How much oil is in gasoline for Stihl 180

Properly selected fuel mixture and lubricant guarantee the prolonged operation of the Stihl chainsaw. It is very important to be able to choose gas fluids, as well as observe all proportions when preparing it, not forgetting to adhere to safety rules when refueling.

Low.quality fuel can cause your tool to fail. UNETILED gasoline is usually used to refuel the stiHL chainsaws, where the number of additives without lead content exceeds 90. For this, AI fuel is completely suitable. 92.

AI is also used. 95, which is used much less often. It is made on the basis of AI. 92, but contains various additives that are deposited on the internal elements of the engine and can disrupt the operation of the mechanism.

At the same time, the mixing of both combustibles is permissible to achieve the optimal result.

It should be remembered that gasoline is recommended to use fresh t.to. With prolonged storage in closed containers, useful octane properties are lost.

Calculation of fuel mixture proportions

Correct refueling also implies strict observance of proportions. For a two.stroke engine, 1 part of the oil for 50 parts of gasoline is used. To comply with this ratio, you will need 5 liters of gasoline and 0.10 l of oil. It should also be remembered that the oil pump cannot be installed in such chainsales, and therefore the use of pure gasoline is completely unacceptable.

In the event that substances for the mixture have different brands, then it is recommended to use 1:40 proportion.

When a new chainsaw in the first 3 refueling, the oil is added 20 % more. In this case, instead of a 1:50 ratio, 1:42 will be used, and 1:40 is replaced by 1:33.

Violation of the ratio of fuel substances can lead to the formation of bully, as well as to the appearance of soot on candles and pistons.

How to choose oil for lubrication of a chain or motor

A good lubricant mixture extends the service life of the chainsaw and guarantees high quality work. For a new tool, it is recommended to use STIHL proprietary chain oil recommended in the instructions.

Otherwise, the chainsaws can be removed from warranty service due to non.compliance with operating conditions. At the end of the warranty wasproof, you can use oil of any other brand.

It should be remembered that it needs to be replaced twice a year.

STIHL has developed a whole line of lubricating mixture for two.stroke engines. High cleansing ability will increase the environmental friendliness of your tool.

All synthetic oils are based on primary refinants that can reduce the number of exhausts and prevent the breakdown of moving chainsaw elements during continuous operation.

STIHL HP oil. made on a mineral basis and has excellent properties of combustion and lubrication. Supplied in a different volume of 20 ml to 55 liters.

HP Ultra oil. suitable for prolonged use of the tool. Provides complete combustion of the fuel mixture and carefully lubricates the necessary components. Has a high degree of decomposition. more than 80 % in 21 days.

SAE 30 motor oil. used for any operating conditions on the garden. Helps to reduce fuel consumption and is characterized by high.quality basic oils.

10 W-30 motor oil-designed for 4-stroke engines. Resistant to temperatures up to. 30 ° C.

Refueling safety precautions:

  • We flammable gasoline, and therefore do not smoke, do not splash fuel and are at a distance from open fire.
  • Completely drown out the engine before refueling to allow you to cool down internal elements. Otherwise, a fire may occur.
  • Slowly remove the fuel tank lid. Excessive pressure should be reset slowly to prevent splash.
  • Carry out a refueling of the tool in well.ventilated places.
  • Make sure that the combustible mixture does not get on the clothes and the tool itself. Otherwise, do cleaning.

Depending on the construction of the chainsaw, the gas processing process may vary.

Using a special device:

Find a flat and clean surface for refueling. Put the tool with pouring holes up.

Wipe the chainsaw thoroughly with a clean rag.

Remove the fuel tank, as well as a tank with sawing chains using a combined or wrench.

Cautiously start the gas station. Make sure that the mixture does not spray. Fill the tank with fuel and oil tank. Filling can be controlled on transparent walls of tanks.

Tightly tighten the tan lids to exclude their arbitrary opening. Carefully monitor the tightness of the system. When the fuel leaks, do not start the engine T.to. This may pose a threat to your life.

In all other cases, observe the following sequence for refueling the Stihl chainsaw:

Select a flat and clean surface for the necessary manipulations.

Clean the area of ​​the pouring holes from possible contaminants.

Take the latch up and turn the tank cover until the clock is counterclockwise to remove it.

Carefully refuel the fuel tank and the tank for oil.

