Replacing the piston on the STIHL 180 chain saw

Gear Replacement. Not a complicated process that every user can do. You can find all STIHL 180 parts in our online store. Let’s look at the signs of damage to the cylinder head and how to fix it. Here is a list of the most popular problems and malfunctions with the CPG:

  • deteriorated dynamics, the chainsaw simply “does not pull”;
  • a metal knock has appeared, if you add revolutions this noise increases;
  • Your chain saw’s exhaust has turned blue or white;
  • fuel consumption increases significantly.

Experienced users are very careful to make sure that the situation is not aggravated. If you do not pay attention to these problems. You will not only have to replace the engine piston in the future.

STIHL MS 180 oil supply repair

The owners of this model of the tool should be prepared for the fact that they may encounter such an unpleasant moment, as a leak of oil for chain lubrication. Oil can leak from the tool when it is operated and even when it is just lying idle.

What is the cause of the problem?? The problem is that the oil leaks because of poor sealing in the area where the hose from the oil tank and the pump are connected.

Interesting! Another oil repair article here!

To solve the STIHL MS 180 oil supply problem, it may be advisable to disassemble the machine.

  • Check the hose, if it is damaged, replace it with another. Or try degreasing and flushing the hose with a compatible sealant, that should do the trick.
  • Check the oil filter for breakage, clean it (if you filled it with used oil)
  • There may also be a clogged spark plug which creates a vacuum in the fuel tank and affects the fuel supply. The problem may be with the carburetor adjustment and clogged passages or air filter, you need to thoroughly clean the filter and carburetor passages.

In general, the main problem is bad oil.

It is not recommended to put oil in a chainsaw that is not designed for!

How do you change the oil in your STIHL 180 chain saw?

  • Do not spare money for the original oil 2-stroke STIHL HP oil is a little more expensive but cleaning costs even more.
  • In the fuel to pour a quality can and Mobil 1, and for lubrication is suitable three-phase, in any case do not fill the waste.
  • Inexpensive choices mineral oil 15-40, winter 10-30. M8 or M10, for example.

Be aware of your personal safety when working with a chainsaw.

Be aware of your chainsaw’s capabilities and the quality of your oil. Low-quality oil can be the cause of inefficient operation and may have a negative effect on the machine’s components.

Check and clean the STIHL MS 180 oil pump periodically to ensure that it runs smoothly. That will keep the oil flowing smoothly.

STIHL MS-180 carburetor

The STIHL MS-180 carburettor has a single no-load adjustment screw. The full-load nozzle is not adjustable, that is, it cannot be changed.

Know the basic rules for setting the idle speed:

1) Check the air filter, change it if necessary;

2) Check the spark guard, change or clean it if necessary. Then turn the engine on and let it warm up.

Repairing the carburetor of the STIHL MS 180

Repairing a STIHL MS 180 carburetor is a very complex process. Note that there is practically no risk of sudden changes to the cylinder piston group during the repair.

DIY STIHL ms170 (piston ring problem) Part1

If the chainsaw does not start, then apply the following steps:

1) Open and close the gas tank lid;

2) It is a good idea to remove the spark plug and then drain it;

If after that there are no positive results, it is better to check the condition of the air filter, the process of gasoline supply and the functioning of the spark plug.

The problem is related to the valve (blindfold), which is blocked and a vacuum is produced as a result. To eliminate this inconvenience, you need to clean the valve (blind) with a needle.

Systematically check the filter, if the muffler is clogged, then the unit will not be able to give the power that it is built.

If the chainsaw is purchased with a warranty (as a rule, there is no other option) immediately take it to the service.

The STIHL MS 180 chain saw is very easy to operate, has good ergonomics and offers a number of important advantages.

Manufacturer: ARCHER

ARCHER production is delivered to Ukrainian customers since 2010. This Australian company pays special attention to the quality of its products. Knowing perfectly well that professional chainsaw users do not want to lose time for replacements and repairs, but try to complete the planned work as fast as possible, the company’s engineers offer the best chains with cutting tooth “super tooth” and most durable guide bars. Professional ARCHER bars have a wide toe with four rivets for maximum durability in the toughest conditions. For large chainsaws, ARCHER offers guide bars with six rivets. The tire blade is made of alloyed steel by three-layer lamination technology. To combat corrosion on the surface of the bar is painted with corrosion-resistant lacquer applied by powder method. There is a roller bearing in a tire sock that allows to prolong a sprocket lifetime at the expense of friction losses during work and as a result decrease temperature of blade heating. because it’s the heat on the tire that usually causes the toe to “pop”.”If you want to buy an ARCHER tire but find it difficult to choose the right model, call us. Our company specialists will help you to make your choice.ARCHER piston groups have proven to be excellent. The company uses a no-pressure casting technique for manufacturing piston cylinders. Thanks to this, the cylinder material has time to get rid of gases and impurities during the cooling process. As a result, the crystal lattice of the metal is smooth and the cylinder itself is strong. So manufactured cylinders expand evenly when heated and dissipate heat well. Thanks to this, ARCHER piston groups last much longer than other piston groups.Particular attention should be drawn to the quality of ARCHER chains. Main advantage of these chains is that thanks to hardened metal rivets and pre-stretching in the factory during production process the chains practically do not stretch. It enables very long chain life and with correct sharpening it can be used until the cutting edge is worn out.

