What does an electric screwdriver do?

Designed for drilling and working with fasteners. It has a torment-swing coupon. Can have 1, 2 or 3 rotation speeds. Can have a shock function (an axial blow, like a shock drill).

Is it realistic to twist the screws with a drill? You can, but do not lose sight of one feature of an electric screwdriver. This is a kind of symbiosis of the cross.Cutting screw and drill. The tool adjustment will be especially appropriate.

Is it possible to use a shock drill as an electric screwdriver?

The shock drill can be drilled in a regular drill mode, and you will also have a shock drill. An electrical screwdriver, when it will be necessary to tightly tighten the bolts and nuts or unscrew or unscrew the accumulated bolts. If you are not going to work with concrete and brick, buy a set of drill and shock drill. An electrical screwdriver.

If we compare the network electric screwdriver and a wireless drill, then the electric screwdriver is easier, and in the drill the engine is more powerful and with solid building materials, it copes better. The level of comfort is also of great importance, wireless drills are more powerful, but also harder, working with them for a long time becomes tiring.

How to spin a screw into a tree.

You can tighten self.Tapping screw into a tree in three ways, screwdriver, electric screwdriver or drill. The easiest and practically without a costly way to tighten the screw with a screwdriver. The tree material is soft and suppressive, which allows you to tighten a sufficient amount of screws into it without much fatigue with a screwdriver. In order to tighten a large number of self.Tapping screws, you will have to resort to the help of an electric screwdriver, it will perform the entire power part of the work for you. It will also not be difficult to tighten the self.Tapping screw into the tree with a drill, but for this the drill should have a function of smooth adjustment of the speed of rotation.

How to tighten a screw into a tree with a screwdriver.

In most cases, you have to tighten self.Tapping screws with two types of slots into a tree, flat and cruciate. To twist such self.Tapping screws, appropriate screwdrivers with flat (marking SL) or cross.Shaped (pH marking) tips are selected. Also on sale you can find cross.Shaped bits with pz marking. PZ bits have additional faces and are used for screws with in.Depth slings. Sometimes screwdrivers with a flat tip are called minus, and with a cruciate tip is called plus or curly. In their labeling, in addition to the letter index, there is also digital indexation, which indicates the width of the flat tip or to the group to which the cross.Shaped tip belong. In the manufacture of furniture with your own hands, you have to tighten the diameter of which the diameter of which is from 2.2 to 4.2 millimeters. Therefore, for twisting self.Tapping screws with a flat slot, the designation of the screwdriver must be SL from 4 to 8, and for twisting of self.Tapping screws with a cross.Shaped slot, the designation of the screwdriver must be pH or PZ 1 or 2.

How to spin a screw into a tree with an electric screwdriver.

Even a person far from twisting into a tree with an electric screwdriver will cope with an electric screwdriver, since an electric screwdriver will do all the work for you, you just need to choose the right nozzle for an electric screwdriver (bit). The rules of which must adhere to when choosing a bit to twist screws into a tree the same as when choosing a screwdriver.

See also  How to change a drill in a perforator. If the drill is stuck

How to tighten a self.Tapping screw into a tree with a drill.

To tighten the screws into the tree, the drill should have the function of electronic control of the speed of rotation. In other words, the rotation turnover of the cartridge of the drill should smoothly increase as the button click. It is also worth remembering that most drones do not have the function of adjusting the maximum effort like an electrical screwdriver and therefore you need to independently control the depth of the screw twisting and remove the finger from the button in time. A conventional drill has enough strength to tighten the self.Tapping screw deep into a tree or even tear off the self.Tapping hat.

How to tighten a self.Tapping screw without a screwdriver and without an electric screwdriver.

This method of twisting of self.Tapping screws is of course an exception to the rules, but in some cases when it is very necessary and only a drill and self.Tapping screws have nothing left but to clamp a self.Tapping screw directly into the cartridge and slowly tighten it. So that the self.Tapping screw is scrolling in the cartridge, you can knock several times on the rib of the self.Tapping screw with a hammer so that it does not become round, but slightly deformed.

What drill to spill under a screw into a tree.

It is not necessary to first spill the hole, since the self.Tapping screw is nothing more than a self.Cutting screw, and according to the specification of the manufacturer into wood and plastic, it is twisted without sprinkling. In confirmation of this, you can think about what should be a drill for drilling under a screw under a tree of 4.8100, and if you reason logically, then the diameter of the drill should be approximately 3 mm. And the length is at least 130 mm. (100 drill and 30 pour into a drill cartridge). It is unlikely that such a drill can be found on sale.