Take the lids until it stops and close the latches. When the fuel is leaked, do not start the engine T.to. it is dangerous.

The proportion of oil and gasoline for the chainsaw “STIHL”: types of oil, selection of gasoline and proper mixing

One of the important indicators of the durability of the chainsaws and their qualitative work is proper compliance with the ratios of the components of liquids in the preparation of the fuel mixture. It is known that an insufficient amount of oil leads to excessive friction of the parts and their rapid wear, and excess. to the appearance of soot, overheating of the engine. This article will talk about the proportions of oil and gasoline for the chainsaw “Stihl”. This is especially important for beginners who have just purchased a tool.

Characteristics of the chainsaw

Each chainsaw has three main elements that ensure its operation. These include a 2-pin carburetor engine and two tanks.

The fuel mixture is poured into one, the oil required for the lubrication of the chain is poured into the other. The volume of the fuel tank is 0.25 liters, which allows you to work without stopping 45–55 minutes. The volume of oil. less than twice.

With this ratio of volumes, the contents of both tanks ends almost simultaneously.

During the operation of 2-stroke engines, the oil pumps system are not used, so for the stihl chainsaw oil in gasoline for lubrication of the shaft, piston and other rubbing parts have to be added. Attempts to work on one gasoline or non-compliance with the proportions indicated in the instructions for compiling a fuel and lubricant mixture from two components lead to a breakdown of the tool.

How to Mix Fuel for Your Garden Power Tools | STIHL Fuel Mixing Guide | STIHL GB

Correct proportions

Most often, when preparing fuel for the work of saw, 1:50 and 1:40 are used to work. This means that one part of the oil is added to 50 or 40 parts of gasoline.

Calculations are made as follows: 1 l = 1000 ml, 1000/50 = 20 ml or 1000/40 = 25 ml, that is, in the first case, pour 20 ml into each liter of gasoline, and in the second. 25 ml of oil.

If there is no instructions and you do not know the proportion to prepare the mixture, then use the following recommendations:

  • Tool and oil of one brand. For example, for the Stihl chainsaw, the ratio of gasoline and STIHL oil will be the same as indicated on the container with oil, usually 1:50.
  • The substances used for the mixture have different brands. the proportion of 1:40 is selected.
  • There is one brand, but there is no information about the ratio of substances on the oil. they are divorced 1:40.
  • In the absence of any data on the saw and oil, the mixture is bred in a proportion of 1:40. The only thing you need to make sure that the oil is intended for two.stroke engines.

To carry out the run.in a new saw at the first three gas stations with fuel oil, add 20% more. In this case, instead of a ratio of 1:50, it will be 1:42, and the proportion 1:40 turns at 1:33. 24 or 33 ml of oil, respectively, will require a liter of gasoline.

Other countless events with a new saw do not conduct. Manufacturers advise working only at the largest speeds always. After the instrument run, the usual proportions are used 1:50 or 1:40.

In some cases, the manufacturer of the equipment also indicates other ratios, for example, 1:25 or 1:32, they must be observed.

What gasoline to fill in a chainsaw?

According to experts, you should use unhealthy gasoline obtained when adding additives without leading lead, the octane number of which exceeds 90.

For foreign models, it is necessary to fill in gasoline of higher brands and use branded oil manufacturers. The fuel of the AI-92 brand is considered perfect. How to breed gasoline for the Stihl 180 chainsaw? In this case, implies oils in mixtures 1:40.

AI-95 fuel is quite suitable for her, but according to professionals, it is better not to use for chainsaws.

The fact is that it is made on the basis of AI-92 using certain additives that change the quality of fuel.

These components are deposited on the internal parts of the tool and when the critical mass is reached, they begin to exfoliate, violating the operation of the mechanism. The best option is to follow the instructions that are attached to the selected model.

It is recommended to use gasoline, because with prolonged storage in containers, octane properties are lost.

Stihl chainsaws: what oil for gasoline to use?

A number of manufacturers producing equipment also produce their consumables that are adapted to the operation of a particular engine. So StiHL produces oil exclusively for its technique.

It is equipped with special additives that can compensate for the quality of fuel, improving the lubricant and purification of the fuel mixture. It should be noted that Husqvarna HP oil is universal and can be used for any chainsaw.

It can be used at a temperature not lower.10 degrees.

