drilling, crown, crowns

Peorator for drilling

Peorators, which today are actively used in the implementation of construction and repair work, allow you to obtain holes in various materials due to not only rotational, but also the reciprocating motion of the tool used. When choosing a drill for a pedorator, it should be borne in mind that the effectiveness of the processing is largely dependent on their characteristics.

The electromagnetic or pneumatic mechanism is responsible for the formation of a shock impulse in the structure of the peorator, and the movement of the tool in the opposite direction occurs due to the elasticity of the processed material. When choosing a peorator, you should pay attention to the two main parameters of such equipment: to the performance of its electric motor, measured in watts, as well as on the power of the shock load (in Joules), which he is able to create. The characteristics of modern peorators allow you to successfully use this equipment for processing strong materials such as concrete, natural and artificial stone, brick, etc.

Features of the choice of diamond cylinders by concrete

Crowned drills in their external parameters are similar to previous steel analogues. The installation also has the form of a metal cylinder, in which one edge is represented by cutting elements, and the other with a shank for attaching to the tool acting as a drive.

These are the most popular tools for drilling several holes in your home

Features of the choice of diamond cylinders by concrete are due to the differences in the type of drumber of the drill and the type of tool.

A piercing crown for a peorator has a cylindrical shank or SDS. The device designed for a drill is equipped with a multifaceted or cylindrical shank. Coroned drill for drilling holes under the outlet can have one and another type of shank.

Strength and frequency of impacts

The impact force affects what density the material will “take” the device and what size the holes can drill. Conditionally, all models can be divided into three classes by impact power:

The lungs are suitable for simple drilling and chopping, for example, for the installation of drywall or outdoor insulation. The average will come in handy when you need to extort niches in the wall or make holes for sockets. Heavy are more applicable at construction sites for the detection of brick and concrete of increased strength.

The frequency of impacts depends directly on the power of the device. The more powerful, the less blows per minute it makes. That is, roughly speaking, one blow of a powerful device gives out the same strength as several blows of a weak peorator. The lower the number of shocks per minute, the less wear will be the device.

TOP-5 best peorators up to 5000

The TOP of the 2019-2020 peorators included economy class models. They have small power, a simple type of control. Before choosing which pedulator to buy for a house inexpensively, the functionality, design, ease of use and cost were studied.

Elitech P0724REM Promo, 750 W

The tool can drill and hammer, perform the functions of an electric screwdriver and reverse. Of the features: blocking the inclusion button, adjusting the speed of rotation, fixing the spindle. The kit includes a drilling depth limiter, an additional handle, case.

Type of cartridge-SDS-Plus;

Food. From the network;

Max. Drilling diameter (wood). 30 mm;

Max. Drilling diameter (metal). 12 mm;

Max. Drilling diameter (concrete). 24 mm;

Max. The number of revolutions of the idle. 1700 rpm;

Max. Frequency of strikes. 6100 beats/min;

Weight. 2.7 kg.

Bort BHD-700-P, 700 W

Horizontal peorator processes concrete, brick, stone and wood. It works in 3 modes: D some, drilling, drilling with a blow. Additionally there is a function of an electric screwdriver. Equipped with a plastic pen with a limiter and a special coating, so it does not slip in the hand. There is a rotation frequency adjustment, spindle fixation, button button lock. Supplied with a drilling depth limiter, an additional handle and a set of brushes.

See also  How to make a hole in plastic without a drill

Type of cartridge-SDS-Plus;

Food. From the network;

Max. Drilling diameter (wood). 30 mm;

Max. Drilling diameter (metal). 13 mm;

Max. Drilling diameter (concrete). 24 mm;

Max. The number of revolutions of the idle. 1050 rpm;

Max. Shock frequency. 4850 beats/min;

Weight. 2.85 kg.

Caliber EP-800, 800 W

Model with work modes: hit, drilling and drilling with a blow. Can perform a reverse. There is a rotation frequency adjustment, blocking button, fixing the spindle. The kit includes a drilling depth limiter and an additional handle. Packed in the case.

Type of cartridge-SDS-Plus;

Food. From the network;

Max. Drilling diameter (wood). 30 mm;

Max. Drilling diameter (metal). 13 mm;

Max. Drilling diameter (concrete). 26 mm;

Max. The number of revolutions of the idle. 1300 rpm;

Max. Shock frequency. 5500 beats/min;

Weight. 3.7 kg.

Vorthy P-800k, 800 W

The tool can drill, hammer and perform these two functions together. Additionally there is an option of reverse. Of the features, the presence of: blocking the button of turning on, fixing the spindle, adjusting the speed of rotation. The kit contains a drilling depth limiter. Additional handle, case.

