Review: trimmer for grass gasoline (lawn mower) Huter GGT-2500T. A very powerful device, I, of course, is glad to him

A Chinese.made lawn mower, which I used for 5 years, became unusable: the engine jammed. I decided to buy a new one, because I didn’t see any sense in the repair. So, having bought the second benzotrimer, there is something to compare with.

Before buying, I collected information on the Internet. At first I wanted to buy an electric trimmer for the grass, but most of them are low.power, and people complain: either they often break, then the bar is short and you have to mow on the vnacolon. Therefore, I decided to still dwell on a gasoline spit.

One Internet specialist said that all the power indicators that are written in the operating manuals of Chinese gas is an empty phrase. You only need to focus on the volume of the engine. If it is more than 40 cubic meters. cm, a braid for grass will cope with grass without problems. With this thought, I went to the store.

The choice was huge, but for the money at that time I was constrained, so there were only 8 thousand in my Having examined motorcycles within 7 thousand, I stopped on the Huter GGT-2500T benzotrimer model. Outwardly the unit made the impression of a good machine, powerful and productive.

Asked the seller to operate. He dumbfounded me with his answer: “It is in the box, and the boxes are in the warehouse. Yes, all this information on the Internet is. You can see at home “. I began to slowly pour anger: “That is, you are now inviting me to go home, sit down for a computer and find the technical characteristics of this trimmer for grass on the Internet?!»The seller, seeing my condition, went back:“ What specific parameters are you interested in?”I replied:” Only engine volume “.

The seller left for the computer and literally anticipated a minute later: “51 cubes”. I did not need anything else. Said that I take. The seller began to take off the braid from the rack, pushed and recommended that I immediately buy another head so that there were no problems with a regular one. I asked what problems. It turned out that the body of the standard head is made of low.quality plastic, which is cooked.

I remembered the old braid. Indeed, that was what it was. For the second season, pieces of plastic began to bounce off the body. There was another head that differs even in appearance, but I decided to work first until the end. It is possible that this ruined the braid. At the first hayfield, another piece of plastic flew off this season, and the head figured it out right in the process of work. The lid, coil, fishing line for a trimmer, washers flew Okay, not in the head, the casing protected.

I drowned a trimmer for the grass, put another beautiful head, started. The engine worked for 5 seconds and stalled. It seemed strange to me. Stall “on hot”? This was not there, if the gasoline did not end, but then it was still half a bacon. I tried to get a braid again, but the starter cord did not get out.

huter, lawn, mower, gasoline, pour

The next day I took off the starter, confident that the matter is in it, but not. The starter worked separately like the Swiss watches. The mood deteriorated. I realized that the engine was jammed. I tried to spin the crankshaft. it doesn’t go.

Perhaps just a coincidence, and perhaps the scattered reel somehow influenced the malfunction of the engine.

TruFuel. Ready to go gas

So I got a new Huter GGT-2500T benzotrimmer. In a special room, the seller checked his work. I asked to hold on to the handle. There is vibration, like all Chinese motorcycles, but within the norm. And for the Old 2 years, the vibration has become such that three knitted gloves had to be worn, otherwise the hands fell off. I already began to look for the cause of vibration (cold gearbox, the bar, too, means the matter is in the motor), but then the engine jammed.

While the seller was packing the braid, I went to the checkout. Trimmer for the grass along with a new head cost me 8300, so along the way I had to fumble a trifle along my s. I barely scrape. But the cashier made me a discount, and I paid only 7500. After a couple of days he decided to slowly collect a trimmer for the grass. After the store in my hands, I had 2 parts: a box of dense cardboard with a engine and all causals.

And the bar. By the way, she, unlike the old braid, is indifferent. I think it’s a plus. Firstly, it is tougher, and secondly, the fewer the compounds, the lower the risk of breakdown.

