Applications for repairing trimmers STIHL

Trimmers for STIHL MODEL HALL: FS 100 replace the gas cable, spare parts are trimmers for the STIHL MODODED: FS55 need diagnostics of a trimmer for grass, if necessary, if necessary, if necessary. repair. Trimmers for the grass stihlmodel: 81 when the grass is mowing, the coil turns fall and stalls, does not turn on immediately, after an hour and a half the same-40-50-sequic works, the revolutions fall and turns off. STIHL MODEL TRAMMERS for grass: I don’t know when the load turns off and turns on periodically.Inside the switch does not always work when pressed. STIHL Model Trimmers for grass: FS 81 during operation began to stop spontaneously the engine, after releasing the trigger is launched and everything is repeated. Sinned on the fee of speed regulator. Replaced, but the problem remained. The brushes are normal, their fit is normal, there is practically no sparks when rotating the rotor. Flexible shaft works in grease. The ending when checking the tester turned out to be a worker with a clear fixation. What else can be faulty? Trimmers for the STIHL MODODED: 81 I incorrectly refueled the fishing line for a trimmer, I can’t unscrew the coil head, its rotation is blocked and the trimmer for the grass stops mowing trimmers for Stihl Model grass: FS55 stalls the speed of the trimmeres for the Stihlmodel grass: I don’t know the Viking1000 trimmers are ceased to turn on the viking1000 trimmers For STIHLMODDED YOURT: FSE. 81 The coil with a fishing line removed from the shaft along with a metal.stimmer for grass sticked on it with a metal nut, fs70/rc do not run the engine

Installation of a cutting disk

How to correctly put a disk on a gasoline trimmer for grass. We are in the video.

On powerful and professional equipment, saw discs are installed, which have up to 80 teeth, and sometimes also carbide (winning) attacks on the teeth. Such a victory disc for a trimmer for grass is rarely used in private household, mainly it is placed on professional motorcycle. It has a very long resource and universality of use for both fresh grass and dry impassable weeds.

Discs also differ in the thickness of the blade, which can be from 1.3 to 4 mm. Thin discs are cleanly, quickly and carefully cut off the grass, but they are blunt faster. The thickest knives do not wear out for quite a long time, but they are more suitable for rough shoots and weeds.

As practice shows, the most common shape of a knife for a trimmer for grass is round with teeth around the circumference. A variety with 4 large teeth and a nearby small cloves between them is also a frequent choice. They most effectively help in cleaning the site, are easily installed on any model of trimmers.

Sharpening of the disk

Regardless of the quality of the disk, over time it is stupid and begins to cut the grass poorly. If the knives are still relatively new, and the replacement is inappropriate, you can sharpen them with your own hands.

disassemble a trimmer for grass, remove knives; Carefully inspect the disk. if cracks are discovered, it is better to change the part to a new one, since its further operation is unsafe; bent blades can be carefully bend with a hammer; Given the size of the disk, you need to choose the right file for metal, this will provide more convenient work; At an angle of 30 ° equally sharpen all the upper cutting edges of the disks; collect a trimmer for the grass in the reverse order.

To sharpen the disk, you can use an sandpaper at low speeds by installing a circle for grinding with medium.sized grain. Through such a tool, the process will move much faster. For safety, you need to put on gloves on your hands, and a protective mask or glasses on your face.

So, for beating grass on gasoline and electrimers, plastic and metal disks of various shapes are used and with a different set of blades. They are chosen in accordance with the type of work performed and the size of the processed territory. If the knives on the mower are swept away, they are easy to sharpen or change them on their own

Despite the simplicity of the procedure, you need to be neat and remember the safety so as not to injure by negligence or not to damage the technique. A more detailed description of the replacement of knives in relation to a specific model of a trimmer for the grass can be viewed in the instructions for operation or on the official website of the manufacturer

For clarity, the general process of the process is shown in the video.

Replacing a candle

In some cases, problems can be with a candle, it may not give a spark in contact with the body.

With this malfunction, the candle channel must be dried for at least half an hour, clean the part, check the wire. if the contact has departed.

The most common malfunction associated with the spark plug in the benzo.cave is its pollution or mechanical damage (for example, a crack in the case).

If the problem is a faulty ignition unit, it is better to contact a specialist.

If it is decided to eliminate the problem on their own, it is necessary to cool down the motor, carefully disconnect the high.voltage cable, unscrew the candle and inspect for damage (deposits on the ignition candle indicate the use of poor.quality fuel).

In some cases, it may require cleaning the air filter, and sometimes replacement.

The filter cleaning procedure should be carried out regularly for the normal operation of the device, and the replacement of the part is one of the most widespread faults of the lawn mower.

