The fishing line for the trimmer on the trimmer is torn

In most models of electroly and benzotrimmers, to replace the fishing line, you will need to remove the coil. Fubag tool allows you to skip this stage. For the instruction to be universal, we will still consider it in detail: 1.

Fix the shaft. Insert a stop element into the corresponding hole. They may be a thin screwdriver or a metal rod.

Unscrew the spool body. In our example. strictly in the direction clockwise.

Unscrew the lid in accordance with the direction indicated on the case.

The preparatory stage has been passed. You can go to the winding of the fishing line.

How to refuel a fishing line for a trimmer trimmer for grass?

So that the plot near the house always looks well.groomed and neat, it must be regularly cut. Fortunately, modern technology allows you to solve this problem without excessive physical efforts. Electric trimmers for the grass are so easy to manage and care that even a teenager can spit grass with their help. The main thing is to understand first how to tie a fishing line for a trimmer to a trimmer for grass.

How to charge a fishing line for a trimmer trimmer for grass?

So, we are faced with the task. correctly charge a fishing line for a trimmer to a trimmer for grass. Let’s figure out in more detail where to start its implementation and what pitfalls can expect us in the process.

At the very initial stage, you need to choose the right fishing line for a trimmer. Although at first glance, the whole fishing line sold in the market or in the store for a trimmer is not much different from each other, you should not buy it at random. In order not to make a mistake in choosing, it will not be superfluous to take with you a package from a spent fishing line or its small piece, or at least write a trimmer model for grass. An ideal option for almost all models of trimmers would be a fishing line for a trimmer with a thickness of 3-4 mm.

fishing, line, trimmer, head

To perform this operation, the trimmer for the grass must be disconnected from the network and turn upside down upwards. The further course of action depends on the model of the trimmer for the grass and the design of the coil itself:

  • In small trimmers with the lower location of the engine, click on the key coil located on the sides and remove its upper part from the head;
  • On trimmers with a bent rod, clamp the coil body with one hand, while turning counterclockwise the lamb located on the housing;
  • In trimmers with a straight bar and a gearbox, insert the screwdriver into the hole located under the coil, and then turn the body of the coil counterclockwise.

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on a already dedicated area, since there can be a spring inside the coil, which will be quite difficult to find in the high grass. After disassembly, we will have three parts in our hands: the case (upper cover), the protective casing and the coil itself.

Step 4. measure the required amount of fishing line

Kosil workers are usually interested in how many meters of fishing line are wrapped on a coil of a trimmer for grass? You can solve this issue in two ways:

In any case, after the winding ends, the fishing line of the fishing line should be on the body of the coil without slipping from it. No need to try to wind as much as possible, since the fishing line for the trimmer will be poorly unwound and more often break.

Step 5. wrap the fishing line for a trimmer to the coil

How to install a fishing line for a trimmer on a trimmer for grass depends on the design of the coil. Consider the option when the coil housing has one exit for a fishing line for a trimmer. In this case, the end of the fishing line is clamped in the crevice of the coil, and then wrap the fishing line for the trimmer, trying to lay the turns of the most tightly as possible. The direction of laying turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After the winding is completed, a protective casing must be put on the coil and remove the end of the fishing line into it

If the coil is designed to work with two tails, then the fishing line for the trimmer must be folded in half and lay in the groove in the central part of the coil. Further winding will be carried out one or two grooves, depending on the design of the coil. The direction of winding should also be the opposite direction of rotation of the coil. At the end of the tail of the fishing line, it will also be necessary to bring into the holes on the upper part of the coil.

Which line for a trimmer to choose

Before you stock up on this material for refueling in a trimmer for grass, you need to decide on the choice. After all, the usual so.called round fishing line for a trimmer is far from the only existing look. How to choose the most suitable? First you need to determine the working conditions.

Type choice. a line for a trimmer with a round section is the most common. It will suit any reels with the rarest exceptions. This type of consumable is suitable in order to mow fresh, juicy grass. But with the mowing of the so.called dryness, this kind may not cope anymore. It is pointless to mention attempts to mow shrubs and mention.

In addition to the usual type, there are others with sharp faces. Usually they are made by a “star” or “square”. The presence of sharp faces is the main feature and key difference between these threads.