I took out the most severe part of the lawn mower with the engine and control handle from the box, on which the red tooth-turning switches of the ignition and the yellow gas key are located. There is also a button-stop that fixes the key in the “full gas” position so that the finger does not get tired of constantly holding the key pressed. Looking ahead, I will say that this button turned out to be motionless. This is not fundamentally for me. I’m not 8 hours every day, but 3 times per season and only on my site. The picture is clearly visible white gas tank below with a cork and a starter with the inscription Huter.

This is what the engine from the clutch looks like. Here I fasten the bar.

And here is the new head, which I immediately fastened to the gearbox, while the bar is separate.

Then he began to consider causals. The operating manual says that a trimmer for grass is equipped with a shoulder belt. But in fact, he turned out to be a resident. The old braid for the grass “harvest” was the same, and she was pretty tired of me. The belts were constantly weakened, unleashed, cut the body, the carbine unfastened with difficulty. But this “harness” was better. The belts turned out to be wider, after adjustment they did not stretch, but I still sewed them immediately, fixing in one position. The first belt was very tough, even with a thimble I had to tinker, piercing it with a needle. But the rest turned out to be surprisingly soft, so the work did the work quickly. The carbine turned out to be more than the old, it is easily unfastened.

Specifications

Before making a choice in the direction of a particular model of equipment, you must familiarize yourself with its technical characteristics. The Huter GGT 2500S model is no exception, the operating instructions of which are presented below. This unit is a device whose power reaches 3.3 liters. With., or 2.5 kW.

As a cutting tool, a knife or fishing line for a trimmer is used (by choice). The design has a bicycle handle and a hard drive shaft. Speasing width is 25.5 cm. When consumers consider this Huter lawn mower, they pay special attention to the spindle rotation frequency. In this case, it is 9500 per minute. The landing diameter is 25.4 mm. You may also be interested in the level of noise, which is 96 dB. Weighs the unit 7 kg. The thickness of the used fishing line is 2.4 mm.

How to refuel a trimmer for grass

The finished mixture of gasoline with butter can be stored for no more than 3 months (clean gasoline is stored less). Dilute the fuel in the quantity that is enough for several applications of the trimmer for the grass. In general, prepare:

  • gasoline and oil, which is suitable for two.stroke engines with an air cooling system;
  • metal canister and a mixture container;
  • respirator;
  • gloves.
  • Pour 1 l of gasoline into a suitable volume of 1 l of gasoline and add 1/2 of the desired amount of oil.
  • Mix carefully, being at a decent distance from the sources of open fire.
  • Add the rest of the oil to combustible and mix everything again.

Reel vs Rotary Lawn Mowers // Pros and Cons, Cut Quality, How To Mow Low

General recommendations for refueling a trimmer for grass with a two-or four-stroke engine:

  • Place the fuel tank so that the cover is located on top, and then pour the required amount of fuel.
  • Do not overfill the fuel tank. This will lead to one of the problems: transferring into the intake pipe and fuel filter, flammable ignition or breakdown of the motor.
  • Try to fill the mixture so that it does not spill. To do this, you can use the watering can.
  • If you still poured fuel, then immediately wipe it. Put the wiping material, do not accumulate indoors. this is fire hazardous.
  • The launch of the device should begin after the canister with fuel is removed at a distance of more than 10 m.
  • If there was a long break between the operations of the mowing, then the remaining old fuel be sure to drain.

What gasoline to pour in the Husqvarna lawn mower

What gasoline to pour into a lawn mower? This question often arises in the newly made owners of this technique. As a rule, this information is presented in the technical documentation of the apparatus, but it is worth knowing about possible options.

What gasoline to pour in the lawn mower depends on the type of engine. It can be two- or four-stroke. Consider the features of both motors.

To prepare fuel for a two.stroke engine, you need to mix gasoline and special engine oil in strictly defined proportions. You can purchase it without problems in any auto parts store or garden equipment.

The process of making fuel is quite simple: as a rule, for mineral oils, the ratio with gasoline is 1:32. 1:35, for synthetic. 1:50, as indicated on the package.