And also for two-stroke engines, the products of the following brands are used: Sadko, Kraissmann, Oleo-Mac Prosint.

If you use the stihl chainsaw, how much oil per liter of gasoline must be poured? The ratio will be 25 ml of additive per liter of fuel. It must be remembered that there are oils for chains and motors.

They are intended for different purposes and are not interchangeable. The use of chain oil for the preparation of a fuel and lubricants leads to a breakdown of the tool.

What brand to use motor oil?

For each model, the manufacturer advises a list of materials that need to be used.

It is better to adhere to these recommendations to the user, because the warranty does not apply to a tool for the tool due to the inappropriate fuel and lubric material.

In this case, the owner himself pays for the repair of the chainsaw, which can be up to 80% of its cost. When it is not possible to fulfill the recommendations of the manufacturer, try to follow the following rules:

Characteristics of the chainsaw

Each chainsaw has three main elements that ensure its operation. These include a 2-pin carburetor engine and two tanks. The fuel mixture is poured into one, the oil required for the lubrication of the chain is poured into the other. The volume of the fuel tank is 0.25 liters, which allows you to work without stopping 45–55 minutes. The volume of oil. less than twice. With this ratio of volumes, the contents of both tanks ends almost simultaneously.

During the operation of 2-stroke engines, the oil pumps system are not used, so for the stihl chainsaw oil in gasoline for lubrication of the shaft, piston and other rubbing parts have to be added. Attempts to work on one gasoline or non-compliance with the proportions indicated in the instructions for compiling a fuel and lubricant mixture from two components lead to a breakdown of the tool.

STIHL ms 180. technical specifications

STIHL MS 180 chainsaw is released by solid technical parameters. They include:

  • Power. 2 l. With.;
  • Fuel tank capacity. 270 ml;
  • The capacity of the tank for pouring oil is 260 ml;
  • the possible length of the tire used for operation is 30–35 cm;
  • Chain step. 3/8 “
  • Mald mass. 4 kg.

Among the advantages of the model, modest fuel consumption should be noted. When working under maximum loads, the motor consumes no more than 2.9 l/mash. hour.

The choice of oil

Unlike four.stroke engines, STIHL 180 chainsaw oil is poured directly into the gas tank, having previously mixed with gasoline. It is recommended to pour the oil specified in the instructions for this model in the chainsaw.

Chapter 7: Fueling Your STIHL Chainsaw

In no case can you use oil intended for low.speed engines (boats, scooters, etc. D.).

It can significantly reduce the life of the motor, and if traces of such a substance in the cylinder-piston group are detected, the tool will be considered removed from the guarantee, t. e. will not be subject to warranty repair or exchange.

Synthetic and mineral oil oils for chainsaws STIHL are sold in bottles or cans of different containers: from 100 ml to 5 liters. Minerals have a lower cost, and semi.synthetic and synthetic provide complete combustion in the process of engine operation, t. e. lack of soot and a minimum of toxic compounds in the exhaust.

In addition, synthetic oils retain their qualities in a much wider temperature range, as well as contain special additives that are useful for engine operation: anti.orally, detergents, cannibal, etc. D.

You can choose motor oil for your tasks depending on the model of the saw and the frequency of its use: the oil consumption during the operation of the device is low, and given the shelf life of semi.synthetic and mineral lubricants, there is a risk of simply not having time to use even a liter bottle to the end.

So with small alleged volumes of work, you can not buy a voluminous canister, but limit yourself to a bottle. The expiration date does not have only mineral lubricants of Stihl.

stihl, dilute, gasoline, butter, much, liter

Let’s talk about the installation of oil supply directly to the chain

First of all, I would like to put Accent on the fact that all the STIHL manufacturer’s chainsaws have quite small sizes, but, nevertheless, they are very powerful. It is these features that attract potential buyers of this kind of technology to the models of this company. over, you can easily produce various kinds of manipulations with this device regarding work with wood (see. how to cut down a tree).

Device for supplying oil to the circuit

In addition, Stihl chainsaws have a high level of cutting ability. over, this technique is equipped with the latest accessories (see.Nazadka for the chainsaw angular grinding) is additional due to which they contribute to convenience and ease of work. But actually let’s talk directly about the device itself, which the manufacturer has equipped with his chainsaws. So, the system of direct chain lubrication of the Stihl chainsaw consists of:

It is worth noting that the direct oil feed through the operation of the pump has a special adjustment. An important fact is that the chain is lubricated throughout the work of the chainsaw. It is for this reason that this part serves its owner for a rather long time.

