Proper use of electric screwdriver

Electric screwdriver successfully replaced not only different types of screwdrivers, but also warden, hexagonal keys. This tool is also used instead of a drill. For builders with furniturers, the electric shuruvrustrot has become an indispensable assistant. For him and at home, there is constantly application. The assortment in the market is represented by a wide variety of models. Despite the prevalence of screwdrivers in various fields of activity, not all users, especially beginners, know how to operate it. Proper use, maintenance and storage of power tools will extend its service life to the maximum.

According to the power method, screwdrivers are divided into two varieties:

Recently there are also tools with a combined method of nutrition. They combine all the advantages of both varieties.

The external and internally device of network and battery models is almost the same. In general, the power tool consists of the following structural elements:

  • Hulls;
  • Cartridge;
  • Turning buttons;
  • Switch of the direction of rotation of the electric motor (reverse);
  • Speed regulator (number of revolutions);
  • Buttons of turning on on;
  • A tightening power regulator (switch of torque).

The photo further presents the design of the electrical screwdriver of the battery type.

A number of models are additionally equipped with backlight, which is constructively implemented in different ways. Not every product has a speed control and button for turning on on. Network electric shuruvrusts have a power cord, and the battery has a charge drive instead of it.

The housing of power tools is most often made of plastic, much less often from alloys of different metals. For convenience, it usually consists of 2 halves. There are such main details inside the case:

The circuit of electrical connections depends on the model.

Electric shurubover can be equipped with cartridges of different types. The most widespread is the rapidly packed three.Cube version of this part. The cartridge also consists of separate parts that are presented in the following photo.

It should be taken into account that if the purpose of the electrical screwdriver is highly specialized, then this may make some constructive changes.

The principle of operation of both network and battery screwdrivers is the same. It lies in the fact that electric energy leads to rotation of the electric motor. Through the gearbox and the shaft, the force and speed to the nozzle fixed in the cartridge are transmitted from the motor. It already drills a hole or screws or twists fasteners. A feature of the process is that the electric motor in network models operates at a variable voltage of 220 V, and in battery ones. On a constant one, the value of which can be in the range from 3.5 v to 36 V 36 V.

We buy everything you need

To fulfill the goal, you will need the following materials:

  • Professional polishing machine. If you do not want to spend money on it, you can use the usual drill, but the result will not live up to expectation.
  • Polishing circles. Firm circles are best suited for removing scratches and a scream, to enhance shine and give gloss. Soft and medium circles.
  • Special napkins or cotton rags.
  • Paste for polishing the body.

Choosing pastes or gels. How to polish the car.

In addition to polishing technology, the question is no less important than to polish the machine. Having understood the basics of production processes, you need to choose polishing pastes, protective and recovery polishes. It is customary to divide the polishing pastes into powder and gel. The first type of paste is chosen for hard coatings with numerous damage and polished the enamel with a decrease in granularity.

Gel paste operates mildly, they use them to polish soft paintwork of budget foreign cars with relatively small damage. Gel (pasty) and aerosol (liquid) pastes in cylinders are used for various parts of the body. Gel paste is applied to the polishing circle, it is convenient to process the side surfaces (doors, wings) of the machine with it. Aerosol paste spray the roof, hood, car trunk, after which they are rubbed with a soft polishing circle.

Using abrasive polishing pastes, you need to remember that the number of pollets is not endless. Each polishing removes a layer of paint, polishing the car weekly, you will rub the paintwork in a year.

In the same way, abrasive polishing of the machine is carried out after body repairs and carcasses of the machine. In this case, its goal is to align the paintwork, eliminating the fluxes of the paint, the “shagren”. After painting, it is better to use gel polishing pastes.

You can see in more detail how to properly polish the car on

Than the body polishing is harmful?

This is very important, because an unskilled hard worker can easily irrevocably spoil the paintwork of your car. Subsequent polishing of such cars is a very big risk of burning the paintwork to paint or soil.

Experienced craftsmen advise to polish once every six months best before the start of the winter period and after it. If the mileage is from 50 thousand kilometers, then the period of conduct is reduced to 3-4 months. Before polishing, be sure to consult a master about your situation.

Is it possible to polish the car with a grinding machine

Transferred from a neighboring community.Apparently, for more than four years of operation, my Olympic gold has never polished and the body of the body has lost its original shine and acquired not a small number of small scratches. I was not going to give my gold for professional polishing in the service, because I asked there for full polishing of the body from 10k.

I watched not a small number of videos on YouTube and re.Read a huge number of records on the drive and decided that the body of my car is being filled under the power of everyone, including me.