To provide a gasoline lawn mower fuel for the whole season, it is enough to bring it once. To do this, take, for example, a five.liter canister and share 100 ml of oil into it. If you do not have enough this amount, repeat the procedure again.

What gasoline to pour into a lawn mower with a four.stroke engine?

Now let’s tell you what gasoline to pour in a lawn mower with a four.stroke engine, the main difference of which is the presence of a crankcase. It contains oil for lubrication of the motor, therefore, in order for the device of this type to function normally, it is enough to season it only with gasoline. However, there are its own characteristics. Since the technique does not have an oil filter, which means it is not cleaned, it must be changed approximately every 50 hours of operation.

As for gasoline, who need to refill the lawn mower, it should not be a higher brand than recommended by the manufacturer of equipment. Since the higher the octane number, the longer the fuel burns. And this, in turn, can lead to significant problems and premature breakdown of the tool.

Everyone knows well that gasoline is a very easily inflammable substance, and its pairs are explosive. Based on this, we recommend always observing several simple rules that will ensure security for each user:

  • Before refueling, you need to let the engine cool down.
  • Pour only 92nd gasoline (not lower);
  • You can not work with fuel if there is open fire nearby, it is also forbidden to smoke.
  • To avoid poisoning with exhaust gases, pour fuel and launch in the open air or indoors with good ventilation.
  • It is not recommended to refuel the tank completely, it is necessary to leave a place to “expand” gasoline, which always occurs when it is heated.
  • Try to so that fuel does not fall on your clothes and shoes.

Husqvarna lawn mower. a worthy tool for the care of the lawn

Suburban possessions are presented in a wide range. Husqvarna lawn mower relates to the best models at an affordable cost. The highest quality of products in at least any price category is a distinctive feature of Husqvarna, which is a world favorite in the production of tools with diesel and electronic thrust.

For two.stroke engines

Most trimmers have a two.stroke engine, which, although it has the simplest device, still requires close attention when servicing. To refuel two.stroke engines, a mixture of gasoline and oil is used in a certain proportion. It is this ratio that plays a decisive role. It must be clarified when buying a trimmer for grass. As for the oil, almost any lubricant with a mark of 2t is suitable. Of course, manufacturers of an expensive tool require the use of combustible materials for the installed specification, but for most trimmers such oils as Mobil 2T, Liqui Moly Motorrad 2T or Castrol Power1 Racing are suitable. Average portion of oil additives. about 20 g per 1 liter, however, over time, the amount of lubrication can be determined experimentally by the presence of soot on the candle and the degree of pollution of the carburetor.

Four.stroke engines have a separate oil filling container. Such power units are more sensitive to oil quality than two.stroke, although there should not be special problems with the service of trimmers with a four.stroke engine. For inexpensive trimmers, the Mannol Quad or Zic 4T oil line is well suited. Trimmers who have been on operation for more than three years are recommended to fill in oil with cleaning and restoring additives. In this case, you can use the XADO Atomic Oil 4T oil containing a whole complex of additives and is characterized by increased viscosity. 10W60. In most cases, semicinteic oils of medium viscosity 10W40 from the middle price category are suitable for trimmers.

Is the oil replacement is required?

If the trimmer for the grass does not experience extreme loads when operating, the service life of the oil is approximately comparable to the service life of the engine itself. Often, only control over the level and timely oil is used is required. However, the state of lubrication in the engine must be controlled from time to time for blaspheming, the presence of suspension and other signs of aging. In these cases, it is recommended to replace the oil completely.

The authors answered correctly that there is a big difference in the gasoline brand for two.strokes and a clear.haired. I do not take into account the ethletrimmers. In them, by definition, lubricants are used only for moving parts of the drive.