Type of cartridge-SDS-Plus;

Food. From the network;

Max. Drilling diameter (wood). 40 mm;

Max. Drilling diameter (metal). 13 mm;

Max. Drilling diameter (concrete). 26 mm;

Max. The number of revolutions of the idle. 1100 rpm;

Max. Shock frequency. 5200 beats/min;

Weight. 3 kg.

Interskol P-22/620ER, 620 W

The device performs drilling and drilling with a blow. There is an option of reverse. You can block the start button, adjust the speed of rotation. There is a safety coupling. Supplied in a case with a drilling depth and an additional pen limiter.

Type of cartridge-SDS-Plus;

Food. From the network;

Max. Drilling diameter (wood). 30 mm;

Max. Drilling diameter (metal). 13 mm;

Max. Drilling diameter (concrete). 22 mm;

Max. The number of revolutions of the idle. 1100 rpm;

Max. Shock frequency. 5060 beats/min;

Weight. 2.5 kg.

We drill a concrete wall crown

It is necessary to work extremely carefully, for starters, we very quietly drill the first 5 mm walls at extremely low speeds, this is necessary so that we will not go aside in the future process, and the hole is not a curve. Further, we continue to work, you should not compress the peorator much, because making the hole should occur exclusively due to the rotational movements of the head. If there is a need to increase the initial diameter, then you can resort to simple manipulations with swaying, this will slightly expand the hole. If you keep the peorator in the direct position, then there is a chance that the diameter will be a little already.

But do not be zealous, after a couple of minutes of active work it is worth taking out the crown, look at its condition and let cool with the tool with a nozzle. From increased load, the tail can just burst. Before you remove the peorator, do not stop its work completely, this will exclude the possibility of damage to the win.

Next, take a hammer, and a good chisel, then insert the chisel into the lower part of the rejection done, hit. It is necessary to drive a chisel by about 2 mm. This will help you extract everything that remains inside in the process of drilling, and was compressed in the hole. You need to work carefully so as not to accidentally expand the necessary diameter.

Thus, gradually increasing the pace, it is necessary to make the necessary hole in the concrete wall, but if you have a reinforcement in the wall, then the entire procedure should be carried out similarly to the described, but only on condition that the winning crown will need to be replaced with diamond. But the diamond should be constantly watered with water to simplify the work, but do not water the boat itself.

After the end of the work, we completely clean the holes from dust, and dirt. We collect the entire tool, and you can proceed to the installation of the necessary equipment in the wall.

It is worth adding, you just got full instructions for action from a professional builder. And now you know how to choose a crown precisely for your needs, and you can also do all the work yourself without involving third parties to this.

See also  Drilling holes in concrete for sockets

drilling, crown, crowns

Drill a dozen holes for the dowel in a concrete slab? Yes, this can be done with a shock drill. Spending a lot of strength, time and not forgetting to constantly cool the drill. Or you can take a penicrator and spend on everything about all about three minutes.

CROWN. Обучение, выставки и тд

And if the holes do not need a dozen, but more; It is required to draw a penalty on the wall (a groove for hidden cable laying) or install a socket in the wall. You can’t do without a peorator.

Types of crowns by concrete

Contrary to a common misconception, the price of a concrete crown for sockets on the diameter does not depend much. The cutting teeth are made of which material is made of what material is made of.

Winning crowns in concrete

Wins. This is a group of solid alloys produced by sintering powder from tungsten carbide powder. The teeth of this material are soldered along the cutting edge and are well able to cope with concrete with the shock method of drilling. The winning crown for concrete “SDS Max” can have a diameter of 20 mm to 100 mm.

Important! Wins is poorly treated with temperature fluctuations. Therefore, drilling holes is recommended in dry mode.

The winning instrument refers to the budget class. Its main disadvantage is a high risk of teeth loss in a collision with a reinforcing rod in concrete. Stopping a crown with winning attacks is worth those who are looking for a tool for one.Time use.

Carbid-wolframa crowns in concrete

The cutting edge of this class is reinforced with a continuous spraying of the tungsten carbide powder. The purpose of such an instrument is unstressed drilling. The crown is able to easily cope with brick, ceramic tiles, therefore it is indispensable when installing a socket on a wall lined with tiles. Crings can be sold in a piece or in the form of a set, when glasses of different diameters can be attached to one shank.

It is interesting! Most often, buying a set is more profitable than looking for carbide-wolframic crowns.

The main drawback of this type is extremely low survivability in a collision with metal. It is enough to stumble upon a reinforcing rod once so that the crown is out of order.

Diamond crowns to drill concrete

Another version of the tool for unstressed concrete drill is diamond concrete crowns for sockets. They can be used both in dry mode and when moisturizing with water. The edge of such a crown is divided into several segments, diamond dust or small crumbs are applied to it.

Dental Crowns: Purpose, Types, Procedure and Care

Diamond drill tools have a number of advantages:

  • They are not afraid of meeting metal. Therefore, in reinforced concrete, you can make a hole only with an instrument of this type;
  • There are many models with various diameters on sale;
  • The quality of the resulting hole is very high: almost no chips, cracks and other surface defects are formed;
  • Long service life.