During the operation of the device from the groove groove, the oil begins to exit directly and is immediately absorbed by sawdust.

That is why the process of lubrication of the chain area is carried out automatically. But it is worth noting that there are models that have the so.called “dosage” of oil, which should be supplied directly to the chain. And naturally models, the price category of which is quite low, are located only by a manual pump directly through the impact of the drive, which is located on the handle.

Advantages and disadvantages of oil

Any high.quality machine oil has its advantages and disadvantages of any high.quality machine oil have their pros and cons of. Some experts say that any chainsaw oil is suitable for any. This is not entirely true, almost any substance can be used for Hursstavna chainsaw, but only transmission oil is required for the StiHL chainsaw. When choosing, you need to know the Oil Cauline, a two.stroke engine requires a composition that has a reddish, bluish or greenish tide.

To make a mixture yourself, it is required to use heat.resistant lubricant, which has a well.known trademark.

The seasonality affects the density of the product:

What are the features of different oils, you can find out carefully by studying the label on the container. In the absence of instructions or labels on the package, you should refuse to use such a substance. At the same time, the TTX of the oil should not radically change when the temperature modes are dropped.

The specificity of the lubricant is that it is optimal for high speed engines, which have air cooling. It is such power plants that are equipped with chainsaws. Mineral oils have a reddish tint, and “synthetics” has a greenish tint.

You should not use any substitutes, often among them are counterfeit products (up to 20%). It is quite difficult to distinguish a fake, it is required to have specially equipment.

It is recommended to store fuel in metal containers. It is best to cook the fuel mixture in the canister.

There are a large number of oils and each has its own characteristics

The consistency is made in the ratio:

There are almost completely no chainsaws on the market, which function on the mixture in a ratio of 25: 1. After pouring a new mixture, the tool should work for a while at idle.

TTX of mineral or organic oil intended for the chain itself are not suitable for preparing the fuel mixture. The reservoir (up to half) is filled with the finished product, then mixed (the container must be hermetically closed). Thus, a uniform composition is obtained. It is better not to cook fuel ahead of time, it quickly loses its functional properties. At room temperature, the combustible liquid deteriorates for two weeks.

Fuel mixture

To prepare fuel correctly, you will need a list of additional tools:

  • Plastic or metal container for breeding a substance;
  • Measured bottle for gasoline;
  • Dispenser;
  • Syringe;
  • Lake for filling the tank of the chainsaw.

Some manufacturers, such as STIHL, immediately make measured containers for a more convenient measurement of the fuel mixture.

Different manufacturers produce oils of different shades. HP manufacturer produces red liquid. Green oil is a premium segment “Synthetics”. For the Husqvarna chainsaw, you need to take the oil of the corresponding brand. It is distinguished by high cost, good quality and has green or blue.

The main thing is to correctly calculate the proportions of the mixture. Excess oil can form soot on pistons and candles. Excess gasoline can cause engine breakdown or the formation of a backbone on the pistons. Each manufacturer gives its own proportions to models of different capacities.

To mix the components, you will need the above additional accessories. You can also find special canists with two openings for oil and gasoline on sale. Everything is very simple here, pour the ingredients, tightly twist the lid and mix, by inclining the container. You can use glass and plastic bottles.

Water or dust should not fall into the fuel mixture.

We deal with the choice of gasoline for the AI-92 or AI-95 lawn mower

How many people, so many opinions, which applies not only to the choice of oil for a trimmer for grass, but also gasoline. Similarly, in order not to make a mistake with the choice, it is recommended to use gasoline of the brand that the manufacturer recommends (indicated in the manual to the tool). However, not everything is so simple here, since at each gas station of the gasoline brand they are only called the same, but have a completely different composition. It is required to figure it out, and come to a single conclusion about which brand it is better to pour gasoline into a two.stroke engine for your trimmer for grass.