Without entering “because of the stove” I can say from my own experience that for two-strokes gasoline should be an actane number for less than four-strokes. There was experience in operating a four-stroke trimmer for Makita grass on 92th gasoline. The owner of the trimmer for the grass again used it on the 92nd, although the manufacturer was recommended by gasoline from 95 and above. However, he used all other operational fluids in strict accordance with the instructions (oil for the engine crankcase (for crank)) tried to mow on it at one time, and this is what I understood. Result. The traction is not to the line, much lower than the declared by the manufacturer, as a result of more revolutions and heating, too, gasoline does not burn completely, the carpet in the muffler is constantly growing. Taking him home to drive, tucked 95th gasoline, and the car went. does not heat up, wherever you are with good, exhaust as in gas. does not even smell and not be visible, you can put your hand on the cylinder and not burn yourself. Conclusion. For four.stroke trimmers, at least 95 gasoline is better.

For two.strokes. There is just the opposite. In what proportions do not divide 95 gasoline with oil, the additives present in it (and in the definition of the “clean” 95th gasoline there is no at all. This is the same 92 package of additives), it will not work to neutralize oil and therefore the detonating component cannot be excluded. In addition, the two-stroke, which practices each cycle of the piston to ignite the working mixture, heats up on high-octane gasoline much stronger, as if the combustion temperature is higher. Which leads to an increase in the natural expansion of metals, well, it is completely logical to a decrease in the gap in mating details (piston group, clips and balls of bearings, etc.P.) The four-stroke “practices” every second beat in working mode (ignition of the working mixture) according to the principle of operation of the cooling system, we can also say that the 92nd gasoline is more recommended for two-strokes having an air cooling system.

Oil proportions for any of the type of motors first of all need to look in the product passport. Well, of course, it is clearly aware that the oil is poured into the four.strokes only into the engine crankcase, and for the two.stroke, a working mixture is prepared from parts of gasoline and part of the oil. Proportions for oil and gasoline for each of the models of trimmers need to be watched (first of all!) in the passport of the product. I can only cite guaranteed oil and gasoline proportions for two.stroke engines of STIHL and Huter trimmers. Both during the period of the running-in and during operation, when using our (gasoline, dilute 25 milligrams of oil for each liter of 92nd gasoline. The proportion of 40/1 on these proportions has been working on the 180th STIHL and a trimmer for Huter grass for more than three years. The flight is normal. Proportions Tawful to STIHL manufacturers. 50/1 This is not for our gasoline, but for the European brand 87-90, which from the distiller comes out, without the addition of anti-depth and eco adds.

Two-stroke engines operate on a gasoline mixture. The main reason for the malfunction is the incorrect compilation of the fuel mixture or the complete absence of oil in gasoline. When preparing the fuel mixture, special oil for two.stroke engines with marking “for garden equipment” is used. Do not use boat matches, motorcycles, etc. The ratio of the mixture of gasoline/oil may vary depending on the engine model, marking oil and the recommendations of the manufacturer of the gas instrument. For two.stroke engines, a mixture ratio 50: 1, 32: 1 and 24: 1 is used.

What gasoline to pour into a trimmer for Huter grass

A Chinese.made lawn mower, which I used for 5 years, became unusable: the engine jammed. I decided to buy a new one, because I didn’t see any sense in the repair. So, having bought the second benzotrimer, there is something to compare with.

Before buying, I collected information on the Internet. At first I wanted to buy an electric trimmer for the grass, but most of them are low.power, and people complain: either they often break, then the bar is short and you have to mow on the vnacolon. Therefore, I decided to still dwell on a gasoline spit.

One Internet specialist said that all the power indicators that are written in the operating manuals of Chinese gas is an empty phrase. You only need to focus on the volume of the engine. If it is more than 40 cubic meters. cm, a braid for grass will cope with grass without problems. With this thought, I went to the store.

The choice was huge, but for the money at that time I was constrained, so there were only 8 thousand in my Having examined motorcycles within 7 thousand, I stopped on the Huter GGT-2500T benzotrimer model. Outwardly the unit made the impression of a good machine, powerful and productive.