The main drawback of this type is high

Peorator for drilling a crown concrete

Need a pe., drill holes in concrete at home under installation boxes for sockets. What are the minimum technical requirements to present this device? Is it possible to meet 3,000 ?

It is not necessary to drill a crown because you can smear a glass for 3000, you can even free.

Lomaster wrote: You can even free.

You see a little bad, I asked a question about the peorator

Kotopes, I understood the ATP, you need to look in the technician maximum holes for which it is designed. And how to use the crown? The price of course matters

Zeher wrote: you need to look in the technician maximum holes for which it is calculated.

Zeher wrote: Kotopes, the ATP understood, we must look in the technician maximum holes for which he is calculated. And how to use the crown? The price of course matters

Yes, there’s nothing to do with the crown, what kind of concrete you think you can take an inexpensive one like Encore and carefully do it. It’s at home, drill a little to the vernch

And what to do with the reinforcement that can get into the drilling area?

I have a panel house. There are plates like a thick 5 cm

Zeher wrote: I have a panel house. There are plates like a thick 5 cm

See also  How to make a grinding wheel for a drill

We can? What to fence the garden

There is no then anything you will stick, nor the table in the dense or move or TV on the wall. And I don’t like overheads.

Zeher wrote: Yes, and I don’t like overheads.

With such walls, to fall to the neighbors, to spit once. The depth of the socket from 40mm.

KVOST wrote: with such walls to the neighbors to fall, spit once

So this is only my stove. The neighbors have their own. And between a nim emptiness centimeters 5. Maybe more.

Zeher wrote: is it possible to meet 3,000 ?

One normal concrete crown costs from 2000 rubles. Pek universal Bosch 2-26 about 7000, but this is a professional tool

Zeher wrote: Between Nima, a void of centimeters 5. Maybe more.

Yura T wrote: One normal crown on concrete costs from 2000 rubles.

Well, in general yes. Only I would not be shocking such walls, but with a diamond crown I drowned with a conventional drill. Just about 2000 and stands “

And I was dried up for 500r diamond. Only she was 65mm, was too lazy to go to the store. )

Tipchic wrote: And I was dried up for 500r diamond.

And what, I would also take for 500, feel the teszet)

But just take the pies and drill at 6 and 10 and hang up and hire, I hope the vehicle does not need to do more than 10 pieces? 2 drills and scapula and Chinese will go plus P-26 or something like that

Alteration of charging devices and not only

Anat78 wrote: And just take the pies and drill at 6 and 10 and hang up and hire

You have entertainment, and I only found in one place in the city to make the tiles.

Tipchic wrote: And I was dried up for 500r diamond.

Show this? (I haven’t seen such a cheap diamond, there are discs, but there are no crowns)

Well, in general yes. Only I would not be shocking such walls, but with a diamond crown I drowned with a conventional drill. Just about 2000 and stands “

Here it is! And I wondered what kind of crown I had! Very chewing, by the way.

Tipchic wrote: Take. I think you will have cheaper.

Tipchic wrote: you have entertainment, but I only found in one place in the city to make the tiles.

Above and under the tile this is a thought. Here I needed a porcelain tile to the taps of the PS, but to introduce a socket, and nothing.

Yes, the discs even in 170re in Lero Norton lie, but somehow it did not work out with the crowns

Gold_eggs wrote: Here it is! And I wondered what kind of crown I had! Very chewing, by the way.

You, I supposedly jumped there, too, too for 500 ra?

1 place. Metabo Uhev 2860-2 Quick 600713500

The best network shock peorator for professional work is equipped with a two.Speed gearbox and an anti.Vibration system that is strongly reducing the load during use. The engine will last a long time due to a high degree of protection against dust and damage. Metabo Uhev 2860-2 is designed for intensive use at home or professional activities.

The case of durable rubberized plastic weighs 3.3 kg, but thanks to the right weight and pleasant ergonomics, you hardly feel this. The tool can maintain the speed you need, and it can be adjusted automatically. The special shape of the handle reduces the load on the brush during prolonged operation. You can not be afraid to work in dusty rooms due to multilayer protective windings and protection of switches.

A 1100 W electric engine creates an energy of hit 3.4 J. Up to 4,500 beats and up to 2100 revolutions are made per minute. Torque is limited to 18 nm. This power is enough to make a hole with a diameter of 35 mm in a tree, 13 mm in metal, 28 mm in concrete. The SDS cartridge is included and fast.Sounding for drilling. The speed of rotation adapts to the material, and when jaming the drill, the shaft and the coupling stops, which contributes to the safety of use. The network connection occurs with a 4-meter cable with fracture protection.

| Denial of responsibility | Contacts |RSS