See also  How to change a trimmer line on an electric trimmer

The most convenient tool for polishing is a professional polishing machine, which differs from a conventional corner grinder only by the presence of a speed control and a comfortable handle, but its cost is many times larger. True, there are several more tools that can also be polished the car body.Of the instruments, I had only an eccentric grinder and a regular drill with a revolution regulator, of course you can polish the entire body with your hands, but this will take not a little time and effort, and the result may not satisfy you.

Apparently, for more than four years of operation, my Olympic gold has never polished and the body of the body has lost its original shine and acquired not a small number of small scratches. I was not going to give my gold for professional polishing in the service, because I asked there for full polishing of the body from 10k.

Top 10 DONT’S of DA Machine Polishing

I watched not a small number of videos on YouTube and re.Read a huge number of records on the drive and decided that to polish the body of my car to each, including me.

The most convenient tool for polishing is a professional polishing machine, which differs from a conventional corner grinder only by the presence of a speed control and a comfortable handle, but its cost is many times larger. True, there are several more tools that can also be polished the car body.Of the instruments, I had only an eccentric grinder and a regular drill with a revolution regulator, of course you can polish the entire body with your hands, but this will take not a little time and effort, and the result may not satisfy you.

Having worked a little eccentric grinder, I decided that I would still use an old drill with a special nozzle.

I prepared everything you need and went carefully washing the car.

So let’s get down: first you need to wash the car completely, wipe it from all kinds of pollution, determine the places that require grouting. Deep scratches, shells, orange crust, spans of paint, etc.

From insects and strong contaminants that did not wash when washing, a special tool helped me a lot.

There were quite deep scratches on my body, so it was decided to first use the hard felt circle (in the second photo) with abrasive polishing paste Farecla G6 (on the first photo)

The first step is the professional polishing paste FARECLA G6 (in the first photo) for part of the body and try to evenly rub the body (preferably with hands).Then we take a drill, set it on it 1200-1800 revolutions and put on a nozzle with a hard felt circle (in the second photo). We begin to carefully rub the polishes with horizontal, and then vertical movements of the drill.All sorts of sharp transitions, moldings, bumper, I recommend that the corners are polished manually, t. To. By inability to overdo it and gradually, in these weak places you can get to the paint! Therefore, in large areas I apply a polish and polish the drill, and the rest of the places by hand, with a special fabric.

I did not polish the headlights of abrasive paste, but used anti.Tsarapins (in the first photo) and soft polishing disks made of sheepskin (in the second photo).

Preparation and abrasive polishing took too much time and already began to darken, so I decided to postpone polishing the next day I went to rest (I had to work on the night).

The next day plans to apply a finish polish and finish with polishing. In principle, the case remains for a small one: once again degrease the body and in the same method to apply a small composition. The polishing disk is now necessary to use the soft from the parrelon (in the second photo) along with the fine.Meaning polish Runway (on the first photo).

On the application of the finish polish spent much less time than on abrasive processing. We wipe the remaining polish on the back with rags and again my car with shampoo, so that there were no divorces and remains of the polish on the dried body.

Since the Rules of the Site cannot contain more than 20 photos, see the final result and photographs of my polished gold, see the next entry.P.S. I apologize for such a long post, no matter how hard I tried to paint in short.

Комментарии и мнения владельцев 134

Listen, why didn’t you polish with a grind?

I read, looked at the pictures, cried and laughed))) Learn the materiel, friend) and no more niyikoga do not polish like that

At a minimum, at the moment, there is a lot of information to absorb. On the same forum.Car-Care.Ru/ for example. What the author did is horror just. As much as the paste lies on the trunk, I would have enough for the entire side of the car, and the effect would be much more brilliant. Yet again! If you want the result? Buy with normal materials and tools.

My original purchase, cost me about 40 thousand. Which paid off through cars 5 probably. And now many hundreds of thousands have been earned even more so) In this case, there is always material for their favorite cars)

Good article, thanks!Here’s another additional information: www.Drive2.Ru/l/526591578865664920/

With water, they are skinned with very small sandpaper (1000.2000 and t.D.) Polish with pastes

I didn’t even want to comment on it, but it is worth warning other car owners. See examples of normal polishing the body of a DTL car.Expert/ Polirovka-Avtomobilya/ Evaluate when selling in the secondary market for painted body elements, the Redy will be instantly 5-10% and this is 50-100 thousand and you will not prove to anyone that the car was not in an accident, and you tried to polish this with your own hands, no one You will not even listen to the minus of the hundred from the price out of the blue In addition, after the polishing process, the upper layer of several microns is removed from the varnish, those coating becomes thinner, and to compensate for this difference, you need to apply liquid glass or nanocramics by a different lacquer of varnish. Subsequently, it will quickly collapse, especially under the jurisdiction of salt baths in the winter and then you will already fall into the repainting of not one body element, but the whole machine.