Asked the seller to operate. He dumbfounded me with his answer: “It is in the box, and the boxes are in the warehouse. Yes, all this information on the Internet is. You can see at home “. I began to slowly pour anger: “That is, you are now inviting me to go home, sit down for a computer and find the technical characteristics of this trimmer for grass on the Internet?!»The seller, seeing my condition, went back:“ What specific parameters are you interested in?”I replied:” Only engine volume “.

The seller left for the computer and literally anticipated a minute later: “51 cubes”. I did not need anything else. Said that I take. The seller began to take off the braid from the rack, pushed and recommended that I immediately buy another head so that there were no problems with a regular one. I asked what problems. It turned out that the body of the standard head is made of low.quality plastic, which is cooked.

I remembered the old braid. Indeed, that was what it was. For the second season, pieces of plastic began to bounce off the body. There was another head that differs even in appearance, but I decided to work first until the end. It is possible that this ruined the braid. At the first hayfield, another piece of plastic flew off this season, and the head figured it out right in the process of work. The lid, coil, fishing line for a trimmer, washers flew Okay, not in the head, the casing protected.

I drowned a trimmer for the grass, put another beautiful head, started. The engine worked for 5 seconds and stalled. It seemed strange to me. Stall “on hot”? This was not there, if the gasoline did not end, but then it was still half a bacon. I tried to get a braid again, but the starter cord did not get out.

The next day I took off the starter, confident that the matter is in it, but not. The starter worked separately like the Swiss watches. The mood deteriorated. I realized that the engine was jammed. I tried to spin the crankshaft. it doesn’t go.

Perhaps just a coincidence, and perhaps the scattered reel somehow influenced the malfunction of the engine.

So I got a new Huter GGT-2500T benzotrimmer. In a special room, the seller checked his work. I asked to hold on to the handle. There is vibration, like all Chinese motorcycles, but within the norm. And for the Old 2 years, the vibration has become such that three knitted gloves had to be worn, otherwise the hands fell off. I already began to look for the cause of vibration (cold gearbox, the bar, too, means the matter is in the motor), but then the engine jammed.

While the seller was packing the braid, I went to the checkout. Trimmer for the grass along with a new head cost me 8300, so along the way I had to fumble a trifle along my s. I barely scrape. But the cashier made me a discount, and I paid only 7500. After a couple of days he decided to slowly collect a trimmer for the grass. After the store in my hands, I had 2 parts: a box of dense cardboard with a engine and all causals.

And the bar. By the way, she, unlike the old braid, is indifferent. I think it’s a plus. Firstly, it is tougher, and secondly, the fewer the compounds, the lower the risk of breakdown.

I took out the most severe part of the lawn mower with the engine and control handle from the box, on which the red tooth-turning switches of the ignition and the yellow gas key are located. There is also a button-stop that fixes the key in the “full gas” position so that the finger does not get tired of constantly holding the key pressed. Looking ahead, I will say that this button turned out to be motionless. This is not fundamentally for me. I’m not 8 hours every day, but 3 times per season and only on my site. The picture is clearly visible white gas tank below with a cork and a starter with the inscription Huter.

What gasoline to fill in a trimmer for grass. What gasoline can be poured into a trimmer for grass?

Before finding what gasoline can be poured into a trimmer for grass, you need to determine some concepts used.

  • Trammers for grass can be with four.stroke or two.stroke engines. Four.stroke trimmers for grass are more massive and complex in design, lubrication of the details of its motor is carried out due to the oil pump. The engine works on clean gasoline. For two.stroke units. more ordinary. it is required to make a fuel consistency consisting of gasoline and oil. Here is due to the amount of oil that is in combustible, and the rubbing parts in the cylinder of this motor are lubricated.
  • For the manufacture of consistency, gasoline of a certain AI-95 or AI-92 brand is needed. The brand of gasoline is located depending on its ignition rate. the octane number. The lower this indicator, the more freaks burning gasoline and its larger consumption.

