best solution in the manufacture of front suspension. For this purpose, lever shock absorbers that were used on motorcycles are best suited.

The engine and gearbox are installed on the leading part of the collected snowmobile. Here you need to solve in advance, to use caterpillars or wheelset for movement. Both types of drives contain both advantages and disadvantages.

OFF-ROAD | Трактор ХТЗ Т-150 Сломалось в Воде

The rear wheels installed at the snowmobile allows him to be more maneuverable, thanks to easy weight. But in order to avoid slipping of the wheels in loose snow, they must be equipped with chains. When using a caterpillar move, the cross.Country cross.Course increases, but its weight increases significantly, which reduces maneuverability.

Advantages of homemade snowmobiles

You can purchase a snowmobile in many stores, but, nevertheless, many continue to create such cars with their own hands. This is due to the fact that homemade machines have several advantages over finished products:

  • Low cost. It is because of the price that many refuse to buy ready-made models and create a snowmobile from the walk-behind tractor with their own hands. If we compare the cost of finished devices, it is worth noting that they can be 5-10 times more expensive than the assembled structure. To make a snowmobile from the walk.Behind tractor, it is enough to have a small amount of materials. In most cases, you do not even have to buy spare parts for the future design.
  • The possibility of choosing parameters. A homemade vehicle can have a different appearance, as well as power. Some structures created by craftsmen are more powerful than ready.Made popular snowmobiles. It is also worth noting that when creating your own car, you can choose the type of chassis.
  • Reliability of the design. Snowmobiles of even well.Known manufacturers often break during use. When creating his own all.Terrain vehicle, a person chooses only high.Quality materials. At the same time, the design made by your own hands is usually designed for heavy loads, while ready.Made models may not be intended for use in any conditions.

It is worth noting that when creating your snowmobile, you can use parts from other devices, which reduces the cost of the created unit. Homemade snowmobiles are used in almost any conditions, so many refuse to buy ready.Made designs. In the video you can observe the work of the structure, which is most often created from the walk.Behind tractor.

remake, axle, tractor, snowmobile

Discuss the article on the forum

| Denial of responsibility | Contacts |RSS