It is thanks to this feature, the threads of such species are able to mow dry weeds. But the spicy threads are not devoid of disadvantages, the main of which can be called rapid wear and strength, markedly inferior to the round type.

In addition to the already mentioned types of forests, there are still interesting and often encountered varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. Threads of this type are often used in tools working on gasoline and having an engine more powerful than one and a half horsepower.

Threads with a metal core are both with a round section and with sharp faces. Regardless of the type of cross section, such threads are the best suited to overcome hard.to.stop plants. Threads related to this type easily mow not only dry grass, but even small shrubs.

The threads with wire inside are favorably different from other types of consumables for their incredible wear resistance. But unfortunately, this feature has a more than noticeable effect on the price of this type. The cost of threads with a core significantly exceeds the cost of threads of other types.

Choice in thickness

In addition, special attention should be paid to the thickness of the consumption material. For mowing young grass, a thread is suitable with a diameter of one and a half millimeters

The larger the diameter of the thread, the more dry and rude weeds it can overpower.

When choosing a fishing line in thickness, there is one “but”

It is important not only to evaluate the capabilities of the material, but also to take into account the features of the trimmer for the grass. You must definitely look into the user’s management, which is attached to the tool, and find information about the requirements for the cutting element

The use of inappropriate thread can lead to the failure of the tool. The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel in a trimmer for grass. When a suitable fishing line for a trimmer is found and purchased, you can begin to consider the ways to wind it on the coil.

Choosing a cord

There are general rules for choosing a fishing line for a trimmer for grass.

  • If a trimmer for grass for grass is a gasoline engine with a power of less than 500 V, choose a working thread with a thickness of 1.3 mm.
  • For a motor for more than 1,000 in, use a cord with a diameter of 2 mm.
  • If the working shaft is curved, a 2 mm thick thread is suitable. For direct. 2.4. 3 mm.
  • When choosing a fishing line for a trimmer, take into account the section. For young and thin grass, use a cord in the shape of a spiral. If you cut the thickets of weeds, install a fishing line for a trimmer with a jagged section. Use a rectangular thread to give the lawn a flat surface, but such a thread is not strong. To eliminate complex thickets, use a fishing line for a round section with an internal wire.

It is better not to change the fishing line for a trimmer for a metal wire. This can disable a tool, as well as injure in the event of a break.

Types of trimmer heads

A mowing head for grass is a cylindrical case in which a coil (bobbin) is inserted with a fishing line in it (cord). This design can be installed both on gasoline and electric trimmer. The heads differ in the method of refueling and supplying the cord and there are 3 types.

  • Automatic. The cord is supplied after the user reduces engine speed. Although the automatic supply of the fishing line is convenient if large volumes of work are performed, such rods have one drawback. a large thread consumption.
  • Semi.automatic. Using this type of head does not require complicated manipulations from the user. The principle of their operation is arranged so that the cord is automatically lengthened at a time when the device works at full speed. It is enough to slightly hit the trimmer’s head for the grass on the ground (this removes the cord lock), and the fishing line for the trimmer, due to the centrifugal force, moves out of the bobbin, after which it is cut to the desired length with a knife located on a protective casing.
  • Manual. For lengthening the cord, the device is required, after which the fishing line for the trimmer is handed out manually.

Based on the above, semi.automatic bobbins are the most optimal option. It should also be borne in mind that the coils for a trimmer for grass are one.built (used only to trim the grass) and two.string, which are used to mow high grass and small, with thin stems of shrubs.

Read also: Lerka or Dick, what’s right

How to remove the coil and replace the fishing line for the trimmer

The owners of the trimmers, mainly beginners, confuse, bordering on panic, when it becomes necessary to change the cutting tool or fishing line for a trimmer in a reel. Very often, when trying to unscrew the mowing head, users simply make it unusable, not suspecting that it is unscrewed in the opposite direction. So that this does not happen, if you need to replace the tool, it is recommended to familiarize yourself with the step.by.step instructions given below.