Many models of benzos have two-stroke engines that work to a greater extent on AI-92 gasoline. Fuel for them must be connected without the help of others. It is better to pour gasoline of the brand that is determined for it by the manufacturer, another trimmer for the grass will be out of order. For example, with gasoline of the AI-95 brand, the engine will rapidly overshadowed, and when choosing AI-80, the fuel mixture comes out completely low, because the work of the motor will be unstable and with low power.

In addition to choosing a brand of gasoline, in the manufacture of fuel shift for motorcycles, it is necessary to use a special oil designed specifically for two.stroke engines. Semi.synthetic and synthetic oils are perfect for benzos. Semi.synthetic oils are in the average price spectrum, suitable for such technology from at least some manufacturer, lubricate the necessary elements of the motor well. Synthetic oils are more expensive, but when using them, the engine will work longer. In any case, when buying equipment, you should closely familiarize yourself with the annotation, because from time to time the manufacturer gives advice on the use of certain brands of oil.

Learning to dilute gasoline with oil for a trimmer for grass if you do not have or pour oil

If you bought a trimmer for grass, a lawn mower, a motorcycle, a chainsaw and other types of equipment, then you probably know that two.stroke engines are used as power units on them. These motors do not work on pure gasoline, like four.stroke, but on a mixture of gasoline with butter. In what proportion should be diluted gasoline with oil for a trimmer for grass. this question asks for himself every summer resident before preparing the tool for work. We will figure out in detail in this matter, since the dilution of gasoline with oil for a trimmer for grass affects the life of the tool, and improper preparation of the mixture will lead to rapid engine wear. What is the dangerous or insufficient amount of oil in gasoline for a trimmer for grass:

  • If gasoline is diluted with a large amount of oil (above the norm), this will lead not only to a large amount of smoke, but also to the formation of a carbon on the walls of the cylinder and a drop in power. This incapacitance will cause wear of the piston, which will be diagnosed to reduce its performance
  • If gasoline contains an insufficient amount of oil poured into a trimmer for grass, then this is even more dangerous. After all, the working mechanisms of the engine will not be lubricated in sufficient quantities, which will ultimately lead to their rapid wear (rapid destruction of the piston rings and jamming of the motor occurs). With an insufficient amount of oil in gasoline, poured into a trimmer for grass, the wear of the motor will occur ten times faster

So that you do not have to pay for errors at the cost of overhaul of the engine or buying a new tool, it is necessary to fill the fuel of the correct consistency into the tank from the first day. You can find out the ratio in the instructions for the tool, since models of different manufacturers can give different recommendations. Usually this ratio is the following norms:

  • 1 to 25 or 1 liter of gasoline 40 grams of two.stroke oil
  • 1 to 40 or 1 liter of gasoline 25-30 grams of grease
  • 1 to 50. this is added to a liter of gasoline 20 grams of oil

The value of 1 to 50 is considered standard (indicated on canister with butter for two.stroke engines), but it is necessary to rely on it in the most extreme case, since the manufacturers indicate the recommended value of the proportion, and if it is not observed, the operational resource of a two.stroke motor decreases.

In addition to observing the proportion, you must also learn to prepare the mixture. After all, the option of adding oil to the gas tank is categorically contraindicated, although some do so. If you bought a trimmer for grass or a lawn mower, you will need the consumables that you will use to prepare the mixture. Instructions for the preparation of the fuel mixture in a trimmer for grass have the following view:

Prepare gasoline and two.stroke oil, based on the above recommendations for the choice of a lubricant and fuel in addition, for the preparation of the mixture, you need to take a container or container. Typically, a plastic bottle is used for this, the choice of which needs an appropriate approach. It should be clean inside. Using a milk container and other drinks is not recommended

The best option is a container from mineral water it is very important that the capacity has a whole value of volume, that is, 1 or 2 liters, so that you do not have to calculate how much oil is poured into a bottle per 1.5 liters, 1.3 or 1.25 After all, you can easily be mistaken, you can also need a syringe that is used as a measured device for dosing. For such purposes, a regular medical syringe for 10 cubes is suitable