The filter should be washed with gasoline or water with the addition of special detergents, dried dry and installed in place. Moisten the fuel mixture before installation.

Installation of a new fishing line on the coil of a trimmer for grass

Equipping the coil with a new fishing line is performed in the reverse order. The procedure looks like it is described below, regardless of the model of the lawn mower:

Step one: fixing and styling

Fold the end of the fishing line in half. Place the workpiece above the coil on each side of each half of the winding area. Wrap both halves completely around the winding drum. Stretch the fishing line for the trimmer through the loop.

The procedure for preparing fishing line in the field of both wound sections of the drum. The loops are laid in specially made cutouts, after which the winding of the fishing line is performed in each area

Pull the fishing line for the trimmer enough and put the knot in the groove made on each side of the winding drum.

Step two: winding cutting material according to sections

The next step is to turn the fishing line in a circle of coil, observing caution. It is necessary that each half be filled with “its own” winding, exactly, without intersections

Usually on the hull of the winding drum you can see the arrows indicating the direction of winding. This moment should be borne in mind, filling the reel with a fishing line.

Step Three: The Club of the Head Noner

Stretch the ends of the fishing line through a pair of oval cuts of coil. Replace both goals and a spring (if any in the design) with new elements included in the package. Bend both ends of the fishing line at right angles.

The last technical stroke of the process of replacing the fishing line on the trimmer is to put the cover on the head with subsequent fixation by pressure and slight turnover.

Let each end into the hole, which is at the base of the winding drum. Install the coil in the inner area of ​​the head with an emphasis on the spring. Put the lid, leve on the base and light pressure down with a small rotation counterclockwise, put the cover on the tongues of the latch. This is where the replacement procedure is completed.

How to choose a trimmer for the head of the head?

So that the head of the mower is highly efficient, the owner of the bushore should approach it correctly. In this case, several factors should be taken into account:

  • An experience. If the buyer. Novice gardener, it is best to buy an automatic coil. Semi.automatic and manual coils are best suited for more experienced gardeners;
  • Material. The reliability of the coil depends on this. They are considered the most durable metal models, but they weigh much more than standard plastic devices. When working with a metal coil, the braid engine is under a large load, so you only need to buy them to work with a powerful brush;
  • The diameter of the used mowing fishing line. For medium power trimmers, coils are used, which can be tightened with a wire thickness of not more than 1.6 mm. lawn mower with a capacity of more than 2.5 liters. FROM. Lamps can be installed that can be delayed using a cutting cord with a thickness of more than 2 mm.

An important role in choosing a coil is also played by the simplicity of its design. For beginners, coils consisting of a minimum of parts are best suited. experienced gardeners can use heads with a large number of elements in their design.

TOP 3 most reliable drums for home use

The market has a rating of the most durable mowing heads. They are distinguished by the simplicity of the device, reliability and resistance to damage. These include:

3rd place. Bosch K-103. This is a universal coil weighing about 300 g. Most often used to equip Makita and Hyundai motolers. The model is characterized by low energy consumption, impact resistance and durability. The core and its other parts are made of forged steel, and the case. From plastic;

2nd place. Flymo 15. This semi.automatic model of a trimmer for grass is equipped with a thin cup, which increases the flow rate. Nevertheless, he worked perfectly when he mowed grass in rocky terrain. To work with it, you need to use only a thin fishing line for a trimmer;

1st place. EFCO 8100. This model is one of the most reliable mowing heads. It works in fully automatic mode, which facilitates its filling with a cut cord. Only thin hair is used to work coil. The model of the model is made of durable multilayer plastic.

Despite stability and durability, all these coils are much cheaper than other analogues of lower quality, which makes them leaders in the post.Soviet market.

Installation of a new fishing line on the coil of a trimmer for grass

Equipping the coil with a new fishing line is performed in the reverse order. The procedure looks like it is described below, regardless of the model of the lawn mower:

Step one: fixing and styling

Fold the end of the fishing line in half. Place the workpiece above the coil on each side of each half of the winding area. Wrap both halves completely around the winding drum. Stretch the fishing line for the trimmer through the loop.

The procedure for preparing fishing line in the field of both wound sections of the drum. The loops are laid in specially made cutouts, after which the winding of the fishing line is performed in each area

SWAPFILE. ФАЙЛ ПОДКАЧКИ MACOS/HACKINTOSH!

Pull the fishing line for the trimmer enough and put the knot in the groove made on each side of the winding drum.

Step two: winding cutting material according to sections

The next step is to turn the fishing line in a circle of coil, observing caution. It is necessary that each half be filled with “its own” winding, exactly, without intersections

Usually on the hull of the winding drum you can see the arrows indicating the direction of winding. This moment should be borne in mind, filling the reel with a fishing line.

