STIHL 180 STIHL Gasoline Saw Repair Doesn’t Start. STIHL 180 chain saw non-starting Reasons

“MASTER PLUS” repairs of any complexity in the city of Tambov. Serove

Posted in 9 Комментарии и мнения владельцев

I had the same problem, a brand-new saw after the 2nd refueling did not start, what did not find in the tips, unscrew the plug, look at the piston, but do not do it if you feel that there is compression, starter rope pulls with effort. And our client was left to the outrageous simple, filled the plug and for inexperience. Drain all the gasoline from the barrel. Unscrew the plug, check the spark, after the need to drain the gasoline from the cylinder, for this purpose turn the cylinder down gently jerk the starter cord draining the excesses about 10 times. After that, I put in the same position for 5 minutes for ventilation and drying, screw the plug. We fill the tank with gasoline and oil in the marked proportions. I put the lever in a cool startup pulling twice smoothly 3rd jerk, started from the third jerk. I was just about to take it to the service.

The same problem, new saw, the 2nd refill ended starting. Checked, carburetor overflow, spark plug in gasoline, after drying spark appeared. After purging the cylinder, as described in the manual, tried to start. Started with choke in “cold start” position, flashed once, put choke in start position, wouldn’t start. Unscrewed the spark plug and it was in the gasoline again. Blow on the starter a hundred times, the discrepancy is the same. And here comes your website, after reading the advice Oleg (regarding blowing starter in the upside-down position of the saw) tried, from the cylinder and carburetor poured about 10 grams of gasoline. Then attached a candle (without screwing) to the tip, put the choke on the starting position, more blowing. Assembled, primed and started. So thanks to Oleg for the good advice !

STIHL STIHL 180 chain saw starts and stops.

STIHL lawn mower fs 55 gear replacement bearing if you often face the need to mow grass in this area, then specifically for this purpose use modern devices on the model of trimmers or lawn mowers. Among other solutions on today’s market are lawnmowers, through which you can maintain the lawn in a well-groomed condition. How to start the STIHL grass trimmer STIHL fs 55 STIHL fs 55 grass trimmer: overview, features and Techniques such as lawnmowers and grass trimmers are no longer unusual in the gardeners’ arsenal. If you, too, want to care for the lawn in a modern way, then you should consider these units. With their help, you can sometimes cut the lawn and notch bushes, and remove overgrown with how to replace the head on the trimmer STIHL trimmer for grass, whether it is gasoline or electronic, is the only true solution to mow grass in inaccessible places, which can not cope with a wheel mower. as a cutting tool in trimmers are used iron knives or a special line for trimmer, which is tucked into the grass trimmer spool. Alas, unfortunately, trimmer heads in the process of.

STIHL 170 /180 DOESN’T START. REASONS.

The main Causes of not starting the engine.The spark plug does not light (Change the spark plug).

Oleg, thank you very much what is left to do for our client is excellent simply!In a nutshell This saw is 6 years old and I use it 10 times a year. Started badly and at a certain point, that’s it Took your advice. Failed to dare, sorry for the cost of the newest candle and air. filter, but I think in the future may need.Thanks additionally. Honored readers. Always start with the easy ones in most cases the problem is in the small stuff. To all the fortune in the repair!

Thanks to Oleg for the good advice. Such advice nunuyut should be prescribed in the instructions. The new saw didn’t start for the 3rd time, alas, the spark is still there, alas, the spark plug gets stuck. Did what remains to do our customer because Oleg wrote, started with the first jerk.

Starting the STIHL 180

In order to start the STIHL 180 chain saw in the cold, you need to follow the procedure specified by the manufacturer in the STIHL 180 chain saw manual, namely:

    Turn the ignition switch and set the engine lever to its lowest position (in this position, the air damper carburetor STIHL 180 closes the air from the air filter and the throttle is fully open, thus enriching the fuel mixture);

Pull the starter grip several times until the first spark has gone off (this first spark signals the fuel mixture has entered the cylinder and the chain saw is ready to start);

STIHL MS 180 chain saw does not come standard with any additional features to facilitate starting.

Below you can see how to start the STIHL 180. The video covers all the main points in detail, and the author’s Комментарии и мнения владельцев, allow you to understand the whole process to the smallest detail.

Why won’t my chainsaw Start. stihl 180

Starting the chain saw after the winter

stihl, chain, start

If you have any questions about how to start your STIHL chain saw after the winter, you should take a look at the following tips. Some customers have reported that after a short period of standstill, it is often impossible to start the machine. Early setup is essential for a successful start.

You need to drain the fuel before storing it and then start the engine and catch up with the fuel that is still in the system. Preparation is necessary so that the membranes do not stick together during storage. It’s a simple operation to start the saw after the winter. If you’re still not sure how to properly clean your garden, you can do a lot of cleaning work for the winter. you should know that it is easier to do this if you add 2 ml of fuel mixture to the cylinder through the spark plug hole before starting. This can be done with a syringe.

General information

The performance of this saw is a great source of pride for the German manufacturer. This unit is a tool that is designed to do a small amount of work. The tool is positioned for domestic use, which confirms the intensity of its operation, which should not exceed 20 hours per month. With a machine like this in your possession, it’s no problem to keep your garden tidy, collect firewood for the winter, or clear lawns. At the same time it can help you with other tasks, where there is no need to perform complex manipulations.

Main Features

The saw in question can be considered a compact version, because its weight is only 3.9 kg. At the same time it has a large capacity oil and fuel tank. The two-stroke engine helps the device to perform its working functions, the power of which is enough for simple tasks. In addition, during operation, this tool does not create a lot of noise, the level of which does not exceed 98 dB. For easy understanding it is enough to say that human speech creates noise at the level of 76 dB.