It is desirable that the syringe has an exact measuring scale after preparing the necessary materials, you can proceed to cook

Instructions for the preparation of the fuel mixture in the lawn mower:

  • First you should fill a plastic container. The container is filled with 2 fingers not supplemented to fit the oil
  • The required amount of two.stroke oil is typed in a syringe, and poured into a bottle with gasoline. You need to do just that, and not vice versa
  • After adding a lubricant to the bottle, it requires to close it tightly with a lid and stir. However, take into account that the streaming needs oil with the designation “Pre mix”. If the container “Self mix” is on the container with oil, then you do not need to shake the container, and after connecting the substances, you can pour them into the tool tank

After preparing a fuel mixture for a trimmer for grass, it remains to season the tool, and start work. How to correctly refuel trimmers for grass, lawn mowers, chainsaws and other types of motorcycles, consider in detail.

DLE Dilutions and use in the trimmer only fresh gasoline is used.

Motor oil Huter 2t semi.synthetic for two.stroke engines, 1l review

Those who have equipment with a two.stroke engine on the farm are familiar with oil for two.stroke engines. It is usually used for portioned gasoline mixture, t.e. gasoline must be diluted with a certain amount of oil intended for these purposes.

Usually the manufacturer recommends pouring oil corresponding to the brand. It is not necessary to do this at all.to. The manufacturer tries to sell the TSM of his partners. When buying a fate, the oil specification is enough and the brand is not at all important. The oil is divided according to the API classification (American Petroleum Institute). Without details, it is just every type of oil for a certain technique that wears a letter designation. In the case of two.stroke engines, this is “2t”.

huter, lawn, mower, gasoline, pour

With the purchase of a lawn mower, Huter was bought by Huter 2T semi.synthetic for two.stroke engines, 1l.

Huter recently launched motorcycle equipment to our market and it (apparently due to a low price) is good at a good popularity.

Description

1l Huter 73/8/3/2 is designed for 2-stroke Huter engines. Can be used with any equipment and tools: trimmers, chainsaws, snowmobiles, etc.

Oil is ideal for working with low quality gasoline, as it is equipped with high.quality additives, which significantly reduce the deposits on the engine crankcase.

My neighbor has a benzotrimer from this manufacturer and does not yet complain. Although on a spit of folding valley other budget attributes.

When buying it may seem that this is German oil. After all, even in the name there is a letter of the German alphabet. But do not be fascinated by this t.to. Focus is that the homeland of the brand is Germany, and the manufacturer (traditionally) China.

Despite the manufacturer, everything is done qualitatively and soundly, even on the side surface of the canister there is measured gradation.

Why exactly semi.synthetics?

Here I choose according to the principle of middle peasant. If you take a mineral water, then it is thick and has a greater smoke. Synthetics, on the contrary, has less smoke, but here the price is different.

Packed goods parameters

Unit of goods: plaster, kg: 1.00

Length, mm: 120shirina, mm: 45 Lyuvota, mm: 200

Therefore, semi.synthetics is suitable for lubrication.

If synthetics are obtained after gas processing, then semi.synthetics after oil processing and mineral water is characterized by the presence of highly effective additives. Just what you need to lubricate the motor.

There was no protective film under the lid and this immediately dropped the bar of this oil to the bottom of the Chinese consumer goods.

Some kind of sealant got out of the inside. I still did not understand why he was there, but he could get into the oil and then into the tank of a gas station. Actually for this I will take off the star.

On the canister itself, the dilution of the oil is 1:50, but the priority of the recommendations for the benzos, and there 1:32. Accordingly, the oil mixed one to 32.

huter, lawn, mower, gasoline, pour

The oil has a red color and corresponds to more eminent samples (such as STIHL). A delicious raspberry shade is obtained in diluted form. This color is made specifically to see what gasoline is diluted and which.

