How to twist a screw without an electric screwdriver?

Instead of a knife, you can use the CD for the screw, you can twist it much, you can unscrew your nail with a plastic bank card, a coin, or a metal ruler, a canvas from a hacksaw for metal and. T. D. If a screw for a cross screw, then on the contrary you need a knife with a sharp end.

Another option is to use a toothbrush. Melt one end of it with a lighter, then immediately insert it into the recess on the screw’s head. After waiting for the molten plastic froze, turn the brush counterclockwise. Of course this will not help if the screw is twisted too much.

Device and assignment of power tools

Today screwdrivers produce different firms. The most popular brands include Metabo (Metabo), Bosch, Dewalt, Interskol. Such devices can be used in various fields of activity. At home, in construction, and assembly of furniture. The device helps to drill, tighten or unscrew the mounts, perform the thread.

All devices include the following elements:

Answering the question of how an electric screwdriver works, you need to familiarize yourself with its elements. Inside the device are an electric engine, clutch, gearbox. The tool also includes the capacitor and the board.

How to twist a stuck screw

Our experienced team of editors and researchers who checked it for accuracy and completeness participated in the creation of this article.

Wikihow content managers team carefully monitors the work of editors to guarantee compliance with each article with our high quality standards.

The number of views of this article: 197 313.

Xiaomi Wowstick Electric Screwdriver. Disassembly

If the screwdriver constantly slides in the screw hat, you need to create additional friction between it and the hat or attach a greater power of torque. There are quite a lot of simple ways to extract screws with the help of improvised business materials. Of course, you need special tools for tightly stained screws, but they are not so expensive and is always on sale.

  • If the screw is screwed into the metal, apply an impregnation on it and leave for at least 15 minutes. [1] X Source of Information
  • Take the largest screwdriver that approaches your screw.
  • If possible, grab the handle of the screwdriver with a wrench to use the additional strength of the lever.
  • Wide cut elastic band (to get a strip of rubber);
  • A piece of steel cotton wool;
  • A piece of a green abrasive kitchen sponge;
  • Adhesive tape (adhesive side to a screw hat).

Shift slightly along the screwdriver so that it rises correctly in the grooves. Carefully hit the screwdriver so as not to accidentally break the screw hat. If you work with a fragile item, miss this step.

  • If the screwdriver slides again in the hat, stop immediately. Further scrolling of the screwdriver in the hat will only deform it and complicate the process of extracting the screw. Be sure to check that by extracting a screw, you rotate it in the right direction. Usually (but not always) to twist the screw, it should be twisted counterclockwise (we twist it to the left, and we tighten it to the right). Strong pressure on the screwdriver itself allows you to prevent it from slipping in a hat.

Using a hacksaw, cut a groove for a flat screwdriver in a screw hat. If you have not been able to move the screw from the place, cut the groove in his hat. Then insert a flat screwdriver into the groove and try to unscrew the screw. [3] X Source of information, this step can be combined with any of the above steps.

  • It is also not recommended to use an electric shock screwdriver, since its excessive force can lead to damage to the surface into which the screw is screwed.

Set up a screwdriver to unscrew the screws. In some models of screwdrivers there is a switch. In other models, the direction of rotation is set by the rotation of the screwdriver handle.

Knock on a screwdriver with a kiyanka. Knock the screwdriver with a heavy clay on the handle of the screwdriver. Rubber evaporates will avoid the appearance of scratches on the screwdriver handle.

Check the direction of rotation of the screwdriver. Some shock screwdrivers drop rotation settings after each blow. [6] X Source of information If the setting is dropped, return it back to the position for unscrewing.

Repeat the procedure until the screw yields. As soon as the screw begins to get out, go to the usual screwdriver and unscrew it from the hole.

How to twist a stuck screw

Our experienced team of editors and researchers who checked it for accuracy and completeness participated in the creation of this article.

Wikihow content managers team carefully monitors the work of editors to guarantee compliance with each article with our high quality standards.

unscrew, screws, electric, screwdriver

The number of views of this article: 197 313.

If the screwdriver constantly slides in the screw hat, you need to create additional friction between it and the hat or attach a greater power of torque. There are quite a lot of simple ways to extract screws with the help of improvised business materials. Of course, you need special tools for tightly stained screws, but they are not so expensive and is always on sale.

  • If the screw is screwed into the metal, apply an impregnation on it and leave for at least 15 minutes. [1] X Source of Information
  • Take the largest screwdriver that approaches your screw.
  • If possible, grab the handle of the screwdriver with a wrench to use the additional strength of the lever.
  • Wide cut elastic band (to get a strip of rubber);
  • A piece of steel cotton wool;
  • A piece of a green abrasive kitchen sponge;
  • Adhesive tape (adhesive side to a screw hat).

Shift slightly along the screwdriver so that it rises correctly in the grooves. Carefully hit the screwdriver so as not to accidentally break the screw hat. If you work with a fragile item, miss this step.