  • Before refueling the fishing line for the trimmer to the coil, drown out the engine of motorcycles or de.energize the ethletric trimmer for the grass to avoid injuries that may occur in case of accidental rotation of the cutting tool.
  • Unscrew the nozzle mounted on the gearbox shaft. To do this, the shaft must be fixed by combining holes on the puck and on the axis, and inserting a metal rod or screwdriver into them.
  • Unscrew the nozzle. You should know that the thread on the shaft is left. Therefore, to twist the coil of the trimmer for the grass should be right, that is, clockwise.
  • Disassemble the mowing head. Most often, the head cover is attached to the fixers. To remove it, you need to drown these latches into the case, pressing the edges of the lid. If your trimmer has a semi.automatic mowing head, which has a button from below, then disassembling the nozzle should be done carefully, since you can lose a spring that sometimes flies away when removing the cover.
  • Cut the required amount of fishing line. Usually its length is 5 meters. Use the cord of the diameter that is indicated in the instructions for the tool. It is not recommended to exceed the maximum diameter of the fishing line, since this will lead to increased load on the engine and greater consumption of gasoline.
  • Find the middle of the segment of the cord, folding it in half. You will get a loop.
  • Special grooves are cut out inside the coil (there may be holes). Insert the loop from the fishing line into this groove.
  • Wind a fishing line for a trimmer to a coil, turning it counterclockwise. You need to refuel the cord as evenly as possible, the turns should be laid without ceiling and with good tension. When the winding is finished, leave the free ends of the fishing line about 20 cm long and fix them in the grooves located on the sides of the coil.
  • Collect the braid head. Before you finally collect the nozzle, do not forget to insert a spring and washer (if it is available). Install the coil in the case, and prone the ends of the cord through the holes or eye.
  • Dress the lid and fix it with latches.
  • Screw the nozzle back to the gear shaft, also fixing it with a screwdriver. Tighten the coil of the trimmer for the grass will need to go to the left (against h. Arrows).

Preliminary preparation

First, for winding the fishing line, it is necessary to remove the coil (bobbin, spool) from the trimmer for the grass. certain acts will depend on the difficulty of configuration and the type of product itself:

  • Small electronic trimmers for grass with a working location of the motor and coils at the bottom, usually have side buttons on both sides of the bobbin. With the simultaneous press on their highest part of the coil, coupled with the internal contents for winding the fishing line is disconnected, while the lower one remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring does not jump out and not be lost;
  • Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, usually have coils with a special lamb: in similar structures, you should with one hand with one hand to hold the rogue in a motionless position, and the other counterclockwise twist the fixing bobbin on the staging barack. How to refuel a fishing line for a trimmer trimmer for grass? How to refuel a fishing line for a trimmer to a trimmer coil for grass. It is clear how to charge a fishing line for a trimmer for a trimmer for grass. After disconnecting the nut, the whole bobin is removed.
  • Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and with unhurried rotation, such mutual placement is achieved when the screwdriver enters the holes and the bobin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third options of coil, depending on the design, are versed in different methods. In the bobbins with a lamb, lamb is twisted, in the reels with the latches, the fixers are pressed and one part of the coil is freed from the other. How to refuel a fishing line for a trimmer in how it is a correct cheap fishing line for a trimmer. 2. On your site. If the halves of the spool are connected by thread, then they are quite turned with their hands in the back sides until they are completely developed.

Winding process

If your coil is designed to work with only one antenna, then everything is simple. It is necessary to rewind 2-4 m of the line (depending on the size of the coil), find the hole for attaching the line on the inside of the coil, insert one end of the line there and start to wind the fishing line for the trimmer in the direction opposite to the direction of rotation of the coil on the trimmer. On the inside of the coil, as a rule, it is indicated by the arrow in which direction to wind the fishing line for the trimmer. Having wound a fishing line for a trimmer, we leave a small piece to open it. We fix this piece in a special groove located on the inner side of the coil and designed so that the fishing line for the hair trimmer does not spin when collecting the coil. If there is no such groove, you will need to hold a fishing line for a trimmer of hair growth with your finger to prevent it from spinning with the further assembly of the coil. Then, take the outer part of the coil and pass the outer part of the hair into the available hole, collect and set the coil back to the trimmer for the grass.