How to Put an Anchor in Drywall Without a Drill : Nails, Screws Wall Hangings

And finally. Remember that poorly stabbed self.Tapping screw holds much better than a well.Twisted nail.

How to drill a hole in the concrete with a shock?

Additional information about self.Tapping screws

Without self.Tapping screws, it is difficult to imagine any construction or repair. These products have such a name only among the people. In fact, they are called self.Cutting screws. They are indispensable in many cases. When twisting, the screw cuts the thread itself and is securely fixed in the material. They are produced for wood, metal, concrete.

All of them are made of strong steel. For entering into wood, self.Tapping screws have a wider threaded step than for metal. They can be wrapped in foam concrete blocks, but the mount will not be reliable. Familiar to many Anchor masters are not self.Tapping screws.

You can find different forms of the hat in screws. The corresponding bits are selected for them. These fasteners are used to work according to:

If plasterboard sheets are attached to a crate from metal profiles, then screws are needed for metal. On a wooden crate, wood products are used. Publishing drywall is not allowed. The screw should go deep into only 1 mm. The recess is then sealed with putty. You can’t hang heavy things on drywall structures.

Comparison of electric screwdriver and drill

To begin with, it is worth understanding the distinctive features of these tools, because, although they both make a rotational movement, they have different assignments.

possible, tighten, screws, drill, choose

The most important difference is the speed of rotation of the working spindle. The rotation of the electric screwdriver is much slower than that of the drill. Also, he does not have inertia. The tool stops at the same time when the mechanism is turned off. When drilling, the spindle continues to rotate for some time after disconnecting.

The drill is a tool potentially more dangerous than an electric screwdriver, so when working with it, a special safety precaution is required. Protective glasses, in addition to ordinary attentiveness, accuracy and caution.

See also  How to choose an electrician home. Which company to choose an electrician: reliability and quality

The selection of the working mode is another difference between the tools in question. The drill, in addition to the main one, also has a shock mode, while an electric screwdriver is regulated only by the speed of rotation of the spindle.

As can be seen from the comparison, the drill is less suitable for working with screws and bolts, however, it can be adapted for this case.

Tips when working with a drill. An electric screwdriver

Before starting work, you should make sure of the serviceability of all parts of the tool;

possible, tighten, screws, drill, choose

After a long break in the work, the battery is still discharged, in this case it should be recharged;

It is necessary to make sure that the electric cable does not pass in the places of drilling and the pipes of water and gas pipeline are not laid;

When working the tool, it is necessary to avoid frequent braking of the electric motor, this can disable a battery;

Carefully take the polarity check when connecting to a charger;


The modern market of construction fasteners offers the buyer a wide selection of screws. So necessary for any repair of products. However, reviews about these “little assistants” are not always flattering.

The thing is that home masters often do not know how to screw a self.Tapping screw and how to choose it in general.

Types of screws

Two main types of screws used for independent repair can be distinguished. For wood and universal. Their main difference in the step step is “screws” for wood are characterized by a big step (more rare application of thread turns).

There is an erroneous opinion that universal details are also good for wood, plywood and wood-based stove, as well as specialized. No, of course, it will not be screwed into these materials, but now, how well they will hold there is a big question. The fact is that the “raw materials”, into which the self.Tapping screw is “plunged”, should reliably sag in thread grooves, and the structure of the wood will not allow it to be qualitatively located in narrow “grooves” of universal self.Tapping screw.

Tools for twisting screws

Fasteners can have hats of different sizes and different in shape and size of the recesses in them. Therefore, before screwing a self.Tapping screw, make sure that your arsenal has a screwdriver or a fragment with a suitable nozzle. In general, there are better nozzles for appropriate tools, as they say, to the maximum. Plus, they should be regularly replaced, since wear of devices during operation cannot be avoided.

Note! The best nozzles are made of instrumental steel with strengthening additives. Do not opt ​​for the first set that falls, otherwise after a couple of days of intensive work you will have to go for new.

If your plans are wrapping one or two screws into a non-hardeous surface, then you can work with a screwdriver. If more, you can’t do without an electric screwdriver. Twisting fasteners with a screwdriver. The operation is not as simple as it might seem at first glance, and requires a certain dexterity. And the electric screwdriver will do everything quickly and efficiently.

