How to tuck the trimmer line into the grass trimmer? Tips for use

A fishing line is called a consumable, which consists of nylon, and serves as a cutting tool. This tool is used to cut the grass, which is achieved by rotating the head of the tool at high frequency. This material has different thickness, which depends on its use on the corresponding tools electric low-power (1 to 1.6 mm), electric from 500 watts (2-2.4 mm) and gasoline grass trimmers with brushcuts (2.4 to 3.2 mm).

The more powerful the tool, the thicker the cutting equipment should be. It affects not only the quality of grass mowing, but also the service life of the material. If you wonder how to rewind the grass trimmer spool, it’s time to change the tool. As spring arrives, this issue is becoming more and more in demand, so it’s time to figure out the step-by-step instructions for changing the line in the grass trimmer reel.

If there is a summer cottage or a large plot of land near your individual house or cottage, then you need to use a lawn mower for easy removal of grass and weeds. In case you’re thinking of choosing an electric lawnmower or a gasoline mower, then click here and you’ll find comparative characteristics of different models.

Over time, the line for the trimmer on the mower wears out and needs to be replaced. you can do it yourself. The polyethylene thread must be chosen according to the mower model. It is also worth taking a look at the other parts of the machine, here for example you can find information about Craftsman lawn mower blades that will also wear out and can lead to irreversible consequences.

The device of the spool, in which the line for the trimmer is inserted, is very simple. But it differs depending on whether the spool works with one or two tendrils of thread. It’s important to follow safety precautions when replacing the line in the spool.

Handle shape

There are two options for the handle:

The “T” shaped handle is installed on models with automatic line winding. Work is done with 2 hands on either side of the boom. This position is comfortable for trimming large areas of vegetation. The cut is made on the principle of the grass scythe. from one side to the other. Such a variant is not characterized by maneuverability, works poorly on difficult terrain. Bicycle handlebar can be equipped with control buttons. In domestic types of grass trimmers, the starting buttons are installed on the boom.

A classic grass trimmer model with a double-sided handle with control buttons

Gasoline trimmer with D-handle is more maneuverable, perfect for difficult terrain. With this type of tool, the hands are positioned one above the other. The disadvantage of the handle. it is difficult to hold, the operation of such a device is more complicated.

The handle in the form of an English letter “J” is the most uncomfortable, so it is rare.

Possible malfunctions

Gasoline grass trimmer is a technically complex device. Before the introduction should be very carefully read the instructions for use. But this is often a matter of neglect, because of which the product can quickly fail. As a result, it stalls, gets very hot and fails. Or just does not start because a person is not familiar with the rules of operation, and refuels it with bad gasoline.

A review of gasoline trimmer for grass Huter GGT 1900T look in the following.

How to pull the grass trimmer reel? Video instruction

Preliminary preparation

First of all, to wind the fishing line it is necessary to remove the spool (spool, spool) from the grass trimmer. Specific actions will depend on the complexity of the configuration and type of product itself:

  • Small electric grass trimmers with a working motor and spool position at the bottom usually have side keys on both sides of the carriage. When pressed at the same time, the top part of the spool, along with the internal contents for winding the mowing line, detaches, while the bottom part remains on the trimmer. It is advisable to disassemble the bobbin on a flat, level surface so that the spring that goes into the design does not pop up and get lost;
  • Electric and gasoline grass trimmers without blade attachment, as a rule, have spools with a special wing: in such designs you must hold the spool in one position with one hand and turn the fixing spool on the wing nut with the other counterclockwise. After loosening the nut, the entire bobbin is removed.
  • Electric and gasoline grass trimmers with the ability to install a straight blade (such as grass trimmers type) have a bobbin hole. To keep the movement of the rod stationary, a screwdriver or other suitable object is inserted into this hole, and with a slow rotation, this relative position is achieved when the screwdriver enters the hole and the coil is fixed. Then the spool body is rotated clockwise (left thread) and removed from the grass trimmer.

In the second and third cases, the coils are understood differently, depending on the design. In the lambskin spool, the lambskin is twisted, in the lambskin spools, the lambskin retainers are moved and one part of the spool is released from the other. If the halves of the spool are threaded, just turn them by hand in opposite directions until they are completely unscrewed.

I want to see? Rating of the best rattles!

We make a twisted line for a trimmer

Slowly completing the disassembly of the reel spool without losing its spare parts allows you to move on to the main task of. winding the mowing line on the spool. The technological features of the spool design and the number of active antennas determine the sequence of operations.