As you can see from the photo above (I took a picture as I could T.to. the smoke is barely perceptible), then the smoke is not high. When diluting the mixture 1:32 there is a small blue exhaust. After a couple of hours of work, a small oily plaque forms on the mower. This indicates the correct lubrication of rubbing elements.

In general, the oil is not bad. Of course, it cannot be compared with the same “calm” at least in the difference in packages (the Shtil immediately goes with menica).

No doubt, the oil exceeds mineral and has less cargo and smoke.

An incomprehensible sealant on the lid of the jar spoiled the whole impression. I will take off the star for this. But when buying oil for two.stroke engines, you should look at this product.

Review: gasoline gasoline Huter GLM-5.0S. And how I used to live without her

Self.propelled, light launch, one refueling is enough for mowing 1000 square meters, 5 horsepower, mowing width 46 centimeters, 7 mowing height adjustments from 20 to 75 millimeters, easily rotated when driving, hard herbacular

Huter GLM-5 lawn mower.0S bought for my own needs. Tired of mowing with a trimmer.Until this, I used only a gas station for five years and realized that it has a number of significant shortcomings:- I need to carry it on yourself (you don’t have to work in the heat and you don’t have to go to the bath);- the back is very strained even if the belt is well fitted;. under the trimmer for grass, the grass constantly flies in all directions (you need protective glasses, and then all the green legs, those around them are scattering);- it is not everywhere that it turns out to sprinkle the grass exactly;- fishing line for the trimmer constantly clings to something and breaks. stopping is required;- and most importantly. Then you need to collect the grass manually, and this is another half of the time that is spent on mowing.

It was decided to buy a gasoline classic lawn mower, as in films. Why not electric?Yes, because on my site there are trees and there are buildings around which you need to mow. You don’t run up with the electric wire.

The choice was simple. I chose according to the following criteria: high power (so that even the drying of the mowing); low price (everything is clear and obvious here); self.propelled (so that I run after her, and not drag on myself); grass collector (to save time on the collection of grass).

Quick search for parameters on the Internet and the choice stopped on such a Huter GLM-5 gasoline lawn mower.0S.

The equipment consists of:- the lawn mower itself (a motor with the wheels assembled);- folding rod on lambs;- the key to replacing candles and maintenance;- a pair of plastic holders for cable and instructions.

Oil for four.stroke engines (SAE 30 or 10W40) is not included. Do not forget to buy it separately. Total needs 0.6 liters.

The machine is assembled very simple.Initially, the lower rod is connected (it lies separately on its own):

Then the main handle with two control levers is attached to the protruding end and the rubberized handle up, as shown in my photo:

All mounts on lambs with a convenient grip. One person will cope, but it is better to collect with someone’s help.

A plastic tank for grass is more like a cat carry:

According to the manufacturer, 50 liters of grass are placed in it. Maybe it is so, but practice has shown that it clogs quickly and not until the end.You have to devastate often, making a stop for this. But better than then with a rake.

The grass collector itself is tough, collected from two halves:

There are many stickers on the lawn mower that warns and remind of safety precautions:

If the grass collector is not fixed, then the grass is released directly under the lawnical mower.A plastic casing located behind on two strong springs prevents the end of the grass into your feet.

On the lid of the gas tank is another warning inscription, which states that the oil is not included in the package and that after the first 5 hours of operation, the oil must be replaced with new. Then the change of oil occurs every 50 hours of work. That is, I will be enough for the full season and I will change the oil 1 once a year.

A few photos of the appearance of the Huter GLM-5 lawn mower.0S.

The grass collector is attached to its plastic hooks right on the springs of the rear cover, which must be opened to the end:

The mount does not look reliable, but it is well fixed.

The next photo shows a lever (it is located behind the right rear wheel) to adjust the mowing height (from 20 to 85 millimeters):

In fact, the lever simply raises the entire lawn mower above the ground.

Let’s get a car under the belly until I flooded gasoline and oil.

Below is a steel cutting screw:

| Denial of responsibility | Contacts |RSS