General technology for entering screws

With the help of an awl, make a small recess in a place reserved for self.Tapping screw. Install the product “For position”. Caution, but confident movements, turn the part until it deepens well and is fixed in the material. After that, the effort can be increased. Closer to the end of the “process” speed must be reduced again. So as not to damage the self.Tapping screw.

How to screw screws into different materials?

Many men are not knowing how to screw a self.Tapping screw into the concrete, they spoil a sufficient number of parts purchased. In fact, everything is quite simple: the screws are “integrated” into concrete using dowels. Durable plastic “tubes”. First, a hole is made in the material, a dowel is installed there, which “accepts” the fastener.

It is worth knowing! People’s craftsmen advise to lubricate dowels with glue before installation. This, in their opinion, strengthens the compounds.

The holes in the concrete should be drilled exclusively with the help of a peorator. Even the shock drill may not withstand, what can we say about the usual. Self.Tapping screws are suitable for both wood and universal.

See also  Is it possible to polish with a grinder. What is an eccentric grinder

In these environment, screws are screwed in the same way as in concrete. The only thing to work with tiles is better to take a conventional drill, since it can split from the excessive power of the penetrator.

Measure the diameter of the rod of the mounting product excluding the thread. This manipulation must be performed by a caliper. Install pointed sponges perpendicular to the screw and hold the product so that they completely penetrate the threads of the thread; Determine the diameter. A drill with a diameter of a millimeter and a half smaller value, make a hole in the material. Tighten the self.Tapping screw into the hole. And the work is done. Use parts with universal thread.

Note! Before “perforating” the main design, it is recommended to check the drill on a small unnecessary piece of similar material. Drill a hole and try to tighten the product there. The drill is considered correctly selected if the self.Tapping screw passes into the hole tight enough, but not jammed. In the event that the screw is unable to “break through”, you should work with a thicker drill. Too light tightening the part symbolizes that you need to take a thinner drill. Otherwise the self.Tapping screw can jump out at any time.

possible, tighten, screws, drill, choose

The hole in the material should be equal or slightly exceed the diameter of the rod without a thread. Self.Tapping screws will not be able to cope with a number of solid metals. In particular, it is almost impossible to screw these fasteners into cast iron in cast iron.

Not every plastic is ready to accept self.Tapping screws, so make sure that the material is definitely suitable for work will not be superfluous. The technology for entering the self.Tapping screw into plastic is the same as for soft metals. Copper, aluminum, bronze. Recommended products. With wood thread.

Do not know how to screw a self.Tapping screw into the board? Believe me, there is nothing easier. The main rule is to use only wood screws. For hard varieties of wood, thin boards, wood-bearing plate, wood-fiber plate preliminary drilling of the hole for the product is mandatory, since there is a risk of a split of the material with a self-tapping screw. For thick boards made of soft wood without this manipulation, you can do.

  • With solid wood. Choose a drill with a diameter equal to the diameter of the screw of the screw (naturally, without thread);
  • From wood.Fiber slab. 1 millimeter smaller;
  • With a wood-piece plate or soft wood-2-3 millimeters less.

Choosing The Right Size Pre Drill Bit | Beginner

Sovele on a sheet of points with a pencil. The optimal step between self.Tapping screws is up to 70 centimeters depending on the alleged loads on the structure. If you use an electric screwdriver, you can start screwing the product at maximum speed. After the self.Oreb enters the surface by ½, it is recommended to gradually reduce the speed to the minimum. When twisting with a conventional screwdriver, all movements should be smooth. It is very important to properly spin the self.Tapping screw. Ideally, it should be 1 millimeter below the level of cardboard, not gypsum! This will ensure the maximum strength of the future design. If you suddenly did not observe the technology and broke through the cardboard, the “ill-fated” place must be plunged, and a new fastener part is placed at a distance of 5-9 centimeters from it.

Is it possible to interfere with the plaster drill?

If not large volumes and the work is not constant, but periodic, then you can knead a cement mortar with a drill, you need such a whisk to the drill. But it is necessary to clearly understand that when mixing the solution on the cartridge, the drills will affect the side loads, the drill, unlike the construction mixer, is not designed for this.

possible, tighten, screws, drill, choose

A gaykovert can be with something an electric screwdriver, tasks are able to replace any. Since they are plastic, it is convenient to get rid of their characteristics of course using pliers.

| Denial of responsibility | Contacts |RSS