Coil with one working antenna

The simplest option and the simplest action:

  • The size of the bobbin and the length of the factory winding determine the recommended length of the bobbin for winding. 2. 5 ΠΌ.
  • One end of the mowing line is inserted into the installation opening on the inside of the spool.
  • The string is wound on the reel in the opposite direction of rotation of the spool in the direction of the three-dimensional product. there is usually an arrow on the inside of the spool indicating which side is winded.
  • A small part of the mowing line is left free for extraction. it is secured in a special groove on the inside of the spool designed to hold the winding when the spool is assembled.
  • The left end of the string is passed through the hole on the outside of the spool.
  • Half spools are assembled and put on the grass trimmer.

A spool with two working antennas

For this type of spool, determine the number of grooves for winding the mowing line lying on the inside of the spool:

In both cases a length of 2-3 m is taken.

In single-use fish cones, the hair is pulled into the through hole, its ends (tendrils) are bent and aligned, and then wound in the opposite direction of the reel rotation on the side of the rod. the correct winding direction is usually indicated inside the arrow.

With the locking grooves in place, the ends of the cutting element are lowered into them or held in place by free hand fingers, dropped into the through-hole of the outer half of the reel, the reel is closed, and the grass trimmer is attached to the bar.

The difference of twisting mowing line with two coils is that initially a piece of mowing line of 2-5 m length is folded in half (to determine the average bend), and the bend loop is inserted into a special groove between the grooves. The two antennae are each rolled into their own groove, securing the antennae and spool, similar to the single-row version discussed above.

  • Initially performing this procedure may seem laborious and time consuming, but with time and experience this task will be much quicker and easier.
  • The video below will clearly show you how to insert the wire into the grass trimmer spool and wrap it properly. this operation is not difficult and perhaps with some patience it will work:

Automatic cutting element coil

There are many reels where the automatic mechanism folds up independently. the user only needs to fill the line correctly for the trimmer.

The frame is passed through the hole on the inside of the body, its antennas without winding are passed through the hole on the outer body, the spool is assembled, and when the winding button is turned, the line for the trimmer inside is wound independently.

In such a reel, it is impossible to make the winding wrong: the mechanism itself will determine the correct direction, because it can only rotate in one direction.

How to properly change a trimmer line on a trimmer

The grass trimmer is a handy and easy-to-use tool for mowing grass and trimming small shrubs and trees. It often uses trimmer line (string, cord) as a cutting element because it’s cheaper and safer to use than circular blades. If the tool is used intensively, it will be necessary to change the trimmer line on the trimmer over time. The process is similar on mowers from different manufacturers, be it Husqvarna or Huter, with some minor differences.

Manufacturers offer 2 handle options:

T-handle is installed on models with auto-reeling line. The work is carried out by 2 hands, located on both sides of the boom. This position is ideal for cutting large areas of vegetation. The cut is made like a grass scythe. from one side to the other. Such a variant is not distinguished by maneuverability, does not work well on difficult terrain. Bicycle handlebar can be equipped with control buttons. In domestic types of grass trimmers, the starting buttons are installed on the boom.

Classic grass trimmer model with double-sided handle with control buttons

Gasoline trimmer with a D-shaped handle is more maneuverable, it is convenient to mow grass in areas with difficult terrain. This tool has one arm above the other. Disadvantage of the handle. it is difficult to hold it, the operation of such a device is more complicated.

Handle in the form of the English letter “J” is the most uncomfortable, so it is rare.

Automatic line winding on a spool

There are many spools in which the automatic mechanism winds itself from the user just needs to fill in the line correctly. The fishing line is passed through the hole on the inside of the body, its tendrils without winding through the hole on the outer body, the spool is assembled, and when you rotate the spool button, the line inside is wound independently. In such a spool it is impossible to make the winding wrong: the mechanism itself will determine the correct direction, because it can only return in one direction.

The drums of modern gasoline mowers, on 2 tendrils, have a special eye in each channel. The lug makes it possible to wind the trimmer line separately for each channel. For someone, this way of winding the line is preferable.

  • Remove the bobbin. To do this, it is better to lock it with a screwdriver or something like this. Unscrew the spool clockwise.
  • Remove the lid and take out the drum. Usually the cover is fixed a couple of latches. Disconnecting the reel gives you access to the spring. Do not lose it!
  • Preparing two separate lines of similar length.
  • Bend the end of the line with a hook.
  • Insert the hook through the eyelet.
  • Wind the line for the trimmer around one of the channels. Usually the line for the trimmer is wound against the rotation of the bobbin.
  • Fasten the end of the line so it does not unwind. Specially for this purpose on the perimeter of the very edge of the drum there are proper connectors.
  • Repeat the previous steps with the 2nd line. Wind it in the same direction as the first line.
  • Reassemble the spool and attach it to the brushcutter.