Manufacturers recommend using A-92 gasoline for their technique, and some models require the use of the A-95 brand that do not contain ethyl alcohol. It is not recommended to use gasoline of the AI-90 brand and below, as they will entail the rapid wear of engine parts. Buying gasoline of one brand, one cannot be 100% sure that it is true. The result is the following picture:

  • The manufacturer recommends pouring fuel into a trimmer for the grass of the AI-92 brand
  • The summer resident uses only gasoline of this brand, but buys it at gas stations, where the price is lower or where you have to
  • This negatively affects the internal details of the motor, since at one gas station it is really high-quality AI-92 gasoline, and at the second, at best, if it is AI-80, not AI-76

As a result, the engine suffers, and after a couple of years of operation a new trimmer for the grass, it is necessary. In order not to analyze the quality of fuel or buy only expensive gasoline, it is recommended to refuel only at one gas station. At gas stations, gasoline is poured only into metal canists, not plastic.

There are manufacturers that produce special cleaned fuel for two.stroke engines. If this option is selected, then you will not need to choose the best gas station, a brand of gasoline and control its storage periods.

Oil for two.stroke chainsaw engines

Modern garden chain saws can be pre-equipped with 2- and 4-stroke power units. The engines of these two types are slightly different in terms of action and the scheme for using the added lubricant material. In powerful gross chainsaws with a 4-stroke ICE, the engine crooked-shawl is lubricated with oil, which is in the crankcase of the factory motor during the active operation of the gas tools. In 2-stroke factory ICE, the lubricant comes from gasoline directly to the cavity located under the standard piston-it is there that there is a crooked-shaped group equipped with a pair of bushings and bearings requiring continuous lubricant. That is why in the gasoline used for refueling for 2-stroke factory ICE you need to add motor oil.

In order to accurately choose a specific lubricant for the continuously rubbing parts of the power supply of the chainsaw, its owner must study the most important properties of the material:

  • The volumes of the resulting ash. during the combustion of gasoline, the exhaust gas vapors appear, and when combustion of oil. ash and tarry deposits. They accumulate on the walls of the cylinder and the piston, which makes it difficult to make its unhindered movement up and down. Some manufacturers do not guarantee sufficient grease combustion, however, branded products are almost completely burned;
  • The level of purification from extraneous impurities. in the composition of oils, may contain not only useful additives, but also harmful substances. A lubricant is considered high.quality, in which the percentage of harmful components will be minimal;
  • anti.dimensional, anti.corrosion and continuously lubricating properties. the oil should cover the rubbing parts of the power unit with a thin film, thereby protecting them from increased wear, heating and exposure to rust.

When developing lubricants to maintain the operation of 2-stroke engines, manufacturers are guided by 2 standard: 2T and TC-W3. The second type of oil is used for operation in standard engines equipped with liquid cooling. such an internal combustion engine is equipped with hydraulic cycers and boat engines. 2T standard oils are used mainly for lubricating engines with constant air cooling. chainsaws, trimmers and other types of household appliances.

In the market, oils of such brands are the most popular among experienced gardeners and rollers:

Husqvarna. This Swedish manufacturer never saves on quality. Direct evidence of this is not only a proprietary garden technique, but also high.quality products for lubricating its parts. The oil of this brand. Husqvarna HP. contains a large number of additives aimed at stabilizing the work of the internal combustion engine. This oil is produced on a carefully prepared semi.synthetic basis and has substances that reliably protect the power unit from corrosion and increased wear. During continuous operation, the lubrication of the Swedish manufacturer burns almost completely, forming minimal volumes of ash;

stihl, dilute, gasoline, butter, much, liter
  • STIHL is the most famous brand manufacturer of garden technology. The lubricants of this brand have a balanced company composition, which contains all the required additives. STIHL HP oils can work properly during the operation of the saw at temperatures to.10⁰C;
  • Partner-oils of this manufacturer of chainsaws are compatible with all 2-stroke power units. They are distinguished by increased lubricants, high m of anti.corrosion and anti.intelligent additives, as well as the ability to work stably at temperatures before.15⁰C.

When choosing oil for 2-stroke chainsaw engines, it is important to pay attention to its expiration date. The gardener should alert the manufacturer’s marks that the terms of the operation of its lubricant can be 3-5 years or more. After all, the additives contained in the oil have a tendency to evapon and loss of basic working properties

As a rule, well.known brands are advised to use their lubricants for 6-12 months, since after this time the oil becomes unusable

After all, the additives contained in the oil have a tendency to evapon and loss of basic working properties. As a rule, well.known brands are advised to use their lubricants for 6-12 months, since after this time the oil becomes unusable.