Why your line keeps slipping out and unraveling (Solution) / Jon’s DIY

If the coil is designed to work with two antennas, then follow the following actions. Inside the coil we see how many grooves are available for winding the line. It can be one or two. If there is one groove, then both antennas are wound along one groove. If there are two grooves, each antenna is wound on its own groove. The coil with one groove should have a through hole in which the fishing line for the trimmer is inscribed. Wipe 2-4 m of the hair, take it through this hole so that on each side of the hair is shy equally. At the same time, we wound two antennas of the hair growth line in one direction, the opposite direction of rotation of the coil on the trimmer and coinciding with the direction indicated by the arrow on the inside of the coil. We leave a small hair line for the trimmer promoted, fix the ends in special grooves, and if they are not, we hold our fingers. Insert both ends into the holes on the body of the outer coil. We collect the coil and attach it to the trimmer.

If there are two grooves, add a piece of a hair growth line 2-4 m long, insert a loop obtained at the bending point into the groove between the two grooves and at the same time wrap both ends of the hair growth line into each groove. The following steps are similar to the previous version.

There are also coils on which the fishing line for the trimmer is pierced through the through hole inside. After that, the ends of the hairline, without winding, are completely stitched through the holes on the outer body of the coil, the coil is assembled, and the button is usually pressed, so that the lines can be released during the operation in the form of wear, turn the button. The fishing line for the trimmer is wound inside. At the same time, the turn in the “wrong” direction will not work, since it can only rotate in one direction. If you set up, you can wind a fishing line for a trimmer on such a coil without even splitting it. You just need to connect the through hole of the inner drum with holes on the outer body of the coil, and then insert a fishing line for a trimmer into them.

Which line for a trimmer for a trimmer for grass is better?

To select a fishing line, you need to pay attention to the thickness of the cord, the shape of the section, the material of the thread itself. The thickness of the cord should be suitable for the parameters of the selected tool

Too thick fishing line for a trimmer will confuse the thread on the coil, promote the overheating of the motor and rapid wear of the bushings

The thickness of the cord should be suitable for the parameters of the selected tool. Too thick fishing line for a trimmer will confuse the thread on the coil, promote the overheating of the motor and rapid wear of the bushings.

According to the thickness of the fishing line for a trimmer, it is conditionally divided into several types:

  • Within 1.2. 1.6 millimeters. Suitable for models with a capacity of up to 0.5 kW. Often these are electric ships;
  • From 2 mm to 2.4 mm. This size is the most popular, because it copes with young and tough grass. Installed on tools with a capacity of about 1 kW;
  • From 3 mm to 3.2 mm. Suitable for units on gasoline, which will mow thick stems of weeds;
  • Cort 4 mm. Copes with overgrown sites.

To determine which fishing line for a trimmer is a braid, you can use one of the ways:

  • The thickness of the court must be indicated in the user’s instructions;
  • Producers often apply important data to the bobbin, including the permissible diameter;
  • Stick a fishing line for a trimmer to the output. It should take place troublesome.

The section forms also pay attention to, since the thread does not cut, but interrupts the grass stem. Types of cords in the form of section:

  • Round. A universal option that allows you to cut fresh and dry vegetation;
  • Multifaceted for 3-6 faces. You can mow tough and thick stems. But the consumption of such material is quite large, therefore it is suitable only for specific purposes;
  • Curly. It has the appearance of a star or square with recesses. The first is used to cut fresh vegetation.

A fishing line for a trimmer for a trimmer for grass is made from different materials:

  • The nylon fishing line for a trimmer made of polyamide or propylene is most suitable for motorcycle. Inexpensive options with polyethylene in the composition. They are not resistant to loads, do not withstand frequent changes in temperature conditions. A polypropylene fishing line for a trimmer will last longer, if you first soak it in the water for half an hour;
  • The most durable strings with particles of aluminum and diameters of about 4 millimeters are considered.

You can not use metal wire or cables that can damage the tool.

Based on the described parameters, you can choose the optimal fishing line for a trimmer to care for the house territories.

How to wind a fishing line for a trimmer to a reel: the first method

Before winding, you need to open a trimmer head.

First, the amount of fishing line, which we will wind up on the bobbin, is determined. The skein should not go beyond the sides, otherwise the coil will not be inserted into the casing.

