What corner grinder does the tile cut better

For professional operation, iron discs with diamond spraying are used. The service life and quality of such equipment are dependent on the intensity of the spraying. The cost and reliability of this type of equipment is higher than the stone.

Corner grinding machine is a terrible and difficult to operate power tool. With non.Compliance with safety rules, you can, in the best case, spoil the material or consumable, break the tool, at worst. To apply severe injuries for yourself.

  • Be sure to put on personal protection funds. For cutting, an angular grinder will need a respirator for you so as not to inhale dust, glasses that protect eyes from small particles, also strong protective gloves and a special compacted shoes.
  • Make sure the tool is working. The working equipment should rotate exactly. Check if you fixed it firmly. If the circle is old and turned off, then we advise you to replace it. In an unpleasant case, the cutting element will simply split during operation. Make sure the casing is worn and oriented in your direction, and the cable (if you have a network tool) is not damaged.
  • Do not start work right away. When you just launched a corner grinder, wait until the disk is spinning, starting to give out a measured number of revolutions.
  • When developing a cut, lead an angular grinder from yourself.
  • Use working equipment suitable for material.

corner, grinder, does, tile, better, possible

Features of work with corner grinding

In the process of finishing, many people ask about whether it is possible to cut the tile of a corner grinder, since it will have to be faced with the problem of adjusting the size and shape of the tile, one will have to one way or another one way or another. There is an option to purchase a high.Quality professional tool and then the problem of how to cut off the tiles of a corner grinding, do not stand on the agenda at all, but such costs are not always justified, because if you are not going to work for them, then it will be dusty for years, slowly outdated and succumbing to corrosion.

In order to perform all the work with qualitatively and safely, a disk for corner grinder on the tile, fixed on the tool, must always be closed with a special protective casing. This will complicate the work somewhat, and the maneuverability of the device will be worse, but the fragments and dust will not fly in your face, and this is already a significant argument.

You can use improvised means in the manner of glass cutter, but if for a wall glazed tile, which has a small thickness, this option is suitable, then gross floor tiles, and even more so, creature, can hardly cut off them. The most affordable and simple way to cope with the problem is cutting tiles with a corner grinder, if it is in the household.

This is a unique device in general a real find for any home craftsman, since in addition to its direct function for grinding, with it you can cut metal, stone, tiles and much more. In order to cut the ceramic tiles of a corner grinder without chips and dust, you will have to purchase a special nozzle, as well as organize a good fixation of each tile so that it does not stagger and does not jump out.

Special nozzles: Cut the tiles with a corner grinder

Before starting work and finding out how to cut the tiles of a corner grinder without chips, you must definitely deal with all the nuances and subtleties, prepare everything you need. First of all, it is worth understanding a few simple recommendations, without which it will not work to organize your work correctly.

  • Tiles are cut with a corner grinding with a diamond circle for grinding, since any other materials cannot provide such efficiency and cleanliness of the cut as this nozzle. Coal grinder disk on ceramic tiles is better to change quite often, avoiding cutting with the remains or a damaged circle.
  • Choosing fine diamond spraying for dry pruning, it should be understood that the tool will be very dusty, but the cut will be clean and even.
  • If it is assumed that the corner grinder for cutting the tiles will be used for a long time, it is better to organize the wetting of the disk, in order to avoid strong overheating of the tool, which can lead to corruption. The water supply can be automated by withdrawing a small tube. It is easy to simply spray the disk out of the spray gun, and you can completely plunge it into a container with water.

How to Cut Tile Around Outlets (Easy Accurate Cuts!)

corner, grinder, does, tile, better, possible

Especially the angular grinder for the tile is not intended in any way, therefore, when working with such a device, all the necessary precautions should be observed. It will not prevent the quality of fastening of nozzles and disks, as well as to get working gloves and glasses regularly, a mask and a suit with fastening cuffs will not be superfluous.

Varieties of cutting disks

Corner grinder for tiles is used with cutting discs. They are classified as intended. The beginning master always arises the question of what circle to cut ceramic tiles.

Cutting the tile of a corner grinder is worth a circle with a diamond crumb. The disk is made of strong steel, and an abrasive coating of diamond crumbs is applied along its rim. The width of the abrasive coating varies from 1.5 to 3 mm.

In construction markets, you can find circles with diamond spraying of 3 types:

For “wet” cutting use a continuous disk. For dry. Segmented disk. Turbbo-Disk is universal. For cutting tiles with corner grinders, it is recommended to buy circles with yellow marking.

Corner grinder for tiles is used with cutting discs

What disks are cutting tiles

For cutting ceramics, special discs are needed, which can be stone or metal with diamond spraying. Stone is rarely used, as they are quite thick and quickly grind, and during operation they are very dusty. The cost of stone discs is many times less than metal, but experts prefer to work with the last.

Ceramic processing is preferable to produce continuous discs. When working with such disks, there is a time limit: they cannot be continuously cut more than 1-1.5 minutes. Then you should let go cool with a working corner grinder at idle.

Segmented are designed for cutting paving stones, porcelain tiles, natural stone or concrete.

corner, grinder, does, tile, better, possible

Segments are designed for better cooling of the tool during operation.

Types of cutting ceramic products

Unlike a plane cutter, an angular grinder allows you to perform different types of cutting. But in each case there are its own characteristics that need to pay attention to.