  • If the screwdriver slides again in the hat, stop immediately. Further scrolling of the screwdriver in the hat will only deform it and complicate the process of extracting the screw. Be sure to check that by extracting a screw, you rotate it in the right direction. Usually (but not always) to twist the screw, it should be twisted counterclockwise (we twist it to the left, and we tighten it to the right). Strong pressure on the screwdriver itself allows you to prevent it from slipping in a hat.

Using a hacksaw, cut a groove for a flat screwdriver in a screw hat. If you have not been able to move the screw from the place, cut the groove in his hat. Then insert a flat screwdriver into the groove and try to unscrew the screw. [3] X Source of information, this step can be combined with any of the above steps.

  • It is also not recommended to use an electric shock screwdriver, since its excessive force can lead to damage to the surface into which the screw is screwed.

Set up a screwdriver to unscrew the screws. In some models of screwdrivers there is a switch. In other models, the direction of rotation is set by the rotation of the screwdriver handle.

Knock on a screwdriver with a kiyanka. Knock the screwdriver with a heavy clay on the handle of the screwdriver. Rubber evaporates will avoid the appearance of scratches on the screwdriver handle.

Check the direction of rotation of the screwdriver. Some shock screwdrivers drop rotation settings after each blow. [6] X Source of information If the setting is dropped, return it back to the position for unscrewing.

Repeat the procedure until the screw yields. As soon as the screw begins to get out, go to the usual screwdriver and unscrew it from the hole.

How to unscrew the Torx?

If the external (external) will need a hammer, they will slightly approach the bolt, but without fanaticism. Penetrating fluid VD-40, it will facilitate the unscrewing of the bolt. And these are plumbing ticks, if not the end of the bolt of the nut, then we hold the head with the same ticks, and we unscrew the nut with rock keys of the desired size.

If the hexagon is small, then you can score the Torx suitable size star and unscrew for it. If the head is available, then you should try to twist the screw with pliers, a gas key or hand.Made teaks. In the presence of a place, a hammer and a chisel almost always helps.

When the hat is missing

A broken hat is also a fairly common phenomenon

The main causes are still poor-quality material or excessive effort when twisting.

New Slitz is made using a triangular file file

In this situation, you can try to unscrew the remains of the screw with pliers. If this does not work out (for example, most of the thread is in a tree), you can make a new slot.

Next, the screw is twisted using a conventional screwdriver

How to twist a screw with a broken hat

Useful tips

When repairs of any item, it has to be disassembled. In some situations, it is quite difficult to do it. The cause is screws with damaged faces or broken hats. In these cases, it is necessary to invent individual ways of combating insidious fasteners. However, there are general recommendations that may be useful to beginner.

The most common “trouble” are screws with damaged faces. To twist them with a regular screwdriver or an electric screwdriver will not work. The easiest way to apply a strong glue on his hat, fixing a nut or another suitable item them. Glue should be used only especially durable, for example, epoxy resin or “cold welding”. This method is suitable only in those places where a lot of effort is not required to turn the screw.

It is much easier to work if a hat or broken self.Tapping screw rises slightly above the surface. The screw or body of the screw can be cut slightly by creating one deep slot. Do it with an ordinary hacksaw for metal. In difficult places, an engraver with a cutting disc is required. Having made a cut, the metiz is carefully turned out with a screwdriver.

If the described method is not suitable, the broken screw is trying to extract with plugs or a small gas key. The protruding part of the broken fasteners is clamped and slowly rotated counterclockwise, until completely removed.

Much worse if the screw is drowned into the surface of the part. In this case, they resort to radical measures. They are partially removing the material in the area of ​​the metiz. The tree is removed with a chisel, and the metal is polished with a corner grinder or engraver. Having freed the screw for the required length, it is twisted with pliers.

When working with metal details, broken screws are sometimes intensively heated by a gas burner or a building hairdryer. The fasteners are greatly expanding. When cooling, a small space forms between it and the part, which sometimes helps to unscrew the methysis with pliers. In the compounds of wooden parts, the screws are heated with a powerful soldering iron. The tree around it drys out a little or charred, which noticeably facilitates the removal of fasteners.

Well, if all these methods have already been tried and did not help, the broken screw is removed using an electric drill. To do this, select a drill of suitable diameter and carefully drilled the metiz for the entire length. This method is suitable for both metal and wood.

unscrew, screws, electric, screwdriver

All about self-tapping screws for woody stove

Self-tapping screws for woody stove are used not only in furniture production, but also during the repair of residential and household premises. Plywood sheets are widely used in creating various partitions and designs. For their proper fastening, the appropriate metizes should be used to help create a strong connection.

Peculiarities

Self-tapping screws for woody stove are special metered products that are used to connect wood products. Furniture screws create a solid threaded connection that does not destroy the boots wood-bearing plate and wood.