ARCHER products are represented in many countries. On this map you can see the flags of the countries, where you can find ARCHER Representative Office. Australia.

Due to the high quality and affordable chainsaw chains and tires made by ARCHER can be found in all corners of the world. In countries with cold or hot climate, in the West and in the East people prefer high-quality ARCHER brand parts.

ARCHER. The manufacturer of spare parts for chainsaws and brushcutters from Australia.The company office is located at: 380 FOLEYS ROAD,DERRIMUT VIC 3030 AUSTRALIA

Main production facilities of the company are located in China.Today, ARCHER products are available in more than 70 countries around the world.

Product quality.The products have a very high marketable quality, but at the same time, it remains in an accessible, for the average citizen, price segment.ARCHER Lancets. Lancets are produced in a modern factory with a floor space of 10,000 square meters. German flute steel is used for flutes production.Steel in coils is fed to the press shop where heavy duty presses stamp out the flange pieces. The process of producing flange pieces is fully automatic.After stamping, the pieces of the future lance are transferred to the garbage disposal site. Currently, the factory has two fully automated reeling lines and a number of filling and automatic reeling stations. Automatic filling stations require manual filling of lanzig particles into the hopper. Further the process of joining is held in automatic mode. Then the cut teeth are transferred to the chrome plating area.After chrome plating, the teeth are transferred to the sharpening shop. The sharpening process is fully automated.After the cutters are sharpened all shank parts are delivered to the storage room. Finished flange is produced in this workshop. Currently there are 12 automatic storage lines installed at the factory.Particular attention ARCHER pays to the quality of its products. There is an in-house quality control laboratory on the territory of the factory. The total area of the laboratory is 100 sq.m.м. Total cost of equipment used for quality control is approximately 6 million dollars. Every year the employees of the laboratory take samples of the products from each technological process. With the help of modern equipment which is equipped with a laboratory they check the geometry of cutting teeth, rivets and rivets, the strength and composition of the metal coating. If even the smallest deviations from the standard are detected, the corresponding technological process is stopped until the cause of failure is eliminated.

Price policy.Depending on the group of products, the cost of ARCHER products for consumers is lower by 15-30% than of other brands. The quality of spare parts remains at a maximum level.

Warranty CommitmentThe quality of the products is very high and the number of warranty cases is very small. In case of warranty situation we provide free of charge replacement without any questions.

ARCHER products have been supplied to Ukrainian customers since 2010. Particular attention of the Australian company gives quality of their products. Realizing that gasoline professionals do not want to waste time on replacements and repairs, but rather try to complete the planned work as fast as possible, the company’s engineers offer the best lances with cutting tooth “super tooth” and the most durable guide bars.

Professional tires ARCHER have a wide toe with four rivets, which allows maximum durability in the most difficult conditions. For the big chainsaws ARCHER offers tires with a bottom consisting of six rivets. The tire blade is made of light-weight steel with a three-layer lamination technology. To fight rust on the surface of the tire was painted with rust-preventive lacquer applied by powder method. A roller bearing is placed on the nose of the guide bar which allows to prolong maximum service life of the screwdriver due to the reduced rubbing losses while working and as a result. to reduce the temperature of the heating of the blade. Because significant overheating of the tire leads to the fact that the sock “splits.”

Electric screwdriver gearbox repair.

Screwdriver works, turns and rattles or speed 1-2 does not turn on, speed slips. So it’s the gearbox. Gearbox breaks less often, but if broken it is most often replaced completely.

If you have a screwdriver firm Interskol Makita these screwdrivers can be repaired by purchasing at our website Rear Part of the gearbox. Change is quite simple, disassemble the gearbox in sequence.

Useful Tips for Changing the Piston and Rings on a Gasoline-Powered Saw from “Do-It-Yourself Service”

replacing, piston, rings, stihl, chain

The photo shows the gasoline chainsaw disassembled.

The procedure for disassembling the chainsaw, replacement of the piston with rings and cylinder and further reassembly we described in the article “Replacing the piston on a chainsaw. Tips from Self Service. So we won’t repeat. Here we give you helpful tips and points out things to look out for special attention.

After the disassembly of the gasoline saw is done, it is necessary to qualitatively clean all parts from grease and dirt. You can use any auto shampoo and degreaser (gasoline, etc.) for this purpose.д., all there is).

All metal parts after flushing with gasoline are blown out of the compressor, as shown in this photo.

If there are any deep scratches on the piston, they can be try to removeUse emery paper. The movement should be perpendicular to the movement of the piston.

Use heat resistant sealant, as the thread locker for the screws when you screw on the cylinder head.

After sanding all parts with sandpaper, be sure to flush with gasoline. Be sure to clean off old sealant.

Use a ring cut to the size of the upper diameter of the piston to put the rings on the piston, plastic bottle. Put the ring on top of the piston through the bottle. That way you won’t have to look for broken rings.