Straight cutting or straight cut

This standard method of cutting ceramic tiles. It involves the separation of the material into straight lines.

  • Initially, it is necessary to mark the fishing line for the trimmer of the cut. To do this, use a ruler and a marker.
  • Place the workpiece on the straight surface and remove all the excess.
  • Fix the tile with a vice.
  • Make the first incision to a depth of 1-5 mm, depending on the thickness of the material. When entering the tile, slow down and then increase.
  • The corner grinder needs to be carried out from itself, at the same speed, exactly.
  • When exiting the material, there should also be reduced speed to avoid chips.
  • Break the workpiece along the cut.
  • Stir the edges with equipment.

Important! When cutting, it is necessary to adhere to the selected trajectory as much as possible.

Curly cutting or figured neckline

This type of work is the most difficult. Therefore, it requires a certain dexterity for high.Quality execution.

  • Before cutting a corner grinder with a ceramic tile, you need to mark with a marker.
  • Put the tile on a flat surface, fix it.
  • Then make small vertical cuts, cutting off excess material.
  • At the end, unevenness will remain, which must be treated with an abrasive circle.

Cutting rectangular holes in the tile

In this case, you need to prepare a drill to make holes along the edge.

  • Apply the contours of the hole with a marker.
  • Fix the tile on a flat surface.
  • Drill make holes in the corners of the intended rectangle.
  • Corner grinder walk along the circuits of the intended rectangle.
  • Delete the inner part.
  • At the end, finalize the edges with an abrasive.

Cutting circles (round holes)

Before cutting the tile of the corner grinder, it is necessary to make the central hole drill. To do this, use a carbide drill, the diameter of which is within 3-4 mm.

  • Put a marker on the tile the central point of the circle.
  • Circulus to outline the contour.
  • Drill a hole at the central point.
  • Corner grinder make vertical serifs from the center to the outer edge of the circle crosswise.
  • Cut off excess material, clean the edges with an abrasive.

Cutting at an angle of 45 °

In order in this case to do qualitatively, you need to use a metal circle with diamond spraying.

How To Cut Porcelain Tiles by Hand with Grinder without Chipping. Testing Diamond Blades 4 Tiling

  • Apply a fishing line for a cutting trimmer at an angle of 45 degrees.
  • Fix the material as possible with the front side down.
  • Make the first cut of a corner grinder.
  • Repeat if necessary to improve the result.

Important! When a tile cut at an angle of 45 degrees, it is necessary not to reach the glaze of 1.5-2 mm, that is, cut only clay.

Safety precautions when operating an angle grinding machine

Corner grinding machine is a dangerous and difficult power tool in operation. If the safety rules are not observed, at best, you can ruin the material or consumable, break the tool, at worst. To inflict serious injuries to yourself.

  • Be sure to put on personal protective equipment. For cutting the angular grinder, a respirator will come in handy so as not to inhale the dust, glasses that protect the eyes from small particles, as well as strong protective gloves and special dense shoes.
  • Make sure the tool is working. The working equipment should rotate exactly. Check if you fixed it reliably. If the circle is old and turned off, then we recommend replacing it. Otherwise, the cutting element will simply split during operation. Make sure that the casing is worn and directed in your direction, and the cable (if you have a network tool) is not damaged.
  • Do not start work right away. When you just launched a corner grinder, wait until the disk is spinning, starting to give out a stable number of revolutions.
  • When creating a cut, lead an angular grinder from yourself.
  • Use working equipment suitable for material.

How to cut tiles with a corner grinder without chips and dust

In order to reduce the number of chips, adhere to such rules:

  • Cutting begins on the front side. Most of all chips are formed when the cutting disc is released from the material.
  • At the beginning and at the end of the passage, the speed of the disk is reduced.
  • Cutting is performed in one pass. With each additional passage, the number of chips increases.

The amount of dust is minimized as follows:

  • Cut only a shallow groove, then break the tile. When cutting the glazed dust coating, little is formed, almost all of it stands out when cutting the main array of tiles.
  • Serve water into the cutting zone, as described above.
  • Use a construction vacuum cleaner. To manage them will need an assistant.

Leading world manufacturers angular grinder (Bulgarian)

The production of this tool in demand by consumers is engaged in a large number of foreign and Russian companies. But Bosch, Germany and Hitachi, Makita. Japan, entered the leaders in technical characteristics, quality and price.

They mainly concentrate production on professional tools, with rotation speed, with a capacity of above 1200W, with discs of various diameters. Such grinders with a diamond disk are well cut into the strokes in concrete and brick walls for wiring, stone, marble or granite tiles. The presence of a shock.Absorbing system, electronic smooth start and side handle allows you to control the position of the machine without much effort, configure to work with various materials. Blocation of governing bodies in several modes ensures the safety of operation.

corner, grinder, does, tile, better, possible

The better to cut the tiles: a tile.Cutter or a corner grinder

If you are repairing bathrooms professionally, then buy a tile cutter. They are mechanical, electric, manual, machine.Like type. We recommend choosing based on the volume of work and conditions: electric tile cutting is not suitable for cutting in rooms with high humidity, the machine will be inconvenient to install in a limited space.

It makes sense to use corner grinder instead of a standard tile cutter: as a rule, for one or two rooms it is not required to cut a lot of material. It is also permissible to use the corner grinder as a side version: for example, when for some reason you do not use a tile, and the tool is needed now.

| Denial of responsibility | Contacts |RSS