Self-tapping screws of this type are used in assembling furniture products from different types of wood-based plates:

They are also used when fastening thin drywall. Such screws are made from durable metal alloys. They have the following design:

  • A head that provides a torque;
  • Slitz. Deepening in the end part of the head;
  • A massive thread protruding on a metal rod, which in the lower part has a conical shape and pickle;
  • Sharp tip, which quickly enters the structure of the woody plate.

The special design of the methyse, in which there is a large threaded and rod surface, allows you to reduce the load at the junction, which increases the strength of a furniture or other design collected from the wood-based slab of the plates. For the manufacture of such screws, high.Strength carbon steel is used, which provides durability and strength to such a metiz. To protect against moisture effects, the finished screw is covered with a special anti.Corrosion composition consisting of zinc, brass and nickel.

The use of such devices will extend the period of use of the product or design assembled from wood-based stove.

The special design of the methysis is tightly connected to the material due to the same diameter of the smooth part of its rod. With unsuccessful screwing the screw into the wood-bearing plate, it can be quickly unscrewed, inflicting the minimum damage.

Two types of such screws are known:

They can have different sizes. For assembling furniture made of wood-bearing plate, screws with a diameter of 1.6 to 10 mm are usually used. The length of one unit can vary from 13 to 120 mm. For a thin woody stove, most often metizes of 16 mm long are used. Ordinary screws have a cylinder.Shaped rod and a head of different shapes:

Models with a secret head are used when fastening handles, loops, guides for drawers. The screw is completely buried in the material. Metiza with a half.Hearted head is used when creating the fasteners completely hidden in the material. Thanks to the smooth transition from the rod to the threaded surface, when twisting, such a head is completely immersed in the material.

Metizs with a semicircular head are used in cases where it is necessary to create a compound of increased strength and exclude the possibility of deformation of the created structure made of wood-based stove. The universal screw may have slots simple or cross.Shaped. The use of products with cruciate slots gives a number of advantages in the work:

  • When working, a drill or screwdriver is firmly installed in the head the first time;
  • When twisting, you can only work with one screwdriver;
  • Such screws are easily installed in hard-to-reach places of wood-piece stove products.

Confirmates are called euro-shurups, which today are most often used in furniture production. These are reliable and inexpensive furniture metizes that allow you to create strong compounds that are resistant to strong mechanical influences, including. They can also be used instead of corners when assembling cabinet furniture. To hide the screw after twisting it, the head is closed with a special plastic plug.

How to choose?

When choosing a suitable type of screwdriver, you should pay attention to the type of wood-brown plate or other material in which such a screw will be screwed up. It is necessary to take into account the type of head and drawing on it to select a tool for screwing. It is also important to pay attention to the length of the screw and the diameter of the rod, correlating their dimensions with the data data. With the correct selection of the metiz, it is possible to create not only a strong, but also an inconspicuous connection. To choose high-quality screws for the woody stove, you should be guided by the following rules:

  • Buy metizes of one color scheme to be sure that they have passed the same anti.Corrosion treatment;
  • Pay attention to the labeling of fasteners, in which the diameter of the thread is the first number, and the second is the length of the screw;
  • Select dentizers with a deep hole on the head to simplify working with them when twisting and tightening.

Compliance with these rules will create strong fasteners in a furniture or other structure made of wood-based plate or other plate made of crushed wood.

Screwed

Screws with a flat/hemispherical head (or rather, slots) often break down, and there may be several reasons:

  • The use of an old, poor.Quality or inappropriate tool;
  • Incorrect screwing (with a hammer, for example);
  • Insufficient effort when unscrewing/twisting and, as a result, jumping out a screwdriver from a slot;
  • “Acidification” of a screw (corrosion);
  • The incorrect use of the metride (without sparkling, it is necessary for the claw, or for the inappropriate material).

Method no1. Twisting

Carefully inspect the screwdriver with which you twist the screw, and if necessary, change it to a more suitable. It is important that the sting is tightly included in the groove and is not damaged. If the replacement of the screwdriver did not help, you can use other methods. If you need, for example, to twist a screw from a wooden product, then hit the head, and then tap on the tool at each effort application. You can also use pliers, if possible, what we have already mentioned above. Or you can use elastic bands.

On a note! So that the self.Tapping screw starts to scroll, use a few drops of lubricating or brake fluid, kerosene. Another screw can be heated so that it expands. This is how the material surrounding it will be deformed, and the product can be twisted.

unscrew, screws, electric, screwdriver

If nothing helps, you can take radical measures.

Method no3. Extractors

Another good way to unscrew the screw. Pick up the drill so that its diameter is less than that of the threaded part of the methyse, make a recess in the head, cut the left thread there and unscrew the screws using conical extractors. This is suitable for all types of heads, but in the case of self.Tapping screws you will have to choose another method. They are produced hardened.

What conclusions can be drawn? If you need to unscrew the screw with torn faces, then the easiest way to do this is by welding (or gluing, if the effort is not too large) nut or some kind of stop to the remaining part of the methysis, heating and performing the cut.

Electric Screwdriver / Power Screw Driver. How To Use

| Denial of responsibility | Contacts |RSS