After determining the length of the fishing line, you can start refueling in the bobbin:

The fishing line for the trimmer is folded in half, one edge is left longer 10-15 centimeters. Spulk is divided into two parts by the central side. It has a groove for a court that needs to be bent in half

For refueling you will need an effort; The direction of winding is important. There should be an arrow or an inscription on the bobbin indicating the side of the winding

If there is no pointer, there should be an arrow on the head of the mowing. The cord is wound in the opposite direction; You need to wrap the fishing line for the trimmer as neatly as possible, the thread should be as stretched as possible; Upon completion of the styling, the short end of the thread is fixed, it is inserted into the corresponding diameter of the groove on the side of the coil. The long edge is fixed from the opposite side; In a fixed fishing line, you need to cut the edges with a gap of about 10 centimeters; The seasoned coil is installed in a mowing head. The edges of the thread are pulled from the fixing grooves; The lid is put on and fixed with latches. It should be completely fixed.

How to refuel a fishing line for a trimmer in a coil of a trimmer for grass: the second method

Some coils can be seasoned and differently. Two pieces of thread are charged, and not one folded in half.

  • As in the first case, the length of the new thread is determined;
  • One edge of the court is bended by crocheted;
  • At the bottom of the bobbin there are holes for fixing the fishing line, where the bent edge of the thread is inserted;
  • The thread is wound behind the arrow on the coil. The winding level should not exceed the diameter of the coil;
  • It is also done with the second cell of the bobbin;
  • The edges of the fishing line that stick out from the holes, you need to cut. You can just turn on the braid, during rotation they will cut the knife. The fishing line for the trimmer is cut by hand with scissors if the diameter of the court is too large.

Some tips on the correct refueling of a string in a trimmer for grass

If the coil allows you to wind fifteen meters of thread, then you should not wind so much, there is enough ten, that is, if you fold in two layers, you get five meters each. With another capacity of the fishing line, it is worth using the same rule.

In the case when an ordinary round thread is used, it is better that it is 3.3 mm with a diploma. If this is a figured fishing line for a trimmer, then its thickness should be less, for example, 3 mm.

It is better to wrap both segments of the fishing line at once on the spool, and you need to start with its bending

It is important to prevent overlap in the direction of the arrow. It is also important to be able to perfectly pull the thread. There will be a thread to be pulled, it may go over

If not unit, can twist. In order not to cut your hands on the figure thread yourself, you should wind it in gloves

There will be a thread to be pulled, it may go over. If not unit, can twist. In order not to cut your hands on the figure thread yourself, you should wind it in gloves.

No need to leave the ends of the fishing line long. This can lead to its tightening.

Gasoline works, but does not twist. How to start diagnostics of motorcycles |

If the cutter does not start or delay immediately after starting, all the main components and nodes should be checked sequentially. The test algorithm is as follows:

  • Fuel tank (fuel quality);
  • Candle and candle channel;
  • Air filter;
  • Fuel filter;
  • Breath;
  • Exhaust channel.

Why is the carburetor pouring on the trimmer Trammers for grass and chainsaws Husqvarna adjustment adjusting the Husqvarna carburetor if: the period of the engine is completed (after using the first 4-5 liters. fuel); The quality of the components of grief has changed.

How to refuel a fishing line for a trimmer to a trimmer coil for STIHL grass a gasoline or electric trimmer for grass. An indispensable assistant in the arsenal of a modern summer resident or homeowner. Thanks to these garden devices, you can easily mow even a large garden. After buying this tool.

How to wrap a fishing line for a trimmer to the reel of an electrimmer ST For a comfortable mowing vegetation in a personal plot of optimal choice of trimmer characteristics, it will not be enough. For both an electric trimmer for grass and a gasoline brush, a cutting tool should.

These nodes are often source of serious problems that can be solved after a thorough inspection.

Checking the fuel mixture

Check the presence and quality of the fuel mixture before starting the engine braid for grass. Do not save, do not be greedy and do not be wise in this matter. Repair or replacement of the piston group will cost you too much (sometimes up to 70% of the cost of a new tool). It is necessary to prepare the fuel mixture strictly in accordance with the instructions. Calculate its number from real needs. Excess gasoline, remaining after work, eventually loses its quality.

Diagnose a candle and a candle channel

If the quality of the fuel mixture is not in doubt, and the brush stops when starting, then the cause may be a filled candle. Here, ordinary candle keys will cost the repair (probably every motorist has) and spare candles.

  • We twist the candle and wipe it;
  • Dry it thoroughly (do not buy);
  • Excess fuel in the chamber is drained through the hole for the spark plug and dried;
  • We remove the old candle from the deposit with a folder or a ladies’ folder;
  • Install a gap at a distance of 1 mm (you can check any coin);
  • We return everything back to place and try to launch a trimmer for the grass.