READ How to assemble the lawn mower starter correctly

Usually, such reels have both the usual hook on the center channel partition, and a separate eye in each channel. The user of lawn mowers with such a drum has a choice method of charging flax. Either way is good in its own way.

Below is a video, the creator of which clearly indicates the above method of filling the line. Showing an alternative method begins with the 8th minute exactly, the 1st part is devoted to the classic method of filament charging.

Review: Huter trimmer head. One of the serious drawbacks of Huter trimmers.

The Huter ETH-1200 semi-automatic trimmer head comes with a coiled 2mm thick, 5m long circular fishing line.Head weight 320 g.The head has a bobbin with a fishing line and two metal holes through which the ends of this line come out to cut the grass when the grass trimmer head rotates quickly.Designed for electric trimmers Huter Get-1200SL.

When you cut the grass, the line wears down and its length decreases.Consequently, the cutting radius is smaller.Restore the length of the ends of the fishing line can be a gentle knock on the ground button, located in the center of the head, with the grass trimmer head gaining momentum.

After that the two ends of the fishing line will be fed, the excess of which will be cut off as the trimmer blade rotates for grass.

Sooner or later a line either breaks one of its cutting ends at the root and you have to refill it, or a line for a trimmer runs out and you have to wind a new one.

In short, you have to take the cover off the head and pull the filament bobbin out of the body.Here’s where it gets interesting.A similar situation is described in Ivan Andreevich Krylov’s fable “the monkey and the glasses”:)

The thing is that the Huter trimmer head has a unique design.I haven’t seen it with any company.Opening it to reload the line is not for the faint of heart.

There was no description of how to do it.The inscription on the back of the head body in English “press to open” did not help.I pressed, tried to turn the body in both directions.Nothing worked.

Finally realized that my brains are not enough for the first non-destructive opening of it, resigned myself to it and started looking for knowledgeable people.Helped a cheerful and friendly saleswoman in my village store selling power tools and accessories. Antonina, who showed me how to do it. Thanks to her for that!

With the passage of time, of course, I forgot this unique experience.It was already inconvenient to go back to Antonina to bow.Had to use my brain, and subjectively and in detail understand the problem.The Internet suggested a way to uproot the grass trimmer head cap.What did not suit at all.

From the video I found, I understood the mechanism of the head.Turns out that the cover is held in place by four holders, fastened in the housing sockets and secured by a latch.Pressing it with an appropriate flat-blade screwdriver and turning the housing clockwise, you can easily remove the cover and pull out the bobbin with the remnants of fishing line.

Filling the line is standard and is described in detail in the description of the grass trimmer.Also not straightforward, but can be figured out.

When using the head for a long time, there is some soil, grass and dirt left over in it.To make the job better I cleaned the dirt from the housing and the outer parts of the head.

The head is easy to assemble.You must:- tuck the ends of the fishing line into the appropriate holes on the body:

In the photo you can see, among other things on the bobbin, slots for attaching a fishing line in sizes from 1.6 to 2.6mm. For Huter Get-1200S electric trimmers, a trimmer line with a diameter of 2 mm is recommended, which is firmly fixed in the line slots 2.4mm.

Next:. align the holders with the appropriate slots in the lid of the housing. by simply pushing on the back of the housing with the bobbin and line inserted. I have not yet crumbled. Turn the body counterclockwise.

Got great satisfaction after I finally managed to remove the head cap:)Feeling of victory over a recalcitrant and hostile to you Nature:)Like taming horses Clodt on Anichkov Bridge in St. Petersburg.

To buy or not such a head for trimmers?Only if there is a desire to fight with her when replacing the line.In addition, the weight of this head is 15g more than the weight of a similar head from Patriot trimmers.How important it is. I do not know.

The plastic is fine, I have not crumbled yet.But, people complain about its fragility. If you hit the ground carelessly it can crumble.

The thread in the head is actually the standard left-hand thread M10x1.25 LH.Accordingly, and the head for a line with a diameter of 2 mm can be applied to the standard with the same thread, for example, from the trimmer for grass Patriot.

There are plenty of offers at different from different manufacturers on the market.From the most democratic to completely prohibitive for automatic heads.You can choose the most suitable one for you.

| Denial of responsibility | Contacts |RSS