When installing the piston, arrow on it must be pointing toward the muffler, as we see in the photo.

After applying the heat-resistant sealant and reassembling the engine, you need to 24 hours wait, until the sealant dries.

If the piston and cylinder with with deep scratches, it is better to change all together /new cylinder and piston and rings/.

After assembling the gasoline-powered saw be sure to check the:

If the repair is correctly, then your petrol chain saw will start right away.

If you are not qualified to repair your chainsaw, we recommend that you contact a service center.

Let’s choose chainsaw rings together with Benzip online store

Every third operator of a saw tool knows that chainsaw rings are an essential element of the cylinder piston group. Piston parts prevent grease and fuel mixture from the liner to the outside. That’s why on the piston of the saw Husqvarna 345 and two-stroke gasoline tools of other brands establish two compression elements that are installed in special grooves located on the piston.

When selecting piston elements on STIHL, Oleomak, Husqvarna and other saw models it is necessary to adhere to simple rules that will help to ensure the proper functioning of the tool:

  • Piston element size. If the saw tool is equipped with a 38 mm piston, then the additional parts must be of the same size;
  • Quality of piston material. This type of consumable is made of steel or cast iron. Each of these materials undergoes special treatments to ensure a long service life. However, steel alloys, which are used for the manufacture of piston elements, have greater strength and heat resistance;
  • Quantity. Saw consumables are sold as a set, but some unscrupulous dealers sell these consumables by the piece. That is why you should only choose spare parts from trusted suppliers.

Profile store Benzip sells quality consumables for power tools, including piston rings, which makes it possible to buy on STIHL or OleoMac spare parts in just a few minutes. Also, we can order consumables for grass trimmer or electric saw, the price of which will please.

Problems arising in the cylinder head

The characteristic signs of problems with the gasoline saw’s cylinder head are bluish or sometimes white smoke, the dynamics of the gasoline saw’s operation considerably worsens, knocks appear, and the mastel consumption increases quite a lot. Symptoms like these indicate the chain saw’s cylinder head is in urgent need of repair, and should not be left untreated! If you are lucky, such problems can be eliminated by the banal replacement of piston rings, but sometimes it happens and a more serious problem that needs to be corrected. Here is a short list of problems that can occur with the cylinder head:

  • piston rings are worn or even damaged;
  • there is scoring on the piston;
  • cylinder walls are damaged; worn out;
  • The cylinder walls are worn out.

Depending on the type of problem, varying degrees of complexity and high cost of repair. Small problems can cause an avalanche of troubles that can lead to an accident. Better to fight problems early on.

Do not ignore problems. If problems are detected, even small problems can lead to avalanche-like damage to internal parts of the chain block. Try to do everything you can to fix the problem early on.

Cylinder and piston for STIHL chain saw MS 180

Used in STIHL chain saws, model MS180. Piston rings 1.2 mm thick. Diameter of pin 10 mm.

38mm bore cylinder. 1 pc.

Manufactured by WOODMAN. Canada.

When replacing the piston group pay attention to the condition of the rubber nipple that connects the cylinder and carburetor. Even though the nozzle is made of gasoline-resistant rubber, it will lose its characteristics over time and may become rough and leak air. The spigot is inexpensive and it makes sense to replace it together with the cylinder.

How to correctly change a chainsaw and brushcutter cylinder and piston.

  • Make sure the cylinder you want to fit fits your chainsaw and brushcutter.
  • Clean the carburetor. It is very important to remove old fuel residue from the fuel tank.
  • Always change the fuel filter. Do not use an old fuel filter.
  • Clean the crankcase. Very good if it is possible to purge the crankcase from the compressor. Make sure there are no foreign objects in the sump.
  • Lubricate the crankshaft bearings. Use the highest quality lubricant possible.
  • Use a rag soaked in solvent to wipe off the cylinder you want to replace. Blow out the crankcase with air from the compressor.
  • Install the piston rings on the piston.
  • Lubricate the piston pin and install the piston so that the arrow on the piston points in the direction of the exhaust.
  • Warning! Install the retaining rings with great care.
  • Lubricate cylinder and piston rings before installing.
  • Replace the cylinder carefully.
  • Always use a new cylinder gasket when replacing the piston group. Note, some models of chainsaws and brushcutters use a sealant.
  • Tighten the cylinder mounting screws to the torque specified by the manufacturer.
  • Take the crankshaft and carefully crank the engine. Make sure that it rotates without interference.
  • For the first start, prepare a 25:1 fuel mixture and start the engine.
  • Adjust the carburetor and check the power tool for proper operation.

Delivery all over Ukraine: Kiev, Dnepropetrovsk, Kharkov, Lvov, Odessa, Poltava, Sumy, Ternopil, Rivne, Zhitomir, Zaporozhye, Ivano-Frankivsk, Kirovograd, Lutsk, Vinnitsa, Cherkassy, Chernigov, Chernivtsi, Nikolaev, Uzhgorod, Kherson, Khmelnitsky and other cities of Ukraine.

| Denial of responsibility | Contacts |RSS