Dry the channel for at least 30-40 minutes. Otherwise, there is a risk of refueling a new candle.

If the candle works, the outlet is completely dry and you do not want to start the brush completely, grease the threaded connection with gasoline. It should be a little moisturized. No matter what a wonderful spark produces a candle, a dry camera simply does not light up.

If the engine of the trimmer for the grass still does not start, the absence of sparking should be excluded due to poor contact between the spark plugs and the high-voltage wire. If the connection is good, but there are still no sparks, most likely your ignition block flew by. Here you cannot do without a master, because the subject is not repaired, but is sold as a whole.

Diagnostics of filters of bushreases

Another reason is that a gas braid for grass can be an air filter. To turn it off, try to remove the filter and start a trimmer for grass without it. If possible, you will have to replace the air filter with a new or at least blow and carefully clean the old.

A gas trimmer for grass may not start due to contamination of the fuel filter. This is the next step in our algorithm. Here we check the state of the filter element and, if necessary, change it to a new. When replacing, try not to leave the suction pipe completely without a filter, which is prohibited by any operating instructions. Success can lead to the repair of the piston group of the engine.

Endless and comfortable mowing head for motorcycles

To correctly find how many meters of fishing line you will need for a certain coil, you need to wind it into a bastard with such a macar so that the skein does not exceed the dialect of the sides. If the fishing line for the trimmer will look out beyond the edges of the coil, you cannot stick it into the casing. When you were due to the length of the material, it must be tucked in a bobbin, so do the following.

  • It is necessary to fold the fishing line for the trimmer twice so that one end is 10-15 cm longer from the other.
  • See that the bobbin is divided into 2.4 parts by the central side, from which charging begins. Find a groove from him and stick a cord there, bent twice, putting a small effort.
  • It is fundamental to find in which direction the fishing line for a trimmer is wound on the reel. If you look closely, you can find an arrow on the bobbin or an inscription with an arrow indicating which direction the winding should be carried out. There are times when there is no arrow on the coil. Under these circumstances, you will see on an arrow drawn on a mowing head, and wind the cord in the opposite direction.
  • Winding should be carried out neatly, a turn to the turns, with the highest thread tension.
  • If the cord laying is completed, it will be necessary to fix at first the small end of the fishing line, inserting it into the groove suitable through the crossbar on the side of the coil.
  • The 2nd end, the one that is more authentic, is attached into the groove on the back of the squabble.
  • After fixing the fishing line, cut its ends, leaving the allowances about 10 cm.
  • Next, you need to install a refueling coil in a mowing head. For this purpose, alternately inserting and pulling the thread on the weekend of the head, put the bobbin in the casing, then, by applying the required force, stretch the fishing line for a trimmer from fixing grooves and tighten it.
  • Now of course to put on the lid and fix it by means of latches.

5 Reasons to Take the Trimmer Guard OFF Your Weedeater

In some coils, the 2nd method of fixing the cord is provided: you can charge 2 segments of the thread, kneading the 1st, folded in half. The change of fishing line occurs according to the subsequent method.

  • Ahead of time before changing in other words, to charge the latest thread into the coil, determine how many meters it will be needed by the method considered above.
  • Bent one end of the cord type of hook.
  • Find a hole created to fix the fishing line on the day of the bobbin, and stick the end of the thread bent by a loop there.
  • To wind the cord is required according to the direction of the arrow to the desired level that does not exceed the dialect of the coil.
  • Make the same acts for the 2nd cell of the bobbin.
  • The assembly of the head is no different from the method that was given when the refueling of the bobbin was considered folded by twice as a piece of fishing line.

For Shtil Motokosi, there is a very ordinary and frisky method for changing the fishing line without disassembling the mowing head, to study which, of course, by watching this video.

The ends of the cord sticking out of the holes in the casing is cut to the desired length, already when the part is installed in the trimmer. This is of course done with 2 methods:

  • By turning on the trimmer for the grass (when rotating, the ends of the fishing line will part on the knife, fixed for this purpose on the protective casing);
  • Cutting the excess ends with scissors with such a macar so that they do not touch the casing body.

The 2nd method is used if the passage, if I had to put the cord of a huge diameter, and the tenderly knife is not able to shorten it.