What else is important to know about the use of gasoline?

With the completion of the summer season, you need to completely free the Lighting Military municipal bore from the fuel. This is due to the fact that during wintering the remnants of gasoline incorporate moisture and in every possible way reduce their readiness for ignition. In other words, if unused fuel is not drained from the tank, then in the spring difficulties may appear with the launch of technology. In order to fulfill this requirement, before winter conservation, you must finally let the lawn mower to the last drop of “blood” should be worked out. the moment when the engine itself stalls.

Do not use fuel, which is stored for a long time, especially not hermetic. The old fuel is eliminated and absorbs moisture from the air, so the octane number is reduced. It is better not to use gasoline for refueling, which was stored in the canister for more than a year.

Finally, if you always use only the type of fuel recommended by Stihl, then the resource laid down in the motor will be spent very economically. STIHL’s lawn mower in this case will last not only during the warranty period, but for many years and even decades.

Stihl chainsaws: what oil for gasoline to use?

A number of manufacturers producing equipment also produce their consumables that are adapted to the operation of a particular engine. So StiHL produces oil exclusively for its technique. It is equipped with special additives that can compensate for the quality of fuel, improving the lubricant and purification of the fuel mixture. It should be noted that Husqvarna HP oil is universal and can be used for any chainsaw. It can be used at a temperature not lower.10 degrees.

And also for two-stroke engines, the products of the following brands are used: Sadko, Kraissmann, Oleo-Mac Prosint. If you use the stihl chainsaw, how much oil per liter of gasoline must be poured? The ratio will be 25 ml of additive per liter of fuel. It must be remembered that there are oils for chains and motors. They are intended for different purposes and are not interchangeable. The use of chain oil for the preparation of a fuel and lubricants leads to a breakdown of the tool.

Caution. falsifier!

Small private companies from China and other Asian countries specialize in the production of motor oils, which are at a lower cost are sold in markets under the trademark of leading manufacturers.

  • Characteristics of fake products are an order of magnitude lower than branded originals. The constant use of the falsifier negatively affects the work of the chainsaw and the durability of its operation.
  • Only an experienced specialist can determine the status and quality of oil, so you can avoid possible risks by buying supplies in the network of company and licensed retail outlets.
  • The use of non-inforiate lubricants for service specialists is a legal basis for depriving the owner of a faulty saw of warranty repair and restoration obligations.

Fuel mixture: proportion of oil and gasoline for a chainsaw

The combustible mixture for such a motor tool as a chainsaw is prepared from two components: Oils and gasoline. The chainsaws today are equipped with only 2-tact engines, this design makes us mix two liquid components directly manually. We offer to make out how to do it right and why you need to do it!

  • Why do you need to mix oil and gasoline
  • Ratio in proportions
  • How and how much to store the fuel mixture
  • Service after work

Why do you need to mix oil and gasoline

Of course, yes, it would be attempt to rid lovers of motor tools from this routine work, for example, 4x-tact models of chainsaws, for example, STIHL and Shindaiwa stubbornly achieved this. But alas, their They did not receive creations big popularity Due to bulky and problems with the oil distributor in maneuvers and work at an angle.

Therefore, it is very important to adhere to the correct proportions of gasoline and oil so that the only 2x-tact engine of the chainsaw can work out as long as possible. Also, in no case should you allow working on clean gasoline, otherwise you will “kill” a motor tool !

When the moment of buying oil is suitable, it is necessary to clearly understand its purpose. Among folk methods to save there is a legend, that oils from boat motorcycles and scooters perfectly replace the original. Alas, this is not the case. Bought oil should be intended only for two-stroke engines of garden technology. This is also important because with warranty repairs associated with the failure of the engine, it largely plays the role of the used oil. In connection with the use of non-original, the chainsaw may lose a guarantee due to non-compliance with proper operation measures.

If we talk about gasoline itself, then the best choice will be the use of fuel with an octane number not lower than the A-95. Do not save on the quality of the fuel for the chainsaw, because for work it needs and not so much. Let foreign manufacturers and allow use A-92 or A-90, But alas In our country, they are very inferior to European analogues. Using gasoline with a smaller octane number, you run the risk of clogging the engine with all kinds of small garbage present in a combustible. Subsequently the engine cannot be repaired.