Step Three: The Club of the Head Noner

Stretch the ends of the fishing line through a pair of oval cuts of coil. Replace both goals and a spring (if any in the design) with new elements included in the package. Bend both ends of the fishing line at right angles.

The last technical stroke of the process of replacing the fishing line on the trimmer is to put the cover on the head with subsequent fixation by pressure and slight turnover.

Let each end into the hole, which is at the base of the winding drum. Install the coil in the inner area of ​​the head with an emphasis on the spring. Put the lid, leve on the base and light pressure down with a small rotation counterclockwise, put the cover on the tongues of the latch. This is where the replacement procedure is completed.

Installation of a knife on a trimmer for grass. video

We suggest you familiarize yourself with a video instruction on replacing a knife with a Stihl gasoline trimmer. We remind you that the stages of installation may vary slightly depending on the model. Therefore, do not forget to look in the instructions!

If the disk on the trimmer is used regularly, it needs to be removed from time to time to remove and sharpen or change it to a new. This part can be made of metal or plastic, have a different number of blades, but the replacement process remains the same. over, this procedure is similar to the equipment of different manufacturers, whether Carver or Huter, but minor differences are possible. Changing the knife on the trimmer is quite simple if you observe safety precautions and know the correct procedure for which you can find a description of which you can in the user’s instructions. The whole process of replacing step by step, as well as the way of independent sharpening of knives, will be described in this material.

When the use of knives is relevant

When using motorcycles in summer cottages, the most popular nozzle is a fishing line for a trimmer. It has a small price, suitable for different trimmer heads, is safe when working. The minus of the application of the fishing line is that it is convenient only for the bevel of low shoots. In other situations, the string is immediately clogged, regardless of whether the gasoline or electric model of the trimmer for grass is used. In addition, vegetation is wound on a spindle, which creates significant resistance on the shaft and leads to its breakdown. It can also provoke a failure of the piston system in benzocos or burning out the motor in electrimmers.

replacement, disk, stihl, system

Решаю проблему при загрузке ПК. Smart status BAD. Backup and Replace | Moicom.ru

Therefore, for mowing high or hard vegetation, various nozzles are used. So, for harvesting tall and rough grass, thin shoots of trees and shrubs to install and use it better. This nozzle clogs much less often, which contributes to the greater wear resistance of technology.

On a note! Due to the fact that the engine of electrical and battery models is less powerful than on benzocos, so the use of discs is more relevant for gasoline braids.

Repair benzos STIHL

The official service center on the Dmitrovskoye Shosse offers inexpensive and high.quality repairs of Stihl Benzosos, we take into repair absolutely all the models of the famous German manufacturer.

  • Diagnostics free to sign up
  • Replacement of shock absorbers from 500 sign up
  • Replacing the clutch coupling drum from 600 sign up
  • Replacing the starter drum from 500 sign up
  • Shaft replacement from 700 sign up
  • Replacement of the duct from 600 sign up
  • Replacing the air filter from 150 sign up
  • Replacement of the intake pipe from 800 sign up
  • Replacement of the ignition switch from 600 sign up
  • Replacement of a muffler from 400 sign up
  • Replacement of defense against a scatter of 150 sign up
  • Replacing a carburetor from 600 sign up
  • Carter replacement from 2500 sign up
  • Replacing the gasket of the crankcase from 1500 sign up
  • Replacement of the starter coil from 300 sign up
  • Replacement of the crankshaft from 2700 sign up
  • Replacing the trigger / gas block from 400 sign up
  • Replacing Magneto from 400 sign up
  • Replacing the flywheel from 700 sign up
  • Clutch replacement from 600 sign up
  • Signing the handle from 300 sign up
  • Replacing the piston from 1500 sign up
  • Replacing the piston ring from 1700 sign up
  • Replacement of a primer from 300 sign up
  • Replacement of high voltage wires from 300 sign up
  • Replacing the clutch clutch spring from 700 sign up
  • Replacement of the starter spring from 400 sign up
  • Replacement of the gearbox from 300 sign up
  • Replacing the seals from 1800 sign up
  • Replacement of the fuel tank saopun from 400 sign up
  • Replacing dogs / springs from 700 sign up
  • Starter replacement from 300 sign up
  • Replacement of the fuel tank from 500 sign up
  • Fuel / filter replacement from 250 sign up
  • Replacing a trimmer nozzle from 150 sign up
  • Replacement of the gas cable from 400 sign up
  • Replacement of the cylinder from 1300 sign up
  • Follow Contain to record from 700
  • Replacement of the flywheel of the flywheel from 600 sign up
  • Washing the gas tank from 600 sign up
  • Turning test from 600 sign up
  • Verification of operability from 500 sign up
  • Replacing a trimmer nozzle from 150 sign up
  • Washing engine parts from 700 sign up
  • Carburetor washing from 450 sign up
  • Carburetor adjustment from 500 sign up
  • Gear lubrication from 200 sign up

Repair of STIHL lawn mowers

There were 61 service centers for repairing lawn mowers (electric and gasoline), garden trimmers, STIHL grass mowers: choose from the list, or send a request and the specialist will contact you.