If the thread is charged into a mowing head, but the length of the protruding ends of the cord is missing, then before starting the device they must be lengthened. this applies to the head with manual adjustment. But there are cases with the use of an automatic mowing head, when, due to the insufficient length of the protruding ends of the cord, they are not lengthened by automatic. Here you need to turn off the unit (on the electronic apparatus, you certainly need to pull the fork out of the outlet), manually press the button located at the bottom of the part, and stretch out the little fishing line. After this procedure, the cord will again be able to advance due to centrifugal strength, if you put the greatest spindle speeds.

No matter how thick the fishing line for the trimmer you should be kept in your head: in order not to interrupt the work and not even change the cord, you should avoid areas where the working tool touches hard surfaces (pebbles, borders, thick dry branches, etc.D.).

Some trimmers users are wondering: how can the cord can be replaced by deflot used in this type of apparatus? They begin to conduct dangerous experiments, installing iron or copper wire, iron cables or strings in a mowing head, an additional mundane fishing fishing line for a trimmer.

If you install a cable of metal from metal, then a trimmer for grass is converted into a dangerous device not only for the user, and for others. This fact is clarified by the fact that at one time the unit of the metal cable will be evenly chopped, its ends are released, and small pieces of wire will fly in different directions at high speed.

Similar occurs using a metal or copper wire, only with the difference that the torn pieces will be larger, and be a significant injury.

The dimensions of the fishing line

The diameter of the trimmer fishing line is the most important parameter of the mower. Indeed, in the working part of the tool there are holes of certain dimensions, and not every fishing line for a trimmer will crawl into them. If the line for the trimmer is selected incorrectly, then this leads to increased loads on the drive.

Consumable materials with a diameter of 1.4 mm to 4 mm are presented on sale. The diameter is determined by the model of the trimmer for the grass and its power:

  • For compact units with a capacity of up to 1 kW, processing small areas, fishing lines with a thickness of 1.4-2.4 mm are recommended.
  • Elektokos or trimmer for grass working on gasoline is equipped with thicker cords-2.4-3 mm.
  • The most formidable devices that can clean large areas of the aboveground part of shrubs and young trees have a vein of 3-4 mm.

We carry out the winding of the fishing line

Sentlessly completed disassembly of a spray coil without losing its spare parts allows you to go to the main task-winding into a fishing line coil. Technological features of the design of the spool and the number of working antennae determine the sequence of actions.

Coil with one working osik

The easiest option and a simple sequence of actions:

  • The dimensions of the bobbin and the length of the original factory winding determine the length of the fishing line recommended for winding. 2 5 m.
  • One end of the fishing line is inserted into the fixing technological hole located inside the spool.
  • The fishing line for the trimmer is wound on the drum in reverse rotation of the spray in the trimmer product direction. as a rule, on the inside of the bobin, the arrow indicates which direction the winding is carried out.
  • A small section of the fishing line is left free to output it. it is fixed in a specialized border on the inside of the bobbin, designed to keep the winding when assembling a spool in working condition.
  • The left end of the fishing line is passed through the hole of the outer part of the bobbin.
  • Half of the bobbin are collected and put on the bar of the trimmer device.

Two working antennae

In this type of spools, the number of grooves for winding the fishing line lying on the inside of the coil should be determined:

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.captable coils, the fishing line for a trimmer stretches into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. inside the arrow is usually indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing line are threaded in them or hold their free arm fingers, spread into the through hole of the outer half of the bobin, the spool is closed and attached to the bar of the trimmer product.

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound each in its own groove, fixing the antennae and assembly of the coil is similar to the option considered above with one groove.

The first implementation of this procedure may seem long and quite time.consuming, but over time and experience, this task will be solved much faster and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

After the cutting thread as a result of the work is worn out, turn off the braid and remove the lid on the mowing head. Pull out from the slot of the forest, stretching it to the desired length, and insert it again in the slot. The amount of material wound on the coil is enough for 5-10 cycles of work depending on the model of the device. When you install the lid in place, carefully look at whether the grooves were clogged where the latches are inserted, if they are clogged, then carefully clean them.

When the fishing line for the trimmer is worn out, you need to disassemble the braid head again, pull out the coil and wind up the work fishing line for the trimmer again.