Ratio in proportions

As for the ratio of the fuel and lumber mixture, everything is easy: it is necessary to follow the instructions attached to the motor tool. We will sign everything in a more affordable form.

Often, the most famous manufacturers (Stihl, Husquarna and T.D.) indicate the required number of components in the manual for use or in the chainsaw passport. The most popular proportion is 1:40 or 1:50, what does it mean for 1 part of the oil you need 40 (50) parts of gasoline. If in liters, then this turns out: per unit we take 1l (1000 ml) of gasoline, divide by 40 (50) and get = 25 (20) ml of oil. It turns out that for 1 liter of fuel it takes only 25 (20) milliliters of oil or abbreviated. 1:40 (50).

If we talk about the chainsaws of the budget line of any Chinese manufacturer, then the situation is different. In models called “M ade in china” It is required to use the proportion of 1:25, t.e. per 1 liter of gasoline of 40 milliliters of oil. Such a large use of oil in comparison with original saws is that in branded motorcies are always high.quality assembly, Naturally, the distance between the piston/cylinder is an order of magnitude less than in Chinese models. Therefore, the chainsaws of “Cevern” requires a larger amount of oil to compensate for the low quality of the main elements of the model.

stihl, dilute, gasoline, butter, much, liter

How and how much to store the fuel mixture

We want to tell one secret. If you are going to prepare for the future, fuel and lubricant mixture for chainsaws, then in the container be sure to fill the gasoline first at first, and only then add oil. Having done the opposite, the oil can simply stick to the bottom and not mix with the fuel.

It is also important to remember that you can never knead the fuel mixture directly in the tank of the chainsaw, always use a separate container for this.

To properly store cooked mixtures, we recommend Use metal canists, you can not use plastic bottles, t.to. gasoline will gradually react with plastic and saturated with slags. It is believed that the optimal shelf life is from 7 to 10 days in a dry and dark place.

This is due to the fact that Modern oils have ceased to be synthetic, Now oils of organic origin are sold everywhere, favorably affecting the work of the motor tool, but here not without flaws. Due to its “organics”, the shelf life in mixed with gasoline is no more than 10 days. After this period, physical properties to lubrication are lost and the mixture ceases to be effective. Use can be fraught with a breakdown of a chainsaw.

Service after work

At the end of the work, it is necessary to drain the fuel mixture and conduct a short start of the engine in order to dry the carburetor, after which you can leave it until the next operation session.

Interesting fact! The first chainsaw in the world was created approximately in 1920 by the German designer Andreas STIHL.

Electrician or gasoline. which is better? We are sure that this is not an unambiguous question, which you can answer only by weighing all the pros and cons for some particular area, for example gardening. This is what we will do today!

Calendar spring is no longer around the corner. The sun appears more and more often, gradually removing the remaining layer of snow and ice from the ground. If you are a gardener, then it’s time to put on gloves, and picking up a rake to clean your garden.

What manufacturers recommend?

In the photo above the oil that I use to refuel my tools. If you look from the back, then the label has information about the preparation of the fuel mixture, but it is quite blurry.

The proportion can be from 1:25 to 1:50 depending on the operating conditions and the recommendations of the tool manufacturer. Good, it means before preparing the fuel mixture for my mower I have to see the proportion in the instructions.

I have a Chinese braid, as well as many, I open a document and see the following.

Oh how. The manufacturer of my mowing sends to watch the proportion on the oil label. In general, everything is as always, some veiledly recommend using only their own road for it. This is what STIHL does.

Others generally relieve themselves of all responsibility shifting it to the manufacturer of the tool, as in the case of my mowing.

What will happen if you do not take into account the recommendations

An inexperienced person does not know how to dilute gasoline with butter, how to choose the right fuel, what proportion of gasoline, and many other nuances. Often, such ignorance leads to the emergence of a large number of problems in the operation of the equipment:

  • increase in fuel consumption;
  • defects of the unit and its components;
  • the appearance of extraneous noise;
  • strong toxic exhaust and t.D.

Therefore, experts recommend adhere to tips related to all aspects of the equipment, starting from how to choose the right fuel, ending with how to dilute gasoline for the chainsaw.

| Denial of responsibility | Contacts |RSS