See also  How to cut glass properly with a diamond glass cutter

Types of polishing work

To begin with, we find that polishing of cars is divided into two main types of work:

  • Protective. Such operations allow for reliable protection of the colorful layer from minor mechanical influences, abrasion and even prevent the loss of their characteristics. The composition of pastes used to wipe the body includes substances such as Teflon, Wax, etc.
  • Repair is the most common type of work in which car owners resort to polishing their car body. Restoration work resorts to remove small scratches and other types of deformation of the body paint, for example, fragmentation of paint in the sun. The principle of reclamation work is to remove the upper oxide layer. For this, special types of polishing pastes are used. After the restoration work on the polishing of the body, be sure to grate the body with protective paste

You need to decide on the type of polishing work in order to choose the right accessories. After all, the quality of work depends not only on the substance used to be rubbed into the body, but also on the material from which the nozzle is made.

Polishing the car with an electric screwdriver, the necessary nozzles.

Typically, polishing the car with an electric screwdriver is performed using the following types of nozzles:

  • Felt. They are designed to clean the surface before polishing and for the final polishing of the body. Such circles from felt in the shape of a cylinder or flat. Sheepskin nozzles are used for final polishing of the body, as they give a dazzling gloss of the surface.
  • Foam rubber. Keep in mind that the smaller the cell on foam nozzles, the softer the result of processing will be.
  • Leather nozzles or circles from a fabric cord. Designed to cleanse the surface before polishing. They are suitable for any surfaces.

Polishing the car in hard.To.Reach places

Typically, polishing the car with an electric screwdriver is performed using the following types of nozzles:

  • Felt. They are designed to clean the surface before polishing and for the final polishing of the body. Such circles from felt in the shape of a cylinder or flat. Sheepskin nozzles are used for final polishing of the body, as they give a dazzling gloss of the surface.
  • Foam rubber. Keep in mind that the smaller the cell on foam nozzles, the softer the result of processing will be.
  • Leather nozzles or circles from a fabric cord. Designed to cleanse the surface before polishing. They are suitable for any surfaces.

Polishing is the process of rubbing the car body with special lubricants that protect the paintwork and remove small scratches. So that the car is not only clean, but also shimmers in the sun, it is necessary to regularly carry out polishing operations. These operations allow you to solve a number of the following tasks:

  • Avoid premature destruction of the paint and varnish layer
  • Protect the body from corrosion exposure
  • Make the paintwork brilliant, which allows you to effectively highlight your car
  • Remove small scratches and scuffs of the paint and varnish layer

Depending on the type of polishing work, it is necessary to apply the appropriate nozzles. When using protective pastes, delicate nozzles are used, and if it is necessary to remove scratches and scuffs of the paintwork, you will need to use abrasive devices. You can carry out a polishing procedure through drums, screwdrivers and bells. To do this, it is not at all necessary to buy special polishing machines. Only when using the electrical tools under consideration, one part should be taken into account. They should have a speed adjustment function.

Now we will deal with the types of polishing nozzles for the car. They are made of different materials, but the most popular are foam and nozzles of sheepskin.

Bumper polishing, if it is made of plastic, is possible at home without the use of expensive materials. With ordinary gog paste or toothpaste, you can achieve amazing results to restore its appearance. To use the GOI paste to process parts at home, you need to adhere to several rules:

Politing of scratches, GOI paste, if a tool for processing in the form of a drill or a special machine is involved for this, should be carried out without effort so that new scratches are not formed during the grinding process.

Abrasive polishing of glasses and headlights when the scratches and cloudings appear on them with the help of a paste of goy or toothpaste in extreme cases are suitable for tooth powder. Lessons how to do this correctly, you can find on many videos, here is one of them:

Make a grinding of headlights or glasses after painting, if the paint came into these parts or remove the scratches after the operation of the corner grinding process, but quite feasible. All technology using a paste of goy, toothpaste or powder is almost similar to polishing the body with your own hands, a distinctive feature is only that the thickness of the headlights and glass is greater than that of the paintwork of the body. Accordingly, abrasive polishing of these places involves the removal of deeper scratches.

Polishing the car should be the rule for the stripping owner of his iron friend, given the above lessons and the video shown, such a conclusion should sound like an immutable axiom.

If the paintwork of your car has lost its former type and covered with small scratches and chips, then you can try to restore an attractive and brilliant appearance of the car using a hand polishing car body. In this article we will consider the option of manually, without using a grinding machine, because it is not always found in the garage of a motorist, and if there is free time and desire to correct the situation, then you can manually achieve even a better effect. For example, in Soviet times, there were no special polishing cars at all, but car owners using manual labor sought the brilliance of their cars using the same GOI paste and other means that could be found in the store.