Trimmer for grass is the most common unit used to cut grass and cut small shrubs. This device is distinguished by its simplicity in maintenance, simple management during operation, and even women cope with it even a small weight. It is no secret that for the high.quality performance of herbal mowing work, the correct selection of a cutting tool is required. As the latter in trimmers, special cutting nozzles (wheels, knives) or trimmer heads with fishing line inside are used. Nozzles and a fishing line for a trimmer are a consumable tool, but if the knives can be sharpened, then when spending the fishing line you need to replace it. In this article, we will tell you in the most detail how to correctly replace the fishing line for the trimmer.

How to remove the coil and replace the fishing line for the trimmer

The owners of the trimmers, mainly beginners, confuse, bordering on panic, when it becomes necessary to change the cutting tool or fishing line for a trimmer in a reel. Very often, when trying to unscrew the mowing head, users simply make it unusable, not suspecting that it is unscrewed in the opposite direction. So that this does not happen, if you need to replace the tool, it is recommended to familiarize yourself with the step.by.step instructions given below.

  • Before refueling the fishing line for the trimmer to the coil, drown out the engine of motorcycles or de.energize the ethletric trimmer for the grass to avoid injuries that may occur in case of accidental rotation of the cutting tool.
  • Unscrew the nozzle mounted on the gearbox shaft. To do this, the shaft must be fixed by combining holes on the puck and on the axis, and inserting a metal rod or screwdriver into them.
  • Unscrew the nozzle. You should know that the thread on the shaft is left. Therefore, to twist the coil of the trimmer for the grass should be right, that is, clockwise.
  • Disassemble the mowing head. Most often, the head cover is attached to the fixers. To remove it, you need to drown these latches into the case, pressing the edges of the lid. If your trimmer has a semi.automatic mowing head, which has a button from below, then disassembling the nozzle should be done carefully, since you can lose a spring that sometimes flies away when removing the cover.
  • Cut the required amount of fishing line. Usually its length is 5 meters. Use the cord of the diameter that is indicated in the instructions for the tool. It is not recommended to exceed the maximum diameter of the fishing line, since this will lead to increased load on the engine and greater consumption of gasoline.
  • Find the middle of the segment of the cord, folding it in half. You will get a loop.
  • Special grooves are cut out inside the coil (there may be holes). Insert the loop from the fishing line into this groove.
  • Wind a fishing line for a trimmer to a coil, turning it counterclockwise. You need to refuel the cord as evenly as possible, the turns should be laid without ceiling and with good tension. When the winding is finished, leave the free ends of the fishing line about 20 cm long and fix them in the grooves located on the sides of the coil.
  • Collect the braid head. Before you finally collect the nozzle, do not forget to insert a spring and washer (if it is available). Install the coil in the case, and prone the ends of the cord through the holes or eye.
  • Dress the lid and fix it with latches.
  • Screw the nozzle back to the gear shaft, also fixing it with a screwdriver. Tighten the coil of the trimmer for the grass will need to go to the left (against h. Arrows).

Is it possible to make a coil for a trimmer for the grass with your own hands

On sale there are a large number of trimmer heads (not automatic), which have a low price and good quality. But sometimes situations arise, for example, in the country, when the trimmer coil broke, and its repair is impossible, the store is far away, and you need to mow. In this case, you can quickly, literally in a few minutes, make a simple trimmer nozzle to fix the fishing line from ordinary plywood 10-12 mm thick.

  • Take a piece of plywood or textolite and draw a circle with a diameter of about 14 cm on it.
  • Cut the disk with a jigsaw or hacksaw for metal.
  • Drill a hole in the center of the disk, suitable in diameter to the gear shaft. Do not forget before installing a disk on the shaft, put a puck on it.
  • You can fasten small corners along the edges of the disk or make 1-2 holes on the opposite sides. They will serve for refueling fishing lines in them.
  • To fix the fishing line for a trimmer, you can screw several screws into the plywood.

Such a homemade mowing nozzle is fixed on the shaft with a nut. Twist or unscrew the nut without fixing the shaft will not work. To replace the cord, it will be enough to release the screws, insert a segment of the fishing line of the required length and press it again.

Also, a mowing nozzle for fixing the fishing line on it can be made from a metal sheet. How to do this can be understood from the next video.

| Denial of responsibility | Contacts |RSS