  • STIHL 180 chain saw with 2.6 watt power. This would normally be sufficient, keeping in mind that we are talking about a tool for domestic use.
  • The oil tank has a capacity of 0.145 liter, and the fuel tank has a capacity of 0.25 liter.
  • Bar size is 350 mm, pitch 0.325″.

Winding motor

As in the case of other saws, the role of the main device, which provides the start, is performed by the carburetor. Taking a closer look at the carburetor, which is equipped with a chain saw STIHL 180, it should be noted that it has a single adjustment screw. In other words, it is a kind of idle speed adjustment screw. The nozzle that is completely loaded is stationary at all times.

In other words, it is not adjustable. There is no way to influence the full load in any way. It is also necessary to pay attention to the factory settings, which cause the air-fuel mixture to be fed directly to the engine. And this principle is maintained regardless of the operating conditions of the tool.

Why a chain saw does not start or stops. main reasons

A number of different factors may be among the reasons why a chain saw starts and stops or refuses to start at all. In this case, trying to understand what and why she does not want to start should be performed from sober reflection of the appearance of this nuance. As a result, we have a set of interconnections:

  • The chainsaw does not start well due to the wear and tear of the starter system.
  • Overheating of the mechanisms has happened, which is more affected by the Chinese gasoline saw of low performance
  • There is no way to start because the spark plug is dry or damaged;
  • The tool did not work for a long time, for example, if it is impossible to start after winter without using the saw for its intended purpose.

It also happens when the chainsaw simply stalls for no clear reason, not wanting to start, no matter what the user does. In this option, to determine the cause, it is better to contact a specialist “KosiKosa”, which will conduct the necessary testing and, if necessary, perform repairs, as well as, offer elements to improve the performance. This can be a good chain for an inexpensive chainsaw or spare parts to replace the failed links of the ignition system.

To summarize

In fact, as you can see the causes of failure STIHL chainsaw 180 enough and at the same time solutions to this problem as well is not little. If you are faced with this situation, then simply follow all of the above written recommendations and then, for sure, you will be able to repair your device and it will please you with its work for many years to come.

Don’t start with a chainsaw 180? Causes and Solutions!

Today, the STIHL manufacturer is the leader among other companies that produce equipment for agricultural and construction work. The products of this manufacturer are known not only for their high level of quality, but also for the optimal price policy and the power of its models. It is one of the world’s most renowned companies.

It is probably quite difficult to meet anyone who does not own a chainsaw from this brand. But what about six people out of ten? And no wonder, since Calmstress chainsaws represent strength along with sleek design. But, unfortunately, such giants of technology sometimes fail and require some kind of repair. Today we take a look at one of the moles of this manufacturer, namely the STIHL ms 180 chainsaw. Read about the STIHL ms 660 chainsaw here. So, let’s begin.

No spark on the STIHL 180 chain saw

The main problem with the STIHL ms 180 chain saw which prevents it from starting is the lack of sparkling between the electrodes on the ignition spark plug. You can find signs of this malfunction by unscrewing the spark plug and taking a look. If you see during inspection that the spark plug is wet, you should start looking for the cause of lack of spark on the ignition spark plug.

The first thing to do is to check the service life of the battery.

It is easy to do this. The spark plug is inserted into the cap of the high-voltage cable and pushed to the engine cylinder, after which the starter is turned for several times, if no spark is seen between the electrodes of the spark plug, it means that the ignition module is defective or faulty.

Check the spark plug for ignition when the ignition is on.

In order to find out for sure that the problem is in the ignition spark plug, it is necessary to check with a proper analogous method. if the spark appeared as a result of the revision, the problem is found and the spark is replaced with a new one to eliminate the malfunction.

Briefly about the main thing

This model is the pride of the German manufacturer and is a direct tool, designed for a small level of work. It can be used for no more than twenty hours a month. This wonderful device will easily help you to cope with the care of the garden, to prepare wood for the winter (see how to cut a tree), to make cleared areas, as well as will be indispensable for other areas, let’s say, simple manipulations.

We can say that these mini chainsaw models, as they have a small weight, which is 3.9 kg, they do not have a large mass of both oil and fuel tanks. The manufacturer has equipped this device with a two-stroke engine with enough power to do light work.

In addition, it is quite quiet, as during operation the noise level does not exceed ninety-eight dB. To give you a better understanding of the volume itself, just compare its noise to spoken speech, which has a value of seventy-six dB.

The power output of this model is 2.6 watts. It is worth noting that this is quite a significant level of strength, given that this is not a professional chainsaw. The oil tank has a capacity of only 0.145 liters, and the fuel tank. 0.25 liter. Thirty-five-millimeter guide bar with 0.325 inch pitch.

Do-it-yourself carburetor adjustment for the STIHL 180 chain saw

The STIHL MS 180 carburetor tuning is necessary to ensure that the saw works efficiently when used at maximum rpm, and to save fuel. This procedure will require cleaning the air filter and the regular fuel filter.

You can adjust the carburetor of the model using the three regular screws. The L and H screws are needed for presetting the air-fuel mixture ratio, which is regulated by different positions of the throttle valve. The S screw is responsible for fine tuning the idle speed of the chainsaw. The procedure for adjusting the carburetor is as follows:

  • First start the tool and turn the screws H and L in a clockwise direction until they stop. Then slowly turn both screws in the opposite direction for 2 full turns;
  • After that it is necessary to find the maximum revolutions of the motor when the saw works at idle. To do this, the screw L should be turned in alternating directions. No squeaking noises should be heard as the screws are turned. Once the basic maximum rpm has been found, the L screw should be turned slowly a quarter of a turn against the clock hand;

After that you should test the engine alternately at minimum idle and then at maximum rpm.

| Denial of responsibility | Contacts |RSS