Restoration is possible primarily small scratches on the varnish varnish. You probably noticed small scratches of white or dark in color on the back, but when washing they disappear, and after that they appear again. This is due to the optical effect of light refraction. The scratched varnish displays a slightly different shade, but when washing, the manner fills with water, which has similar properties of display with varnish and visually this defect disappears, but it is worth it to dry, it appears again. These are small flaws, you can eliminate manual polishing of the car, thus, updating the LKP and giving a more presentable view of the vehicle.

See also  Is it possible to polish with a grinder. What is an eccentric grinder

It is important for the car owner to monitor not only the technical condition of the car, but also the appearance. To put the car body in order, it must not only be washed with a wax shampoo, but also to pre.Regil. The owners resort to polishing the body of the car not only to give the car a presentable look, but also to protect the paint and varnish layer from destruction. Polishing is also done in order to remove small scratches on the paintwork. Obtaining a qualitative result depends on the type of nozzle for polishing a car, so we will deal with their types and features of application.

Polishing is the process of rubbing the car body with special lubricants that protect the paintwork and remove small scratches. So that the car is not only clean, but also shimmers in the sun, it is necessary to regularly carry out polishing operations. These operations allow you to solve a number of the following tasks:

To conduct polishing operations, you will need the following set of tools and consumables:

To begin with, let’s figure out the fact that the car polishing is classified into two main types of work:

You need to decide on the type of polishing work in order to choose the right nozzles. After all, the quality of work depends not only on the substance used in the body, but also on the material from which the nozzle is made.

What types of nozzles for polishing the car body are

Depending on the type of polishing work, it is necessary to apply the appropriate nozzles. When using protective pastes, delicate nozzles are used, and if it is necessary to remove scratches and scuffs of the paintwork, you will need to use abrasive devices. You can carry out a polishing procedure through drums, screwdrivers and bells. To do this, it is not at all necessary to buy special polishing machines. Only when using the electrical tools under consideration, one part should be taken into account. They should have a speed adjustment function.

Polishing a car using an electric screwdriver

Protective polishing is designed for cars with intact physically paintwork. Only a change in its color is permissible. Therefore, in most cases, such polishing is used for new cars. Its function consists in protecting the paint from the negative effects of the mentioned factors.

Abrasive polishing, also called recovery, is intended for cars, the coating of which has defects in the form of cracks, chips, scratches and others.

The process of such polishing is much more complex and longer, in comparison with the protective. This is due to some differences in work technology. Thus, restoration polishing involves the preliminary removal of the upper oxide layer of the paintwork and aligning of defects such as scuffs and scratches, while the protective is only a mixture of the mixture. However, it must be borne in mind that damage to the primer cannot be eliminated by restoration polishing.

To perform work, you will need to purchase a policeman mixture. Based on the composition, these materials are classified into several types, which differ from each other in terms of durability and other operational properties, which determines the difference in value.

Wax polishing mixtures are considered the least stable. They withstand only 2-3 sinks. This explains the low cost of these materials. Teflon polishes are more reliable and preserved up to 6-8 sinks. They have protective properties in relation to ultraviolet rays, water and oxidation. These substances provide special aesthetic properties in the form of wet shine and color depth. Epoxy polishing mixtures created on the basis of epoxy resins and other polymers consider it very reliable. They persist from six months to 9 months. They have dirt and water-repellent properties and prevent the penetration of aggressive substances under the paintwork.

The most reliable among this kind of lacquer-conservations. They withstand 1-2 years depending on operating conditions. This is due to the fact that these materials are designed for particularly difficult operating conditions of the car. Therefore, they have increased resistance to all negative factors, both chemical and mechanical, due to the fact that they form an elastic protective film.

Bosch GEX 125-1 AE Professional Random Orbit Sander

The design and material of the nozzles for drones depends on the type of technological operations in which they are used. Various types of brush nozzles are used for stripping and peeling of surfaces, and for preliminary grinding. Flat or petal based on coarsely grained grindingbums. For thin grinding and polishing, fine.Grained abrasives or non.Woven materials are used. In the latter case, they are often used with grinding and polishing pastes and aerosols. Когда шлифовка требует снятия толстого слоя материала, в том числе и неравномерно, в дело идут шарошки различных видов из твердых абразивов на основе соединений алюминия и кремния.

Drill disk nozzle consists of tightly laid radial fibers diverging from the center of this tool. Depending on the purpose of the fiber can be made of various materials. For stripping from rust and old paint, fibers of steel wire with a thickness of 0 are used.2 mm, and for grinding. From polymeric materials. The working surface of such a tool is not only a horizontal plane, but also the side edge. Therefore, they are used to grind narrow cracks and other inaccessible places.

Lesson circles are also used as nozzles for drones. They consist of many identical stripes of grinder, fixed at one end to the axis of rotation, as a result of which a dense circular brush of abrasive lamella is formed. For external similarities, such nozzles in everyday life are called fan.

| Denial of responsibility | Contacts |RSS