  • Repair of STIHL lawn mowers
  • Payment by card
  • Urgent repair
  • Departure of the master
  • Calling the courier
  • Free diagnostics
  • Repair of STIHL lawn mowers
  • Payment by card
  • Urgent repair
  • Departure of the master
  • Calling the courier
  • Free diagnostics
  • Repair of STIHL lawn mowers
  • Payment by card
  • Urgent repair
  • Departure of the master
  • Calling the courier
  • Free diagnostics

m. Skobelevskaya street. region Leninsky district working village Drozhzhino Street New Highway D5 K1

  • Repair of the Stihl lawn mower
  • 24 hours
  • Payment by card
  • Urgent repair
  • Departure of the master
  • Calling the courier
  • Free diagnostics

Trimmer head Stihl Polycut 7-3. review

Hello, dear readers!

For 5 years now, I have been the lucky owner of the budget motorcycles of the Stihl FS38. Until this year, he supported his summer cottage in order and there were no problems, and then he was delayed with vacation and reached his native village, only in mid.July. And such a sight appeared to my eyes:

I tried to mow with an ordinary fishing line 2mm, but I immediately realized that neither my braids for grass for a long time would not be enough so. The 38th Stihl is a light, simple economical class model, goes without a gearbox, and the usual disk or cutter cannot be put there, respectively. Do not buy a new, powerful braid for 20-60 thousand, so that a small section several times a year?

He began to look for a solution on the Internet, and it turned out that it is in the form of Polycut 7-3 mowing head.

Upon returning to the city, he rushed to the only company store and bought this miracle with the proud inscription Made in USA on the box. Trifle, but nice

For 1110 we get a spitter head, 6 plastic knives, a metal stopped pin for the convenience of installation and removal, as well as a brief instruction manual.

Polycut 7-3 trimmer head is suitable for the following models of Stihl brand brand:

FS38, FS40, FS45, FS46, FS50, FSB-KM.

As for the knives, you need to make a slight digression here.

The fact is that in the picture they are orange, but I have it in the kit and in the store itself, only white from the previous model Polycut 6-3. As I understand the original knives are currently a deficit, and neither the official dealer nor private traders have them in stock. But as the sellers say, the knives are interchangeable and terrible in this is nothing.

Nothing new from the instructions, I did not recognize, except for one interesting moment.

It turns out if plastic knives or a trimmer fishing line for a trimmer to soak in ordinary cold water for 12-24 hours, this extends their service life.

In addition to knives in the coil, holes are provided for installing small pieces of fishing line from 2 to 2.4 mm. Why is it necessary, I honestly did not understand. In my opinion, it is easier to spend 2 minutes and rearrange the ordinary head under the fishing line for a trimmer. Although as a way out of the situation when there is no such mowing head at hand probably has the right to live.

Instructions read, it’s time to go to mowing.

We take out a set of 3 plastic knives in a pre-so-so-soaked set of pre-soaked in water.

Here it should be noted that the rearrangement of heads on the spit is carried out in a matter of minutes. Very comfortably.

And here is our test training ground. Three hundredths of meter grass that no one touched from spring to mid.summer.

Eyes are afraid, and hands do. In half a day with the smokers, it turned out like this.

So the trimmer head Polycut 7-3 looks in a disassembled state.

replacement, disk, stihl, system

The young shoots of trees up to 5mm and burdock knives mow without any problems, but this does not work for the benefit of their resource.

Well, now about my impressions of the kota head Polycut 7-3.

  • Grass up to 1 meter, if it is not a flight mows quite confidently, in one reception. Ordinary grass from 30 cm mows even like oil. Faster the fishing line two times.
  • No need to be distracted to release fishing line.
  • Cuts young growth of trees, small burdocks and other stem plants without much straining. True, this does not go to the benefit of the resource of knives.
  • When it hits hemp, stones and meek knives do not break.
  • The grass does not mean like a fishing line for a trimmer, but lays rows like a tractor mower.

The first insignificant minus is perhaps that it is inconvenient to bite the foundation at home. Since it is scary to damage the cutting tool. But in the principle there is a head for a fishing line for a trimmer for this.

| Denial of responsibility | Contacts |RSS